Move the implementation, of which most was in tl_cue.c, to demux_cue.c.
Currently, this is illogical, because tl_cue.c still accesses MPContext.
This is going to change, and then it will be better if everything is in
demux_cue.c. This is only a separate commit to distinguish code movement
and actual work; the next commit will do the actual work.
Instead of accessing MPContext in player/timeline/*, create a separate
context struct, which the timeline loaders fill out. It turns out that
there's not much in the way too big MPContext that these need to access.
One major PITA is managing (and closing) the set of open demuxers. The
problem is that we need a list of all demuxers to make sure no unneeded
streams are enabled.
This adds a callback to the demuxer_desc struct, with the intention of
leaving to to the demuxer to call the right loader, instead of
explicitly checking the demuxer type and dispatching manually in common
code. I also considered making the timeline part of the demuxer state,
but decided against: it's too much of a mess wrt. memory management and
threading, and also doesn't make it clear who owns the child demuxers.
With the struct timeline decoupled from the demuxer state, it's at least
somewhat clear that the child demuxers are independent from the "main"
demuxer.
The actual changes to player/timeline/* are separated in the following
commits, because they're quite verbose. Some artifacts will be removed
later as soon as there's only 1 timeline loading mechanism.
Remove the confusing crap that allowed a filter using the libavfilter
bridge to be compiled without libavfilter. Instead, compile the wrappers
only if libavfilter is enabled at compile time.
The only filter which still requires it is vf_stereo3d (unfortunately).
Special-case this one. (The whole filter and how it interacts with lavfi
is pure braindeath anyway.)
If "--af=rubberband" is used, librubberband will be used to speed up or
slow down audio with pitch correction.
This still has some problems: the audio delay is not calculated
correctly, so the audio position jitters around by a few milliseconds.
This will probably ruin video timing.
gl_common.c contained the function loader (which is big) and additional
utility functions (not so big, but will grow when moving more out of
gl_video.c). Just split them. There are no changes other than some
modifications to comments.
This was apparently useful for correct interlaced scaling (although I
don't know anyone who used this). It was rarely used (if at all), had an
inconvenient output format (packed YUV), and now has a better solution
in libavfilter (using the libavfilter "scale" filter via vf_lavfi).
There is no reason to keep this filter any longer.
It's entirely useless. I left it in for a while, because the analog TV
code had a transitional bug that could switch chroma planes, but it was
fixed long ago. It's also available in libavfilter.
Apparently it was completely broken and essentially did nothing. This
was broken sometime in early mpv or mplayer2 times.
Get rid of it. If you _really_ need it, wait until FFmpeg ports it from
MPlayer, which will happen very soon.
The symlink trick made waf go crazy (deleting source files, getting
tangled up in infinite recursion... I wish I was joking). This means we
still can't build the client API examples in a reasonable way using the
include files of the local repository (instead of globally installed
headers). Not building them at all is better than deleting source files.
Instead, provide some manual instructions how to build each example
(except for the Qt examples, which provide qmake project files).
Our own code was introduced when FFmpeg didn't provide this API (or
maybe didn't even have a way to determine the CPU count). But now,
av_cpu_count() is available for all FFmpeg/Libav versions we support,
and there's no reason to have our own code.
libavutil's code seems to be slightly more sophisticated than our's, and
it's possible that the detected CPU count is different on some platforms
after this change.
The examples simple.c and cocoabasic.m can be compiled without
installing libmpv. But also, they didn't use the correct include path
libmpv programs normally use, so they couldn't be built with a properly
installed system-libmpv. That's pretty bad for examples, which are
supposed to show how to use libmpv correctly.
So do some bullshit that symlinks libmpv to a "mpv" include directory
under the build directory. This name-mismatch is a direct consequence of
the bullshit done in 499a6758 (requested in #539 for dumb reasons). (We
don't want to name the client API headers directory "mpv", because that
would be too unspecific, and clashes with having the mpv binary in the
same directory.)
If you have spaces or other "unusual" characters in your paths, the
build will break, because I couldn't find out where waf hides its
function to escape shell parameters (or a way to invoke programs
without involving the shell). Neither does such a thing to be
documented, nor do they seem to have a clear way to do this in
their code.
