Commit fcf0b80dc9 fixed this the first time. Commit 85576f31a9
"accidentally" removed this code again. The commit message justifying
the removal is correct, except it doesn't take other side-effects of the
state machine into account. I obviously didn't remember what exactly
this was about. So add a comment explaining it this time.
Just apply it again; the thing the latter commit fixed still works.
Fixes: #7819
This affects "pull" AOs only: ao_alsa, ao_pulse, ao_openal, ao_pcm,
ao_lavc. There are changes to the other AOs too, but that's only about
renaming ao_driver.resume to ao_driver.start.
ao_openal is broken because I didn't manage to fix it, so it exits with
an error message. If you want it, why don't _you_ put effort into it? I
see no reason to waste my own precious lifetime over this (I realize the
irony).
ao_alsa loses the poll() mechanism, but it was mostly broken and didn't
really do what it was supposed to. There doesn't seem to be anything in
the ALSA API to watch the playback status without polling (unless you
want to use raw UNIX signals).
No idea if ao_pulse is correct, or whether it's subtly broken now. There
is no documentation, so I can't tell what is correct, without reverse
engineering the whole project. I recommend using ALSA.
This was supposed to be just a simple fix, but somehow it expanded scope
like a train wreck. Very high chance of regressions, but probably only
for the AOs listed above. The rest you can figure out from reading the
diff.
This simply printf()s a concatenation of the provided string and the
relevant escape sequences. No idea what exactly defines this escape
sequence (is it just a xterm thing that is now supported relatively
widely?), and this simply uses information provided on the linked github
issue.
Not much of an advantage over --term-status-msg, though at least this
can have a lower update frequency. Also I may consider setting a default
value, and then it shouldn't conflict with the status message.
Fixes: #1725
Commit 9d32d62b61 broke this when it changed OPT_TIME. I simply forgot
to adjust the command definition. The effect was that "no" was not
accepted as value.
This mode drops or repeats audio data to adapt to video speed, instead
of resampling it or such. It was added to deal with SPDIF. The
implementation was part of fill_audio_out_buffers() - the entire
function is something whose complexity exploded in my face, and which I
want to clean up, and this is hopefully a first step.
Put it in a filter, and mess with the shitty glue code. It's all sort of
roundabout and illogical, but that can be rectified later. The important
part is that it works much like the resample or scaletempo filters.
For PCM audio, this does not work on samples anymore. This makes it much
worse. But for PCM you can use saner mechanisms that sound better. Also,
something about PTS tracking is wrong. But not wasting more time on
this.
Can be useful to force it to adapt to extreme speed changes, while a
higher limit would just use a fraction closer to the original video
speed.
Probably useful for testing only.
Execution of "stop" command in the case when idle mode was not enabled
resulted in player termination scenario not honoring user setting
"save-position-on-quit" from config file. This patch addresses the
issue by checking for "save-position-on-quit" in cmd_stop and saving
state when idle mode is not enabled.
Remove the vaguely defined plane_bits and component_bits fields from
struct mp_imgfmt_desc. Add weird replacements for existing uses. Remove
the bytes[] field, replace uses with bpp[].
Fix some potential alignment issues in existing code. As a compromise,
split mp_image_pixel_ptr() into 2 functions, because I think it's a bad
idea to implicitly round, but for some callers being slightly less
strict is convenient.
This shouldn't really change anything. In fact, it's a 100% useless
change. I'm just cleaning up what I started almost 8 years ago (see
commit 00653a3eb0). With this I've decided to keep mp_imgfmt_desc,
just removing the weird parts, and keeping the saner parts.
The OSC calls this "tooltip" (and although a general mechanism, there's
only one instance using it). One particular problem was that with the
default OSC layout, moving the mouse down and out of the window, the
tooltip stuck around, because the returned mouse position was the last
pixel row in the window, which still overlaps with the seek bar.
Instead of introducing mouse_in_window, you could check last_mouse_X for
nil, but I think this is clearer.
This returns (-1, -1) to the caller if the mouse is outside. Kind of
random, but works.
Before this, we pretty much guaranteed that --mpv-ipc-fd=3 would be
passed. The FD was hardcoded, so scripts started by this mechanism
didn't need to actually parse the argument. Change this to using a
mostly random FD number instead.
I decided to do this because posix_spawnp() and the current replacement
cannot "guarantee" a FD layout. posix_spawn_file_actions_adddup2() just
runs dup2() calls, so it may be hard to set FD 3/4 if they are already
used by something else. For example imagine trying to map:
{.fd = 3, .src_fd = 4},
{.fd = 4, .src_fd = 3},
Then it'd do dup2(4, 3), dup2(3, 4) (reminder: dup2(src, dst)), and the
end result is that FD 4 really maps to the original FD 4.
While this was not a problem in the present code, it's too messy that I
don't want to pretend it can always done this way without an unholy
mess. So my assumption is that FDs 0-2 can be freely assigned because
they're never closed (probably...), while for all other FDs only
pass-through is reasonable.
See manpage additions. This was requested, sort of. Although what has
been requested might be something completely different. So this is
speculative.
