Make all AOs use what has been introduced in the previous commit.
Note that even AOs which can handle all possible layouts (like ao_null)
use the new functions. This might be important if in the future
ao_select_champ() possibly honors global user options about downmixing
and so on.
The point is selecting a minimal fallback. The AOs will call this
through the AO API, so it will be possible to add options affecting
the general channel layout selection.
It provides the following mechanism to AOs:
- forcing the correct channel order
- downmixing to stereo if no layout is available
- allow 5.1 <-> 5.1(side) fallback
- handling "unknown" channel layouts
This is quite weak and lots of code/complexity for little gain. All AOs
already made sure the channel order was correct, and the fallback is of
little value, and could perhaps be done in the frontend instead, like
stereo downmixing with --channels=2 is handled. But I'm not really sure
how this stuff should _really_ work, and the new code will hopefully
provides enough flexibility to make radical changes to channel layout
negotiation easier.
Now mpv's channel map is used to map each channel to a speaker. This
allows in theory for playback of any layout for which ao_openal
actually has a speaker defined. Also add the back-center (BC) speaker,
which allows playback of 6.0 audio. Enabling more layouts by adding
other speakers would be possible, but I'm not sure about the speaker
positions.
This allows supporting 5 channel audio (which can be eother 5.0 or 4.1).
Fallback doesn't work yet. It will do nonsense if the channel layout
doesn't match perfectly, even though it's similar.
Add a CHECK_ALSA_ERROR macro to report ALSA errors. This is similar to
what vo_vdpau does. This removes lots of boiler plate, it almost gives
me the feeling the ao_alsa initialization code is now readable. This
change is squashed with the reformatting, because both changes are
just as noisy and useless.
Like most other AOs, ao_pulse set the channel count only, always using a
default layout. Try to set the exact layout.
For this, we need a big lookup table to map waveex/lavc/mpv speaker
position to PulseAudio's, since PA_CHANNEL_POSITION_ is apparently not
compatible to waveext, and I haven't seen any API functions that would
help mapping them.
Completely untested. (Let's leave that to someone else...)
This actually breaks audio for 5/6/8 channels. There's no reordering
done yet. The actual reordering will be done inside of af_lavrresample
and has to be made part of the format negotiation.
mp_audio has some redundant fields. Setters like mp_audio_set_format()
initialize these properly.
Also move the mp_audio struct to a the file audio.c.
We can remove a mysterious line of code from af.c:
in.format |= af_bits2fmt(in.bps * 8);
I'm not sure if this was ever actually needed, or if it was some kind of
"make it work" quick-fix that works against the way things were supposed
to work. All filters etc. now set the format correctly, so if there ever
was a need for this code, it's definitely gone.
Schedule mpv's playloop as a high frequency timer inside the main Cocoa event
loop. This has the benefit to allow accessing menus as well as resizing the
window without the playback being blocked and allows to remove countless hacks
from the code that involved manually pumping the event loop as well simulating
manually some of the Cocoa default behaviours.
A huge improvement consists in removing NSApplicationLoad. This is a C function
defined in the Cocoa header and implements a minimal OSX application under ther
hood so that you can use the Cocoa GUI toolkit from C/C++ without having to
respect the Cocoa standards in terms of application initialization. This was
bad because the behaviour implemented by NSApplicationLoad was hard to customize
and had several gotchas especially in the menu department.
mpv was changed to be just a nib-less application. All the Cocoa part is still
generated in code but the event handling is now not dissimilar to what is
present in a stock Mac application.
As a part of reviewing the initialization process, I also removed all of
`osdep/macosx_finder_args`. The useful parts of the code were moved to
`osdep/macosx_appication` which has the broaded responsibility of managing the
full lifecycle of the Cocoa application. By consequence the
`--enable-macosx-finder` configure switch was killed as well, as this feature
is always enabled.
Another change the users will notice is that when using a bundle the `--quiet`
option will be inserted much earlier in the initializaion process. This results
in mpv not spamming mpv.log anymore with all the initialization outputs.
Switch the internal channel order to libavcodec's. If the channel number
mismatches at some point, use libavresample for up- or downmixing.
Remove the old af_pan automatic downmixing.
The libavcodec channel order should be equivalent to WAVEFORMATEX order,
at least nowadays. reorder_ch.h assumes that WAVEFORMATEX and libavcodec
might be different, but all defined channels have the same mappings.
Remove the downmixing with af_pan as well as the channel conversion with
af_channels from af.c, and prefer af_lavrresample for this. The
automatic downmixing behavior should be the same as before (if the
--channels option is set to 2, which is the default, the audio output
is forced to 2 channels, and libavresample does all downmixing).
Note that mpv still can't do channel layouts. It will pick the default
channel layout according to the channel count. This will be fixed later
by passing down the channel layout as well.
af_hrtf depends on the order of the input channels, so reorder to ALSA
(for which this code was written). This is better than changing the
filter code, which is more risky.
ao_pulse can accept waveext order directly, so set that as channel
mapping.
