Use binary prefixes for size and rate units

Includes adding support for additional size input suffix Mi and MiB, treated equivalent to M. Extends binary suffix output with letter i, e.g. Ki and Mi. Centralizes creation of bit/byte unit strings.
2024-11-20 21:27:33 +01:00 · 2021-03-02 20:11:57 +01:00 · 2021-03-02 20:11:57 +01:00 · 2925e1384c
commit 2925e1384c
parent 2ec0c8d45f
62 changed files with 2614 additions and 281 deletions
--- a/backend/amazonclouddrive/amazonclouddrive.go
+++ b/backend/amazonclouddrive/amazonclouddrive.go
@ -83,16 +83,16 @@ func init() {
 			Advanced: true,
 		}, {
 			Name: "upload_wait_per_gb",
-			Help: `Additional time per GB to wait after a failed complete upload to see if it appears.
+			Help: `Additional time per GiB to wait after a failed complete upload to see if it appears.

 Sometimes Amazon Drive gives an error when a file has been fully
 uploaded but the file appears anyway after a little while.  This
-happens sometimes for files over 1GB in size and nearly every time for
-files bigger than 10GB. This parameter controls the time rclone waits
+happens sometimes for files over 1 GiB in size and nearly every time for
+files bigger than 10 GiB. This parameter controls the time rclone waits
 for the file to appear.

-The default value for this parameter is 3 minutes per GB, so by
-default it will wait 3 minutes for every GB uploaded to see if the
+The default value for this parameter is 3 minutes per GiB, so by
+default it will wait 3 minutes for every GiB uploaded to see if the
 file appears.

 You can disable this feature by setting it to 0. This may cause
@ -112,7 +112,7 @@ in this situation.`,

 Files this size or more will be downloaded via their "tempLink". This
 is to work around a problem with Amazon Drive which blocks downloads
-of files bigger than about 10GB.  The default for this is 9GB which
+of files bigger than about 10 GiB. The default for this is 9 GiB which
 shouldn't need to be changed.

 To download files above this threshold, rclone requests a "tempLink"
--- a/backend/azureblob/azureblob.go
+++ b/backend/azureblob/azureblob.go
@ -47,8 +47,8 @@ const (
 	timeFormatIn          = time.RFC3339
 	timeFormatOut         = "2006-01-02T15:04:05.000000000Z07:00"
 	storageDefaultBaseURL = "blob.core.windows.net"
-	defaultChunkSize      = 4 * fs.MebiByte
-	maxChunkSize          = 100 * fs.MebiByte
+	defaultChunkSize      = 4 * fs.Mebi
+	maxChunkSize          = 100 * fs.Mebi
 	uploadConcurrency     = 4
 	defaultAccessTier     = azblob.AccessTierNone
 	maxTryTimeout         = time.Hour * 24 * 365 //max time of an azure web request response window (whether or not data is flowing)
@ -129,11 +129,11 @@ msi_client_id, or msi_mi_res_id parameters.`,
 			Advanced: true,
 		}, {
 			Name:     "upload_cutoff",
-			Help:     "Cutoff for switching to chunked upload (<= 256MB). (Deprecated)",
+			Help:     "Cutoff for switching to chunked upload (<= 256 MiB). (Deprecated)",
 			Advanced: true,
 		}, {
 			Name: "chunk_size",
-			Help: `Upload chunk size (<= 100MB).
+			Help: `Upload chunk size (<= 100 MiB).

 Note that this is stored in memory and there may be up to
 "--transfers" chunks stored at once in memory.`,
@ -404,7 +404,7 @@ func (f *Fs) shouldRetry(ctx context.Context, err error) (bool, error) {
 }

 func checkUploadChunkSize(cs fs.SizeSuffix) error {
-	const minChunkSize = fs.Byte
+	const minChunkSize = fs.SizeSuffixBase
 	if cs < minChunkSize {
 		return errors.Errorf("%s is less than %s", cs, minChunkSize)
 	}
--- a/backend/b2/b2.go
+++ b/backend/b2/b2.go
@ -54,10 +54,10 @@ const (
 	decayConstant       = 1 // bigger for slower decay, exponential
 	maxParts            = 10000
 	maxVersions         = 100 // maximum number of versions we search in --b2-versions mode
-	minChunkSize        = 5 * fs.MebiByte
-	defaultChunkSize    = 96 * fs.MebiByte
-	defaultUploadCutoff = 200 * fs.MebiByte
-	largeFileCopyCutoff = 4 * fs.GibiByte          // 5E9 is the max
+	minChunkSize        = 5 * fs.Mebi
+	defaultChunkSize    = 96 * fs.Mebi
+	defaultUploadCutoff = 200 * fs.Mebi
+	largeFileCopyCutoff = 4 * fs.Gibi              // 5E9 is the max
 	memoryPoolFlushTime = fs.Duration(time.Minute) // flush the cached buffers after this long
 	memoryPoolUseMmap   = false
 )
@ -116,7 +116,7 @@ in the [b2 integrations checklist](https://www.backblaze.com/b2/docs/integration

 Files above this size will be uploaded in chunks of "--b2-chunk-size".

-This value should be set no larger than 4.657GiB (== 5GB).`,
+This value should be set no larger than 4.657 GiB (== 5 GB).`,
 			Default:  defaultUploadCutoff,
 			Advanced: true,
 		}, {
@ -126,7 +126,7 @@ This value should be set no larger than 4.657GiB (== 5GB).`,
 Any files larger than this that need to be server-side copied will be
 copied in chunks of this size.

-The minimum is 0 and the maximum is 4.6GB.`,
+The minimum is 0 and the maximum is 4.6 GiB.`,
 			Default:  largeFileCopyCutoff,
 			Advanced: true,
 		}, {
--- a/backend/b2/upload.go
+++ b/backend/b2/upload.go
@ -230,14 +230,14 @@ func (up *largeUpload) transferChunk(ctx context.Context, part int64, body []byt
 		//
 		// The number of bytes in the file being uploaded. Note that
 		// this header is required; you cannot leave it out and just
-		// use chunked encoding.  The minimum size of every part but
-		// the last one is 100MB.
+		// use chunked encoding. The minimum size of every part but
+		// the last one is 100 MB (100,000,000 bytes)
 		//
 		// X-Bz-Content-Sha1
 		//
 		// The SHA1 checksum of the this part of the file. B2 will
 		// check this when the part is uploaded, to make sure that the
-		// data arrived correctly.  The same SHA1 checksum must be
+		// data arrived correctly. The same SHA1 checksum must be
 		// passed to b2_finish_large_file.
 		opts := rest.Opts{
 			Method:  "POST",
--- a/backend/box/box.go
+++ b/backend/box/box.go
@ -126,7 +126,7 @@ func init() {
 			}},
 		}, {
 			Name:     "upload_cutoff",
-			Help:     "Cutoff for switching to multipart upload (>= 50MB).",
+			Help:     "Cutoff for switching to multipart upload (>= 50 MiB).",
 			Default:  fs.SizeSuffix(defaultUploadCutoff),
 			Advanced: true,
 		}, {
@ -1286,7 +1286,7 @@ func (o *Object) Open(ctx context.Context, options ...fs.OpenOption) (in io.Read

 // upload does a single non-multipart upload
 //
-// This is recommended for less than 50 MB of content
+// This is recommended for less than 50 MiB of content
 func (o *Object) upload(ctx context.Context, in io.Reader, leaf, directoryID string, modTime time.Time, options ...fs.OpenOption) (err error) {
 	upload := api.UploadFile{
 		Name:              o.fs.opt.Enc.FromStandardName(leaf),
--- a/backend/cache/cache.go
+++ b/backend/cache/cache.go
@ -98,14 +98,14 @@ changed, any downloaded chunks will be invalid and cache-chunk-path
 will need to be cleared or unexpected EOF errors will occur.`,
 			Default: DefCacheChunkSize,
 			Examples: []fs.OptionExample{{
-				Value: "1m",
-				Help:  "1MB",
+				Value: "1M",
+				Help:  "1 MiB",
 			}, {
 				Value: "5M",
-				Help:  "5 MB",
+				Help:  "5 MiB",
 			}, {
 				Value: "10M",
-				Help:  "10 MB",
+				Help:  "10 MiB",
 			}},
 		}, {
 			Name: "info_age",
@ -132,13 +132,13 @@ oldest chunks until it goes under this value.`,
 			Default: DefCacheTotalChunkSize,
 			Examples: []fs.OptionExample{{
 				Value: "500M",
-				Help:  "500 MB",
+				Help:  "500 MiB",
 			}, {
 				Value: "1G",
-				Help:  "1 GB",
+				Help:  "1 GiB",
 			}, {
 				Value: "10G",
-				Help:  "10 GB",
+				Help:  "10 GiB",
 			}},
 		}, {
 			Name:     "db_path",
--- a/backend/chunker/chunker.go
+++ b/backend/chunker/chunker.go
@ -155,7 +155,7 @@ Normally should contain a ':' and a path, e.g. "myremote:path/to/dir",
 		}, {
 			Name:     "chunk_size",
 			Advanced: false,
-			Default:  fs.SizeSuffix(2147483648), // 2GB
+			Default:  fs.SizeSuffix(2147483648), // 2 GiB
 			Help:     `Files larger than chunk size will be split in chunks.`,
 		}, {
 			Name:     "name_format",
@ -1448,7 +1448,7 @@ func (c *chunkingReader) dummyRead(in io.Reader, size int64) error {
 		c.accountBytes(size)
 		return nil
 	}
-	const bufLen = 1048576 // 1MB
+	const bufLen = 1048576 // 1 MiB
 	buf := make([]byte, bufLen)
 	for size > 0 {
 		n := size
--- a/backend/chunker/chunker_internal_test.go
+++ b/backend/chunker/chunker_internal_test.go
@ -33,7 +33,7 @@ func testPutLarge(t *testing.T, f *Fs, kilobytes int) {
 		fstests.TestPutLarge(context.Background(), t, f, &fstest.Item{
 			ModTime: fstest.Time("2001-02-03T04:05:06.499999999Z"),
 			Path:    fmt.Sprintf("chunker-upload-%dk", kilobytes),
-			Size:    int64(kilobytes) * int64(fs.KibiByte),
+			Size:    int64(kilobytes) * int64(fs.Kibi),
 		})
 	})
 }
--- a/backend/compress/compress.go
+++ b/backend/compress/compress.go
@ -36,7 +36,7 @@ import (
 // Globals
 const (
 	initialChunkSize = 262144  // Initial and max sizes of chunks when reading parts of the file. Currently
-	maxChunkSize     = 8388608 // at 256KB and 8 MB.
+	maxChunkSize     = 8388608 // at 256 KiB and 8 MiB.

 	bufferSize          = 8388608
 	heuristicBytes      = 1048576
--- a/backend/drive/drive.go
+++ b/backend/drive/drive.go
@ -68,8 +68,8 @@ const (
 	defaultScope                = "drive"
 	// chunkSize is the size of the chunks created during a resumable upload and should be a power of two.
 	// 1<<18 is the minimum size supported by the Google uploader, and there is no maximum.
-	minChunkSize     = 256 * fs.KibiByte
-	defaultChunkSize = 8 * fs.MebiByte
+	minChunkSize     = 256 * fs.Kibi
+	defaultChunkSize = 8 * fs.Mebi
 	partialFields    = "id,name,size,md5Checksum,trashed,explicitlyTrashed,modifiedTime,createdTime,mimeType,parents,webViewLink,shortcutDetails,exportLinks"
 	listRGrouping    = 50   // number of IDs to search at once when using ListR
 	listRInputBuffer = 1000 // size of input buffer when using ListR
@ -467,7 +467,7 @@ See: https://github.com/rclone/rclone/issues/3631
 			Default: false,
 			Help: `Make upload limit errors be fatal

-At the time of writing it is only possible to upload 750GB of data to
+At the time of writing it is only possible to upload 750 GiB of data to
 Google Drive a day (this is an undocumented limit). When this limit is
 reached Google Drive produces a slightly different error message. When
 this flag is set it causes these errors to be fatal.  These will stop
@ -484,7 +484,7 @@ See: https://github.com/rclone/rclone/issues/3857
 			Default: false,
 			Help: `Make download limit errors be fatal

-At the time of writing it is only possible to download 10TB of data from
+At the time of writing it is only possible to download 10 TiB of data from
 Google Drive a day (this is an undocumented limit). When this limit is
 reached Google Drive produces a slightly different error message. When
 this flag is set it causes these errors to be fatal.  These will stop
--- a/backend/dropbox/dropbox.go
+++ b/backend/dropbox/dropbox.go
@ -65,9 +65,9 @@ const (
 	// Upload chunk size - setting too small makes uploads slow.
 	// Chunks are buffered into memory for retries.
 	//
-	// Speed vs chunk size uploading a 1 GB file on 2017-11-22
+	// Speed vs chunk size uploading a 1 GiB file on 2017-11-22
 	//
-	// Chunk Size MB, Speed Mbyte/s, % of max
+	// Chunk Size MiB, Speed MiByte/s, % of max
 	// 1	1.364	11%
 	// 2	2.443	19%
 	// 4	4.288	33%
@ -82,11 +82,11 @@ const (
 	// 96	12.302	95%
 	// 128	12.945	100%
 	//
-	// Choose 48MB which is 91% of Maximum speed.  rclone by
-	// default does 4 transfers so this should use 4*48MB = 192MB
+	// Choose 48 MiB which is 91% of Maximum speed.  rclone by
+	// default does 4 transfers so this should use 4*48 MiB = 192 MiB
 	// by default.
-	defaultChunkSize = 48 * fs.MebiByte
-	maxChunkSize     = 150 * fs.MebiByte
+	defaultChunkSize = 48 * fs.Mebi
+	maxChunkSize     = 150 * fs.Mebi
 	// Max length of filename parts: https://help.dropbox.com/installs-integrations/sync-uploads/files-not-syncing
 	maxFileNameLength = 255
 )
@ -164,7 +164,7 @@ Any files larger than this will be uploaded in chunks of this size.

