11 KiB
date | title | slug | url |
---|---|---|---|
2019-10-26T11:04:03+01:00 | rclone serve ftp | rclone_serve_ftp | /commands/rclone_serve_ftp/ |
rclone serve ftp
Serve remote:path over FTP.
Synopsis
rclone serve ftp implements a basic ftp server to serve the remote over FTP protocol. This can be viewed with a ftp client or you can make a remote of type ftp to read and write it.
Server options
Use --addr to specify which IP address and port the server should listen on, eg --addr 1.2.3.4:8000 or --addr :8080 to listen to all IPs. By default it only listens on localhost. You can use port :0 to let the OS choose an available port.
If you set --addr to listen on a public or LAN accessible IP address then using Authentication is advised - see the next section for info.
Authentication
By default this will serve files without needing a login.
You can set a single username and password with the --user and --pass flags.
Directory Cache
Using the --dir-cache-time
flag, you can set how long a
directory should be considered up to date and not refreshed from the
backend. Changes made locally in the mount may appear immediately or
invalidate the cache. However, changes done on the remote will only
be picked up once the cache expires.
Alternatively, you can send a SIGHUP
signal to rclone for
it to flush all directory caches, regardless of how old they are.
Assuming only one rclone instance is running, you can reset the cache
like this:
kill -SIGHUP $(pidof rclone)
If you configure rclone with a remote control then you can use rclone rc to flush the whole directory cache:
rclone rc vfs/forget
Or individual files or directories:
rclone rc vfs/forget file=path/to/file dir=path/to/dir
File Buffering
The --buffer-size
flag determines the amount of memory,
that will be used to buffer data in advance.
Each open file descriptor will try to keep the specified amount of data in memory at all times. The buffered data is bound to one file descriptor and won't be shared between multiple open file descriptors of the same file.
This flag is a upper limit for the used memory per file descriptor.
The buffer will only use memory for data that is downloaded but not
not yet read. If the buffer is empty, only a small amount of memory
will be used.
The maximum memory used by rclone for buffering can be up to
--buffer-size * open files
.
File Caching
These flags control the VFS file caching options. The VFS layer is used by rclone mount to make a cloud storage system work more like a normal file system.
You'll need to enable VFS caching if you want, for example, to read and write simultaneously to a file. See below for more details.
Note that the VFS cache works in addition to the cache backend and you may find that you need one or the other or both.
--cache-dir string Directory rclone will use for caching.
--vfs-cache-max-age duration Max age of objects in the cache. (default 1h0m0s)
--vfs-cache-mode string Cache mode off|minimal|writes|full (default "off")
--vfs-cache-poll-interval duration Interval to poll the cache for stale objects. (default 1m0s)
--vfs-cache-max-size int Max total size of objects in the cache. (default off)
If run with -vv
rclone will print the location of the file cache. The
files are stored in the user cache file area which is OS dependent but
can be controlled with --cache-dir
or setting the appropriate
environment variable.
The cache has 4 different modes selected by --vfs-cache-mode
.
The higher the cache mode the more compatible rclone becomes at the
cost of using disk space.
Note that files are written back to the remote only when they are closed so if rclone is quit or dies with open files then these won't get written back to the remote. However they will still be in the on disk cache.
If using --vfs-cache-max-size note that the cache may exceed this size for two reasons. Firstly because it is only checked every --vfs-cache-poll-interval. Secondly because open files cannot be evicted from the cache.
--vfs-cache-mode off
In this mode the cache will read directly from the remote and write directly to the remote without caching anything on disk.
This will mean some operations are not possible
- Files can't be opened for both read AND write
- Files opened for write can't be seeked
- Existing files opened for write must have O_TRUNC set
- Files open for read with O_TRUNC will be opened write only
- Files open for write only will behave as if O_TRUNC was supplied
- Open modes O_APPEND, O_TRUNC are ignored
- If an upload fails it can't be retried
--vfs-cache-mode minimal
This is very similar to "off" except that files opened for read AND write will be buffered to disks. This means that files opened for write will be a lot more compatible, but uses the minimal disk space.
These operations are not possible
- Files opened for write only can't be seeked
- Existing files opened for write must have O_TRUNC set
- Files opened for write only will ignore O_APPEND, O_TRUNC
- If an upload fails it can't be retried
--vfs-cache-mode writes
In this mode files opened for read only are still read directly from the remote, write only and read/write files are buffered to disk first.
