The configure followed 5 different convetions of defines because the next guy
always wanted to introduce a new better way to uniform it[1]. For an
hypothetic feature 'hurr' you could have had:
* #define HAVE_HURR 1 / #undef HAVE_DURR
* #define HAVE_HURR / #undef HAVE_DURR
* #define CONFIG_HURR 1 / #undef CONFIG_DURR
* #define HAVE_HURR 1 / #define HAVE_DURR 0
* #define CONFIG_HURR 1 / #define CONFIG_DURR 0
All is now uniform and uses:
* #define HAVE_HURR 1
* #define HAVE_DURR 0
We like definining to 0 as opposed to `undef` bcause it can help spot typos
and is very helpful when doing big reorganizations in the code.
[1]: http://xkcd.com/927/ related
The code was selecting PA_CHANNEL_POSITION_MONO for MP_SPEAKER_ID_FC,
which is correct only with the "mono" channel layout, but not anything
else. Remove the mono entry, and handle mono separately.
See github issue #326.
It's true that ALSA uses alloca() in some of its API functions, but
since this is hidden behind macros in the ALSA headers, we have no
reason to include alloca.h ourselves.
Might help with portability (FreeBSD).
At least not with ffmpeg.
Honestly, I have no idea how little endian AC3 works at all, since
ao_pcm doesn't do anything special about it, and treats it like s16le.
Maybe it's broken and ffmpeg has special logic to detect it.
Was disabled by default, was never used, internal support was
inconsistent and poor, and there has been virtually no interest in
creating translations.
And I don't even think that a terminal program should be translated.
This is something for (hypothetical) GUIs.
Output silence to the output buffer during underruns. This removes small
occasional glitches that happen before the AUHAL is actually paused from the
`audio_pause` call.
Fixes#269
Trying to connect multiple mpv clients to JACK with the
JackUseExactName option would fail unless the user manually
specifies a unique client name. This changes the behavior
to automatically generate a unique name if the requested
one is already in use.
Use the new MP_ macros for some AOs instead of mp_msg.
Not all AOs are converted, and some only partially. In some cases, some
additional cosmetic changes are made.
Using the default output audio unit should provide a much better user
exeperience since it changes automatically the output device based on which
becomes the default one.
This was removed in d427b4fd. I now found a sample that causes underruns when
moving to a chapter and apparently this is also a problem when taking
screenshots.
Reverts one of the changes from 18777ecf. `kAudioObjectPropertyScopeOutput`
was introduced in the 10.8 SDK while `kAudioDevicePropertyScopeOutput` was
moved to `AudioHardwareDeprecated.h`. Since the deprecation is silent for now
(no warnings), just use the old constant.
Either way, they both evaluate to 'outp', and in the 10.8 SDK the deprecated
constant is defined in terms of the non-deprecated one.
Fixes#155
This is not done automatically by CoreAudio. I am told that it would a PITA
to have to switch back the format manually on the device (especially if the
same device is used for lpcm output).
b2f9e0610 introduced this functionality with code that was quite 'monolithic'.
Split the functionality over several functions and ose the new macros to get
array properties.
Introduce some macros to deal with properties. These allow to work around the
limitation of CoreAudio's API being `void **` based. The macros allow to keep
their client's code DRY, by not asking size and other details which can be
derived by the macro itself. I have no idea why Apple didn't design their API
like this in the first place.
* ao_coreaudio_utils: contains several utility function
* ao_coreaudio_properties: contains functions to set and get audio object
properties.
Conflicts:
audio/out/ao_coreaudio.c
The condition was checked wrongly on asbd which is the input format
description. This lead to the condition always being true, thus selecting lpcm
streams for digital input.
The initialization is split more clearly between compressed and lpcm case.
For the compressed case, format selection is simplified a lot and negotiation
removed. The way it was written it just passed back to the core the original
requested format, not what was found available on hardware.
Since this is most likely useless for the compressed case, I didn't bother
with this. In the future I'd like to split this AO in two one that only uses
the AUHAL and the other with direct access to the hardware so that even
passthrough of lcpm can be possible. This would decrease the latency,
audiophiles would like that.
Split out some utility functions that use the CoreAudio API but are not related
the main task of the AOs (which is to move data correctly to the ringbuffer).
These are mainly need for the verbosity of the CoreAudio API and are just
obscuring the 'real' code.
Read only the requested amount by the AUHAL (instead of all the buffered data).
