This was used with --no-sub-ass (aka --no-ass). This option (which is
not yet removed) strips all styling from the subtitles, and renders them
as plaintext only. For some reason, it originally seemed convenient to
reuse all the OSD text rendering code (osd_libass.c). While this was
indeed simple, it had a bad influence on the rest of the code. For
example, it had to decide whether to go through the OSD code path, or
the proper subtitle renderer in sd_ass.c.
Kill the OSD subtitle renderer. Reimplement --no-sub-ass and also
"secondary" subtitles in sd_ass.c. fill_plaintext() contains some rather
minor code duplication with osd_libass.c for setting up a dummy
ASS_Event and escaping the stripped text. Since sd_ass.c already has to
handle "normal" text subtitles, and has code for stripping ASS tags,
this remains all relatively simple.
Remove all the unnecessary crap from the rest of the code.
Use the demux_set_ts_offset() added in the previous commit to base each
timeline segment to use timestamps according to its relative position
within the overall timeline. As a consequence we don't need to care
about these timestamps anymore, and everything becomes simpler.
(Another minor but delicious nugget of sanity.)
Most of this is explained in the DOCS additions.
This gives us slightly more sanity, because there is less interaction
between the various parts. The goal is getting rid of the video_offset
entirely.
The simplification extends to the user API. In particular, we don't need
to fix missing parts in the API, such as the lack for a seek command
that seeks relatively to the start time. All these things are now
transparent.
(If someone really wants to know the real timestamps/start time, new
properties would have to be added.)
Something goes wrong somewhere. Don't bother, it's only needed for
compatibility with our absolute baseline (GL 2.1/GLES 2).
On the other hand, we can process nv12 formats just fine.
For the sake of vaapi interop, we want to use EGL, but on the other
hand, but because driver developers are full of shit, vdpau interop will
not work on EGL (even if the driver supports EGL). The latter happens
with both nvidia and AMD Mesa drivers.
Additionally, EGL vaapi interop support can apparently only detected at
runtime by actually using it. While hwdec_vaegl.c already does this, it
would require initializing libva on _every_ system, which will cause
libav to print an unpreventable bullshit message to the terminal.
Try to counter these huge loads of bullshit by adding more fucking
bullshit.
We want the following behavior:
- VO probed, backend probed: only accept non-sw, fail completely
otherwise
- VO forced, backend probed: use the first non-sw, or if none is found,
fall back to the first working sw backend
- VO probed, backend forced: (I don't care about this case)
- VO forced, backend forced: just use that backend
Also, on backend probe failure the vo->probed field was left in its old
state.
This adds support for the progress indicator taskbar extension
that was introduced with Windows 7 and Windows Server 2008 R2.
I don’t like this solution because it keeps its own state and
introduces another VOCTRL, but I couldn’t come up with anything
less messy.
closes#2399
In the display-sync, non-interpolation case, and if the display refresh
rate is higher than the video framerate, we duplicate display frames by
rendering exactly the same screen again. The redrawing is cached with a
FBO to speed up the repeat.
Use glBlitFramebuffer() instead of another shader pass. It should be
faster.
For some reason, post-process was run again on each display refresh.
Stop doing this, which should also be slightly faster. The only
disadvantage is that temporal dithering will be run only once per video
frame, but I can live with this.
One aspect is messy: clearing the background is done at the start on the
target framebuffer, so to avoid clearing twice and duplicating the code,
only copy the part of the framebuffer that contains the rendered video.
(Which also gets slightly messy - needs to compensate for coordinate
system flipping.)
Currently, vo.c will always continue to render the currently queued
frame, which sets last_flip, which in turn confuses vo_get_delay(),
which in turn will show a bogus A/V desync message on unpause. So just
reset it again on unpause.
I guess the removed code is an old leftover, and makes no sense anymore.
Should fix weird A/V diff dropouts when frames are being dropped with
display-sync.
If the player sends a frame with duration==0 to the VO, it can trivially
underrun. Don't panic, but keep the correct time.
Also, returning the absolute time from vo_get_next_frame_start_time()
just to turn it into a float with relative time was silly. Rename it and
make it return what the caller needs.
