There are lots of files that don't need it: The number of object
files that actually need it went down from 2011 to 884 here.
Keep it for external users in order to not cause breakages.
Also improve the other headers a bit while just at it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Due to the bump it is now certain that all devices
that support flushing have the proper internal flag set.
(Notice that the check for LIBAVFORMAT_VERSION was wrong.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
AVOutputFormat has default codecs for audio, video and subtitle
and often these are the only codecs of this type allowed.
So add a flag to AVOutputFormat so that this can be checked generically.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
More exactly: Not more than one stream of each type for which
a default codec (i.e. AVOutputFormat.(audio|video|subtitle)_codec)
is set; for those types for which no such codec is set (or for
which no designated default codec in AVOutputFormat exists at all)
no streams are permitted.
Given that with this flag set the default codecs become more important,
they are now set explicitly to AV_CODEC_ID_NONE for "unset";
the earlier code relied on AV_CODEC_ID_NONE being equal to zero,
so that default static initialization set it accordingly;
but this is not how one is supposed to use an enum.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is common for subtitle streams to have large gaps between packets.
When the caller is interleaving packets from multiple files, it can
easily happen that two successive subtitle packets trigger this limit,
even though no excessive buffering is happening.
Should fix#7064
Deprecate AVStream.side_data and its helpers in favor of the AVStream's
codecpar.coded_side_data.
This will considerably simplify the propagation of global side data to decoders
and from encoders. Instead of having to do it inside packets, it will be
available during init().
Global and frame specific side data will therefore be distinct.
Signed-off-by: James Almer <jamrial@gmail.com>
It is of no value to the user, because every muxer can always
be flushed with a NULL packet. As its documentation shows
("If not set, the muxer will not receive a NULL packet in
the write_packet function") it is actually an internal flag
that has been publically exposed because there was no internal
flags field for output formats for a long time. But now there is
and so use it by replacing the public flag with a private one.
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It was added in cb114ed464 with the comment
"This will allow fixing several bugs with the -shortest option".
Since
* there is no explanation of what these bugs are
* libavformat is not the place to work around ffmpeg CLI bugs
* there is no indication that this feature is actually in use
deprecate it without replacement.
AVCodec is only ever used as an incomplete type (i.e. via a pointer
to an AVCodec) in avformat.h and it is not really part of the core
of avformat.h or libavformat; almost none of our internal users
make use of it (and none make use of hwcontext.h, which is implicitly
included). So switch to use struct AVCodec, but continue to include
codec.h for external users for compatibility.
Also, do the same for AVFrame and frame.h, which is implicitly included
by codec.h (via lavu/hwcontext.h).
Also, remove an unnecessary inclusion of <time.h>.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Current log messages talk about 'suitable' output formats. This is
confusing, because it suggests that some formats are suitable, while
others are not, which is not the case.
Also, suggest possible user actions when format cannot be guessed from a
filename.
Add the appropriate descriptors to the MPEG-TS demux and mux to
ensure that SMPTE 2038 VANC streams are properly preserved
when using codec copy (including adding the appropriate PMT
descriptors).
The focus of this patch is TS input to TS output. A separate
patch adds support for output of 2038 VANC over decklink SDI.
Thanks to Marton Balint for feedback to preserve ABI compatibility.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
This commit does for AVOutputFormat what commit
20f9727018 did for AVCodec:
It adds a new type FFOutputFormat, moves all the internals
of AVOutputFormat to it and adds a now reduced AVOutputFormat
as first member.
This does not affect/improve extensibility of both public
or private fields for muxers (it is still a mess due to lavd).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Fixes: signed integer overflow: 0 - -9223372036854775808 cannot be represented in type 'long int'
Fixes: fate-cover-art-aiff-id3v2-remux, fate-cover-art-mp3-id3v2-remux and fate-mov-cover-image
under ubsan.
Signed-off-by: James Almer <jamrial@gmail.com>
Matroska requires pts to be >= 0 with a slight exception:
It has a mechanism to deal with codec delay, i.e. with
the data added at the beginning that does not correspond
to actual input data and should be discarded by the player.
Only the audio actually intended to be output needs to have
a timestamp >= 0.
In order to avoid unnecessary timestamp shifting, this patch
allows muxers to inform the shifting code about this so that
it can take it into account.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Mediates between old-style (de)muxers and new-style callers. Will be
removed once all the (de)muxers are converted to the new API.
Signed-off-by: James Almer <jamrial@gmail.com>
Peeking into the muxing queue can improve the estimate of
the lowest timestamp needed for avoid_negative_ts in case
the lowest timestamp is in a packet other than the first packet
to be muxed.
This fixes tickets #4536 and #5784 as well as the output from
the matroska-avoid-negative-ts FATE-test.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
write_packet() has code to shift the packets timestamps
to make them nonnegative or even make them start at ts zero;
this code inspects every packet that is written and if a packet
with negative timestamp (whether this is dts or pts depends upon
another flag; basically: Matroska uses pts, everyone else dts)
is encountered, this is offset to make the timestamp zero.