This also changes sub_get_text() to return an allocated copy, because
the buffer shit was too damn messy.
Bill Gates did not only create COVID, he's also responsible for the
world's worst OS, where you have to literally jump through hoops of fire
to open files with Unicode file names. Lua did not care to implement any
jumping, so it's our turn to jump.
Untested (on win32).
Fixes: #7701
By default --sub-auto uses "exact". This was far from an "exact" match,
because it added anything that started with the video filename (without
extension), and seemed to end in something that looked like a language
code.
Make this stricter. "exact" still tolerate a language code, but the
video's filename must come before it without any unknown extra
characters. This may not load subtitles in some situations where it
previously did, and where the user might think that the naming
convention is such that it should be considered an exact match.
The subtitle priority sorting seems a bit worthless. I suppose it may
have some value in higher "fuzz" modes (like --sub-auto=fuzzy).
Also remove the mysterious "prio += prio;" line. I probably shouldn't
have checked, but it goes back to commit f16fa9d31 (2003), where someone
wanted to "refine" the priority without changing the rest of the code or
something.
Mostly untested, so have fun.
Fixes: #7702
This brings the displayed percentage closer to the exact number and
allows mpv to more frequently display 100% when it finishes playing a
typical video or audio file.
mp.set_osd_ass() (which was undocumented, or in other words, was not
supposed to be used by external scripts) used to do change detection in
the mpv C code. If the resolution or payload did not change, it was not
re-rendered on the lower levels.
Apparently this made some people sad, so fix it. (But only after I told
them to fuck off.) (Well I didn't put it this way, but still.)
Making OSD/subtitle bitmaps refcounted was planend a longer time ago,
e.g. the sub_bitmaps.packed field (which refcounts the subtitle bitmap
data) was added in 2016. But nothing benefited much from it, because
struct sub_bitmaps was usually stack allocated, and there was this weird
callback stuff through osd_draw().
Make it possible to get actually refcounted subtitle bitmaps on the OSD
API level. For this, we just copy all subtitle data other than the
bitmaps with sub_bitmaps_copy(). At first, I had planned some fancy
refcount shit, but when that was a big mess and hard to debug and just
boiled to emulating malloc(), I made it a full allocation+copy. This
affects mostly the parts array. With crazy ASS subtitles, this parts
array can get pretty big (thousands of elements or more), in which case
the extra alloc/copy could become performance relevant. But then again
this is just pure bullshit, and I see no need to care. In practice, this
extra work most likely gets drowned out by libass murdering a single
core (while mpv is waiting for it) anyway. So fuck it.
I just wanted this so draw_bmp.c requires only a single call to render
everything. VOs also can benefit from this, because the weird callback
shit isn't necessary anymore (simpler code), but I haven't done anything
about it yet. In general I'd hope this will work towards simplifying the
OSD layer, which is prerequisite for making actual further improvements.
I haven't tested some cases such as the "overlay-add" command. Maybe it
crashes now? Who knows, who cares.
In addition, it might be worthwhile to reduce the code duplication
between all the things that output subtitle bitmaps (with repacking,
image allocation, etc.), but that's orthogonal.
When stats.lua is used without a video window then it uses the terminal.
On Windows, however, so far it disabled ansi escape sequences and used
plaintext unless ANSICON env is set.
It's unclear why it's disabled on windows, because at the time it was
added it only used bold by default and mpv ansi emulation on windows
already supported bold at that time.
We can guess that it was disabled because if the same config is used on
both linux and Windows, and it had complex escape sequences for
stats.lue, then it would be emulated incorrectly on Windows.
This shouldn't be an issue anymore, as the last two commits both enhance
the emulation to be quite complete (and graceful where it's not), and
also enable the much-more complete native VT terminal when possible
(Windows 10).
Just remove this windows exception at stats.lua.
It is more consistent for editions/chapters to go below either
the title or filename. They are all descriptive strings about
the media itself and not file metadata like filesize.
Suggested by Argon-
Edition information is conditional based on there being more than
one edition present. It is printed on the same line as Chapters to
save vertical space.
Apparently, this was a bit of a mess, which caused the bug fixed by
commit ec7f2388af. Try to improve this, and only use track selection
entries that exist.
e1e714ccc introduced a regression here when unloading a track (e.g. on
VO/AO initilization error), due to no corresponding option existing for
video/audio tracks with orders above 0, but the loop in
`mp_deselect_track` being hard-coded to clear tracks up to NUM_PTRACKS.
Introduce the simplest possible hackaround.
Consider e.g. --aid=2 with a file that has only 1 track. Then it would
fall back to selecting track 1. Stop doing this. If no matching track is
found, this will not select any track now.
Note that the fingerprint stuff (track_layout_hash in the source)
prevents softens the impact of this change. Without the fingerprint,
playing a dual-audio file with the second track selected, and then a
single-audio file, would play the second file without audio. But the
fingerprint resets it due to differences in the track list.
Try to exhaustively document this and tricky interactions between the
other features. What a damn mess, I think it's simply cursed. Of course
it's still my fault.
See: #7608
Some time ago, properties and options were mostly unified. However, the
track selection properties/options semantics are incompatible to this
change. I'm still trying to handle the fallout.