Use codec names instead of FourCCs to identify codecs. Rewrite how
codecs are selected and initialized. Now each decoder exports a list
of decoders (and the codec it supports) via add_decoders(). The order
matters, and the first decoder for a given decoder is preferred over
the other decoders. E.g. all ad_mpg123 decoders are preferred over
ad_lavc, because it comes first in the mpcodecs_ad_drivers array.
Likewise, decoders within ad_lavc that are enumerated first by
libavcodec (using av_codec_next()) are preferred. (This is actually
critical to select h264 software decoding by default instead of vdpau.
libavcodec and ffmpeg/avconv use the same method to select decoders by
default, so we hope this is sane.)
The codec names follow libavcodec's codec names as defined by
AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders
have names different from the canonical codec name. The AVCodecDescriptor
API is relatively new, so we need a compatibility layer for older
libavcodec versions for codec names that are referenced internally,
and which are different from the decoder name. (Add a configure check
for that, because checking versions is getting way too messy.)
demux/codec_tags.c is generated from the former codecs.conf (minus
"special" decoders like vdpau, and excluding the mappings that are the
same as the mappings libavformat's exported RIFF tables). It contains
all the mappings from FourCCs to codec name. This is needed for
demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the
codec as determined by libavformat, while the other demuxers have to do
this on their own, using the mp_set_audio/video_codec_from_tag()
functions. Note that the sh_audio/video->format members don't uniquely
identify the codec anymore, and sh->codec takes over this role.
Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which
provide cover the functionality of the removed switched.
Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure
container/video combinations (e.g. the sample Film_200_zygo_pro.mov)
are played flipped. ffplay/avplay doesn't handle this properly either,
so we don't care and blame ffmeg/libav instead.
mpv -ao help and mpv -vo help shouldn't show the encoding outputs (named
"lavc" on both cases). Also make it impossible to select these manually
when not encoding.
On Linux, ao_portaudio has weird freezing issues (possibly specific to
the ALSA backend, though). Also ao_dsound is more likely to get multi-
channel audio output right, and ao_portaudio probably mangles these.
This partially reverts earlier decisions, when I thought it would
always be better to prefer the audio volume filter over the AO's,
because the AO's relies on the underlying audio-API, which could
be broken or exhibit unusual behavior (like it happened with ao_dsound).
However, since the audio buffer can be quite large (500 ms), and we
don't attempt to flush & refilter the audio on volume changes, always
prefer AO volume control (as long as the AO mixer doesn't control the
system mixer).
Also document what the mixer.c related AO fields mean (hopefully not
too brief).
Handle all pending events and exit instead of waiting. When there are lots of
input events (for example, scrolling with trackpad), timeout can add up
to make a huge frame delay. In my tests, if I scroll fast enough, that loop
would never exit.
This causes trouble when a hw device is used:
pcm_hw.c:514:(snd_pcm_hw_delay) SNDRV_PCM_IOCTL_DELAY failed (-77): File descriptor in bad state
when running mpv test.mkv --ao=alsa:device=iec958,alsa and pausing
during playback.
Historically, mplayer usually did not call snd_pcm_delay() (which is
called by get_delay()) while paused, so this problem never showed up.
But at least mpv has changes that cause get_delay() to be called when
updating the status line (see commit 3f949cf).
It's possible that calling snd_pcm_delay() is not always legal when the
audio is paused, and at least fails with the error message mentioned
above is the device is a hardware device. Change get_delay() to return
the last delay before the audio was paused. The intention is to get a
continuous playback status display, even when pausing or frame stepping,
otherwise we could just return the audio buffer fill status in
get_delay() or even just 0 when paused.
This mainly serves as a fallback for platforms where nothing better is
available; also as a debugging help. Both the audio and video driver are
not first class - the audio driver lacks delay detection, and the video
driver only supports a single YUV color space.
Configure options: --disable-sdl2 to disable SDL 2.0+ detection,
--disable-sdl to disable SDL 1.2+ detection. Both options need to be
specified to turn off SDL support entirely.
Do not fall back to 0 for samplerate when parser is not initialized.
Might fix some issues with using -ac spdifenc with audio in MKV
or MP4.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35517 b3059339-0415-0410-9bf9-f77b7e298cf2
Replace outdated list of unsupported formats by list of supported formats.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35534 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not call af_fmt2str on the same data over and over.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35535 b3059339-0415-0410-9bf9-f77b7e298cf2
ad_spdif: use the more specific AF_FORMAT_AC3_LE when
we handle AC3.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35536 b3059339-0415-0410-9bf9-f77b7e298cf2
Make AF_FORMAT_IS_IEC61937 include AF_FORMAT_IS_AC3.
