The previous commits changed vo_vdpau so that these options are set by
vf_vdpaupp, and the corresponding vo_vdpau were ignored. But for
compatibility, keep the "old" options working.
The value of this is questionable - maybe the vo_vdpau options should
just be removed. For now, at least demonstrate that it's possible.
The "deint" suboption still doesn't work, because the framerate doubling
logic required for some deint modes was moved to vf_vdpaupp. This
requires more elaborate workarounds.
This is slightly incomplete: the mixer options, such as sharpen and
especially deinterlacing, are ignored. This also breaks automatic
enabling of interlacing with 'D' or --deinterlace. These issues will be
fixed later in the following commits.
Note that we keep all the custom vdpau queue stuff. This will also be
simplified later.
In theory, returning the screenshot with original pixel aspect would
allow avoiding scaling them with image formats that support non-square
pixels, but in practice this isn't used anyway (nothing seems to
understand e.g. jpeg aspect ratio tags).
This might be a good idea in order to prevent queuing a frame too far in
the future (causing apparent freezing of the video display), or dropping
an infinite number of frames (also apparent as freezing).
I think at this point this is most of what we can do if the vdpau time
source is unreliable (like with Mesa). There are still inherent race
conditions which can't be fixed.
The strange thing about this code was the shift parameter of the
prev_vs2 function. The parameter is used to handle timestamps before the
last vsync, since the % operator handles negative values incorrectly.
Most callers set shift to 0, and _usually_ pass a timestamp after the
last vsync. One caller sets it to 16, and can pass a timestamp before
the last timestamp.
The mystery is why prev_vs2 doesn't just compensate for the % operator
semantics in the most simple way: if the result of the operator is
negative, add the divisor to it. Instead, it adds a huge value to it
(how huge is influenced by shift). If shift is 0, the result of the
function will not be aligned to vsyncs.
I have no idea why it was written in this way. Were there concerns about
certain numeric overflows that could happen in the calculations? But I
can't think of any (the difference between ts and vc->recent_vsync_time
is usually not that huge). Or is there something more clever about it,
which is important for the timing code? I can't think of anything
either.
So scrap it and simplify it.
vo_vdpau used a somewhat complicated and fragile mechanism to convert
the vdpau time to internal mpv time. This was fragile as in it couldn't
deal well with Mesa's (apparently) random timestamps, which can change
the base offset in multiple situations. It can happen when moving the
mpv window to a different screen, and somehow it also happens when
pausing the player.
It seems this mechanism to synchronize the vdpau time is not actually
needed. There are only 2 places where sync_vdptime() is used (i.e.
returning the current vdpau time interpolated by system time).
The first call is for determining the PTS used to queue a frame. This
also uses convert_to_vdptime(). It's easily replaced by querying the
time directly, and adding the wait time to it (rel_pts_ns in the patch).
The second call is pretty odd: it updates the vdpau time a second time
in the same function. From what I can see, this can matter only if
update_presentation_queue_status() is very slow. I'm not sure what to
make out of this, because the call merely queries the presentation
queue. Just assume it isn't slow, and that we don't have to update the
time.
Another potential issue with this is that we call VdpPresentationQueueGetTime()
every frame now, instead of every 5 seconds and interpolating the other
calls via system time. More over, this is per video frame (which can be
portantially dropped, and not per actually displayed frame. Assume this
doesn't matter.
This simplifies the code, and should make it more robust on Mesa. But
note that what Mesa does is obviously insane - this is one situation
where you really need a stable time source. There are still plenty of
race condition windows where things can go wrong, although this commit
should drastically reduce the possibility of this.
In my tests, everything worked well. But I have no access to a Mesa
system with vdpau, so it needs testing by others.
See github issues #520, #694, #695.
Reduce most dependencies on struct mp_csp_details, which was a bad first
attempt at dealing with colorspace stuff. Instead, consistently use
mp_image_params.
Code which retrieves colorspace matrices from csputils.c still uses this
type, though.
They were used by ancient libavcodec versions. This also removes the
need to distinguish vdpau image formats at all (since there is only
one), and some code can be simplified.
The main difference between the old and new callbacks is that the old
callbacks required passing the window size, which is and always was very
inconvenient and confusing, since the window size is already in
vo->dwidth and vo->dheight.
vo->aspdat is basically an outdated version of vo->params, plus some
weirdness. Get rid of it, which will allow further cleanups and which
will make multithreading easier (less state to care about).
Also, simplify some VO code by using mp_image_set_attributes() instead
of caring about display size, colorspace, etc. manually. Add the
function osd_res_from_image_params(), which is often needed in the case
OSD renders into an image.
Do two things:
1. add locking to struct osd_state
2. make struct osd_state opaque
While 1. is somewhat simple, 2. is quite horrible. Lots of code accesses
lots of osd_state (and osd_object) members. To make sure everything is
accessed synchronously, I prefer making osd_state opaque, even if it
means adding pretty dumb accessors.