80ms allowable desync was a bit too much. It'd allow for a range of
160ms, which everyone can notice. It might also be a bother to apply
compensation resampling speed for that long.
We always let audio slowly desync until a threshold is reached, and then
pushed it back by applying a maximum compensation speed. Refine what
comes afterwards: instead of playing with the nominal video speed, use
the actual required audio speed for keeping sync as measured by the A/V
difference. (The "actual" speed is the ideal speed with A/V differences
added.)
Although this works in theory, it's somewhat questionable how much this
works in practice. The ideal time value is actually not exact, but is
the time at which the frame is scheduled (could be compensated by using
the time_left calculations in handle_display_sync_frame()). It doesn't
account for speed changes or catastrophic discontinuities. It uses only
10 past frames.
As long as it's within the desync tolerance, do not change the audio
speed at all for resampling. This reduces speed changes which might be
caused by jittering timestamps and similar cases.
(While in theory you could just not care and change speed every single
frame, I'm afraid that such changes could possibly cause audio
artifacts. So better just avoid it in the first place.)
This is very "illustrative", unlike the video-speed-correction
property, and thus useful. It can also be used to observe scheduling
errors, which are not detected by the core. (These happen due to
rounding errors; possibly not evne our fault, but coming from
files with rounded timestamps and so on.)
Instead of looking at the current frame duration for the intended
speedup, look at all past frames, and find a good average speed. This
ties in with not wanting to average _all_ frame durations, which
doesn't make sense in VFR situations.
This is currently done in the most naive way possible, but already sort
of works for VFR which switches between frame durations that are
integer multiples of a base rate. Certainly more improvements could
be made, such as trying to adjust directly on FPS changes, instead of
averaging everything, but for now this is not needed at all.
Helps somewhat with muxer-rounded timestamps.
There is some danger that this introduces a timestamp drift. But since
they are averaged values (unlike as when using an incorrect container
framerate hint), any potential drift shouldn't be too brutal, or
compensate itself soon. So I won't bother yet with comparing the results
with the real timestamp, unless we run into actual problems.
Of course we still prefer potentially real timestamps over the
approximated ones. But unless the timestamps match the container FPS,
we can't know whether they are (no, checking whether the they have
microsecond components would be cheating). Perhaps in future, we could
let the demuxer export the timebase - if the timebase is not 1000 (or
divisible by it), we know that millisecond-rounded timestamps won't
happen.
Get rid of get_past_frame_durations(), which was a bit too messy. Add
a past_frames array, which contains the same information in a more
reasonable way. This also means that we can get the exact current and
past frame durations without going through awful stuff. (The main
problem is that vo_pts_history contains future frames as well, which is
needed for frame backstepping etc., but gets in the way here.)
Also disable the automatic disabling of display-sync if the frame
duration changes, and extend the frame durations allowed for display
sync. To allow arbitrarily high durations, vo.c needs to be changed
to pause and potentially redraw OSD while showing a single frame, so
they're still limited.
In an attempt to deal with VFR, calculate the overall speed using the
average FPS. The frame scheduling itself does not use the average FPS,
but the duration of the current frame. This does not work too well,
but provides a good base for further improvements.
Where this commit actually helps a lot is dealing with rounded
timestamps, e.g. if the container framerate is wrong or unknown, or
if the muxer wrote incorrectly rounded timestamps. While the rounding
errors apparently can't be get rid of completely in the general case,
this is still much better than e.g. disabling display-sync completely
just because some frame durations go out of bounds.
We need a frame duration even on start, because the number of vsyncs
the frame is shown is predetermined. (vo_opengl actually makes use of
this property in certain cases.)
"Missed" implies the frame was dropped, but what really happens is that
the following frame will be shown later than intended (due to the
current frame skipping a vsync).
(As of this commit, this property is still inactive and always
returns 0. See git blame for details.)
Apparently Windows treats windows that use OpenGL, cover an entire
screen and have the WS_POPUP style set or are topmost windows as
exclusive fullscreen windows that bypass DWM and cannot be covered
by other windows.
