Change some key names to upper case and to match the names used in
input.conf bindings. Most of them already were in this form.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33382 b3059339-0415-0410-9bf9-f77b7e298cf2
Due to libavcodec changes vo_xvmc would have needed some modifications
to keep working. However, I think there's little real demand for XvMC,
so I'll just drop XvMC support. XvMC only supported MPEG-2, making it
of very limited usefulness nowadays, plus the vo_xvmc implementation
was not high quality and never worked particularly well or reliably
anyway.
Change ao_pcm to use the new audio output driver API and clean up some
of the code. Rewrite the logic controlling how playback timing works
when using -ao pcm. Deprecate the "fast" suboption; its only effect
now is to print a warning, but it's still accepted so that specifying
it is not an error.
Before, timing with -ao pcm and video enabled had two possible
modes. In the default mode playback speed was rather arbitrary - not
realtime, but not particularly fast. -ao pcm:fast tried to play back
at maximum video playback speed - mostly succeeding, but not quite
guaranteed to work in all cases. Now the default is to play at
realtime speed. The -benchmark option can now be used to get faster
playback (same as the video-only case). In the audio-only case
playback is always maximum speed.
Instead of strictly limiting the number of total entries in the
internal fifo, make the overall buffer bigger and try to limit entries
based on how many bound commands they're expected to generate. Now
doubleclick and button down events aren't counted for that limit.
Normally the sequence down-doubleclick-up generates at most one
command, so this better matches the quantity we actually want to
limit. Also add a mechanism to clear the button combination state kept
by input.c when the fifo is full; this avoids "stuck button" problems
due to button release events being dropped.
The key combination state clearing is partially based on MPlayer 1
changes by Reimar Döffinger (though overall the effects of this commit
are quite different). It still doesn't make "stuck button" problems
completely impossible; at least if the VO gets closed while a button
was down then nothing will send a button up event or reset state.
The code combining button presses into multibutton commands prevented
single click commands from triggering if a doubleclick event had been
generated from the same button press. As a result using the mouse
wheel to seek worked very badly. Special-case doubleclick events in
the event interpretation code to avoid this issue. This changes the
sequence of generated "keys" for press-release-press-release from
MOUSE_BTN0 MOUSE_BTN0-MOUSE_BTN0_DBL MOUSE_BTN0_DBL to
MOUSE_BTN0 MOUSE_BTN0_DBL MOUSE_BTN0.
"Keys" like MOUSE_BTN0-MOUSE_BTN0_DBL will never be generated now; any
existing configuration files using those need to be changed.
For some reason the -lavfdopts option was documented under MEncoder
options (despite not being MEncoder-specific), and was removed
together with MEncoder documentation in commit d76ad5f227. Restore the
documentation and convert it from its own section to normal option
documentation form. Also fix the example to actually work with current
lavf.
Add option -osd-fractions which enables display of fractional seconds
when showing the current playback time on OSD.
Based on a patch from Christian <herr.mitterlehner@gsmpaaiml.com> but
with several modifications.
Drop support for specifying demuxer types by numeric ID (options
-demuxer, -audio-demuxer and -sub-demuxer). Stop printing the numeric
values in "-demuxer help" output. Convert the list of DEMUXER_TYPE_XXX
defines to "enum demuxer_type".
The XML documentation was badly outdated, with various obsolete,
useless and and sometimes actively harmful advice. Delete a lot of the
obsolete stuff, without spending much effort to replace it for now.
In the FAQ section I removed some questions completely; in other cases
I only removed the answer if I thought the entry might be worth
keeping but the answer would need to be updated.
About the only useful part of the BUGS section on the manpage was a
link to mplayerhq.hu, and that doesn't really apply any more (includes
references to Subversion etc). Remove that section and update/remove
some outdated info.
There were multiple files specific to Zoran support, and they also
depended on internal FFmpeg headers (so it would probably have been
hard to get them to compile now even if you tried). It's obsolete now,
so just drop the whole mess.
dxr2 support had been broken quite a while and nobody noticed. There
were finally commits to fix it in the svn repo, but rather than apply
those I'll just drop dxr2 support.
By now VIDIX is too obscure to justify the amount of code and
complexity it requires in the sources. Although there is no pressing
need to drop it just now from a code point of view, I'll rather remove
it before release than release with VIDIX support and then drop it
later.