All of this is meant to allow running VO in their own threads.
Eventually, VOs will request OSD on their own, which means osd_state
will be accessed from foreign threads.
Note that this will print a difference even with perfect sync, because
the code queues the frames _between_ vsync, probably for error margin
(though I don't understand why it uses the exact values chosen).
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
The --flip option flipped the image upside-down, by trying to use VO
support, or if not available, by inserting a video filter. I'm not sure
why it existed. Maybe it was important in ancient times when VfW based
decoders output an image this way (but even then, flipping an image is a
free operation by negating the stride).
One nice thing about this is that it provided a possible path for
implementing video orientation, which is a feature we should probably
support eventually. The important part is that it would be for free for
VOs that support it, and would work even with hardware decoding.
But for now get rid of it. It's useless, trivial, stands in the way, and
supporting video orientation would require solving other problems first.
The old ffmpeg vdpau support code uses separate vdpau pixel formats for
each decoder (pretty much because mplayer's architecture sucked), which
just gets into the way. Force the old decoder's output to IMGFMT_VDPAU,
and remove IMGFMT_IS_VDPAU() where we can remove it.
This should completely remove the differences betwene the old and new
vdpau decoder outside of the decoder.
This means most code accessing this struct must now include hwdec.h
instead of dec_video.h. I just put it into dec_video.h at first because
I thought a separate file would be a waste, but it's more proper to do
it this way, as there are too many files which include dec_video.h only
to get the mp_hwdec_info definition.
The configure followed 5 different convetions of defines because the next guy
always wanted to introduce a new better way to uniform it[1]. For an
hypothetic feature 'hurr' you could have had:
* #define HAVE_HURR 1 / #undef HAVE_DURR
* #define HAVE_HURR / #undef HAVE_DURR
* #define CONFIG_HURR 1 / #undef CONFIG_DURR
* #define HAVE_HURR 1 / #define HAVE_DURR 0
* #define CONFIG_HURR 1 / #define CONFIG_DURR 0
All is now uniform and uses:
* #define HAVE_HURR 1
* #define HAVE_DURR 0
We like definining to 0 as opposed to `undef` bcause it can help spot typos
and is very helpful when doing big reorganizations in the code.
[1]: http://xkcd.com/927/ related
This one really did bite me hard (see previous commit), so enable it by
default.
Fix some cases of shadowing throughout the codebase. None of these
change behavior, and all of these were correct code, and just tripped up
the warning.
vo_vdpau is the only VO which implements VOCTRL_RESET. Redrawing the
last output frame is hard, because the output could consist of several
source video frames with certain types of post-processing
(deinterlacing). Implement redrawing as special case by keeping the
previous video frames aside until at least one new frame is decoded.
This improves the previous commit, but is separate, because it's rather
complicated.
Before, a VO could easily refuse to respond to VOCTRL_REDRAW_FRAME,
which means the VO wouldn't redraw OSD and window contents, and the
player would appear frozen to the user. This was a bit stupid, and makes
dealing with some corner cases much harder (think of --keep-open, which
was hard to implement, because the VO gets into this state if there are
no new video frames after a seek reset).
Change this, and require VOs to always react to VOCTRL_REDRAW_FRAME.
There are two aspects of this: First, behavior after a (successful)
vo_reconfig() call, but before any video frame has been displayed.
Second, behavior after a vo_seek_reset().
For the first issue, we define that sending VOCTRL_REDRAW_FRAME after
vo_reconfig() should clear the window with black. This requires minor
changes to some VOs. In particular vaapi makes this horribly
complicated, because OSD rendering is bound to a video surface. We
create a black dummy surface for this purpose.
The second issue is much simpler and works already with most VOs: they
simply redraw whatever has been uploaded previously. The exception is
vdpau, which has a complicated mechanism to track and filter video
frames. The state associated with this mechanism is completely cleared
with vo_seek_reset(), so implementing this to work as expected is not
trivial. For now, we just clear the window with black.
Apparently this was dropped some years ago, but judging from MPlayer's
handling of this, the original code wasn't so great anyway. The new
code handling clearing of panscan borders correctly, and integrates
better with the YUV path. (Although the VDPAU API sure makes this
annoying with its separate surface types for RGB.)
Note that we create 5 surfaces for some reason - I don't think this
makes too much sense (because we can't use the deinterlacer with RGB
surfaces), but at least it reduces the amount of differences with
the YUV code path.
Clearing the borders is done by drawing a single black pixel over the
window. This sounds pretty dumb, but it appears to work well, and
there is no other API for that. (One could try to use the video mixer
for this purpose, since it has all kinds of features, including
compositing multiple RGBA surfaces and clearing the window background.
But it would require an invisible dummy video surface to make the
video mixer happy, and that's getting too messy.)