No idea what the deal is with pausing the audio units if there is no audio to
play, maybe to avoid underruns of some sort. Anyway from my tests this
condition never occurred so I'm removing it all.
MSDN tells me to multiply the samplerates by 4 (for setting up the S/PDIF
signal frequency), but doesn't mention that I'm only supposed to do it
on the new, NT6.1+ IEC 61937 structs. Works on my Realtek Digital Output,
but as I can't connect any hardware to it I can't hear the result.
Also, always ask for little-endian AC3. I'm not sure if this is supposed
to be LE or NE, but Windows is LE on all platforms, so we go with LE.
Entirely untested as this troper has no S/PDIF hardware.
Refuses trying any other format if we can't use passthrough, or we would
end up sending white noise at the user.
Do an strstr match against the device description and, if we have only
a single match, take it. This works as long as the devices in the system
don't change, but it's not supposed to be reliable; if one wants
reliability, one uses the device ID string.
Formatting.
This could turn valid parameters into syntax errors by the mere presence
or abscence of a device (e.g. USB audio devices), so don't do that.
We do validate that, if the parameter is an integer, it is not negative.
We also respond to the "help" parameter, which does the same as the "list"
suboption but exits after listing.
Demote the validation logging to MSGL_DBG2.
Validates by trying to pick the device using the device enumerator and
aborting with out of range on failure.
Refactors find_and_load_device to not use the wasapi_state; it might be
called during validation. Adds missing CoInitialize/CoUninitialize calls.
Remove unused variables (the SAFE_RELEASE macros keep them referenced so
compiler warnings don't help finding them...).
Remove the IMMDeviceEnumerator from the wasapi_state, it's only needed
during initialization and initialization is now well factored enough to
get rid of it.
Try and connect to unplugged devices as well when using the device ID
string.
Omit "{0.0.0.00000000}." on devices that start with that substring,
re-add when searching for devices by ID.
Log the device ID of the default device.
Log the friendly name of the used device.
Consistently refer to endpoints/devices as devices, as this is more
consistent with mpv terminology.
Uses WASAPI in shared mode by default, add :exclusive flag to choose
exclusive mode (duh). WASAPI works somewhat different in shared mode:
the OS suggests the sample format to use, and the GetBuffer call is
done slightly differently.
The shared mode driver does not consume audio as fast as it notifies
the thread; we need to check how much we're allowed to write. Not doing
this correctly results in spamming the console with
AUDCLNT_E_BUFFER_TOO_LARGE errors.
When guessing formats for exclusive mode, try several sample size and
sample rate combinations instead of just falling back to s16le@44100hz.
If none of the rates are accepted, tries remixing >6 channels to 5.1
channels. Failing that, tries remixing to stereo. Failing everything,
including the CD Red Book format, what else is left to test?
Calculate buffer_block_size based on the configured channels and bytes
per sample; MSDN docs say nBlockAlign is not guaranteed to be set for
anything but integer PCM formats.
Adds the :list suboption to ao_wasapi0, which enumerates the audio endpoints
in the system.
Adds the :device=<n> suboption, which either takes an ID string (as output by
list) or a device number and uses the requested device instead of the system
default.
These two options were supported by ALSA and OSS only. Further, their
values were specific to the respective audio systems, so it doesn't make
sense to keep them as top-level options.
This changes how device names are handled. Before this commit, device
names were mangled in strange ways to avoid clashing with the option
parser syntax. "." was replaced with ",", and "=" with ":" (the user had
to do the inverse to get the correct device name).
The "new" option parser has multiple ways to escape option strings, so
we don't need this confusing hack anymore.
Add an explicit note to the manpage as well.
Seeking calls thread_reset, but doesn't call thread_play. thread_reset
would disable WASAPI events, but they would never get re-enabled unless
the user paused and then unpaused.
Keep track of whether the stream is paused or not (there already was a
field for that, but it was apparently unused), and if it's not paused,
call thread_play after thread_reset. Fixes mpv freezing after seeks.
Fixes format specifies that assume windows TYPEDEFS are as long as they look
like they are.
Remove calls to _beginthreadex and _endthreadex, these are only present on
microsoft's C runtimes. Replace by the otherwise identical CreateThread and
ExitThread calls.
This actually requires fixes to devicetopology.h, but the problem has been
(kinda) reported to mingw-w64:
<Kovensky> I see that those KSJACK* structs are supposedly declared in
devicetopology.h itself, but for some reason (some of?) the decls that use
them aren't seeing them?