This also doesn't compile the Qt examples, because everything becomes
even more terrible from there on.
There's no reason why parts of this demuxer would be in a separate
source file. The existence of this code is already somewhat questionable
anyway, so it may as well be dumped into a single file.
Even stranger that demux.c included mf.h for no reason (it was an
artifact from 2002 when the architecture was uncleaner).
Instead of just failing during channel map selection, try to select a close
layout that makes most sense and upmix/downmix to that instead of failing AO
initialization. The heuristic is rather simple, and uses the following steps:
1) If mono is required always prefer stereo to a multichannel upmix.
2) Search for an upmix that is an exact superset of the required channel map.
3) Search for a downmix that is the exact subset of the required channel map.
4) Search for either an upmix or downmix that is the closest (minimum difference
of channels) to the required channel map.
Makes all of overlay_add work on windows/mingw.
Since we now don't explicitly check for mmap() anymore (it's always
present), this also requires us to make af_export.c compile, but I
haven't tested it.
This adds API to libmpv that lets host applications use the mpv opengl
renderer. This is a more flexible (and possibly more portable) option to
foreign window embedding (via --wid).
This assumes that methods like context sharing and multithreaded OpenGL
rendering are infeasible, and that a way is needed to integrate it with
an application that uses a single thread to render everything.
Add an example that does this with QtQuick/qml. The example is
relatively lazy, but still shows how relatively simple the integration
is. The FBO indirection could probably be avoided, but would require
more work (and would probably lead to worse QtQuick integration, because
it would have to ignore transformations like rotation).
Because this makes mpv directly use the host application's OpenGL
context, there is no platform specific code involved in mpv, except
for hw decoding interop.
main.qml is derived from some Qt example.
The following things are still missing:
- a way to do better video timing
- expose GL renderer options, allow changing them at runtime
- support for color equalizer controls
- support for screenshots
This is an ancient filter, and we assume it's not useful anymore.
If you really want this, it's still available in libavfilter (e.g. via
--vf=lavfi=[pp...]). The disadvantage is that mpv doesn't pass through
QP information to libavfilter. (This was probably the reason vf_pp still
was part of mpv - it was slightly easier to pass QP internally.)
This wasn't done before because there was no advantage in "abstracting"
it. This changed, and putting this into its own files is better than
messing it into gl_common.c/h.
The subprocess code was already split into fairly general functions,
separate from the Lua code. It's getting pretty big though, especially
the Windows-specific parts, so move it into its own files.
Implement skeleton IMMNotificationClient to watch for changes in the
sound device. This will make recovery possible from changes shared
mode sample rate, bit depth, "enhancements"/effects and even graceful
device removal.
http://msdn.microsoft.com/en-us/library/windows/desktop/dd371417%28v=vs.85%29.aspx
Signed-off-by: Kevin Mitchell <kevmitch@gmail.com>
Use a pseudo-filter when changing speed with resampling, instead of
somehow changing a samplerate somewhere. This uses the same underlying
mechanism, but is a bit more structured and cleaner. It also makes some
of the following changes easier.
Since we now always use filters to change audio speed, move most of the
work set_playback_speed() does to recreate_audio_filters().
No development activity (or even any sign of life) for almost a year.
A replacement based on youtube-dl will probably be provided before the
next mpv release. Ask on the IRC channel if you want to test.
Simplify the Lua check too: libquvi linking against a different Lua
version than mpv was a frequent issue, but with libquvi gone, no
direct dependency uses Lua, and such a clash is rather unlikely.
This provides some helper functions and classes for C++/Qt. As the top
of qthelper.hpp says, this is built on top of the client API, and is a
mere helper provided for convenience.
Maybe this should be a separate library, but on the other hand I don't
see much of a point in that. It's also header-only, but C++ people like
such things. This makes it easier for us, because we don't need to care
about ABI compatibility.
The client API doesn't change, but bump it so that those who are using
this header can declare a proper dependency.