When panscan was used, i.e. the video is cropped to make the video fill
the screen if video and screen aspects don't match, screenshots
contained only the visible region of the source video, stretched to
original video size.
The VDPAU default colorkey, although it seems to be driver specific, is
usually green. This is a pretty annoying color, and you usually see it
briefly (as flashes) if the VDPAU window resizes.
Change it to some shade of black. The new default color is close to what
MPlayer picks as colorkey (and apparently it worked well for them):
VdpColor vdp_bg = {0.01, 0.02, 0.03, 0};
Since our OPT_COLOR can set 8 bit colors only, we use '#020507' instead,
which should be the same assuming 8 bit colors.
Obviously, you can't use black, because black is a way too common color,
and would make it too easy to observe the colorkey effect when e.g.
moving a terminal with black background over the video window.
Formally, this sets the "background color" of the presentation queue.
But in practice, this color is also used as colorkey.
This commit doesn't change the VDPAU default yet.
Instead of generating vdpau_template.c with a Perl script, just include
the generated file in git. This is ok because it changes very rarely,
and the script is larger than the output it generates.
It also simplify the Makefile, and fixes the build. The problem was that
transitive dependencies do not work with generated files: there is no
dependency information yet when building it the first time. I overlooked
this because I didn't delete the .d files for testing (which contained
the correct dependencies, but only _after_ a first successful build).
Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This
file is named so because because it's written against the "old"
libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau").
Add support for the "new" libavcodec vdpau support. This was recently
added and replaces the "old" vdpau parts. (In fact, Libav is about to
deprecate and remove the "old" API without deprecation grace period,
so we have to support it now. Moreover, there will probably be no Libav
release which supports both, so the transition is even less smooth than
we could hope, and we have to support both the old and new API.)
Whether the old or new API is used is checked by a configure test: if
the new API is found, it is used, otherwise the old API is assumed.
Some details might be handled differently. Especially display preemption
is a bit problematic with the "new" libavcodec vdpau support: it wants
to keep a pointer to a specific vdpau API function (which can be driver
specific, because preemption might switch drivers). Also, surface IDs
are now directly stored in AVFrames (and mp_images), so they can't be
forced to VDP_INVALID_HANDLE on preemption. (This changes even with
older libavcodec versions, because mp_image always uses the newer
representation to make vo_vdpau.c simpler.)
Decoder initialization in the new code tries to deal with codec
profiles, while the old code always uses the highest profile per codec.
Surface allocation changes. Since the decoder won't call config() in
vo_vdpau.c on video size change anymore, we allow allocating surfaces
of arbitrary size instead of locking it to what the VO was configured.
The non-hwdec code also has slightly different allocation behavior now.
Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau
doesn't work anymore (a warning suggesting the --hwdec option is
printed instead).
In general, this warning can hint to actual bugs. We don't enable it
yet, because it would conflict with some unmerged code, and we should
check with clang too (this commit was done by testing with gcc).
There was a MPOpts fullscreen field, a mp_vo_opts.fs field, and
VOFLAG_FULLSCREEN. Remove all these and introduce a
mp_vo_opts.fullscreen flag instead.
When VOs receive VOCTRL_FULLSCREEN, they are supposed to set the
current fullscreen mode to the state in mp_vo_opts.fullscreen. They
also should do this implicitly on config().
VOs which are capable of doing so can update the mp_vo_opts.fullscreen
if the actual fullscreen mode changes (e.g. if the user uses the
window manager controls). If fullscreen mode switching fails, they
can also set mp_vo_opts.fullscreen to the actual state.
Note that the X11 backend does almost none of this, and it has a
private fs flag to store the fullscreen flag, instead of getting it
from the WM. (Possibly because it has to deal with broken WMs.)
The fullscreen option has to be checked on config() to deal with
the -fs option, especially with something like:
mpv --fs file1.mkv --{ --no-fs file2.mkv --}
(It should start in fullscreen mode, but go to windowed mode when
playing file2.mkv.)
Wayland changes by: Alexander Preisinger <alexander.preisinger@gmail.com>
Cocoa changes by: Stefano Pigozzi <stefano.pigozzi@gmail.com>
GetTimer() is generally replaced with mp_time_us(). Both calls return
microseconds, but the latter uses int64_t, us defined to never wrap,
and never returns 0 or negative values.
GetTimerMS() has no direct replacement. Instead the other functions are
used.
For some code, switch to mp_time_sec(), which returns the time as double
float value in seconds. The returned time is offset to program start
time, so there is enough precision left to deliver microsecond
resolution for at least 100 years. Unless it's casted to a float
(or the CPU reduces precision), which is why we still use mp_time_us()
out of paranoia in places where precision is clearly needed.
Always switch to the correct time. The whole point of the new timer
calls is that they don't wrap, and storing microseconds in unsigned int
variables would negate this.
In some cases, remove wrap-around handling for time values.