There are two things that are in the way:
1. Track properties somehow return the runtime selection, not the option
value (all while properties are supposed to be aliases to options
with the same name).
2. The user's track options are not supposed to be changed without
interaction. If a track is auto-selected, the property should return
its ID, but the option value should remain at "auto". Only if the
user actually writes to the property the option should change. E.g.
playing e.g. an audio-only file and then a normal video file not play
the video file with --vid=no just because the audio file had no video
track.
In addition to each of them being in conflict with the property/option
unification, attempt to fix one of them breaks the other one.
Today, we're trying to fix parts of this and avoiding an unfortunate
case where you can get a conflicting option/property value, and where
trying to select a track does nothing if the track to select has the
same ID as the option value.
This breaks 2. from above in certain situations. See manpage additions.
See: #7608
Edition title is already exposed in demux_edition, it was just never
added to the display. If no edition title exists it will fall back
to the edition number.
Keys and lines-to-scroll are configurabe, and the scroll keys are only
bound on pages which support scrolling (currently only page 4) - also
during oneshot (like the page-switching keys).
Scroll offset is reset for all pages on any key - except scroll keys, so
that entering or switching to a page resets the scroll, as well as when
"re-entering" the same page or "re-activating" the stats oneshot view.
TODO: print_page(..) is highly associated with extending the oneshot
timer if required. The timer handling can probably move into print_page
and removed from all the places which boilerplate its management.
This used 1 MB due to building the complete command and property list
when starting the script. These are needed only for auto-completion, so
build them only on demand. Since building them is fast enough, rebuild
them every time.
The key bindings table is not that much, but saves some KBs. Oddly, the
code to build it uses less memory than the table at runtime (???), so
build it at runtime as well.
Add 2 tactic collectgarbage() calls as well. This frees unused heap when
it is known that the script is going to be completely inactive until
re-enabled by the user.
The wakeup at the end of VO frame rendering seems redundant, because
after rendering almost no state changes. The player core can queue a new
frame once frame rendering begins, and there's a separate wakeup for
this. The only thing that actually changes is in->rendering. The only
thing that seems to depend on it and can trigger a wakeup is the
vo_still_displaying() function. Change it so that it needs an explicit
call to a new API function, so we can avoid wakeups in the common case.
The vo_still_displaying() code is mostly just moved around due to
locking and for avoiding forward declarations.
Also a somewhat risky change (tasty new bugs).
This should be unnecessary, since the VO itself performs wakeups once a
new frame can be queued. The only situation I can think of where this
might be required are EOF situations (which are always strange).
If I'm wrong, there'll be fun new bugs, probably causing frame drops or
temporary stalls.
In this case, init_buffers() was not called, and the unrelated cache
sample buffers were not initialized. It appears they are indeed
completely unrelated, so move their initialization away. Not sure what
exactly the purpose of calling init_buffers() is, maybe clearing old
data when displaying stats again. The new place for initializing the
cache sample buffers should achieve the same anyway.
Fixes: #7597
This should make it behave roughly like when switching from a file to
the next (clearing audio buffers, keeping AO, but closing AO if the
audio format seems to have changed and gapless mode is "weak").
Not necessarily useful, but harmless and may help with #7579 (untested).
This is the proper fix for 1e7802. Turns out the solution is dead
simple: we can still set the allocator with lua_getallocf /
lua_setalloc.
This commit makes memory accounting work on luajit as well.
This is a stopgap measure. In theory we could maybe poll the memory
usage on luajit, but for now, simply reverting this part of fd3caa26
makes Lua work again. (And we can still collect cpu usage metrics)
Proper solution pending (tm)
While --input-file was removed for justified reasons, wanting to pass
down socket FDs this way is legitimate, useful, and easy to implement.
One odd thing is that
Fixes: #7592
Add an infrastructure for collecting performance-related data, use it in
some places. Add rendering of them to stats.lua.
There were two main goals: minimal impact on the normal code and normal
playback. So all these stats_* function calls either happen only during
initialization, or return immediately if no stats collection is going
on. That's why it does this lazily adding of stats entries etc. (a first
iteration made each stats entry an API thing, instead of just a single
stats_ctx, but I thought that was getting too intrusive in the "normal"
code, even if everything gets worse inside of stats.c).
You could get most of this information from various profilers (including
the extremely primitive --dump-stats thing in mpv), but this makes it
easier to see the most important information at once (at least in
theory), partially because we know best about the context of various
things.
Not very happy with this. It's all pretty primitive and dumb. At this
point I just wanted to get over with it, without necessarily having to
revisit it later, but with having my stupid statistics.
Somehow the code feels terrible. There are a lot of meh decisions in
there that could be better or worse (but mostly could be better), and it
just sucks but it's also trivial and uninteresting and does the job. I
guess I hate programming. It's so tedious and the result is always shit.
Anyway, enjoy.
I think that makes more sense.
And also remove the graph from the total cache usage, since that wasn't
very interesting. So there's still a total of 2 graphs.
That's where it comes from after all. The other property does not have
much of a reason to exist anymore, but there's no real reason to remove
it either.
wm4