All further packets will be offset accordingly (with the offset
converted according to the streams' timebases).
This is based around an assumption, namely that the timestamps
are indeed non-decreasing, so that the first packet with negative
timestamps is the first packet with timestamps. This assumption
is often fulfilled given that the default interleavement function
by default interleaves per dts; yet there are scenarios in which
it may not be fulfilled:
a) av_write_frame() instead of av_interleaved_write_frame() is used.
b) The audio_preload option is used.
c) When the timestamps that are made nonnegative/zero are pts
(i.e. with Matroska), because the packet with the smallest dts
is not necessarily the packet with the smallest pts.
d) Possibly with custom interleavement functions.
In these cases the relative sync of the first few packet(s) is offset
relative to the later packets. This contradicts the documentation
("When shifting is enabled, all output timestamps are shifted by
the same amount").
Therefore this commit changes this: As soon as the first packet
with valid timestamps is output, it is checked and recorded whether
the timestamps need to be shifted. Further packets are no longer
checked for needing to be offset; instead they are simply offset.
In the cases above this leads to packets with negative timestamps
(and the appropriate warnings) instead of desync. This will mostly
be fixed in the next commit.
This commit also factors handling the avoid_negative_ts stuff out
of write_packet() in order to be able to return immediately.
Tickets #4536 and #5784 as well as the matroska-avoid-negative-ts-test
are examples of c); as has been said, some timestamps are now negative,
yet the ref file update does not show it because ffmpeg.c sanitizes
the timestamps (-copyts disables it; ffprobe and mkvinfo also show
the original timestamps).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This assert is based upon the wrong assumption that
the noninterleaved codepath is never used; if it is used,
max_interleave_delta is irrelevant. It furthermore
ignores audio_preload.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, we had a PacketList structure which is actually
a PacketListEntry; a proper PacketList did not exist
and all the related functions just passed pointers to pointers
to the head and tail elements around. All these pointers were
actually consecutive elements of their containing structs,
i.e. the users already treated them as if they were a struct.
So add a proper PacketList struct and rename the current PacketList
to PacketListEntry; also make the functions use this structure
instead of the pair of pointers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This function is quite small (96B with GCC 11.2 on x64 Ubuntu 21.10
at -O3), making it more economical to duplicate it into libavformat
instead of exporting it as avpriv: Doing so saves 2x24B in .dynsim,
2x16B in .dynstr, 2x2B .gnu.version, 24B in .rela.plt, 16B in .plt,
16B in .plt.sec (if enabled), 4B .gnu.hash; besides the actual
duplicated code this also adds 2x8B .eh_frame_hdr and 24B .eh_frame.
In other words: Duplicating is neutral size-wise (it is also presumed
neutral for other systems). Given that it avoids the runtime
overhead of dynamic symbols, it is advantageouos to duplicate the
function.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This removes one of the last usages of sizeof(AVPacket)
in the generic muxing code.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For most check_bitstream() functions this just avoids having
to dereference s->streams[pkt->stream_index] themselves; but for
meta-muxers it will allow to forward the packet to stream with
a different stream_index (belonging to a different AVFormatContext)
without using a spare packet.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It avoids branches lateron and will allow to easily avoid the overhead
of the linked list currently in use in case there is only one stream.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The documentation of said packet ("Every user has to ensure that
this packet is blank after using it") perfectly fits how we use said
packet in the generic muxing code. Better than the documentation of pkt.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently the interleave_packet functions use a packet for
a new packet to be interleaved (may be NULL if there is none) and
a packet for output; said packet is always a stack packet in
interleaved_write_packet(). But all the interleave_packet functions
in use first move the packet to the packet list and then check whether
a packet can be returned, i.e. the effective lifetime of the new packet
ends before the packet for output is touched.
So one can use one packet both for input and output by adding a new
parameter that indicates whether there is a packet to add to the packet
list; there is just one complication: In case the muxer is flushed,
there is no packet available. This can be solved by reusing one of
the packets from AVFormatInternal. They are currently unused when
flushing in av_interleaved_write_frame().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The BSF API treats such packets as signalling EOF and therefore
such a packet might corrupt the BSF state. In such a case,
the guarantee that av_interleaved_write_frame() always frees
the packet is not upheld.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Do this by allocating AVStream together with the data that is
currently in AVStreamInternal; or rather: Put AVStream at the
beginning of a new structure called FFStream (which encompasses
more than just the internal fields and is a proper context in its own
right, hence the name) and remove AVStreamInternal altogether.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This gets rid of ugly "->internal" and is in preparation for removing
AVStreamInternal altogether.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Do this by allocating AVFormatContext together with the data that is
currently in AVFormatInternal; or rather: Put AVFormatContext at the
beginning of a new structure called FFFormatContext (which encompasses
more than just the internal fields and is a proper context in its own
right, hence the name) and remove AVFormatInternal altogether.
The biggest simplifications occured in avformat_alloc_context(), where
one can now simply call avformat_free_context() in case of errors.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This gets rid of ugly "->internal" and is in preparation for removing
AVFormatInternal altogether.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Andreas Rheinhardt