This means we can’t use dwmflush in fullscreen mode, and it also
means that no other window can cover mpv, and it makes the screen
flicker when switching to fullscreen mode.
This can be avoided by not setting the WS_POPUP flag.
Users can still access the old behavior by enabling stay-on-top
(which IMO at least makes sense—now we just need to get dwmflush
autodetection right to avoid nasty surprises).
fixes#2177
This loaded external .ass files via libass. libavformat's .ass reader is
now good enough, so use that instead.
Apparently libavformat still doesn't support fonts embedded into text
.ass files, but support for this has been accidentally broken in mpv for
a while anyway. (And only 1 person complained.)
Just set the ratio directly by working around the intended semantics of
the API function. The silly rounding stuff we had isn't needed anymore
(and not entirely correct anyway).
Note that since the compensation is virtually active forever, we need to
reset if it's not needed. So always run this code to be sure to reset
it.
Also note that libswresample itself had a precision issue, until it
was fixed in FFmpeg commit 351e625d.
When the audio format is not known yet and the audio chain is still
initializing, filter reinit will fail. Normally, attempts to
reinitialize filters at this stage should be rare (e.g. user commands
editing the filter chain). But it sometimes happened with track
switching in combination with the video code calling
update_playback_speed() at arbitrary times.
Get rid of the message by not trying to change the filters for the sake
of playback speed update while decoding is still being initialized.
Until now, we've relied on the following things:
- you can send flush packets to the decoder even if it's fully flushed,
- you can send new packets to a flushed decoder,
- you can send new packers to a partially flushed decoder.
("flushing" refers to sending flush packets to the decoder until the
decoder does not return new pictures, not avcodec_flush_buffers().)
All of these are questionable. The libavcodec API probably doesn't
guarantee that these work well or at all, even though most decoders have
no issue with these. But especially with hardware decoding wrappers
(like MMAL), real problems can be expected. Isolate us from these corner
cases by handling them explicitly.
This applies to unexpected freezes or deadlocks, not e.g. normal
framedrops. The verbose messages also might remind an API user if the
API usage is incorrect, such as not calling mpv_opengl_cb_draw() when a
redraw request was issued.
This commit introduces logic to read other volumes from the same source
as the primary archive. Both .rar formats as well as 7z are supported for now.
It also changes the libarchive callback structure to be per-volume
consistent with the libarchive intenal client data array constructed
with archive_read_append_callback_data.
Added open, close and switch callbacks. Only the latter is strictly
required to make sure that the streams always start at position 0, but
leaving all volumes open can eat a lot of memory for archives with many
parts.
The nnedi3 prescaler requires a normalized range to work properly,
but the original implementation did the range normalization after
the first step of the first pass. This could lead to severe quality
degradation when debanding is not enabled for NNEDI3.
Fix this issue by passing `tex_mul` into the shader code.
Fixes#2464
vo_opengl_cb is a special case, because we somehow have to render video
asynchronously, all while "trusting" the API user to do it correctly.
This didn't quite work, and a while ago a compromise using a timeout to
prevent theoretically possible deadlocks was added.
Make it even more synchronous. Basically, go all the way, and
synchronize rendering between VO and user renderer thread to the
full extent possible.
This means the silly frame queue is dropped, and we event attempt to
synchronize the GL SwapBuffer call (via mpv_opengl_cb_report_flip()).
The changes introduced with commit dc33eb56 are effectively dropped. I
don't even remember if they mattered.
In the future, we might make all VOs fetch asynchronously from a frame
queue, which would mostly remove the differences between vo_opengl and
vo_opengl_cb, but this will take a while (if it will even be done).
Pick the correct GLSL version from the GL_SHADING_LANGUAGE_VERSION
string. Might be somewhat questionable, as we expect the minor version
number not to have leading 0s.
Should help with cases when the reported GLSL version is much higher
than the equivalent of the reported GL version. This problem was
observed in combination with GL_ARB_uniform_buffer_object, which
can't be used if the declared GLSL version is too low.
Has the same function as setting the option.
This commit changes the property in a bunch of other ways. For example
if the VO is not created, it will return the option value.