Some of the manpage mentions of VIDIX were in "this option supported
for these VOs" lists that looked outdated and failed to mention vdpau
for example. Replace such incorrect lists with a generic "not
supported for all VOs" mention.
Add some notes about BE/LE colorspaces and fix a small typo.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32769 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32741 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove AAC/FAAD2 installation instructions.
There is nothing special about building and installing FAAD2, so there is
no longer a need to keep maintaining instructions for it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32742 b3059339-0415-0410-9bf9-f77b7e298cf2
* sub:
sub/OSD: move some related files to sub/
subtitles: options: enable -ass by default
subtitles: change default libass rendering style
demux_mkv, chapters: change millisecond arithmetic to ns
cleanup: rename ass_* functions to mp_ass_*
subs: use correct font aspect ratio for libass + converted subs
cleanup: some random minor code simplification and cleanup
vf_vo: fix EOSD change detection bug
sd_ass: remove subreader use, support plaintext markup
subtitles: style support for common SubRip tags and MicroDVD
core: ordered chapters: fix bad subtitle parameter
subs/demux: don't try to enable sub track when creating it
subtitles/demux: store duration instead of endpts in demux packets
subtitles: add framework for subtitle decoders
options: add special -leak-report option
subtitles: remove code trying to handle text subs with libavcodec
cleanup: move MP_NOPTS_VALUE definition to mpcommon.h
subtitles: move global ass_track to struct osd_state
core: move most mpcommon.c contents to mplayer.c
core: move global "subdata" and "vo_sub_last" to mpctx
subtitles: remove sub_last_pts hack
options: move -noconfig to option struct, simplify
There are still some problems with -ass. For example some other
subtitle options won't work the same way or at all with it enabled,
and inserting the video filter for VOs that lack native rendering
support won't work with different colorspaces. However I think that
the benefit from styling support outweights those disadvantages, and
also that the "discoverability" of features is better this way; it
will be easier for people who encounter problems to find -noass than
for people who see no styling to find out that they could add it with
-ass.
Enable -ass by default. Also fix other outdated information in the
manpage entries for -ass and -fontconfig.
This really should have been added to the manpage at the start of the
previous decade. There's still bad advice about -playlist in the XML
docs, but I'll remove that later when purging more obsolete/wrong
stuff from there.
Allow negative values of the "deint" parameter and make them select
the same deinterlacing mode as the corresponding positive value, but
without enabling deinterlace on startup. This is useful for
configuration files. Also tweak the overall manpage description of
vo_vdpau a bit to make it sound less as if the VO would be for
hardware acceleration only.
* hr-seek:
input: add default keybindings Shift+[arrow] for small exact seeks
input: support bindings with modifier keys for X input
core: audio: make ogg missing audio timing workaround more complex
core: add support for precise non-keyframe-limited seeks
core: add struct for queued seek info
commands: add generic option -> property wrapper
options: add "choice" option type, use for -pts-association-mode
core: remove looping in update_video(), modify command handling a bit
core: seek: use accurate seek mode with audio-only files
core: avoid using sh_video->pts as "current pts"
libvo: register X11 connection fd in input event system
core: timing: add special handling of long frame intervals
core: move central play loop to a separate function
Conflicts:
DOCS/tech/slave.txt
Add support for seeking to an arbitrary non-keyframe position by
decoding video starting from the previous keyframe. Whether to use
this functionality when seeking is controlled by the new option
-hr-seek and a new third argument to the "seek" command. The default
is to use it for absolute seeks (like chapter seeks) but not for
relative ones. Because there's currently no support for cutting
encoded audio some desync is expected if encoded audio passthrough is
used. Currently precise seeks always go to the first frame with
timestamp equal to or greater than the target position; there's no
support for "matching or earlier" backwards seeks at frame level.
Make "-lavdopts threads=0" mean an autodetected number of threads, and
make that the default value of the option. Also increase the upper
limit of the option from 8 to 16. Add new file osdep/numcores.c which
tries to determine the number of cores available on the machine.
numcores.c is based (heavily modified) on public domain numcpus.c by
Philip Willoughby <pgw99@doc.ic.ac.uk>, downloaded from
http://csgsoft.doc.ic.ac.uk/numcpus/
Add mp_property_generic_option(), a property function that can be used
for generic option-based properties that do not require any action
beyond manipulating the value of the option variable. Currently it
directly implements GET and SET, plus STEP_UP for "choice" options
only. Use it to add a property for -pts-association-mode (not
particularly useful in normal use, but serves as a test).