 Note that chunks are buffered in memory (one at a time) so rclone can
 deal with retries.  Setting this larger will increase the speed
-slightly (at most 10%% for 128MB in tests) at the cost of using more
+slightly (at most 10%% for 128 MiB in tests) at the cost of using more
 memory.  It can be set smaller if you are tight on memory.`, maxChunkSize),
 			Default:  defaultChunkSize,
 			Advanced: true,
@ -325,7 +325,7 @@ func shouldRetry(ctx context.Context, err error) (bool, error) {
 }

 func checkUploadChunkSize(cs fs.SizeSuffix) error {
-	const minChunkSize = fs.Byte
+	const minChunkSize = fs.SizeSuffixBase
 	if cs < minChunkSize {
 		return errors.Errorf("%s is less than %s", cs, minChunkSize)
 	}
--- a/backend/koofr/koofr.go
+++ b/backend/koofr/koofr.go
@ -534,7 +534,7 @@ func (f *Fs) DirMove(ctx context.Context, src fs.Fs, srcRemote, dstRemote string
 	return nil
 }

-// About reports space usage (with a MB precision)
+// About reports space usage (with a MiB precision)
 func (f *Fs) About(ctx context.Context) (*fs.Usage, error) {
 	mount, err := f.client.MountsDetails(f.mountID)
 	if err != nil {
--- a/backend/onedrive/onedrive.go
+++ b/backend/onedrive/onedrive.go
@ -52,8 +52,8 @@ const (
 	driveTypePersonal           = "personal"
 	driveTypeBusiness           = "business"
 	driveTypeSharepoint         = "documentLibrary"
-	defaultChunkSize            = 10 * fs.MebiByte
-	chunkSizeMultiple           = 320 * fs.KibiByte
+	defaultChunkSize            = 10 * fs.Mebi
+	chunkSizeMultiple           = 320 * fs.Kibi

 	regionGlobal = "global"
 	regionUS     = "us"
@ -696,7 +696,7 @@ func errorHandler(resp *http.Response) error {
 }

 func checkUploadChunkSize(cs fs.SizeSuffix) error {
-	const minChunkSize = fs.Byte
+	const minChunkSize = fs.SizeSuffixBase
 	if cs%chunkSizeMultiple != 0 {
 		return errors.Errorf("%s is not a multiple of %s", cs, chunkSizeMultiple)
 	}
@ -1885,11 +1885,11 @@ func (o *Object) uploadMultipart(ctx context.Context, in io.Reader, size int64,
 	return info, nil
 }

-// Update the content of a remote file within 4MB size in one single request
+// Update the content of a remote file within 4 MiB size in one single request
 // This function will set modtime after uploading, which will create a new version for the remote file
 func (o *Object) uploadSinglepart(ctx context.Context, in io.Reader, size int64, modTime time.Time, options ...fs.OpenOption) (info *api.Item, err error) {
 	if size < 0 || size > int64(fs.SizeSuffix(4*1024*1024)) {
-		return nil, errors.New("size passed into uploadSinglepart must be >= 0 and <= 4MiB")
+		return nil, errors.New("size passed into uploadSinglepart must be >= 0 and <= 4 MiB")
 	}

 	fs.Debugf(o, "Starting singlepart upload")
--- a/backend/opendrive/opendrive.go
+++ b/backend/opendrive/opendrive.go
@ -88,7 +88,7 @@ func init() {

 Note that these chunks are buffered in memory so increasing them will
 increase memory use.`,
-			Default:  10 * fs.MebiByte,
+			Default:  10 * fs.Mebi,
 			Advanced: true,
 		}},
 	})
--- a/backend/putio/putio.go
+++ b/backend/putio/putio.go
@ -35,7 +35,7 @@ const (
 	minSleep                   = 10 * time.Millisecond
 	maxSleep                   = 2 * time.Second
 	decayConstant              = 2 // bigger for slower decay, exponential
-	defaultChunkSize           = 48 * fs.MebiByte
+	defaultChunkSize           = 48 * fs.Mebi
 )

 var (
--- a/backend/qingstor/qingstor.go
+++ b/backend/qingstor/qingstor.go
@ -80,7 +80,7 @@ func init() {
 			Help: `Cutoff for switching to chunked upload

 Any files larger than this will be uploaded in chunks of chunk_size.
-The minimum is 0 and the maximum is 5GB.`,
+The minimum is 0 and the maximum is 5 GiB.`,
 			Default:  defaultUploadCutoff,
 			Advanced: true,
 		}, {
--- a/backend/s3/s3.go
+++ b/backend/s3/s3.go
@ -1016,7 +1016,7 @@ If you leave it blank, this is calculated automatically from the sse_customer_ke
 			Help: `Cutoff for switching to chunked upload

 Any files larger than this will be uploaded in chunks of chunk_size.
-The minimum is 0 and the maximum is 5GB.`,
+The minimum is 0 and the maximum is 5 GiB.`,
 			Default:  defaultUploadCutoff,
 			Advanced: true,
 		}, {
@ -1038,9 +1038,9 @@ Rclone will automatically increase the chunk size when uploading a
 large file of known size to stay below the 10,000 chunks limit.

 Files of unknown size are uploaded with the configured
-chunk_size. Since the default chunk size is 5MB and there can be at
+chunk_size. Since the default chunk size is 5 MiB and there can be at
 most 10,000 chunks, this means that by default the maximum size of
-a file you can stream upload is 48GB.  If you wish to stream upload
+a file you can stream upload is 48 GiB.  If you wish to stream upload
 larger files then you will need to increase chunk_size.`,
 			Default:  minChunkSize,
 			Advanced: true,
@ -1066,7 +1066,7 @@ large file of a known size to stay below this number of chunks limit.
 Any files larger than this that need to be server-side copied will be
 copied in chunks of this size.

-The minimum is 0 and the maximum is 5GB.`,
+The minimum is 0 and the maximum is 5 GiB.`,
 			Default:  fs.SizeSuffix(maxSizeForCopy),
 			Advanced: true,
 		}, {
@ -1270,7 +1270,7 @@ See: https://github.com/rclone/rclone/issues/4673, https://github.com/rclone/rcl
 const (
 	metaMtime   = "Mtime"     // the meta key to store mtime in - e.g. X-Amz-Meta-Mtime
 	metaMD5Hash = "Md5chksum" // the meta key to store md5hash in
-	// The maximum size of object we can COPY - this should be 5GiB but is < 5GB for b2 compatibility
+	// The maximum size of object we can COPY - this should be 5 GiB but is < 5 GB for b2 compatibility
 	// See https://forum.rclone.org/t/copying-files-within-a-b2-bucket/16680/76
 	maxSizeForCopy      = 4768 * 1024 * 1024
 	maxUploadParts      = 10000 // maximum allowed number of parts in a multi-part upload
@ -2991,9 +2991,9 @@ func (o *Object) uploadMultipart(ctx context.Context, req *s3.PutObjectInput, si
 	// calculate size of parts
 	partSize := int(f.opt.ChunkSize)

-	// size can be -1 here meaning we don't know the size of the incoming file.  We use ChunkSize
-	// buffers here (default 5MB). With a maximum number of parts (10,000) this will be a file of
-	// 48GB which seems like a not too unreasonable limit.
+	// size can be -1 here meaning we don't know the size of the incoming file. We use ChunkSize
+	// buffers here (default 5 MiB). With a maximum number of parts (10,000) this will be a file of
+	// 48 GiB which seems like a not too unreasonable limit.
 	if size == -1 {
 		warnStreamUpload.Do(func() {
 			fs.Logf(f, "Streaming uploads using chunk size %v will have maximum file size of %v",
@ -3002,7 +3002,7 @@ func (o *Object) uploadMultipart(ctx context.Context, req *s3.PutObjectInput, si
 	} else {
 		// Adjust partSize until the number of parts is small enough.
 		if size/int64(partSize) >= uploadParts {
-			// Calculate partition size rounded up to the nearest MB
+			// Calculate partition size rounded up to the nearest MiB
 			partSize = int((((size / uploadParts) >> 20) + 1) << 20)
 		}
 	}
--- a/backend/sharefile/sharefile.go
+++ b/backend/sharefile/sharefile.go
@ -110,10 +110,10 @@ const (
 	decayConstant               = 2              // bigger for slower decay, exponential
 	apiPath                     = "/sf/v3"       // add to endpoint to get API path
 	tokenPath                   = "/oauth/token" // add to endpoint to get Token path
-	minChunkSize                = 256 * fs.KibiByte
-	maxChunkSize                = 2 * fs.GibiByte
-	defaultChunkSize            = 64 * fs.MebiByte
-	defaultUploadCutoff         = 128 * fs.MebiByte
+	minChunkSize                = 256 * fs.Kibi
+	maxChunkSize                = 2 * fs.Gibi
+	defaultChunkSize            = 64 * fs.Mebi
+	defaultUploadCutoff         = 128 * fs.Mebi
 )

 // Generate a new oauth2 config which we will update when we know the TokenURL
--- a/backend/swift/swift.go
+++ b/backend/swift/swift.go
@ -36,7 +36,7 @@ import (
 const (
 	directoryMarkerContentType = "application/directory" // content type of directory marker objects
 	listChunks                 = 1000                    // chunk size to read directory listings
-	defaultChunkSize           = 5 * fs.GibiByte
+	defaultChunkSize           = 5 * fs.Gibi
 	minSleep                   = 10 * time.Millisecond // In case of error, start at 10ms sleep.
 )

@ -46,7 +46,7 @@ var SharedOptions = []fs.Option{{
 	Help: `Above this size files will be chunked into a _segments container.

 Above this size files will be chunked into a _segments container.  The
-default for this is 5GB which is its maximum value.`,
+default for this is 5 GiB which is its maximum value.`,
 	Default:  defaultChunkSize,
 	Advanced: true,
 }, {
@ -56,7 +56,7 @@ default for this is 5GB which is its maximum value.`,
 When doing streaming uploads (e.g. using rcat or mount) setting this
 flag will cause the swift backend to not upload chunked files.

-This will limit the maximum upload size to 5GB. However non chunked
+This will limit the maximum upload size to 5 GiB. However non chunked
 files are easier to deal with and have an MD5SUM.

 Rclone will still chunk files bigger than chunk_size when doing normal
@ -419,7 +419,7 @@ func swiftConnection(ctx context.Context, opt *Options, name string) (*swift.Con
 }

 func checkUploadChunkSize(cs fs.SizeSuffix) error {
-	const minChunkSize = fs.Byte
+	const minChunkSize = fs.SizeSuffixBase
 	if cs < minChunkSize {
 		return errors.Errorf("%s is less than %s", cs, minChunkSize)
 	}
--- a/backend/swift/swift_test.go
+++ b/backend/swift/swift_test.go
@ -87,7 +87,7 @@ func (f *Fs) testWithChunk(t *testing.T) {
 	preConfChunkSize := f.opt.ChunkSize
 	preConfChunk := f.opt.NoChunk
 	f.opt.NoChunk = false
-	f.opt.ChunkSize = 1024 * fs.Byte
+	f.opt.ChunkSize = 1024 * fs.SizeSuffixBase
 	defer func() {
 		//restore old config after test
 		f.opt.ChunkSize = preConfChunkSize
@ -117,7 +117,7 @@ func (f *Fs) testWithChunkFail(t *testing.T) {
 	preConfChunkSize := f.opt.ChunkSize
 	preConfChunk := f.opt.NoChunk
 	f.opt.NoChunk = false
-	f.opt.ChunkSize = 1024 * fs.Byte
+	f.opt.ChunkSize = 1024 * fs.SizeSuffixBase
 	segmentContainer := f.root + "_segments"
 	defer func() {
 		//restore config
@ -159,7 +159,7 @@ func (f *Fs) testCopyLargeObject(t *testing.T) {
 	preConfChunkSize := f.opt.ChunkSize
 	preConfChunk := f.opt.NoChunk
 	f.opt.NoChunk = false
-	f.opt.ChunkSize = 1024 * fs.Byte
+	f.opt.ChunkSize = 1024 * fs.SizeSuffixBase
 	defer func() {
 		//restore old config after test
 		f.opt.ChunkSize = preConfChunkSize
--- a/cmd/delete/delete.go
+++ b/cmd/delete/delete.go
@ -36,8 +36,8 @@ If you supply the |--rmdirs| flag, it will remove all empty directories along wi
 You can also use the separate command |rmdir| or |rmdirs| to
 delete empty directories only.