This mode should support all normal file system operations.
If an upload fails it will be retried up to --low-level-retries times.
--vfs-cache-mode full
In this mode all reads and writes are buffered to and from disk. When a file is opened for read it will be downloaded in its entirety first.
This may be appropriate for your needs, or you may prefer to look at the cache backend which does a much more sophisticated job of caching, including caching directory hierarchies and chunks of files.
In this mode, unlike the others, when a file is written to the disk,
it will be kept on the disk after it is written to the remote. It
will be purged on a schedule according to --vfs-cache-max-age
.
This mode should support all normal file system operations.
If an upload or download fails it will be retried up to --low-level-retries times.
Auth Proxy
If you supply the parameter --auth-proxy /path/to/program
then
rclone will use that program to generate backends on the fly which
then are used to authenticate incoming requests. This uses a simple
JSON based protocl with input on STDIN and output on STDOUT.
There is an example program bin/test_proxy.py in the rclone source code.
The program's job is to take a user
and pass
on the input and turn
those into the config for a backend on STDOUT in JSON format. This
config will have any default parameters for the backend added, but it
won't use configuration from environment variables or command line
options - it is the job of the proxy program to make a complete
config.
This config generated must have this extra parameter
_root
- root to use for the backend
And it may have this parameter
_obscure
- comma separated strings for parameters to obscure
For example the program might take this on STDIN
{
"user": "me",
"pass": "mypassword"
}
And return this on STDOUT
{
"type": "sftp",
"_root": "",
"_obscure": "pass",
"user": "me",
"pass": "mypassword",
"host": "sftp.example.com"
}
This would mean that an SFTP backend would be created on the fly for
the user
and pass
returned in the output to the host given. Note
that since _obscure
is set to pass
, rclone will obscure the pass
parameter before creating the backend (which is required for sftp
backends).
The progam can manipulate the supplied user
in any way, for example
to make proxy to many different sftp backends, you could make the
user
be user@example.com
and then set the host
to example.com
in the output and the user to user
. For security you'd probably want
to restrict the host
to a limited list.
Note that an internal cache is keyed on user
so only use that for
configuration, don't use pass
. This also means that if a user's
password is changed the cache will need to expire (which takes 5 mins)
before it takes effect.
This can be used to build general purpose proxies to any kind of backend that rclone supports.
rclone serve ftp remote:path [flags]
Options
--addr string IPaddress:Port or :Port to bind server to. (default "localhost:2121")
--auth-proxy string A program to use to create the backend from the auth.
--dir-cache-time duration Time to cache directory entries for. (default 5m0s)
--dir-perms FileMode Directory permissions (default 0777)
--file-perms FileMode File permissions (default 0666)
--gid uint32 Override the gid field set by the filesystem. (default 1000)
-h, --help help for ftp
--no-checksum Don't compare checksums on up/download.
--no-modtime Don't read/write the modification time (can speed things up).
--no-seek Don't allow seeking in files.
--pass string Password for authentication. (empty value allow every password)
--passive-port string Passive port range to use. (default "30000-32000")
--poll-interval duration Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable. (default 1m0s)
--public-ip string Public IP address to advertise for passive connections.
--read-only Mount read-only.
--uid uint32 Override the uid field set by the filesystem. (default 1000)
--umask int Override the permission bits set by the filesystem. (default 2)
--user string User name for authentication. (default "anonymous")
--vfs-cache-max-age duration Max age of objects in the cache. (default 1h0m0s)
--vfs-cache-max-size SizeSuffix Max total size of objects in the cache. (default off)
--vfs-cache-mode CacheMode Cache mode off|minimal|writes|full (default off)
--vfs-cache-poll-interval duration Interval to poll the cache for stale objects. (default 1m0s)
--vfs-case-insensitive If a file name not found, find a case insensitive match.
--vfs-read-chunk-size SizeSuffix Read the source objects in chunks. (default 128M)
--vfs-read-chunk-size-limit SizeSuffix If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached. 'off' is unlimited. (default off)
See the global flags page for global options not listed here.
SEE ALSO
- rclone serve - Serve a remote over a protocol.