Our AC3 "sample format" is also iec61937.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35537 b3059339-0415-0410-9bf9-f77b7e298cf2
af_format: support endianness conversion also for iec61937
formats in general, not just AC3.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35538 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
audio/filter/af_format.c
af_format: Fix check_format, non-special formats are of course supported.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35545 b3059339-0415-0410-9bf9-f77b7e298cf2
Note: see mplayer bug #2110
The option is -no-video. Remove the deprecated "fast" suboption, which
did nothing and instructed the user to use "-novideo" instead.
Fix a reference to -novideo in encoding.rst.
Add a "generic" entry about -no-* to the list of renamed options. The
change is already explicitly mentioned in the text above the table, but
even if it's redundant, it makes it harder to overlook.
This fixes operation with current ffmpeg releases.
Note that this planarization is slow and should be reverted once proper
planar audio support is there in mpv.
PulseAudio allows applications to set volume over 100%. To make this
possible, the PulseAudio daemon raises the global system volume, and
tries to lower other applications volumes. Unfortunately, this doesn't
work out and doesn't manage to keep the effective volume level of these
other applications.
To make it short: this functionality invoked PulseAudio bugs. Disable
it.
This essentially reverts commit 85a64b.
Most of these are reimar fixing issues found by Coverity static
analyzer, and possibly some more cleanup commits independent from
this.
Since these commits are rather noisy, squash them all together.
Try to make code a bit clearer.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35294 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
audio/out/ao_alsa.c
Check the correct variable for NULL.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35323 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove pointless unreachable code (the loop condition already checks
the 0xff case).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35325 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix typo that might have caused reading beyond the string end.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35326 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not needlessly use "long" types.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35331 b3059339-0415-0410-9bf9-f77b7e298cf2
Use AV_RB32 to avoid sign extension issues and validate offset before using it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35332 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove nonsense casts.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35343 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix crash in case sh_audio allocation failed.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35348 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix potential NULL dereference.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35351 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
libmpcodecs/ad_ffmpeg.c
Note: Slightly modified.
Fix malloc failure check to check the correct variable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35353 b3059339-0415-0410-9bf9-f77b7e298cf2
Avoid code duplication and pointless casts.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35363 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/tv.c
Error out if an invalid channel list name was specified
instead of continuing and reading outside array bounds
all over the place.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35364 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/tv.c
Make array "static const".
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35365 b3059339-0415-0410-9bf9-f77b7e298cf2
Properly free resources even when encountering many
parse errors.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35367 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
parser-cfg.c
Avoid leaks in error handling.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35380 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not do sign comparisons on "char" type which can be both signed or unsigned.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35381 b3059339-0415-0410-9bf9-f77b7e298cf2
Free cookies file data after parsing it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35382 b3059339-0415-0410-9bf9-f77b7e298cf2
http_set_field only makes a copy of the string, so we still need to
free it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35383 b3059339-0415-0410-9bf9-f77b7e298cf2
check4proxies does not modify input URL, so mark it const.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35390 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove proxy "support" from stream_rtp and stream_upd, trying
to use a http proxy for UDP connections makes no sense.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35394 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/stream_rtp.c
stream/stream_udp.c
Add url_new_with_proxy function to reduce code duplication and memleaks.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35395 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/pnm.c
stream/stream_live555.c
stream/stream_nemesi.c
stream/stream_rtsp.c
Fix off-by-one errors in file descriptor validity checks.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35402 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove pointless cast.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35403 b3059339-0415-0410-9bf9-f77b7e298cf2
Abort when opening the file failed instead of calling
"write" with an invalid descriptor.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35404 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove pointless local variable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35411 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/http.c
Libav 0.8.4 is ridiculously old (in relative terms), so I don't know
how many things are broken silently.
Encoding is disabled, because the required API hasn't been added yet.
(On the other hand, the old API can't be used in newer versions.)
This should improve compatibility with ffmpeg 0.11.2 as well, which
didn't define AV_CODEC_ID_SUBRIP yet.
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
Tis drops the silly lib prefixes, and attempts to organize the tree in
a more logical way. Make the top-level directory less cluttered as
well.
Renames the following directories:
libaf -> audio/filter
libao2 -> audio/out
libvo -> video/out
libmpdemux -> demux
Split libmpcodecs:
vf* -> video/filter
vd*, dec_video.* -> video/decode
mp_image*, img_format*, ... -> video/
ad*, dec_audio.* -> audio/decode
libaf/format.* is moved to audio/ - this is similar to how mp_image.*
is located in video/.
Move most top-level .c/.h files to core. (talloc.c/.h is left on top-
level, because it's external.) Park some of the more annoying files
in compat/. Some of these are relicts from the time mplayer used
ffmpeg internals.
sub/ is not split, because it's too much of a mess (subtitle code is
mixed with OSD display and rendering).
Maybe the organization of core is not ideal: it mixes playback core
(like mplayer.c) and utility helpers (like bstr.c/h). Should the need
arise, the playback core will be moved somewhere else, while core
contains all helper and common code.