-For example, to delete all files bigger than 100MBytes, you may first want to check what
-would be deleted (use either):
+For example, to delete all files bigger than 100 MiB, you may first want to
+check what would be deleted (use either):

    rclone --min-size 100M lsl remote:path
    rclone --dry-run --min-size 100M delete remote:path
@ -46,8 +46,8 @@ Then proceed with the actual delete:

    rclone --min-size 100M delete remote:path

-That reads "delete everything with a minimum size of 100 MB", hence
-delete all files bigger than 100MBytes.
+That reads "delete everything with a minimum size of 100 MiB", hence
+delete all files bigger than 100 MiB.

 **Important**: Since this can cause data loss, test first with the
 |--dry-run| or the |--interactive|/|-i| flag.
--- a/cmd/mountlib/mount.go
+++ b/cmd/mountlib/mount.go
@ -206,9 +206,9 @@ When that happens, it is the user's responsibility to stop the mount manually.
 The size of the mounted file system will be set according to information retrieved
 from the remote, the same as returned by the [rclone about](https://rclone.org/commands/rclone_about/)
 command. Remotes with unlimited storage may report the used size only,
-then an additional 1PB of free space is assumed. If the remote does not
+then an additional 1 PiB of free space is assumed. If the remote does not
 [support](https://rclone.org/overview/#optional-features) the about feature
-at all, then 1PB is set as both the total and the free size.
+at all, then 1 PiB is set as both the total and the free size.

 **Note**: As of |rclone| 1.52.2, |rclone mount| now requires Go version 1.13
 or newer on some platforms depending on the underlying FUSE library in use.
--- a/cmd/ncdu/ncdu.go
+++ b/cmd/ncdu/ncdu.go
@ -385,9 +385,9 @@ func (u *UI) Draw() error {
 			}
 			if u.showDirAverageSize {
 				if averageSize > 0 {
-					extras += fmt.Sprintf("%8v ", fs.SizeSuffix(int64(averageSize)))
+					extras += fmt.Sprintf("%9v ", fs.SizeSuffix(int64(averageSize)))
 				} else {
-					extras += "         "
+					extras += "          "
 				}

 			}
@ -406,7 +406,7 @@ func (u *UI) Draw() error {
 				}
 				extras += "[" + graph[graphBars-bars:2*graphBars-bars] + "] "
 			}
-			Linef(0, y, w, fg, bg, ' ', "%c %8v %s%c%s%s", fileFlag, fs.SizeSuffix(size), extras, mark, path.Base(entry.Remote()), message)
+			Linef(0, y, w, fg, bg, ' ', "%c %9v %s%c%s%s", fileFlag, fs.SizeSuffix(size), extras, mark, path.Base(entry.Remote()), message)
 			y++
 		}
 	}
--- a/cmd/serve/httplib/serve/data/templates/index.html
+++ b/cmd/serve/httplib/serve/data/templates/index.html
@ -367,7 +367,7 @@ footer {
 				}
 			};
 			function readableFileSize(size) {
-				var units = ['B', 'KB', 'MB', 'GB', 'TB', 'PB', 'EB', 'ZB', 'YB'];
+				var units = ['B', 'KiB', 'MiB', 'GiB', 'TiB', 'PiB', 'EiB', 'ZiB', 'YiB'];
 				var i = 0;
 				while(size >= 1024) {
 					size /= 1024;
--- a/cmd/size/size.go
+++ b/cmd/size/size.go
@ -44,7 +44,7 @@ var commandDefinition = &cobra.Command{
 			}

 			fmt.Printf("Total objects: %d\n", results.Count)
-			fmt.Printf("Total size: %s (%d Bytes)\n", fs.SizeSuffix(results.Bytes).Unit("Bytes"), results.Bytes)
+			fmt.Printf("Total size: %s (%d bytes)\n", fs.SizeSuffix(results.Bytes).ByteUnit(), results.Bytes)

 			return nil
 		})
--- a/docs/content/amazonclouddrive.md
+++ b/docs/content/amazonclouddrive.md
@ -227,16 +227,16 @@ Checkpoint for internal polling (debug).

 #### --acd-upload-wait-per-gb

-Additional time per GB to wait after a failed complete upload to see if it appears.
+Additional time per GiB to wait after a failed complete upload to see if it appears.

 Sometimes Amazon Drive gives an error when a file has been fully
 uploaded but the file appears anyway after a little while.  This
-happens sometimes for files over 1GB in size and nearly every time for
-files bigger than 10GB. This parameter controls the time rclone waits
+happens sometimes for files over 1 GiB in size and nearly every time for
+files bigger than 10 GiB. This parameter controls the time rclone waits
 for the file to appear.

-The default value for this parameter is 3 minutes per GB, so by
-default it will wait 3 minutes for every GB uploaded to see if the
+The default value for this parameter is 3 minutes per GiB, so by
+default it will wait 3 minutes for every GiB uploaded to see if the
 file appears.

 You can disable this feature by setting it to 0. This may cause
@ -260,7 +260,7 @@ Files >= this size will be downloaded via their tempLink.

 Files this size or more will be downloaded via their "tempLink". This
 is to work around a problem with Amazon Drive which blocks downloads
-of files bigger than about 10GB.  The default for this is 9GB which
+of files bigger than about 10 GiB.  The default for this is 9 GiB which
 shouldn't need to be changed.

 To download files above this threshold, rclone requests a "tempLink"
@ -299,7 +299,7 @@ Amazon Drive has an internal limit of file sizes that can be uploaded
 to the service. This limit is not officially published, but all files
 larger than this will fail.

-At the time of writing (Jan 2016) is in the area of 50GB per file.
+At the time of writing (Jan 2016) is in the area of 50 GiB per file.
 This means that larger files are likely to fail.

 Unfortunately there is no way for rclone to see that this failure is
--- a/docs/content/azureblob.md
+++ b/docs/content/azureblob.md
@ -269,7 +269,7 @@ Leave blank normally.

 #### --azureblob-upload-cutoff

-Cutoff for switching to chunked upload (<= 256MB). (Deprecated)
+Cutoff for switching to chunked upload (<= 256 MiB). (Deprecated)

 - Config:      upload_cutoff
 - Env Var:     RCLONE_AZUREBLOB_UPLOAD_CUTOFF
@ -278,7 +278,7 @@ Cutoff for switching to chunked upload (<= 256MB). (Deprecated)

 #### --azureblob-chunk-size

-Upload chunk size (<= 100MB).
+Upload chunk size (<= 100 MiB).

 Note that this is stored in memory and there may be up to
 "--transfers" chunks stored at once in memory.
--- a/docs/content/b2.md
+++ b/docs/content/b2.md
@ -155,8 +155,8 @@ depending on your hardware, how big the files are, how much you want
 to load your computer, etc.  The default of `--transfers 4` is
 definitely too low for Backblaze B2 though.

-Note that uploading big files (bigger than 200 MB by default) will use
-a 96 MB RAM buffer by default.  There can be at most `--transfers` of
+Note that uploading big files (bigger than 200 MiB by default) will use
+a 96 MiB RAM buffer by default.  There can be at most `--transfers` of
 these in use at any moment, so this sets the upper limit on the memory
 used.

@ -401,7 +401,7 @@ Cutoff for switching to chunked upload.

 Files above this size will be uploaded in chunks of "--b2-chunk-size".

-This value should be set no larger than 4.657GiB (== 5GB).
+This value should be set no larger than 4.657 GiB (== 5 GB).

 - Config:      upload_cutoff
 - Env Var:     RCLONE_B2_UPLOAD_CUTOFF
@ -415,7 +415,7 @@ Cutoff for switching to multipart copy
 Any files larger than this that need to be server-side copied will be
 copied in chunks of this size.

-The minimum is 0 and the maximum is 4.6GB.
+The minimum is 0 and the maximum is 4.6 GiB.

 - Config:      copy_cutoff
 - Env Var:     RCLONE_B2_COPY_CUTOFF
--- a/docs/content/box.md
+++ b/docs/content/box.md
@ -225,10 +225,10 @@ as they can't be used in JSON strings.

 ### Transfers ###

-For files above 50MB rclone will use a chunked transfer.  Rclone will
+For files above 50 MiB rclone will use a chunked transfer.  Rclone will
 upload up to `--transfers` chunks at the same time (shared among all
 the multipart uploads).  Chunks are buffered in memory and are
-normally 8MB so increasing `--transfers` will increase memory use.
+normally 8 MiB so increasing `--transfers` will increase memory use.

 ### Deleting files ###

@ -369,7 +369,7 @@ Fill in for rclone to use a non root folder as its starting point.

 #### --box-upload-cutoff

-Cutoff for switching to multipart upload (>= 50MB).
+Cutoff for switching to multipart upload (>= 50 MiB).

 - Config:      upload_cutoff
 - Env Var:     RCLONE_BOX_UPLOAD_CUTOFF
--- a/docs/content/cache.md
+++ b/docs/content/cache.md
@ -70,11 +70,11 @@ password:
 The size of a chunk. Lower value good for slow connections but can affect seamless reading.
 Default: 5M
 Choose a number from below, or type in your own value
- 1 / 1MB
-   \ "1m"
- 2 / 5 MB
+ 1 / 1 MiB
+   \ "1M"
+ 2 / 5 MiB
   \ "5M"
- 3 / 10 MB
+ 3 / 10 MiB
   \ "10M"
 chunk_size> 2
 How much time should object info (file size, file hashes, etc.) be stored in cache. Use a very high value if you don't plan on changing the source FS from outside the cache.
@ -91,11 +91,11 @@ info_age> 2
 The maximum size of stored chunks. When the storage grows beyond this size, the oldest chunks will be deleted.
 Default: 10G
 Choose a number from below, or type in your own value
- 1 / 500 MB
+ 1 / 500 MiB
   \ "500M"
- 2 / 1 GB
+ 2 / 1 GiB
   \ "1G"
- 3 / 10 GB
+ 3 / 10 GiB
   \ "10G"
 chunk_total_size> 3
 Remote config
@ -364,11 +364,11 @@ will need to be cleared or unexpected EOF errors will occur.
 - Default:     5M
 - Examples:
    - "1m"
-        - 1MB
+        - 1 MiB
    - "5M"
-        - 5 MB
+        - 5 MiB
    - "10M"
-        - 10 MB
+        - 10 MiB

 #### --cache-info-age

@ -401,11 +401,11 @@ oldest chunks until it goes under this value.
 - Default:     10G
 - Examples:
    - "500M"
-        - 500 MB
+        - 500 MiB
    - "1G"
-        - 1 GB
+        - 1 GiB
    - "10G"
-        - 10 GB
+        - 10 GiB

 ### Advanced Options

--- a/docs/content/chunker.md
+++ b/docs/content/chunker.md
@ -43,7 +43,7 @@ Normally should contain a ':' and a path, e.g. "myremote:path/to/dir",
 Enter a string value. Press Enter for the default ("").
 remote> remote:path
 Files larger than chunk size will be split in chunks.
-Enter a size with suffix k,M,G,T. Press Enter for the default ("2G").
+Enter a size with suffix K,M,G,T. Press Enter for the default ("2G").
 chunk_size> 100M
 Choose how chunker handles hash sums. All modes but "none" require metadata.
 Enter a string value. Press Enter for the default ("md5").
--- a/docs/content/commands/rclone_delete.md
+++ b/docs/content/commands/rclone_delete.md
@ -23,7 +23,7 @@ If you supply the `--rmdirs` flag, it will remove all empty directories along wi
 You can also use the separate command `rmdir` or `rmdirs` to
 delete empty directories only.