Objective-C categories need special linker flags from the user when statically
linking (-ObjC LDFLAG), so make everyone's life simpler and remove them.
Use libwaio to read from pipes (stdin or named pipes) on Windows. This
liberates us from nasty issues, such as pipes (as created by most
programs) not being possible to read in a non-blocking or event-driven
way. Although it would be possible to do that in a somewhat sane way
on Vista+, it's still not easy, and on XP it's especially hard. libwaio
handles these things for us.
Move pipe.c to pipe-unix.c, and remove Windows specific things. Also
adjust the input.c code to make this work cleanly.
1. Separate buffer and temporary file handling from the vo to make maintenance
and reading code easier
2. Skip resizing as much as possible if back buffer is still busy.
3. Detach and mark osd buffers for deletion if we want to redraw them and they
are still busy. This could be a possible case for the video buffers as
well. Maybe better than double buffering.
All the above steps made it possible to have resizing without any artifacts
even for subtitles. Also fixes dozen of bugs only I knew, like broken subtitles
for rgb565 buffers. I can now sleep at night again.
OSX is POSIX conformant, but it's a sad joke: it provides the
<semaphore.h> prototype as the standard demands, but they're empty
wrappers, and all functions just return ENOSYS.
Emulate them similar to how osdep/io.h emulate filesystem functions on
Windows. By including the header, working sem_* functions become
available.
To make it async-signal safe, use a pipe for wakeup (write() is AS-safe,
but mutexes can't be). Actually I'm not sure anymore if we really need
AS-safety, but for now the emulation can do it.
On Linux, the system provides a far more efficient and robust
implementation. We definitely want to avoid using the emulation if
possible, so this code is active on OSX only. For convenience we always
build the source file though, even if the implementation is disabled and
no actual code is generated.
(Linux provides working semaphores, but is formally not POSIX
conformant. On OSX it's the opposite. Is POSIX a complete joke?)
This was kept in the codebase because it is slightly faster than --vo=opengl
on really old Intel cards (from the GMA era). Time to kill it, and let it rest.
Fixes#1061
bstr.c doesn't really deserve its own directory, and compat had just
a few files, most of which may as well be in osdep. There isn't really
any justification for these extra directories, so get rid of them.
The compat/libav.h was empty - just delete it. We changed our approach
to API compatibility, and will likely not need it anymore.
Abandon the "old" infrastructure for --input-file (mp_input_add_fd(),
select() loop, non-blocking reads). Replace it with something that
starts a reader thread, using blocking input.
This is for the sake of Windows. Windows is a truly insane operating
system, and there's not even a way to read a pipe in a non-blocking
way, or to wait for new input in an interruptible way (like with
poll()). And unfortunately, some want to use pipe to send input to
mpv. There are probably (slightly) better IPC mechanisms available
on Windows, but for the sake of platform uniformity, make this work
again for now.
On Vista+, CancelIoEx() could probably be used. But there's no way on
XP. Also, that function doesn't work on wine, making development
harder. We could forcibly terminate the thread, which might work, but
is unsafe. So what we do is starting a thread, and if we don't want
the pipe input anymore, we just abandon the thread. The thread might
remain blocked forever, but if we exit the process, the kernel will
forcibly kill it. On Unix, just use poll() to handle this.
Unfortunately the code is pretty crappy, but it's ok, because it's late
and I wanted to stop working on this an hour ago.
Tested on wine; might not work on a real Windows.
Since the 'syms' tool is shipped in waf's extras, when using system waf the
default tool overrides our own. Force our syms tool by providing the tooldir.
Fixes#1006
This is probably nicer. The actual version number doesn't change (other
than the minor being incremented).
The "| 0UL" is to make the type unsigned long int, like it was before.
Instead of using a regex to match names to be exported from the libmpv
dynamic shared library, use a libmpv.def file, which lists all exported
functions explicitly.
This reduces the platform specifics in syms.py. I'm not sure if the
separate compile_sym task is still needed (it could probably be
collapsed, which would concentrate the platform specifics into one
place).