Add a "choice" option type. Options of this type take a string as
input and set an int option variable to the value corresponding to the
string. The string->int mapping is option-specific and is given in the
option definition. Strings not found in the mapping are rejected as
invalid option values.
Change the option -pts-association-mode to use this new option type
and accept values "auto, decoder, sort" instead of "0, 1, 2". The
change in accepted values shouldn't cause problems as this option is
not appropriate to use in normal user config files.
-novideo is the right way to disable video, and should also work in
more cases now that lavf is used as the default demuxer for more formats
(like AVI; internal AVI demuxer fails with -novideo).
Also change the man page description of -novideo a bit to make it
sound less negative about the chances of the option working.
Some Matroska files have inaccurate ordered chapter endpoints, and so
parts where one chapter should end and the next begin at the same
timestamp were not merged. This resulted in an unnecessary seek over a
minimal distance. Add a heuristic to merge parts with a minimal gap or
overlap between them.
Based on patch by Hector Martin <hector@marcansoft.com>.
Add code to enforce matching pts with video when (re)starting the
audio stream, by either cutting away the first samples or inserting
silence at the beginning. New option -noinitial-audio-sync can be used
to disable this and return to old behavior.
If the option is enabled and all audio has been buffered to the AO,
then the player will move to the next file without waiting for the
buffered audio to drain, while leaving the AO initialized. If the
playback of the next file starts quickly enough (before the AO buffer
empties) then it should continue writing audio to the same AO with no
gap in between.
Further review very welcome, but it is time (and good enough) to add this.
Patch by Gordon Schmidt [gordon.schmidt s2000.tu-chemnitz de] with
changes by Endre Kollár [taxy443 gmail com].
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32527 b3059339-0415-0410-9bf9-f77b7e298cf2
If a specified key is pressed during playback, the current stream is
captured to a file, similar to what -dumpstream achieves.
original patch by Pásztor Szilárd, don tricon hu
Taken from the following svn commits, but with several fixes and
modifications (one obvious user-visible difference is that the default
key binding is 'C', not 'c'):
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32524 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32529 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32530 b3059339-0415-0410-9bf9-f77b7e298cf2
Require DirectFB version 0.9.15 instead of 0.9.13.
This simplifies the build system at the cost of requiring a library
version that was released at the end rather than the middle of 2002.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32251 b3059339-0415-0410-9bf9-f77b7e298cf2
Simplify DirectFB check.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32252 b3059339-0415-0410-9bf9-f77b7e298cf2
Require DirectFB version 0.9.22.
This allows getting rid of a lot of library version check #ifdeffery.
Release 0.9.22 is from February 2005, so the requirement is reasonable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32253 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove empty paragraph from TV input chapter.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31977 b3059339-0415-0410-9bf9-f77b7e298cf2
Merge TV input and TV teletext chapter into the usage chapter.
This improves the overall structure of the documentation.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31978 b3059339-0415-0410-9bf9-f77b7e298cf2
Restore mistakenly removed TV input chapter introduction.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31979 b3059339-0415-0410-9bf9-f77b7e298cf2
Merge radio chapter into the usage chapter.
This improves the overall structure of the documentation.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31980 b3059339-0415-0410-9bf9-f77b7e298cf2
This improves the overall structure of the documentation.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31970 b3059339-0415-0410-9bf9-f77b7e298cf2
Merge CD/DVD chapter into the usage chapter for all translations.
This improves the overall structure of the documentation.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31971 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove usage.xml symlink in the Chinese documentation translation.
It will be replaced with the English text in a moment.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31965 b3059339-0415-0410-9bf9-f77b7e298cf2
Add copy of English usage.xml file to Chinese translation.
This will be useful to merge other parts of the Chinese translation into it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31966 b3059339-0415-0410-9bf9-f77b7e298cf2
The package list for Debian systems is not specific to the Sarge release.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31841 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove instructions for installing XML/XSL packages from source.
This information is outside the scope of this README file.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31842 b3059339-0415-0410-9bf9-f77b7e298cf2
Simplify xmllint test.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31836 b3059339-0415-0410-9bf9-f77b7e298cf2
cosmetics: Drop leading underscores from variable names.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31837 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove unused variable fake_docbook_xsl.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31838 b3059339-0415-0410-9bf9-f77b7e298cf2
Adding XML entities for the English XML files to main.xml is enough.