-For example, to delete all files bigger than 100MBytes, you may first want to check what
+For example, to delete all files bigger than 100 MiByte, you may first want to check what
 would be deleted (use either):

    rclone --min-size 100M lsl remote:path
@ -33,8 +33,8 @@ Then proceed with the actual delete:

    rclone --min-size 100M delete remote:path

-That reads "delete everything with a minimum size of 100 MB", hence
-delete all files bigger than 100MBytes.
+That reads "delete everything with a minimum size of 100 MiB", hence
+delete all files bigger than 100 MiByte.

 **Important**: Since this can cause data loss, test first with the
 `--dry-run` or the `--interactive`/`-i` flag.
--- a/docs/content/commands/rclone_mount.md
+++ b/docs/content/commands/rclone_mount.md
@ -56,9 +56,9 @@ When that happens, it is the user's responsibility to stop the mount manually.
 The size of the mounted file system will be set according to information retrieved
 from the remote, the same as returned by the [rclone about](https://rclone.org/commands/rclone_about/)
 command. Remotes with unlimited storage may report the used size only,
-then an additional 1PB of free space is assumed. If the remote does not
+then an additional 1 PiB of free space is assumed. If the remote does not
 [support](https://rclone.org/overview/#optional-features) the about feature
-at all, then 1PB is set as both the total and the free size.
+at all, then 1 PiB is set as both the total and the free size.

 **Note**: As of `rclone` 1.52.2, `rclone mount` now requires Go version 1.13
 or newer on some platforms depending on the underlying FUSE library in use.
--- a/docs/content/crypt.md
+++ b/docs/content/crypt.md
@ -627,7 +627,7 @@ approximately 2×10⁻³² of re-using a nonce.

 #### Chunk

-Each chunk will contain 64kB of data, except for the last one which
+Each chunk will contain 64 KiB of data, except for the last one which
 may have less data. The data chunk is in standard NaCl SecretBox
 format. SecretBox uses XSalsa20 and Poly1305 to encrypt and
 authenticate messages.
@ -653,12 +653,12 @@ This uses a 32 byte (256 bit key) key derived from the user password.

 49 bytes total

-1MB (1048576 bytes) file will encrypt to
+1 MiB (1048576 bytes) file will encrypt to

  * 32 bytes header
  * 16 chunks of 65568 bytes

-1049120 bytes total (a 0.05% overhead).  This is the overhead for big
+1049120 bytes total (a 0.05% overhead). This is the overhead for big
 files.

 ### Name encryption
--- a/docs/content/docs.md
+++ b/docs/content/docs.md
@ -421,10 +421,10 @@ possibly signed sequence of decimal numbers, each with optional
 fraction and a unit suffix, such as "300ms", "-1.5h" or "2h45m". Valid
 time units are "ns", "us" (or "µs"), "ms", "s", "m", "h".

-Options which use SIZE use kByte by default.  However, a suffix of `b`
-for bytes, `k` for kByte, `M` for MByte, `G` for GByte, `T` for
-TByte and `P` for PByte may be used.  These are the binary units, e.g.
-1, 2\*\*10, 2\*\*20, 2\*\*30 respectively.
+Options which use SIZE use KiByte (multiples of 1024 bytes) by default.
+However, a suffix of `B` for Byte, `K` for KiByte, `M` for MiByte,
+`G` for GiByte, `T` for TiByte and `P` for PiByte may be used. These are
+the binary units, e.g. 1, 2\*\*10, 2\*\*20, 2\*\*30 respectively.

 ### --backup-dir=DIR ###

@ -467,23 +467,23 @@ This option controls the bandwidth limit. For example

    --bwlimit 10M
    
-would mean limit the upload and download bandwidth to 10 MByte/s.
+would mean limit the upload and download bandwidth to 10 MiByte/s.
 **NB** this is **bytes** per second not **bits** per second. To use a
-single limit, specify the desired bandwidth in kByte/s, or use a
-suffix b|k|M|G. The default is `0` which means to not limit bandwidth.
+single limit, specify the desired bandwidth in KiByte/s, or use a
+suffix B|K|M|G|T|P. The default is `0` which means to not limit bandwidth.

 The upload and download bandwidth can be specified seperately, as
 `--bwlimit UP:DOWN`, so

    --bwlimit 10M:100k

-would mean limit the upload bandwidth to 10 MByte/s and the download
-bandwidth to 100 kByte/s. Either limit can be "off" meaning no limit, so
+would mean limit the upload bandwidth to 10 MiByte/s and the download
+bandwidth to 100 KiByte/s. Either limit can be "off" meaning no limit, so
 to just limit the upload bandwidth you would use

    --bwlimit 10M:off

-this would limit the upload bandwidth to 10 MByte/s but the download
+this would limit the upload bandwidth to 10 MiByte/s but the download
 bandwidth would be unlimited.

 When specified as above the bandwidth limits last for the duration of
@ -505,19 +505,19 @@ working hours could be:

 `--bwlimit "08:00,512k 12:00,10M 13:00,512k 18:00,30M 23:00,off"`

-In this example, the transfer bandwidth will be set to 512 kByte/s
-at 8am every day. At noon, it will rise to 10 MByte/s, and drop back
-to 512 kByte/sec at 1pm. At 6pm, the bandwidth limit will be set to
-30 MByte/s, and at 11pm it will be completely disabled (full speed).
+In this example, the transfer bandwidth will be set to 512 KiByte/s
+at 8am every day. At noon, it will rise to 10 MiByte/s, and drop back
+to 512 KiByte/sec at 1pm. At 6pm, the bandwidth limit will be set to
+30 MiByte/s, and at 11pm it will be completely disabled (full speed).
 Anything between 11pm and 8am will remain unlimited.

 An example of timetable with `WEEKDAY` could be:

 `--bwlimit "Mon-00:00,512 Fri-23:59,10M Sat-10:00,1M Sun-20:00,off"`

-It means that, the transfer bandwidth will be set to 512 kByte/s on
-Monday. It will rise to 10 MByte/s before the end of Friday. At 10:00
-on Saturday it will be set to 1 MByte/s. From 20:00 on Sunday it will
+It means that, the transfer bandwidth will be set to 512 KiByte/s on
+Monday. It will rise to 10 MiByte/s before the end of Friday. At 10:00
+on Saturday it will be set to 1 MiByte/s. From 20:00 on Sunday it will
 be unlimited.

 Timeslots without `WEEKDAY` are extended to the whole week. So this
@ -536,7 +536,7 @@ being the non HTTP backends, `ftp`, `sftp` and `tardigrade`).
 Note that the units are **Byte/s**, not **bit/s**. Typically
 connections are measured in bit/s - to convert divide by 8. For
 example, let's say you have a 10 Mbit/s connection and you wish rclone
-to use half of it - 5 Mbit/s. This is 5/8 = 0.625 MByte/s so you would
+to use half of it - 5 Mbit/s. This is 5/8 = 0.625 MiByte/s so you would
 use a `--bwlimit 0.625M` parameter for rclone.

 On Unix systems (Linux, macOS, …) the bandwidth limiter can be toggled by
@ -557,7 +557,7 @@ change the bwlimit dynamically:
 This option controls per file bandwidth limit. For the options see the
 `--bwlimit` flag.

-For example use this to allow no transfers to be faster than 1 MByte/s
+For example use this to allow no transfers to be faster than 1 MiByte/s

    --bwlimit-file 1M

@ -770,7 +770,7 @@ which feature does what.

 This flag can be useful for debugging and in exceptional circumstances
 (e.g. Google Drive limiting the total volume of Server Side Copies to
-100GB/day).
+100 GiB/day).

 ### --dscp VALUE ###

@ -1047,7 +1047,7 @@ This is the maximum allowable backlog of files in a sync/copy/move
 queued for being checked or transferred.

 This can be set arbitrarily large.  It will only use memory when the
-queue is in use.  Note that it will use in the order of N kB of memory
+queue is in use.  Note that it will use in the order of N KiB of memory
 when the backlog is in use.

 Setting this large allows rclone to calculate how many files are
@ -1176,13 +1176,13 @@ size of the file. To calculate the number of download streams Rclone
 divides the size of the file by the `--multi-thread-cutoff` and rounds
 up, up to the maximum set with `--multi-thread-streams`.

-So if `--multi-thread-cutoff 250MB` and `--multi-thread-streams 4` are
+So if `--multi-thread-cutoff 250M` and `--multi-thread-streams 4` are
 in effect (the defaults):

- 0MB..250MB files will be downloaded with 1 stream
- 250MB..500MB files will be downloaded with 2 streams
- 500MB..750MB files will be downloaded with 3 streams
- 750MB+ files will be downloaded with 4 streams
+- 0..250 MiB files will be downloaded with 1 stream
+- 250..500 MiB files will be downloaded with 2 streams
+- 500..750 MiB files will be downloaded with 3 streams
+- 750+ MiB files will be downloaded with 4 streams

 ### --no-check-dest ###

--- a/docs/content/docs.md.orig
+++ b/docs/content/docs.md.orig
--- a/docs/content/drive.md
+++ b/docs/content/drive.md
@ -993,7 +993,7 @@ See: https://github.com/rclone/rclone/issues/3631

 Make upload limit errors be fatal

-At the time of writing it is only possible to upload 750GB of data to
+At the time of writing it is only possible to upload 750 GiB of data to
 Google Drive a day (this is an undocumented limit). When this limit is
 reached Google Drive produces a slightly different error message. When
 this flag is set it causes these errors to be fatal.  These will stop
@ -1014,7 +1014,7 @@ See: https://github.com/rclone/rclone/issues/3857

 Make download limit errors be fatal

-At the time of writing it is only possible to download 10TB of data from
+At the time of writing it is only possible to download 10 TiB of data from
 Google Drive a day (this is an undocumented limit). When this limit is
 reached Google Drive produces a slightly different error message. When
 this flag is set it causes these errors to be fatal.  These will stop
@ -1226,7 +1226,7 @@ Use the -i flag to see what would be copied before copying.

 Drive has quite a lot of rate limiting.  This causes rclone to be
 limited to transferring about 2 files per second only.  Individual
-files may be transferred much faster at 100s of MByte/s but lots of
+files may be transferred much faster at 100s of MiByte/s but lots of
 small files can take a long time.

 Server side copies are also subject to a separate rate limit. If you
--- a/docs/content/dropbox.md
+++ b/docs/content/dropbox.md
@ -185,7 +185,7 @@ Any files larger than this will be uploaded in chunks of this size.

 Note that chunks are buffered in memory (one at a time) so rclone can
 deal with retries.  Setting this larger will increase the speed
-slightly (at most 10% for 128MB in tests) at the cost of using more
+slightly (at most 10% for 128 MiB in tests) at the cost of using more
 memory.  It can be set smaller if you are tight on memory.

 - Config:      chunk_size
--- a/docs/content/filtering.md
+++ b/docs/content/filtering.md
@ -586,17 +586,17 @@ remote or flag value. The fix then is to quote values containing spaces.
 ### `--min-size` - Don't transfer any file smaller than this

 Controls the minimum size file within the scope of an rclone command.
-Default units are `kBytes` but abbreviations `k`, `M`, or `G` are valid.
+Default units are `KiByte` but abbreviations `K`, `M`, `G`, `T` or `P` are valid.

-E.g. `rclone ls remote: --min-size 50k` lists files on `remote:` of 50 kByte
+E.g. `rclone ls remote: --min-size 50k` lists files on `remote:` of 50 KiByte
 size or larger.

 ### `--max-size` - Don't transfer any file larger than this

 Controls the maximum size file within the scope of an rclone command.
-Default units are `kBytes` but abbreviations `k`, `M`, or `G` are valid.
+Default units are `KiByte` but abbreviations `K`, `M`, `G`, `T` or `P` are valid.

-E.g. `rclone ls remote: --max-size 1G` lists files on `remote:` of 1 GByte
+E.g. `rclone ls remote: --max-size 1G` lists files on `remote:` of 1 GiByte
 size or smaller.

 ### `--max-age` - Don't transfer any file older than this
@ -650,8 +650,8 @@ E.g. the scope of `rclone sync -i A: B:` can be restricted:

    rclone --min-size 50k --delete-excluded sync A: B:

-All files on `B:` which are less than 50 kBytes are deleted
-because they are excluded from the rclone sync command. 
+All files on `B:` which are less than 50 KiByte are deleted
+because they are excluded from the rclone sync command.