Use OPT_KEYVALUELIST() for all places where AVOptions are directly set
from mpv command line options. This allows escaping values, better
diagnostics (also no more "pal"), and somehow reduces code size.
Remove the old crappy option parser (av_opts.c).
Plan 9 has a very interesting synchronization mechanism, the
rendezvous() call. A good property of this is that you don't need to
explicitly initialize and destroy a barrier object, unlike as with e.g.
POSIX barriers (which are mandatory to begin with). Upon "meeting", they
can exchange a value.
This mechanism will be nice to synchronize certain stages of
initialization between threads in the following commit.
Unlike Plan 9 rendezvous(), this is not implemented with a hashtable,
because that would require additional effort (especially if you want to
make it actually scele). Unlike the Plan 9 variant, we use intptr_t
instead of void* as type for the value, because I expect that we will be
mostly passing a status code as value and not a pointer. Converting an
integer to void* requires two cast (because the integer needs to be
intptr_t), the other way around it's only one cast.
We don't particularly care about performance in this case either. It's
simply not important for our use-case. So a simple linked list is used
for waiters, and on wakeup, all waiters are temporarily woken up.
DVD and Bluray (and to some extent cdda) require awful hacks all over
the codebase to make them work. The main reason is that they act like
container, but are entirely implemented on the stream layer. The raw
mpeg data resulting from these streams must be "extended" with the
container-like metadata transported via STREAM_CTRLs. The result were
hacks all over demux.c and some higher-level parts.
Add a "disc" pseudo-demuxer, and move all these hacks and special-cases
to it.
The mplayer1/2/mpv CoreAudio audio output historically contained both usage
of AUHAL APIs (these go through the CoreAudio audio server) and the Device
based APIs (used only for output of compressed formats in exclusive mode).
The latter is a very unwieldy and low level API and pretty much forces us to
write a lot of code for little workr. Also with the widespread of HDMI, the
actual need for outputting compressed audio directly to the device is getting
lower (it was very useful with S/PDIF for bandwidth constraints not allowing
a number if channels transmitted in LPCM).
Considering how invasive it is (uses hog/exclusive mode), the new AO
(`ao_coreaudio_device`) is not going to be autoprobed but the user will have
to select it.
For remarks, pretty much see the manpage additions. Could help with
network streams that require too much seeking (maybe), or might be
extended to help with the use case of watching and downloading a file
at the same time.
In general, it might be a useless feature and could be removed again.
It is reasonably stable, so all further changes will be versioned.
Also change how the libmpv version number is generated. Fix the patch
version number to 0; I don't think we have a use for this. In
particular, the version doesn't version mpv, just the client API.
Does anyone actually use this?
For now, update it, because it's the only case left where an option
points to a global variable (and not a struct offset).
This was never intended to be installed; waf just picked it up
automagically. There's also a closed ticket on github where someone
complains that the program "simple" is installed, and I didn't realize
at this point that it was actually installed by default when enabling
the client API.
If a single person complains, I will readd it. But I don't expect that
this will happen.
The main reason for removing this is that it's some of the most unclean
code remaining, it's unmaintained, and I've never ever heard of someone
using it.
Currently, vo_reconfig() calculates the requested window size and sets
the vo->dwidth/dheight fields _if_ VOCTRL_UPDATE_SCREENINFO is
implemented by the VO or the windowing backend. The window size can be
different from the display size if e.g. the --geometry option is used.
It will also set the vo->dx/dy fields and read vo->xinerama_x/y.
It turned out that this is very backwards and actually requires the
windowing backends to workaround these things. There's also
MPOpts.screenwidth/screenheight, which used to map to actual options,
but is now used only to communicate the screen size to the vo.c code
calculating the window size and position.
Change this by making the window geometry calculations available as
separate functions. This commit doesn't change any VO code yet, and just
emulates the old way using the new functions. VO code will remove its
usage of VOCTRL_UPDATE_SCREENINFO and use the new functions directly.
This factors out some code from vo_vdpau.c, especially deinterlacing
handling. The intention is to use this for vo_vdpau.c to make the logic
significantly easier, and to use it for vo_opengl (gl_hwdec_vdpau.c) to
allow selecting deinterlace and postprocessing modes.