The English version is the master and will always be complete.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31839 b3059339-0415-0410-9bf9-f77b7e298cf2
cosmetics: Use more compact "if .. then" shell syntax.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31840 b3059339-0415-0410-9bf9-f77b7e298cf2
Simplify adding --catalogs option to xsltproc/xmllint command line.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31843 b3059339-0415-0410-9bf9-f77b7e298cf2
Add an XML catalog search path that works for current macports systems.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31844 b3059339-0415-0410-9bf9-f77b7e298cf2
whitespace cosmetics: fix indentation
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31845 b3059339-0415-0410-9bf9-f77b7e298cf2
Skip searching for an xmllint command.
The xmllint target is separate from building the documentation; thus if xmllint
is not available, the xmllint targets can fail without further harm.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31846 b3059339-0415-0410-9bf9-f77b7e298cf2
Almost all files are v2+, but there are some bits of v2 only code
left, so MPlayer as a whole is still v2 only.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31835 b3059339-0415-0410-9bf9-f77b7e298cf2
Drop one pointless subsectioning level from radio input chapter.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31815 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove subsection that describes how to tweak CD/DVD drives.
It is getting outdated and outside the scope of MPlayer documentation.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31816 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove pointless and non-informative SDL section from video output chapter.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31817 b3059339-0415-0410-9bf9-f77b7e298cf2
Drop one level of pointless subsectioning.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31818 b3059339-0415-0410-9bf9-f77b7e298cf2
Split TV chapter in two.
This avoids a chapter without content apart from the (sub)sections.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31819 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove MTRR section from video output chapter.
The information it contains should be irrelevant in 2010.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31820 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove graphics cards subsections from Xv section in video output chapter.
The information contained is very outdated.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31821 b3059339-0415-0410-9bf9-f77b7e298cf2
Patch by Paul Huwe [reicow yahoo com] with some modifications by me.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31794 b3059339-0415-0410-9bf9-f77b7e298cf2
Printing maximum volume only works when prefering float format.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31762 b3059339-0415-0410-9bf9-f77b7e298cf2
Add output device selection and correctly set the default device if
it's selected.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31715 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix cosmetics after r31715.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31716 b3059339-0415-0410-9bf9-f77b7e298cf2
Independent tests indicate that GLX_STEREO is working fine on
supported hardware.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31647 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31648 b3059339-0415-0410-9bf9-f77b7e298cf2
Support for unencrypted Blu-ray playback through libbluray.
Use it through: mplayer br:////path/to/disc
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31631 b3059339-0415-0410-9bf9-f77b7e298cf2
The Makefile should now be simple enough to understand without it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31583 b3059339-0415-0410-9bf9-f77b7e298cf2
Make clear that -frames 0 surpresses all _video_ output and not the
text output.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31552 b3059339-0415-0410-9bf9-f77b7e298cf2
Drop configure support for Jade/OpenJade XSLT processors.
Support is not functional nor is it clear it ever worked at all.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31535 b3059339-0415-0410-9bf9-f77b7e298cf2
Drop support for the Saxon XSLT processor.
The XSLT processor detection needs to be overhauled and simplified. Since
nobody appears to be using Saxon it is just a burden that hinders the
simplification. It can be added back cleanly if there is popular request.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31536 b3059339-0415-0410-9bf9-f77b7e298cf2
Its functionality has been superseeded by sws by quite some time, and
the "swap" functionality is now provided by vf_format.
see http://comments.gmane.org/gmane.comp.video.mplayer.devel/55804 for
a full discussion.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31350 b3059339-0415-0410-9bf9-f77b7e298cf2
Patch by Malte Särner, malte D sarner A multiq se
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31347 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix compilation with nemesi and live555.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31348 b3059339-0415-0410-9bf9-f77b7e298cf2
be able to handle this just as well (or better) including interlaced.
If not, this needs to be fixed there instead of duplicating code.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31320 b3059339-0415-0410-9bf9-f77b7e298cf2
-a52drc range extension was already done earlier (and the svn commit
is buggy for ad_liba52). However keep the man page change (this is the
only part not skipped).
We don't want to use lavf for Matroska demuxing; it's questionable
whether that's a good idea even in svn, and the internal demuxer here
is definitely a better choice.
Change 'struct vf_instance' pointer arguments to more standard style
as in the subject. Also some other minor formatting fixes.