 ### `--dump filters` - dump the filters to the output

--- a/docs/content/flags.md
+++ b/docs/content/flags.md
@ -18,8 +18,8 @@ These flags are available for every command.
      --backup-dir string                    Make backups into hierarchy based in DIR.
      --bind string                          Local address to bind to for outgoing connections, IPv4, IPv6 or name.
      --buffer-size SizeSuffix               In memory buffer size when reading files for each --transfer. (default 16M)
-      --bwlimit BwTimetable                  Bandwidth limit in kByte/s, or use suffix b|k|M|G or a full timetable.
-      --bwlimit-file BwTimetable             Bandwidth limit per file in kByte/s, or use suffix b|k|M|G or a full timetable.
+      --bwlimit BwTimetable                  Bandwidth limit in KiByte/s, or use suffix B|K|M|G|T|P or a full timetable.
+      --bwlimit-file BwTimetable             Bandwidth limit per file in KiByte/s, or use suffix B|K|M|G|T|P or a full timetable.
      --ca-cert string                       CA certificate used to verify servers
      --cache-dir string                     Directory rclone will use for caching. (default "$HOME/.cache/rclone")
      --check-first                          Do all the checks before starting transfers.
@ -79,12 +79,12 @@ These flags are available for every command.
      --max-delete int                       When synchronizing, limit the number of deletes (default -1)
      --max-depth int                        If set limits the recursion depth to this. (default -1)
      --max-duration duration                Maximum duration rclone will transfer data for.
-      --max-size SizeSuffix                  Only transfer files smaller than this in k or suffix b|k|M|G (default off)
+      --max-size SizeSuffix                  Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
      --max-stats-groups int                 Maximum number of stats groups to keep in memory. On max oldest is discarded. (default 1000)
      --max-transfer SizeSuffix              Maximum size of data to transfer. (default off)
      --memprofile string                    Write memory profile to file
      --min-age Duration                     Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
-      --min-size SizeSuffix                  Only transfer files bigger than this in k or suffix b|k|M|G (default off)
+      --min-size SizeSuffix                  Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)
      --modify-window duration               Max time diff to be considered the same (default 1ns)
      --multi-thread-cutoff SizeSuffix       Use multi-thread downloads for files above this size. (default 250M)
      --multi-thread-streams int             Max number of streams to use for multi-thread downloads. (default 4)
@ -170,12 +170,12 @@ and may be set in the config file.
      --acd-templink-threshold SizeSuffix                        Files >= this size will be downloaded via their tempLink. (default 9G)
      --acd-token string                                         OAuth Access Token as a JSON blob.
      --acd-token-url string                                     Token server url.
-      --acd-upload-wait-per-gb Duration                          Additional time per GB to wait after a failed complete upload to see if it appears. (default 3m0s)
+      --acd-upload-wait-per-gb Duration                          Additional time per GiB to wait after a failed complete upload to see if it appears. (default 3m0s)
      --alias-remote string                                      Remote or path to alias.
      --azureblob-access-tier string                             Access tier of blob: hot, cool or archive.
      --azureblob-account string                                 Storage Account Name (leave blank to use SAS URL or Emulator)
      --azureblob-archive-tier-delete                            Delete archive tier blobs before overwriting.
-      --azureblob-chunk-size SizeSuffix                          Upload chunk size (<= 100MB). (default 4M)
+      --azureblob-chunk-size SizeSuffix                          Upload chunk size (<= 100 MiB). (default 4M)
      --azureblob-disable-checksum                               Don't store MD5 checksum with object metadata.
      --azureblob-encoding MultiEncoder                          This sets the encoding for the backend. (default Slash,BackSlash,Del,Ctl,RightPeriod,InvalidUtf8)
      --azureblob-endpoint string                                Endpoint for the service
@ -189,7 +189,7 @@ and may be set in the config file.
      --azureblob-public-access string                           Public access level of a container: blob, container.
      --azureblob-sas-url string                                 SAS URL for container level access only
      --azureblob-service-principal-file string                  Path to file containing credentials for use with a service principal.
-      --azureblob-upload-cutoff string                           Cutoff for switching to chunked upload (<= 256MB). (Deprecated)
+      --azureblob-upload-cutoff string                           Cutoff for switching to chunked upload (<= 256 MiB). (Deprecated)
      --azureblob-use-emulator                                   Uses local storage emulator if provided as 'true' (leave blank if using real azure storage endpoint)
      --azureblob-use-msi                                        Use a managed service identity to authenticate (only works in Azure)
      --b2-account string                                        Account ID or Application Key ID
@ -218,7 +218,7 @@ and may be set in the config file.
      --box-root-folder-id string                                Fill in for rclone to use a non root folder as its starting point.
      --box-token string                                         OAuth Access Token as a JSON blob.
      --box-token-url string                                     Token server url.
-      --box-upload-cutoff SizeSuffix                             Cutoff for switching to multipart upload (>= 50MB). (default 50M)
+      --box-upload-cutoff SizeSuffix                             Cutoff for switching to multipart upload (>= 50 MiB). (default 50M)
      --cache-chunk-clean-interval Duration                      How often should the cache perform cleanups of the chunk storage. (default 1m0s)
      --cache-chunk-no-memory                                    Disable the in-memory cache for storing chunks during streaming.
      --cache-chunk-path string                                  Directory to cache chunk files. (default "$HOME/.cache/rclone/cache-backend")
--- a/docs/content/hubic.md
+++ b/docs/content/hubic.md
@ -168,7 +168,7 @@ Leave blank to use the provider defaults.
 Above this size files will be chunked into a _segments container.

 Above this size files will be chunked into a _segments container.  The
-default for this is 5GB which is its maximum value.
+default for this is 5 GiB which is its maximum value.

 - Config:      chunk_size
 - Env Var:     RCLONE_HUBIC_CHUNK_SIZE
@ -182,7 +182,7 @@ Don't chunk files during streaming upload.
 When doing streaming uploads (e.g. using rcat or mount) setting this
 flag will cause the swift backend to not upload chunked files.

-This will limit the maximum upload size to 5GB. However non chunked
+This will limit the maximum upload size to 5 GiB. However non chunked
 files are easier to deal with and have an MD5SUM.

 Rclone will still chunk files bigger than chunk_size when doing normal
--- a/docs/content/onedrive.md
+++ b/docs/content/onedrive.md
@ -430,7 +430,7 @@ in it will be mapped to `？` instead.

 #### File sizes ####

-The largest allowed file size is 250GB for both OneDrive Personal and OneDrive for Business [(Updated 13 Jan 2021)](https://support.microsoft.com/en-us/office/invalid-file-names-and-file-types-in-onedrive-and-sharepoint-64883a5d-228e-48f5-b3d2-eb39e07630fa?ui=en-us&rs=en-us&ad=us#individualfilesize).
+The largest allowed file size is 250 GiB for both OneDrive Personal and OneDrive for Business [(Updated 13 Jan 2021)](https://support.microsoft.com/en-us/office/invalid-file-names-and-file-types-in-onedrive-and-sharepoint-64883a5d-228e-48f5-b3d2-eb39e07630fa?ui=en-us&rs=en-us&ad=us#individualfilesize).

 #### Path length ####

--- a/docs/content/overview.md
+++ b/docs/content/overview.md
@ -58,7 +58,7 @@ Here is an overview of the major features of each cloud storage system.

 ¹ Dropbox supports [its own custom
 hash](https://www.dropbox.com/developers/reference/content-hash).
-This is an SHA256 sum of all the 4MB block SHA256s.
+This is an SHA256 sum of all the 4 MiB block SHA256s.

 ² SFTP supports checksums if the same login has shell access and
 `md5sum` or `sha1sum` as well as `echo` are in the remote's PATH.
--- a/docs/content/qingstor.md
+++ b/docs/content/qingstor.md
@ -101,7 +101,7 @@ docs](/docs/#fast-list) for more details.
 ### Multipart uploads ###

 rclone supports multipart uploads with QingStor which means that it can
-upload files bigger than 5GB. Note that files uploaded with multipart
+upload files bigger than 5 GiB. Note that files uploaded with multipart
 upload don't have an MD5SUM.

 Note that incomplete multipart uploads older than 24 hours can be
@ -227,7 +227,7 @@ Number of connection retries.
 Cutoff for switching to chunked upload

 Any files larger than this will be uploaded in chunks of chunk_size.
-The minimum is 0 and the maximum is 5GB.
+The minimum is 0 and the maximum is 5 GiB.

 - Config:      upload_cutoff
 - Env Var:     RCLONE_QINGSTOR_UPLOAD_CUTOFF
--- a/docs/content/s3.md
+++ b/docs/content/s3.md
@ -327,7 +327,7 @@ objects). See the [rclone docs](/docs/#fast-list) for more details.

 `--fast-list` trades off API transactions for memory use. As a rough
 guide rclone uses 1k of memory per object stored, so using
-`--fast-list` on a sync of a million objects will use roughly 1 GB of
+`--fast-list` on a sync of a million objects will use roughly 1 GiB of
 RAM.

 If you are only copying a small number of files into a big repository
@ -407,13 +407,13 @@ work with the SDK properly:
 ### Multipart uploads ###

 rclone supports multipart uploads with S3 which means that it can
-upload files bigger than 5GB.
+upload files bigger than 5 GiB.

 Note that files uploaded *both* with multipart upload *and* through
 crypt remotes do not have MD5 sums.

 rclone switches from single part uploads to multipart uploads at the
-point specified by `--s3-upload-cutoff`.  This can be a maximum of 5GB
+point specified by `--s3-upload-cutoff`.  This can be a maximum of 5 GiB
 and a minimum of 0 (ie always upload multipart files).

 The chunk sizes used in the multipart upload are specified by
@ -1412,7 +1412,7 @@ If you leave it blank, this is calculated automatically from the sse_customer_ke
 Cutoff for switching to chunked upload

 Any files larger than this will be uploaded in chunks of chunk_size.
-The minimum is 0 and the maximum is 5GB.
+The minimum is 0 and the maximum is 5 GiB.

 - Config:      upload_cutoff
 - Env Var:     RCLONE_S3_UPLOAD_CUTOFF
@ -1438,9 +1438,9 @@ Rclone will automatically increase the chunk size when uploading a
 large file of known size to stay below the 10,000 chunks limit.

 Files of unknown size are uploaded with the configured
-chunk_size. Since the default chunk size is 5MB and there can be at
+chunk_size. Since the default chunk size is 5 MiB and there can be at
 most 10,000 chunks, this means that by default the maximum size of
-a file you can stream upload is 48GB.  If you wish to stream upload
+a file you can stream upload is 48 GiB.  If you wish to stream upload
 larger files then you will need to increase chunk_size.

 - Config:      chunk_size
@ -1474,7 +1474,7 @@ Cutoff for switching to multipart copy
 Any files larger than this that need to be server-side copied will be
 copied in chunks of this size.

-The minimum is 0 and the maximum is 5GB.
+The minimum is 0 and the maximum is 5 GiB.

 - Config:      copy_cutoff
 - Env Var:     RCLONE_S3_COPY_CUTOFF
--- a/docs/content/sharefile.md
+++ b/docs/content/sharefile.md
@ -112,10 +112,10 @@ flag.

 ### Transfers ###

-For files above 128MB rclone will use a chunked transfer.  Rclone will
+For files above 128 MiB rclone will use a chunked transfer.  Rclone will
 upload up to `--transfers` chunks at the same time (shared among all
 the multipart uploads).  Chunks are buffered in memory and are
-normally 64MB so increasing `--transfers` will increase memory use.
+normally 64 MiB so increasing `--transfers` will increase memory use.

 ### Limitations ###

--- a/docs/content/swift.md
+++ b/docs/content/swift.md
@ -444,7 +444,7 @@ If true avoid calling abort upload on a failure. It should be set to true for re
 Above this size files will be chunked into a _segments container.

 Above this size files will be chunked into a _segments container.  The
-default for this is 5GB which is its maximum value.
+default for this is 5 GiB which is its maximum value.

 - Config:      chunk_size
 - Env Var:     RCLONE_SWIFT_CHUNK_SIZE
@ -458,7 +458,7 @@ Don't chunk files during streaming upload.
 When doing streaming uploads (e.g. using rcat or mount) setting this
 flag will cause the swift backend to not upload chunked files.

-This will limit the maximum upload size to 5GB. However non chunked
+This will limit the maximum upload size to 5 GiB. However non chunked
 files are easier to deal with and have an MD5SUM.

 Rclone will still chunk files bigger than chunk_size when doing normal
--- a/docs/content/yandex.md
+++ b/docs/content/yandex.md
@ -114,15 +114,15 @@ as they can't be used in JSON strings.

 ### Limitations ###

-When uploading very large files (bigger than about 5GB) you will need
+When uploading very large files (bigger than about 5 GiB) you will need
 to increase the `--timeout` parameter.  This is because Yandex pauses
 (perhaps to calculate the MD5SUM for the entire file) before returning
 confirmation that the file has been uploaded.  The default handling of
 timeouts in rclone is to assume a 5 minute pause is an error and close
 the connection - you'll see `net/http: timeout awaiting response
 headers` errors in the logs if this is happening.  Setting the timeout
-to twice the max size of file in GB should be enough, so if you want
-to upload a 30GB file set a timeout of `2 * 30 = 60m`, that is
+to twice the max size of file in GiB should be enough, so if you want
+to upload a 30 GiB file set a timeout of `2 * 30 = 60m`, that is
 `--timeout 60m`.