As of this commit, the filter actually does nothing, since both vo_vdpau
and vo_opengl treat the generated images as normal vdpau images. This
will change in the following commits.
This was part of osdep/threads.c out of laziness. But it doesn't contain
anything OS dependent. Note that the rest of threads.c actually isn't
all that OS dependent either (just some minor ifdeffery to work around
the lack of clock_gettime() on OSX).
Not needed anymore. I'm not opposed to having asm, but inline asm is too
much of a pain, and it was planned long ago to eventually get rid fo all
inline asm uses.
For the note, the inline asm use that was removed with the previous
commits was almost worthless. It was confined to video filters, and most
video filtering is now done with libavfilter. Some mpv filters (like
vf_pullup) actually redirect to libavfilter if possible.
If asm is added in the future, it should happen in the form of external
files.
These playlist parsers are all what's left from the old mplayer playlist
parsing code. All of it is old code that does little error checking; the
type of C string parsing code that gives you nightmare.
Some playlist parsers have been rewritten and are located in
demux_playlist.c. The removed formats were not reimplemented. ASX and
SMIL use XML, and since we don't want to depend on a full blown XML
parser, this is not so easy. Possibly these formats could be supported
by writing a very primitive XML-like lexer, which would lead to success
with most real world files, but I haven't attempted that. As for NSC, I
couldn't find any URL that worked with MPlayer, and in general this
formats seems to be more than dead.
Move playlist_parse_file() to playlist.c. It's pretty small now, and
basically just opens a stream and a demuxer. No use keeping
playlist_parser.c just for this.
Mainly meant to apply simple VapourSynth filters to video at runtime.
This has various restrictions, which are listed in the manpage.
Additionally, this actually copies video frames when converting frame
references from mpv to VapourSynth, and a second time when going from
VapourSynth to mpv. This is inefficient and could probably be easily
improved. But for now, this is simpler, and in fact I'm not sure if
we even can references VapourSynth frames after the core has been
destroyed.
This cd_info_t struct was practically unused. The only thing it did was
storing the track name of the form "Track %d" in a very roundabout way.
Remove it. (It made more sense when there was still CDDB support.)
This reads MPV_CLIENT_API_VERSION from the source header, and turns it
into a 3 part version number.
E.g. if MPV_CLIENT_API_VERSION were 0x12abcdef, this would result in
"18.171.773615" (8 bits, 8 bits, 16 bits).
We'll see if this is actually useful, or if it's too clever.
Rename it to --enable-libmpv-shared. The option name didn't really
tell much. When we add the possibility to create a static library,
it would also be bad if that were named --enable-static (because it
would sound like it does what --static-build does).
ao_wasapi.c was almost entirely init code mixed with option code and
occasionally actual audio handling code. Split most things to
ao_wasapi_utils.c and keep the audio handling code in ao_wasapi.c.
This has 2 goals:
- Ensure that AOs have always enough data, even if the device buffers
are very small.
- Reduce complexity in some AOs, which do their own buffering.
One disadvantage is that performance is slightly reduced due to more
copying.
Implementation-wise, we don't change ao.c much, and instead "redirect"
the driver's callback to an API wrapper in push.c.
Additionally, we add code for dealing with AOs that have a pull API.
These AOs usually do their own buffering (jack, coreaudio, portaudio),
and adding a thread is basically a waste. The code in pull.c manages
a ringbuffer, and allows callback-based AOs to read data directly.
This library will export the client API functions.
Note that this doesn't allow compiling the command line player to link
against this library yet. The reason is that there's lots of weird stuff
required to setup the execution environment (mostly Windows and OSX
specifics), as well as things which are out of scope of the client API
and every application has to do on its own. However, since the mpv
command line player basically reuses functions from the mpv core to
implement these things, it's not very easy to separate the command
line player form the mpv core.
Add a client API, which is intended to be a stable API to get some rough
control over the player. Basically, it reflects what can be done with
input.conf commands or the old slavemode. It will replace the old
slavemode (and enable the implementation of a new slave protocol).