Patch by Diego Biurrun.
The previous version could possibly be misread in a way that forbids
reindenting if-blocks. The intended meaning, that whitespace changes
should be separated from other changes, is already implied from what
is written above that paragraph.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31200 b3059339-0415-0410-9bf9-f77b7e298cf2
Make the number of output surfaces allocated by vo_vdpau configurable
and allow queuing multiple future frames with the VDPAU frame timing
functionality. There are two known issues that could be polished in
the future for particularly long queue time cases. First, toplevel
code should possibly wait for the queued changes to finish displaying
in some situations like switching files. Second, the VO can block
waiting for a surface to become available, and in the worst case this
wait can be almost as long as the maximum queuing time (potentially
causing audio underruns). However those issues are not high priority.
Add -vo vdpau suboption "studio" to produce output in RGB range
16-235. Man page description mostly taken from a patch by Lauri
Mylläri (but not code). Also slightly tweak the description of two
other suboptions on the man page.
xmllint is just a convenient way to check for syntax errors;
it is not a requirement to build the documentation.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31164 b3059339-0415-0410-9bf9-f77b7e298cf2
Since the xmllint-* targets are phony, they should never be a dependency
of real targets, so make them a dependency of the phony html-chunked-* /
html-single-* targets instead. This is just as correct, but now the docs are
regenerated when dependencies change and not with every make invocation.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31163 b3059339-0415-0410-9bf9-f77b7e298cf2
This greatly simplifies the documentation build process and the Makefiles.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31160 b3059339-0415-0410-9bf9-f77b7e298cf2
Nowadays FFmpeg is faster than liba52 and external liba52 is well supported.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31147 b3059339-0415-0410-9bf9-f77b7e298cf2
This simplifies the build system and should have no practical disadvantage.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31133 b3059339-0415-0410-9bf9-f77b7e298cf2
this may (and has) confused people, beside
that 99.9% of all MUA will do the right thing
here anyways.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30986 b3059339-0415-0410-9bf9-f77b7e298cf2
If --enable-translation was specified to configure, build and install
.mo files for the selected message language(s). The languages enabled
can be chosen with the --language-msg option; by default all available
ones will be installed. The .po source files for available languages
are seached under the po/ subdirectory; at the moment that
subdirectory is not included in the sources so no languages will be
enabled unless you add the actual translations before running
configure.
The .mo files are created in the locale/ subdirectory when compiling.
By default MPlayer will only look for them in the installed location,
so the newly compiled .mo files will not be found if you run MPlayer
without installing. You can set the MPLAYER_LOCALEDIR environment
variable to point to the locale/ directory to test the translations
without installing.
It is now possible to specify alternative codec paths on the comand line.
Furthermore, XANIM_MOD_DIR was never properly documented.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30936 b3059339-0415-0410-9bf9-f77b7e298cf2
It allows to search binary codecs in non-standard directories.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30897 b3059339-0415-0410-9bf9-f77b7e298cf2
Note that r30455 is wrong, that commit does not in fact change the
default behavior as claimed in the commit message. It only breaks
"-af-adv force=0", which was already pretty much useless though.
Enable ASS/SSA rendering through libass in mencoder. This duplicates a
bit of code (to parse font attachments, for example). Additionally, add
a filter "fixpts" that generates PTS, simulating fixed fps. PTS
generated by this filter are then used for subtitle timing.
Original patch by Nicolas George. (nicolas.george normalesup.org)
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30849 b3059339-0415-0410-9bf9-f77b7e298cf2
screen borders with -geometry.
Based on patch by Melchior FRANZ [melchior franz gmail com].
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30822 b3059339-0415-0410-9bf9-f77b7e298cf2
Add -vo vdpau suboptions "queuetime_windowed" and "queuetime_fs" to
specify the maximum number of milliseconds how far into the future a
frame flip can be queued using the VDPAU presentation queue
functionality. The intended main use of these options is to allow
disabling use of the queuing feature on systems where using it causes
choppiness in other graphics behavior (this is an NVIDIA driver issue;
the video itself isn't affected).
libass doesn't support fontconfig < 2.4.2 so fallbacks for these
ancient versions aren't needed anymore. Also update the man page
(English, German) to reflect the change. Additionally note that
-embeddedfonts controls the use of ASS script embedded fonts too.
-embeddedfonts is now always enabled by default. Fonts are never
extracted into a directory anymore but passed to libass via memory.