 {{< rem autogenerated options start" - DO NOT EDIT - instead edit fs.RegInfo in backend/yandex/yandex.go then run make backenddocs" >}}
--- a/fs/accounting/stats.go
+++ b/fs/accounting/stats.go
@ -300,15 +300,13 @@ func (s *StatsInfo) String() string {
 		dateString             = ""
 		elapsedTime            = time.Since(startTime)
 		elapsedTimeSecondsOnly = elapsedTime.Truncate(time.Second/10) % time.Minute
-		displaySpeed           = ts.speed
-		displaySpeedUnit       string
+		displaySpeedString     string
 	)

 	if s.ci.DataRateUnit == "bits" {
-		displaySpeed *= 8
-		displaySpeedUnit = "bit/s"
+		displaySpeedString = fs.SizeSuffix(ts.speed * 8).BitRateUnit()
 	} else {
-		displaySpeedUnit = "Byte/s"
+		displaySpeedString = fs.SizeSuffix(ts.speed).ByteRateUnit()
 	}

 	if !s.ci.StatsOneLine {
@ -330,12 +328,12 @@ func (s *StatsInfo) String() string {
 		}
 	}

-	_, _ = fmt.Fprintf(buf, "%s%10s / %s, %s, %s, ETA %s%s",
+	_, _ = fmt.Fprintf(buf, "%s%11s / %s, %s, %s, ETA %s%s",
 		dateString,
 		fs.SizeSuffix(s.bytes),
-		fs.SizeSuffix(ts.totalBytes).Unit("Byte"),
+		fs.SizeSuffix(ts.totalBytes).ByteUnit(),
 		percent(s.bytes, ts.totalBytes),
-		fs.SizeSuffix(displaySpeed).Unit(displaySpeedUnit),
+		displaySpeedString,
 		etaString(s.bytes, ts.totalBytes, ts.speed),
 		xfrchkString,
 	)
--- a/fs/accounting/token_bucket_test.go
+++ b/fs/accounting/token_bucket_test.go
@ -24,7 +24,7 @@ func TestRcBwLimit(t *testing.T) {
 		"bytesPerSecond":   int64(1048576),
 		"bytesPerSecondTx": int64(1048576),
 		"bytesPerSecondRx": int64(1048576),
-		"rate":             "1M",
+		"rate":             "1Mi",
 	}, out)
 	assert.Equal(t, rate.Limit(1048576), TokenBucket.curr[0].Limit())

@ -36,7 +36,7 @@ func TestRcBwLimit(t *testing.T) {
 		"bytesPerSecond":   int64(1048576),
 		"bytesPerSecondTx": int64(1048576),
 		"bytesPerSecondRx": int64(1048576),
-		"rate":             "1M",
+		"rate":             "1Mi",
 	}, out)

 	// Set
@ -49,7 +49,7 @@ func TestRcBwLimit(t *testing.T) {
 		"bytesPerSecond":   int64(10485760),
 		"bytesPerSecondTx": int64(10485760),
 		"bytesPerSecondRx": int64(1048576),
-		"rate":             "10M:1M",
+		"rate":             "10Mi:1Mi",
 	}, out)
 	assert.Equal(t, rate.Limit(10485760), TokenBucket.curr[0].Limit())

@ -61,7 +61,7 @@ func TestRcBwLimit(t *testing.T) {
 		"bytesPerSecond":   int64(10485760),
 		"bytesPerSecondTx": int64(10485760),
 		"bytesPerSecondRx": int64(1048576),
-		"rate":             "10M:1M",
+		"rate":             "10Mi:1Mi",
 	}, out)