Application icon was added to the Dock only when run inside of a bundle. That
was handled automatically by OS X using the Info.plist definition.
To add the Application icon when run as a CLI program, I used the samme
approach in the X11 code and loaded the icon as a static binary blob inside
of mpv's binary. This is the simplest approach as it avoid headackes when
relocating the binary and such.
This finally gets rid of the LaTeX dependency.
We should actually be using docultils directly here, but I didn't
do this because of all the potential Python 2/3 breakage.
This is probably useful.
Note that this includes a small, stupid hack to prevent loading of the
config file if vf_lavfi is not available. The profile by default uses
vf_lavfi, and the config parser will output errors if vf_lavfi is not
available.
As another caveat, we install the example profile even if encoding is
disabled (though we don't load it, since this would print errors).
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
This readds a more or less completely new dvdnav implementation, though
it's based on the code from before commit 41fbcee. Note that this is
rather basic, and might be broken or not quite usable in many cases.
Most importantly, navigation highlights are not correctly implemented.
This would require changes in the FFmpeg dvdsub decoder (to apply a
different internal CLUT), so supporting it is not really possible right
now. And in fact, I don't think I ever want to support it, because it's
a very small gain for a lot of work. Instead, mpv will display fake
highlights, which are an approximate bounding box around the real
highlights.
Some things like mouse input or switching audio/subtitles stream using
the dvdnav VM are not supported.
Might be quite fragile on transitions: if dvdnav initiates a transition,
and doesn't give us enough mpeg data to initialize video playback, the
player will just quit.
This is added only because some users seem to want it. I don't intend to
make mpv a good DVD player, so the very basic minimum will have to do.
How about you just convert your DVD to proper video files?
This gets rid of the vf_vo pseudo-filter. It ends the idea of MPlayer's
architecture that the VO is just a (terminating) video filter. It didn't
really work for us with respect to video timing (the "end" of the video
chain isn't really made for video timing, and making it do so would be
awkward), and now we're removing it entirely. We will be able to fix
some things, such as properly draining video on reconfiguration.
Apparently you can get this with: stereo3d=ab[2]{l,r}:sbs[2]{l,r}
So it seems the filter is redundant and can be removed.
Also see FFmpeg commit 2f11aa141a01.
The harder work was done in the previous commits. After that this feature comes
out almost for free.
The only problem is I can't get the textures created with CGLTexImageIOSurface2D
to download properly, thus the code performs download using some CoreVideo APIs.
If someone knows why download of textures created with CGLTexImageIOSurface2D
doesn't work please contact me :)
pthreads should be available anywhere. Even if not, for environment
without threads a pthread wrapper could be provided that can't actually
start threads, thus disabling features that require threads.
Make pthreads mandatory in order to simplify build dependencies and to
reduce ifdeffery. (Admittedly, there wasn't much complexity, but maybe
we will use pthreads more in the future, and then it'd become a real
bother.)
Incidentally this seems wrong in the configure as well because only gl-win32
depends on it instead of also making direct3d depend on this (as I did here).
waf wrongly installs resources to BundleRoot/Resources instead of
BundleRoot/Contents/Resources. Will post a patch to them later. Either way,
this must worked around until the next waf patch release.
This commit adds a new build system based on waf. configure and Makefile
are deprecated effective immediately and someday in the future they will be
removed (they are still available by running ./old-configure).
You can find how the choice for waf came to be in `DOCS/waf-buildsystem.rst`.
TL;DR: we couldn't get the same level of abstraction and customization with
other build systems we tried (CMake and autotools).
For guidance on how to build the software now, take a look at README.md
and the cross compilation guide.
CREDITS:
This is a squash of ~250 commits. Some of them are not by me, so here is the
deserved attribution:
- @wm4 contributed some Windows fixes, renamed configure to old-configure
and contributed to the bootstrap script. Also, GNU/Linux testing.
- @lachs0r contributed some Windows fixes and the bootstrap script.
- @Nikoli contributed a lot of testing and discovered many bugs.
- @CrimsonVoid contributed changes to the bootstrap script.