<Kovensky> ok, it seems that it expects ks.h and ksmedia.h to declare those
structs, but it doesn't
<Kovensky> the included files declare KDATAFORMAT, KSIDENTIFIER and LUID (and
the associated pointer typedefs)
<Kovensky> but everything else is essentially inside #if 0
<Kovensky> changing the #ifndef _KS_ to only include KDATAFORMAT, KSIDENTIFIER
and LUID (and putting the KSJACK stuff outside that #ifndef) makes the
header compile
<Kovensky> it solves my immediate problem, but if that happened to begin with
there's probably something more wrong with the ks headers :S
The core didn't use these fields, and use of them was inconsistent
accross AOs. Some didn't use them at all. Some only set them; the values
were completely unused by the core. Some made full use of them.
Remove these fields. In places where they are still needed, make them
private AO state.
Remove the --abs option. It set the buffer size for ao_oss and ao_dsound
(being ignored by all other AOs), and was already marked as obsolete. If
it turns out that it's still needed for ao_oss or ao_dsound, their
default buffer sizes could be adjusted, and if even that doesn't help,
AO suboptions could be added in these cases.
Some still do, because they use the value in other places of the init
function. ao_portaudio is tricky and reads ao->bps in the stream
thread, which might be started on initialization (not sure about that,
but better safe than sorry).
Currently every single AO was implementing it's own ringbuffer, many times
with slightly different semantics. This is an attempt to fix the problem.
I stole some good ideas from ao_portaudio's ringbuffer and went from there.
The main difference is this one stores wpos and rpos which are absolute
positions in an "infinite" buffer. To find the actual position for writing /
reading just apply modulo size.
The producer only modifies wpos while the consumer only modifies rpos. This
makes it pretty easy to reason about and make the operations thread safe by
using barriers (thread safety is guaranteed only in the Single-Producer/Single-
Consumer case).
Also adapted ao_coreaudio to use this ringbuffer.
This is hopefully the start of something good. ca_ringbuffer_read and
ca_ringbuffer_write can probably cleaned up from all the NULL checks once
ao_coreaudio.c gets simplyfied.
Conflicts:
audio/out/ao_coreaudio.c
This was overlooked with commit 32a898f, because OSS4 volume control is
typically not available on Linux. BSD does have this feature, so the
broken code broke compilation there.
Fixes crashes when playing with certain numbers of channels. The core
assumes AOs accept data aligned on channels * samplesize, and ao_jack's
play() function broke that assumption:
mpv: core/mplayer.c:2348: fill_audio_out_buffers: Assertion `played % unitsize == 0' failed.
Fix by aligning the buffer and chunk sizes as needed.
GetTimer() is generally replaced with mp_time_us(). Both calls return
microseconds, but the latter uses int64_t, us defined to never wrap,
and never returns 0 or negative values.
GetTimerMS() has no direct replacement. Instead the other functions are
used.
For some code, switch to mp_time_sec(), which returns the time as double
float value in seconds. The returned time is offset to program start
time, so there is enough precision left to deliver microsecond
resolution for at least 100 years. Unless it's casted to a float
(or the CPU reduces precision), which is why we still use mp_time_us()
out of paranoia in places where precision is clearly needed.
Always switch to the correct time. The whole point of the new timer
calls is that they don't wrap, and storing microseconds in unsigned int
variables would negate this.
In some cases, remove wrap-around handling for time values.
The ALSA device was not closed when initialization failed.
The ALSA error handler (set with snd_lib_error_set_handler()) was not
unset when closing ao_alsa. If this is not done, the handler will still
be called when other libraries using ALSA cause errors, even though
ao_alsa was long closed. Since these messages were prefixed with
"[AO_ALSA]", they were misleading and implying ao_alsa was still used.
For some reason, our error handler is still called even after doing
snd_lib_error_set_handler(NULL), which should be impossible. Checking
with the debuggers, inserting printf(), as well as the alsa-lib source
code all suggest our error handler should not be called, but it still
happens. It's a complete mystery.
It turns out that ALSA's 4 channel layout is different from mpv's and
ffmpeg's 4.0 layout. Thus trying to do 4 channel output led to incorrect
remixing via lib{av,sw}resample.
Fix the default layouts for the internal filter chain as well, although
I'm not sure if it matters at all.
The snd_pcm_hw_params_test_format() call actually crashes in alsa-lib if
called with SND_PCM_FORMAT_UNKNOWN, so the already existing fallback
code won't work in this case.