 	// Reset
--- a/fs/bwtimetable_test.go
+++ b/fs/bwtimetable_test.go
@ -43,7 +43,7 @@ func TestBwTimetableSet(t *testing.T) {
 				BwTimeSlot{DayOfTheWeek: 0, HHMM: 0, Bandwidth: BwPair{Tx: 666 * 1024, Rx: 666 * 1024}},
 			},
 			false,
-			"666k",
+			"666Ki",
 		},
 		{
 			"666:333",
@ -51,7 +51,7 @@ func TestBwTimetableSet(t *testing.T) {
 				BwTimeSlot{DayOfTheWeek: 0, HHMM: 0, Bandwidth: BwPair{Tx: 666 * 1024, Rx: 333 * 1024}},
 			},
 			false,
-			"666k:333k",
+			"666Ki:333Ki",
 		},
 		{
 			"10:20,666",
@ -65,7 +65,7 @@ func TestBwTimetableSet(t *testing.T) {
 				BwTimeSlot{DayOfTheWeek: 6, HHMM: 1020, Bandwidth: BwPair{Tx: 666 * 1024, Rx: 666 * 1024}},
 			},
 			false,
-			"Sun-10:20,666k Mon-10:20,666k Tue-10:20,666k Wed-10:20,666k Thu-10:20,666k Fri-10:20,666k Sat-10:20,666k",
+			"Sun-10:20,666Ki Mon-10:20,666Ki Tue-10:20,666Ki Wed-10:20,666Ki Thu-10:20,666Ki Fri-10:20,666Ki Sat-10:20,666Ki",
 		},
 		{
 			"10:20,666:333",
@ -79,7 +79,7 @@ func TestBwTimetableSet(t *testing.T) {
 				BwTimeSlot{DayOfTheWeek: 6, HHMM: 1020, Bandwidth: BwPair{Tx: 666 * 1024, Rx: 333 * 1024}},
 			},
 			false,
-			"Sun-10:20,666k:333k Mon-10:20,666k:333k Tue-10:20,666k:333k Wed-10:20,666k:333k Thu-10:20,666k:333k Fri-10:20,666k:333k Sat-10:20,666k:333k",
+			"Sun-10:20,666Ki:333Ki Mon-10:20,666Ki:333Ki Tue-10:20,666Ki:333Ki Wed-10:20,666Ki:333Ki Thu-10:20,666Ki:333Ki Fri-10:20,666Ki:333Ki Sat-10:20,666Ki:333Ki",
 		},
 		{
 			"11:00,333 13:40,666 23:50,10M 23:59,off",
@ -114,7 +114,7 @@ func TestBwTimetableSet(t *testing.T) {
 				BwTimeSlot{DayOfTheWeek: 6, HHMM: 2359, Bandwidth: BwPair{Tx: -1, Rx: -1}},
 			},
 			false,
-			"Sun-11:00,333k Mon-11:00,333k Tue-11:00,333k Wed-11:00,333k Thu-11:00,333k Fri-11:00,333k Sat-11:00,333k Sun-13:40,666k Mon-13:40,666k Tue-13:40,666k Wed-13:40,666k Thu-13:40,666k Fri-13:40,666k Sat-13:40,666k Sun-23:50,10M Mon-23:50,10M Tue-23:50,10M Wed-23:50,10M Thu-23:50,10M Fri-23:50,10M Sat-23:50,10M Sun-23:59,off Mon-23:59,off Tue-23:59,off Wed-23:59,off Thu-23:59,off Fri-23:59,off Sat-23:59,off",
+			"Sun-11:00,333Ki Mon-11:00,333Ki Tue-11:00,333Ki Wed-11:00,333Ki Thu-11:00,333Ki Fri-11:00,333Ki Sat-11:00,333Ki Sun-13:40,666Ki Mon-13:40,666Ki Tue-13:40,666Ki Wed-13:40,666Ki Thu-13:40,666Ki Fri-13:40,666Ki Sat-13:40,666Ki Sun-23:50,10Mi Mon-23:50,10Mi Tue-23:50,10Mi Wed-23:50,10Mi Thu-23:50,10Mi Fri-23:50,10Mi Sat-23:50,10Mi Sun-23:59,off Mon-23:59,off Tue-23:59,off Wed-23:59,off Thu-23:59,off Fri-23:59,off Sat-23:59,off",
 		},
 		{
 			"11:00,333:666 13:40,666:off 23:50,10M:1M 23:59,off:10M",
@ -149,7 +149,7 @@ func TestBwTimetableSet(t *testing.T) {
 				BwTimeSlot{DayOfTheWeek: 6, HHMM: 2359, Bandwidth: BwPair{Tx: -1, Rx: 10 * 1024 * 1024}},
 			},
 			false,
-			"Sun-11:00,333k:666k Mon-11:00,333k:666k Tue-11:00,333k:666k Wed-11:00,333k:666k Thu-11:00,333k:666k Fri-11:00,333k:666k Sat-11:00,333k:666k Sun-13:40,666k:off Mon-13:40,666k:off Tue-13:40,666k:off Wed-13:40,666k:off Thu-13:40,666k:off Fri-13:40,666k:off Sat-13:40,666k:off Sun-23:50,10M:1M Mon-23:50,10M:1M Tue-23:50,10M:1M Wed-23:50,10M:1M Thu-23:50,10M:1M Fri-23:50,10M:1M Sat-23:50,10M:1M Sun-23:59,off:10M Mon-23:59,off:10M Tue-23:59,off:10M Wed-23:59,off:10M Thu-23:59,off:10M Fri-23:59,off:10M Sat-23:59,off:10M",
+			"Sun-11:00,333Ki:666Ki Mon-11:00,333Ki:666Ki Tue-11:00,333Ki:666Ki Wed-11:00,333Ki:666Ki Thu-11:00,333Ki:666Ki Fri-11:00,333Ki:666Ki Sat-11:00,333Ki:666Ki Sun-13:40,666Ki:off Mon-13:40,666Ki:off Tue-13:40,666Ki:off Wed-13:40,666Ki:off Thu-13:40,666Ki:off Fri-13:40,666Ki:off Sat-13:40,666Ki:off Sun-23:50,10Mi:1Mi Mon-23:50,10Mi:1Mi Tue-23:50,10Mi:1Mi Wed-23:50,10Mi:1Mi Thu-23:50,10Mi:1Mi Fri-23:50,10Mi:1Mi Sat-23:50,10Mi:1Mi Sun-23:59,off:10Mi Mon-23:59,off:10Mi Tue-23:59,off:10Mi Wed-23:59,off:10Mi Thu-23:59,off:10Mi Fri-23:59,off:10Mi Sat-23:59,off:10Mi",
 		},
 		{
 			"Mon-11:00,333 Tue-13:40,666:333 Fri-00:00,10M Sat-10:00,off Sun-23:00,666",
@ -161,7 +161,7 @@ func TestBwTimetableSet(t *testing.T) {
 				BwTimeSlot{DayOfTheWeek: 0, HHMM: 2300, Bandwidth: BwPair{Tx: 666 * 1024, Rx: 666 * 1024}},
 			},
 			false,
-			"Mon-11:00,333k Tue-13:40,666k:333k Fri-00:00,10M Sat-10:00,off Sun-23:00,666k",
+			"Mon-11:00,333Ki Tue-13:40,666Ki:333Ki Fri-00:00,10Mi Sat-10:00,off Sun-23:00,666Ki",
 		},
 		{
 			"Mon-11:00,333 Tue-13:40,666 Fri-00:00,10M 00:01,off Sun-23:00,666:off",
@ -179,7 +179,7 @@ func TestBwTimetableSet(t *testing.T) {
 				BwTimeSlot{DayOfTheWeek: 0, HHMM: 2300, Bandwidth: BwPair{Tx: 666 * 1024, Rx: -1}},
 			},
 			false,
-			"Mon-11:00,333k Tue-13:40,666k Fri-00:00,10M Sun-00:01,off Mon-00:01,off Tue-00:01,off Wed-00:01,off Thu-00:01,off Fri-00:01,off Sat-00:01,off Sun-23:00,666k:off",
+			"Mon-11:00,333Ki Tue-13:40,666Ki Fri-00:00,10Mi Sun-00:01,off Mon-00:01,off Tue-00:01,off Wed-00:01,off Thu-00:01,off Fri-00:01,off Sat-00:01,off Sun-23:00,666Ki:off",
 		},
 		{
 			// from the docs
@ -222,7 +222,7 @@ func TestBwTimetableSet(t *testing.T) {
 				BwTimeSlot{DayOfTheWeek: 6, HHMM: 2300, Bandwidth: BwPair{Tx: -1, Rx: -1}},
 			},
 			false,
-			"Sun-08:00,512k Mon-08:00,512k Tue-08:00,512k Wed-08:00,512k Thu-08:00,512k Fri-08:00,512k Sat-08:00,512k Sun-12:00,10M Mon-12:00,10M Tue-12:00,10M Wed-12:00,10M Thu-12:00,10M Fri-12:00,10M Sat-12:00,10M Sun-13:00,512k Mon-13:00,512k Tue-13:00,512k Wed-13:00,512k Thu-13:00,512k Fri-13:00,512k Sat-13:00,512k Sun-18:00,30M Mon-18:00,30M Tue-18:00,30M Wed-18:00,30M Thu-18:00,30M Fri-18:00,30M Sat-18:00,30M Sun-23:00,off Mon-23:00,off Tue-23:00,off Wed-23:00,off Thu-23:00,off Fri-23:00,off Sat-23:00,off",
+			"Sun-08:00,512Ki Mon-08:00,512Ki Tue-08:00,512Ki Wed-08:00,512Ki Thu-08:00,512Ki Fri-08:00,512Ki Sat-08:00,512Ki Sun-12:00,10Mi Mon-12:00,10Mi Tue-12:00,10Mi Wed-12:00,10Mi Thu-12:00,10Mi Fri-12:00,10Mi Sat-12:00,10Mi Sun-13:00,512Ki Mon-13:00,512Ki Tue-13:00,512Ki Wed-13:00,512Ki Thu-13:00,512Ki Fri-13:00,512Ki Sat-13:00,512Ki Sun-18:00,30Mi Mon-18:00,30Mi Tue-18:00,30Mi Wed-18:00,30Mi Thu-18:00,30Mi Fri-18:00,30Mi Sat-18:00,30Mi Sun-23:00,off Mon-23:00,off Tue-23:00,off Wed-23:00,off Thu-23:00,off Fri-23:00,off Sat-23:00,off",
 		},
 		{
 			// from the docs
@ -234,7 +234,7 @@ func TestBwTimetableSet(t *testing.T) {
 				BwTimeSlot{DayOfTheWeek: 0, HHMM: 2000, Bandwidth: BwPair{Tx: -1, Rx: -1}},
 			},
 			false,
-			"Mon-00:00,512k Fri-23:59,10M Sat-10:00,1M Sun-20:00,off",
+			"Mon-00:00,512Ki Fri-23:59,10Mi Sat-10:00,1Mi Sun-20:00,off",
 		},
 		{
 			// from the docs
@ -251,7 +251,7 @@ func TestBwTimetableSet(t *testing.T) {
 				BwTimeSlot{DayOfTheWeek: 0, HHMM: 2000, Bandwidth: BwPair{Tx: -1, Rx: -1}},
 			},
 			false,
-			"Mon-00:00,512k Sun-12:00,1M Mon-12:00,1M Tue-12:00,1M Wed-12:00,1M Thu-12:00,1M Fri-12:00,1M Sat-12:00,1M Sun-20:00,off",
+			"Mon-00:00,512Ki Sun-12:00,1Mi Mon-12:00,1Mi Tue-12:00,1Mi Wed-12:00,1Mi Thu-12:00,1Mi Fri-12:00,1Mi Sat-12:00,1Mi Sun-20:00,off",
 		},
 	} {
 		tt := BwTimetable{}
@ -537,13 +537,13 @@ func TestBwTimetableMarshalJSON(t *testing.T) {
 			BwTimetable{
 				BwTimeSlot{DayOfTheWeek: 0, HHMM: 0, Bandwidth: BwPair{Tx: 666 * 1024, Rx: 666 * 1024}},
 			},
-			`"666k"`,
+			`"666Ki"`,
 		},
 		{
 			BwTimetable{
 				BwTimeSlot{DayOfTheWeek: 0, HHMM: 0, Bandwidth: BwPair{Tx: 666 * 1024, Rx: 333 * 1024}},
 			},
-			`"666k:333k"`,
+			`"666Ki:333Ki"`,
 		},
 		{
 			BwTimetable{
@ -555,7 +555,7 @@ func TestBwTimetableMarshalJSON(t *testing.T) {
 				BwTimeSlot{DayOfTheWeek: 5, HHMM: 1020, Bandwidth: BwPair{Tx: 666 * 1024, Rx: 666 * 1024}},
 				BwTimeSlot{DayOfTheWeek: 6, HHMM: 1020, Bandwidth: BwPair{Tx: 666 * 1024, Rx: 666 * 1024}},
 			},
-			`"Sun-10:20,666k Mon-10:20,666k Tue-10:20,666k Wed-10:20,666k Thu-10:20,666k Fri-10:20,666k Sat-10:20,666k"`,
+			`"Sun-10:20,666Ki Mon-10:20,666Ki Tue-10:20,666Ki Wed-10:20,666Ki Thu-10:20,666Ki Fri-10:20,666Ki Sat-10:20,666Ki"`,
 		},
 	} {
 		got, err := json.Marshal(test.in)
--- a/fs/config/configflags/configflags.go
+++ b/fs/config/configflags/configflags.go
@ -97,8 +97,8 @@ func AddFlags(ci *fs.ConfigInfo, flagSet *pflag.FlagSet) {
 	flags.IntVarP(flagSet, &ci.StatsFileNameLength, "stats-file-name-length", "", ci.StatsFileNameLength, "Max file name length in stats. 0 for no limit")
 	flags.FVarP(flagSet, &ci.LogLevel, "log-level", "", "Log level DEBUG|INFO|NOTICE|ERROR")
 	flags.FVarP(flagSet, &ci.StatsLogLevel, "stats-log-level", "", "Log level to show --stats output DEBUG|INFO|NOTICE|ERROR")
-	flags.FVarP(flagSet, &ci.BwLimit, "bwlimit", "", "Bandwidth limit in kByte/s, or use suffix b|k|M|G or a full timetable.")
-	flags.FVarP(flagSet, &ci.BwLimitFile, "bwlimit-file", "", "Bandwidth limit per file in kByte/s, or use suffix b|k|M|G or a full timetable.")
+	flags.FVarP(flagSet, &ci.BwLimit, "bwlimit", "", "Bandwidth limit in KiByte/s, or use suffix B|K|M|G|T|P or a full timetable.")
+	flags.FVarP(flagSet, &ci.BwLimitFile, "bwlimit-file", "", "Bandwidth limit per file in KiByte/s, or use suffix B|K|M|G|T|P or a full timetable.")
 	flags.FVarP(flagSet, &ci.BufferSize, "buffer-size", "", "In memory buffer size when reading files for each --transfer.")
 	flags.FVarP(flagSet, &ci.StreamingUploadCutoff, "streaming-upload-cutoff", "", "Cutoff for switching to chunked upload if file size is unknown. Upload starts after reaching cutoff or when file ends.")
 	flags.FVarP(flagSet, &ci.Dump, "dump", "", "List of items to dump from: "+fs.DumpFlagsList)
--- a/fs/config/ui.go
+++ b/fs/config/ui.go
@ -353,7 +353,7 @@ func ChooseOption(o *fs.Option, name string) string {
 	case bool:
 		what = "boolean value (true or false)"
 	case fs.SizeSuffix:
-		what = "size with suffix k,M,G,T"
+		what = "size with suffix K,M,G,T"
 	case fs.Duration:
 		what = "duration s,m,h,d,w,M,y"
 	case int, int8, int16, int32, int64:
--- a/fs/filter/filterflags/filterflags.go
+++ b/fs/filter/filterflags/filterflags.go
@ -41,8 +41,8 @@ func AddFlags(flagSet *pflag.FlagSet) {
 	flags.StringArrayVarP(flagSet, &Opt.FilesFromRaw, "files-from-raw", "", nil, "Read list of source-file names from file without any processing of lines (use - to read from stdin)")
 	flags.FVarP(flagSet, &Opt.MinAge, "min-age", "", "Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y")
 	flags.FVarP(flagSet, &Opt.MaxAge, "max-age", "", "Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y")
-	flags.FVarP(flagSet, &Opt.MinSize, "min-size", "", "Only transfer files bigger than this in k or suffix b|k|M|G")
-	flags.FVarP(flagSet, &Opt.MaxSize, "max-size", "", "Only transfer files smaller than this in k or suffix b|k|M|G")
+	flags.FVarP(flagSet, &Opt.MinSize, "min-size", "", "Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P")
+	flags.FVarP(flagSet, &Opt.MaxSize, "max-size", "", "Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P")
 	flags.BoolVarP(flagSet, &Opt.IgnoreCase, "ignore-case", "", false, "Ignore case in filters (case insensitive)")
 	//cvsExclude     = BoolP("cvs-exclude", "C", false, "Exclude files in the same way CVS does")
 }
--- a/fs/fs_test.go
+++ b/fs/fs_test.go
@ -99,7 +99,7 @@ func TestOption(t *testing.T) {
 		Name:  "potato",
 		Value: SizeSuffix(17 << 20),
 	}
-	assert.Equal(t, "17M", d.String())
+	assert.Equal(t, "17Mi", d.String())
 	assert.Equal(t, "SizeSuffix", d.Type())
 	err := d.Set("18M")
 	assert.NoError(t, err)
--- a/fs/rc/jobs/job_test.go
+++ b/fs/rc/jobs/job_test.go
@ -257,7 +257,7 @@ func TestExecuteJobWithConfig(t *testing.T) {
 	called := false
 	jobFn := func(ctx context.Context, in rc.Params) (rc.Params, error) {
 		ci := fs.GetConfig(ctx)
-		assert.Equal(t, 42*fs.MebiByte, ci.BufferSize)
+		assert.Equal(t, 42*fs.Mebi, ci.BufferSize)
 		called = true
 		return nil, nil
 	}
@ -278,7 +278,7 @@ func TestExecuteJobWithConfig(t *testing.T) {
 	assert.Equal(t, true, called)
 	// Check that wasn't the default
 	ci := fs.GetConfig(ctx)
-	assert.NotEqual(t, 42*fs.MebiByte, ci.BufferSize)
+	assert.NotEqual(t, 42*fs.Mebi, ci.BufferSize)
 }

 func TestExecuteJobWithFilter(t *testing.T) {
--- a/fs/sizesuffix.go
+++ b/fs/sizesuffix.go
@ -1,6 +1,6 @@
 package fs

-// SizeSuffix is parsed by flag with k/M/G suffixes
+// SizeSuffix is parsed by flag with K/M/G binary suffixes
 import (
 	"encoding/json"
 	"fmt"
@ -17,13 +17,21 @@ type SizeSuffix int64

 // Common multipliers for SizeSuffix
 const (
-	Byte SizeSuffix = 1 << (iota * 10)
-	KibiByte
-	MebiByte
-	GibiByte
-	TebiByte
-	PebiByte
-	ExbiByte
+	SizeSuffixBase SizeSuffix = 1 << (iota * 10)
+	Kibi
+	Mebi
+	Gibi
+	Tebi
+	Pebi
+	Exbi
+)
+const (
+	// SizeSuffixMax is the largest SizeSuffix multiplier
+	SizeSuffixMax = Exbi
+	// SizeSuffixMaxValue is the largest value that can be used to create SizeSuffix
+	SizeSuffixMaxValue = math.MaxInt64
+	// SizeSuffixMinValue is the smallest value that can be used to create SizeSuffix
+	SizeSuffixMinValue = math.MinInt64
 )

 // Turn SizeSuffix into a string and a suffix
@ -35,24 +43,27 @@ func (x SizeSuffix) string() (string, string) {
 		return "off", ""
 	case x == 0:
 		return "0", ""
-	case x < 1<<10:
+	case x < Kibi:
 		scaled = float64(x)
 		suffix = ""
-	case x < 1<<20:
-		scaled = float64(x) / (1 << 10)
-		suffix = "k"
-	case x < 1<<30:
-		scaled = float64(x) / (1 << 20)
-		suffix = "M"
-	case x < 1<<40:
-		scaled = float64(x) / (1 << 30)
-		suffix = "G"
-	case x < 1<<50:
-		scaled = float64(x) / (1 << 40)
-		suffix = "T"
+	case x < Mebi:
+		scaled = float64(x) / float64(Kibi)
+		suffix = "Ki"
+	case x < Gibi:
+		scaled = float64(x) / float64(Mebi)
+		suffix = "Mi"
+	case x < Tebi:
+		scaled = float64(x) / float64(Gibi)
+		suffix = "Gi"
+	case x < Pebi:
+		scaled = float64(x) / float64(Tebi)
+		suffix = "Ti"
+	case x < Exbi:
+		scaled = float64(x) / float64(Pebi)
+		suffix = "Pi"
 	default:
-		scaled = float64(x) / (1 << 50)
-		suffix = "P"
+		scaled = float64(x) / float64(Exbi)
+		suffix = "Ei"
 	}
 	if math.Floor(scaled) == scaled {
 		return fmt.Sprintf("%.0f", scaled), suffix
@ -67,12 +78,67 @@ func (x SizeSuffix) String() string {
 }

 // Unit turns SizeSuffix into a string with a unit
-func (x SizeSuffix) Unit(unit string) string {
+func (x SizeSuffix) unit(unit string) string {
 	val, suffix := x.string()
 	if val == "off" {
 		return val
 	}
-	return val + " " + suffix + unit
+	var suffixUnit string
+	if suffix != "" && unit != "" {
+		suffixUnit = suffix + unit
+	} else {
+		suffixUnit = suffix + unit
+	}
+	return val + " " + suffixUnit
+}
+
+// BitUnit turns SizeSuffix into a string with bit unit
+func (x SizeSuffix) BitUnit() string {
+	return x.unit("bit")
+}
+
+// BitRateUnit turns SizeSuffix into a string with bit rate unit
+func (x SizeSuffix) BitRateUnit() string {
+	return x.unit("bit/s")
+}
+
+// ByteUnit turns SizeSuffix into a string with byte unit
+func (x SizeSuffix) ByteUnit() string {
+	return x.unit("Byte")
+}
+
+// ByteRateUnit turns SizeSuffix into a string with byte rate unit
+func (x SizeSuffix) ByteRateUnit() string {
+	return x.unit("Byte/s")
+}
+
+// ByteShortUnit turns SizeSuffix into a string with byte unit short form
+func (x SizeSuffix) ByteShortUnit() string {
+	return x.unit("B")
+}
+
+// ByteRateShortUnit turns SizeSuffix into a string with byte rate unit short form
+func (x SizeSuffix) ByteRateShortUnit() string {
+	return x.unit("B/s")
+}
+
+func (x *SizeSuffix) multiplierFromSymbol(s byte) (found bool, multiplier float64) {
+	switch s {
+	case 'k', 'K':
+		return true, float64(Kibi)
+	case 'm', 'M':
+		return true, float64(Mebi)
+	case 'g', 'G':
+		return true, float64(Gibi)
+	case 't', 'T':
+		return true, float64(Tebi)
+	case 'p', 'P':
+		return true, float64(Pebi)
+	case 'e', 'E':
+		return true, float64(Exbi)
+	default:
+		return false, float64(SizeSuffixBase)
+	}
 }

 // Set a SizeSuffix
@ -86,25 +152,42 @@ func (x *SizeSuffix) Set(s string) error {
 	}
 	suffix := s[len(s)-1]
 	suffixLen := 1
+	multiplierFound := false
 	var multiplier float64
 	switch suffix {
 	case '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', '.':
 		suffixLen = 0
-		multiplier = 1 << 10
+		multiplier = float64(Kibi)
 	case 'b', 'B':
-		multiplier = 1
-	case 'k', 'K':
-		multiplier = 1 << 10
-	case 'm', 'M':
-		multiplier = 1 << 20
-	case 'g', 'G':
-		multiplier = 1 << 30
-	case 't', 'T':
-		multiplier = 1 << 40
-	case 'p', 'P':
-		multiplier = 1 << 50
+		if len(s) > 2 && s[len(s)-2] == 'i' {
+			suffix = s[len(s)-3]
+			suffixLen = 3
+			if multiplierFound, multiplier = x.multiplierFromSymbol(suffix); !multiplierFound {
+				return errors.Errorf("bad suffix %q", suffix)
+			}
+			// Could also support SI form MB, and treat it equivalent to MiB, but perhaps better to reserve it for CountSuffix?
+			//} else if len(s) > 1 {
+			//	suffix = s[len(s)-2]
+			//	if multiplierFound, multiplier = x.multiplierFromSymbol(suffix); multiplierFound {
+			//		suffixLen = 2
+			//	}
+			//}
+		} else {
+			multiplier = float64(SizeSuffixBase)
+		}
+	case 'i', 'I':
+		if len(s) > 1 {
+			suffix = s[len(s)-2]
+			suffixLen = 2
+			multiplierFound, multiplier = x.multiplierFromSymbol(suffix)
+		}
+		if !multiplierFound {
+			return errors.Errorf("bad suffix %q", suffix)
+		}
 	default:
-		return errors.Errorf("bad suffix %q", suffix)
+		if multiplierFound, multiplier = x.multiplierFromSymbol(suffix); !multiplierFound {
+			return errors.Errorf("bad suffix %q", suffix)
+		}
 	}
 	s = s[:len(s)-suffixLen]
 	value, err := strconv.ParseFloat(s, 64)
--- a/fs/sizesuffix_test.go
+++ b/fs/sizesuffix_test.go
@ -27,11 +27,11 @@ func TestSizeSuffixString(t *testing.T) {
 	}{
 		{0, "0"},
 		{102, "102"},
-		{1024, "1k"},
-		{1024 * 1024, "1M"},
-		{1024 * 1024 * 1024, "1G"},
-		{10 * 1024 * 1024 * 1024, "10G"},
-		{10.1 * 1024 * 1024 * 1024, "10.100G"},
+		{1024, "1Ki"},
+		{1024 * 1024, "1Mi"},
+		{1024 * 1024 * 1024, "1Gi"},
+		{10 * 1024 * 1024 * 1024, "10Gi"},
+		{10.1 * 1024 * 1024 * 1024, "10.100Gi"},
 		{-1, "off"},
 		{-100, "off"},
 	} {
@ -41,26 +41,73 @@ func TestSizeSuffixString(t *testing.T) {
 	}
 }

-func TestSizeSuffixUnit(t *testing.T) {
+func TestSizeSuffixByteShortUnit(t *testing.T) {
 	for _, test := range []struct {
 		in   float64
 		want string
 	}{
-		{0, "0 Bytes"},
-		{102, "102 Bytes"},
-		{1024, "1 kBytes"},
-		{1024 * 1024, "1 MBytes"},
-		{1024 * 1024 * 1024, "1 GBytes"},
-		{10 * 1024 * 1024 * 1024, "10 GBytes"},
-		{10.1 * 1024 * 1024 * 1024, "10.100 GBytes"},
-		{10 * 1024 * 1024 * 1024 * 1024, "10 TBytes"},
-		{10 * 1024 * 1024 * 1024 * 1024 * 1024, "10 PBytes"},
-		{1 * 1024 * 1024 * 1024 * 1024 * 1024 * 1024, "1024 PBytes"},
+		{0, "0 B"},
+		{102, "102 B"},
+		{1024, "1 KiB"},
+		{1024 * 1024, "1 MiB"},
+		{1024 * 1024 * 1024, "1 GiB"},
+		{10 * 1024 * 1024 * 1024, "10 GiB"},
+		{10.1 * 1024 * 1024 * 1024, "10.100 GiB"},
+		{10 * 1024 * 1024 * 1024 * 1024, "10 TiB"},
+		{10 * 1024 * 1024 * 1024 * 1024 * 1024, "10 PiB"},
+		{1 * 1024 * 1024 * 1024 * 1024 * 1024 * 1024, "1 EiB"},
 		{-1, "off"},
 		{-100, "off"},
 	} {
 		ss := SizeSuffix(test.in)
-		got := ss.Unit("Bytes")
+		got := ss.ByteShortUnit()
+		assert.Equal(t, test.want, got)
+	}
+}
+
+func TestSizeSuffixByteUnit(t *testing.T) {
+	for _, test := range []struct {
+		in   float64
+		want string
+	}{
+		{0, "0 Byte"},
+		{102, "102 Byte"},
+		{1024, "1 KiByte"},
+		{1024 * 1024, "1 MiByte"},
+		{1024 * 1024 * 1024, "1 GiByte"},
+		{10 * 1024 * 1024 * 1024, "10 GiByte"},
+		{10.1 * 1024 * 1024 * 1024, "10.100 GiByte"},
+		{10 * 1024 * 1024 * 1024 * 1024, "10 TiByte"},
+		{10 * 1024 * 1024 * 1024 * 1024 * 1024, "10 PiByte"},
+		{1 * 1024 * 1024 * 1024 * 1024 * 1024 * 1024, "1 EiByte"},
+		{-1, "off"},
+		{-100, "off"},
+	} {
+		ss := SizeSuffix(test.in)
+		got := ss.ByteUnit()
+		assert.Equal(t, test.want, got)
+	}
+}
+
+func TestSizeSuffixBitRateUnit(t *testing.T) {
+	for _, test := range []struct {
+		in   float64
+		want string
+	}{
+		{0, "0 bit/s"},
+		{1024, "1 Kibit/s"},
+		{1024 * 1024, "1 Mibit/s"},
+		{1024 * 1024 * 1024, "1 Gibit/s"},
+		{10 * 1024 * 1024 * 1024, "10 Gibit/s"},
+		{10.1 * 1024 * 1024 * 1024, "10.100 Gibit/s"},
+		{10 * 1024 * 1024 * 1024 * 1024, "10 Tibit/s"},
+		{10 * 1024 * 1024 * 1024 * 1024 * 1024, "10 Pibit/s"},
+		{1 * 1024 * 1024 * 1024 * 1024 * 1024 * 1024, "1 Eibit/s"},
+		{-1, "off"},
+		{-100, "off"},
+	} {
+		ss := SizeSuffix(test.in)
+		got := ss.BitRateUnit()
 		assert.Equal(t, test.want, got)
 	}
 }
@ -77,9 +124,23 @@ func TestSizeSuffixSet(t *testing.T) {
 		{"0.1k", 102, false},
 		{"0.1", 102, false},
 		{"1K", 1024, false},
+		{"1k", 1024, false},
+		//{"1KB", 1024, false},
+		//{"1kB", 1024, false},
+		//{"1kb", 1024, false},
+		{"1KI", 1024, false},
+		{"1Ki", 1024, false},
+		{"1kI", 1024, false},
+		{"1ki", 1024, false},
+		{"1KiB", 1024, false},
+		{"1KiB", 1024, false},
+		{"1kib", 1024, false},
 		{"1", 1024, false},
 		{"2.5", 1024 * 2.5, false},
 		{"1M", 1024 * 1024, false},
+		//{"1MB", 1024 * 1024, false},
+		{"1Mi", 1024 * 1024, false},
+		{"1MiB", 1024 * 1024, false},
 		{"1.g", 1024 * 1024 * 1024, false},
 		{"10G", 10 * 1024 * 1024 * 1024, false},
 		{"10T", 10 * 1024 * 1024 * 1024 * 1024, false},
@ -91,6 +152,9 @@ func TestSizeSuffixSet(t *testing.T) {
 		{"1.q", 0, true},
 		{"1q", 0, true},
 		{"-1K", 0, true},
+		{"1i", 0, true},
+		{"1iB", 0, true},
+		{"1MB", 0, true},
 	} {
 		ss := SizeSuffix(0)
 		err := ss.Set(test.in)
--- a/fstest/fstests/fstests.go
+++ b/fstest/fstests/fstests.go
@ -1792,7 +1792,7 @@ func Run(t *testing.T, opt *Opt) {
 				minChunkSize = opt.ChunkedUpload.CeilChunkSize(minChunkSize)
 			}

-			maxChunkSize := 2 * fs.MebiByte
+			maxChunkSize := 2 * fs.Mebi
 			if maxChunkSize < 2*minChunkSize {
 				maxChunkSize = 2 * minChunkSize
 			}
--- a/vfs/vfs.go
+++ b/vfs/vfs.go
@ -543,7 +543,7 @@ func fillInMissingSizes(total, used, free, unknownFree int64) (newTotal, newUsed
 	return total, used, free
 }

-// If the total size isn't known then we will aim for this many bytes free (1PB)
+// If the total size isn't known then we will aim for this many bytes free (1 PiB)
 const unknownFreeBytes = 1 << 50

 // Statfs returns into about the filing system if known
--- a/vfs/vfscache/downloaders/downloaders.go
+++ b/vfs/vfscache/downloaders/downloaders.go
@ -593,7 +593,7 @@ func (dl *downloader) _stop() {

 	// stop the downloader by stopping the async reader buffering
 	// any more input. This causes all the stuff in the async
-	// buffer (which can be many MB) to be written to the disk
+	// buffer (which can be many MiB) to be written to the disk
 	// before exiting.
 	if dl.in != nil {
 		dl.in.StopBuffering()
--- a/vfs/vfscommon/options.go
+++ b/vfs/vfscommon/options.go
@ -51,13 +51,13 @@ var DefaultOpt = Options{
 	CacheMode:         CacheModeOff,
 	CacheMaxAge:       3600 * time.Second,
 	CachePollInterval: 60 * time.Second,
-	ChunkSize:         128 * fs.MebiByte,
+	ChunkSize:         128 * fs.Mebi,
 	ChunkSizeLimit:    -1,
 	CacheMaxSize:      -1,
 	CaseInsensitive:   runtime.GOOS == "windows" || runtime.GOOS == "darwin", // default to true on Windows and Mac, false otherwise
 	WriteWait:         1000 * time.Millisecond,
 	ReadWait:          20 * time.Millisecond,
 	WriteBack:         5 * time.Second,
-	ReadAhead:         0 * fs.MebiByte,
+	ReadAhead:         0 * fs.Mebi,
 	UsedIsSize:        false,
 }