This was a hack to let libmpv API users pass a d3d device to mpv. It's
not needed anymore for 2 reasons:
1. ANGLE does not have this problem
2. Even native GL via nVidia (where this failed) seems to not require
this anymore
Implements --hwdec=videotoolbox on iOS. Similar to hwdec_osx.c, but
using CVPixelBuffer APIs available on iOS instead of the equivalent
IOSurface APIs in macOS.
As threatened by the API changes document.
This commit also removes or stubs equivalent calls in IPC and Lua
scripting.
The stubs are left to maintain ABI compatibility. The semantics of the
API functions have been close enough to doing nothing that this probably
won't even break existing API users. Probably.
Since the recent release was named 0.22.0 instead of 0.21.1, bump all
mentions of 0.22.0 to 0.23.0. These were planned removals of deprecated
versions, which obviously didn't happen in 0.22.0.
Seems like this confused users quite often.
Instead of --profile=pseudo-gui, --player-operation-mode=pseudo-gui now
has to be used to invoke pseudo GUI mode. The old way still works, and
still behaves in the old way.
With the merging of options and properties, the mpv_set_option()
function is close to being useless, and mpv_set_property() can be used
for everything instead. There are certain conflicts remaining, which are
explained in depth in the docs. For now, none of this should affect
existing code using the client API.
Make mpv_set_property() redirect to mpv_set_option() before
initialization.
Remove some options marked as M_OPT_FIXED. The "pause" and "speed"
options cannot be written anymore without the playloop being notified by
it, so the M_OPT_FIXED does nothing. For "vo-mmcss-profile", the problem
was lack of synchronization, which has been added. I'm not sure what the
problem was with "frames" - I think it was only marked as M_OPT_FIXED
because changing it during playback will have no effect. Except for
pause/speed, these changes are needed to make them writable as
properties after mpv_initialize().
Also replace all remaining uses of CONF_GLOBAL with M_OPT_FIXED.
They're useless, and I have no idea what they're actually supposed to do
(wrt. pending input processing changes).
Also remove their implicit uses from the IPC handlers.
This workaround prevented that libmpv users could accidentally crash
when the SIGPIPE signal was triggered by FFmpeg's OpenSSL/GnuTLS usage.
But it also modifies the global signal handler state, so remove it now
that this workaround is not required anymore.
This overlay support specifically skips the OpenGL rendering chain, and
uses GL rendering only for OSD/subtitles. This is for devices which
don't have performant GL support.
hwdec_rpi.c contains code ported from vo_rpi.c. vo_rpi.c is going to be
deprecated. I left in the code for uploading sw surfaces (as it might
be slightly more efficient for rendering sw decoded video), although
it's dead code for now.
Create the core thread right in mpv_create(), and reduce what
mpv_initialize() does further. This is simpler, and allows the API user
to do more before calling mpv_initialize(). The latter is not the real
goal, rather we'd like mpv_intialize() reduced to do almost nothing. It
still does a lot, but nothing truly special anymore that is absolutely
required for basic mpv workings.
One thing we want the user to be able to do is changing properties
before mpv_initialize() to reduce the special status of
mpv_set_option().
The client API can do this (and there are apparently some libmpv using
projects which rely on this). But it's just unnecessary bloat as it
requires a separate code path from the option parser. It would be better
to remove this code. Formally deprecate it, including API bump and
warning in the API changes file to make it really clear.
Forgotten in previous commit.
Also minor semi-related change: remove the extra "," from the
mpv_sub_api enum, which I accidentally added in the previous commit.
(C99 is fine with trailing ",", C89 strictly speaking not. So do
this for maximum compatibility.)
Old-style commands using _ as separator (e.g. show_progress) were still
used in some places, including documentation and configuration files.
This commit updates all such instances to the new style (show-progress)
so that commands are easier to find in the manual.
Although it appears to be accepted by the function, MSGL_STATUS messages
are never passed to the client API. Consequently "status" has the same
meaning as "v" and is useless.
If a mpv_node wrapped a string, the behavior was different from calling
mpv_set_property() with MPV_FORMAT_STRING directly. Change this.
The original intention was to be strict about types if MPV_FORMAT_NODE
is used. But I think the result was less than ideal, and the same change
towards less strict behavior was made to mpv_set_option() ages ago.
vo_opengl_cb is a special case, because we somehow have to render video
asynchronously, all while "trusting" the API user to do it correctly.
This didn't quite work, and a while ago a compromise using a timeout to
prevent theoretically possible deadlocks was added.
Make it even more synchronous. Basically, go all the way, and
synchronize rendering between VO and user renderer thread to the
full extent possible.
This means the silly frame queue is dropped, and we event attempt to
synchronize the GL SwapBuffer call (via mpv_opengl_cb_report_flip()).
The changes introduced with commit dc33eb56 are effectively dropped. I
don't even remember if they mattered.
In the future, we might make all VOs fetch asynchronously from a frame
queue, which would mostly remove the differences between vo_opengl and
vo_opengl_cb, but this will take a while (if it will even be done).
The VAAPI EGL interop code will need access to the X11 Display. While
GLX could return it from the current GLX context, EGL has no such
mechanism. (At least no standard one supported by all implementations.)
So mpv makes up such a mechanism.
For internal purposes, this is very rather awkward solution, but it's
needed for libmpv anyway.
This is a pseudo-OpenGL extension for letting libmpv query native
windowing system handles from the API user. (It uses the OpenGL
extension mechanism because I'm lazy. In theory it would be nicer to let
the user pass them with mpv_opengl_cb_init_gl(), but this would require
a more intrusive API change to extend its argument list.)
The naming of the extension and associated function was unnecessarily
Windows specific (using "D3D"), even though it would work just fine for
other platforms. So deprecate the old names and introduce new ones. The
old ones still work.
Make a difference between different mpv_handles pointing to the same mpv
core, or different mpv cores. While we're not explicit about it, at
least avoid that someone could misunderstand when really looking for the
case of mpv_handles pointing to the same core.
This is basically a hack for drivers which prevent the mpv DXVA2 decoder
glue from working if OpenGL is in fullscreen mode.
Since it doesn't add any "hard" new API to the client API, some of the
code would be required for a true zero-copy hw decoding pipeline, and
sine it isn't too much code after all, this is probably acceptable.
Client API users can enable log output with mpv_request_log_messages().
But you can enable only a single log level. This is normally enough, but
the --msg-level option (which controls the terminal log level) provides
more flexibility. Due to internal complexity, it would be hard to
provide the same flexibility for each client API handle. But there's a
simple way to achieve basically the same thing: add an option that sends
log messages to the API handle, which would also be printed to the
terminal as by --msg-level.
The only change is that we don't disable this logic if the terminal is
disabled. Instead we check for this before the message is output, which
in theory can lower performance if messages are being spammed. It could
be handled with some more effort, but the gain would be negligible.
OpenSSL and GnuTLS are still causing this problem (although FFmpeg could
be blamed as well - but not really). In particular, it was happening to
libmpv users and in cases the pseudo-gui profile is used. This was
because all signal handling is in the terminal code, so if terminal is
disabled, it won't be set. This was obviously a questionable shortcut.
Avoid further problems by always blocking the signal. This is done even
for libmpv, despite our policy of not messing with global state.
Explicitly document this in the libmpv docs. It turns out that a version
bump to 1.17 was forgotten for the addition of MPV_FORMAT_BYTE_ARRAY, so
document that change as part of 1.16.
The client API (libmpv) and encoding (--o) have slightly different
defaults from the command line player. Instead of doing a bunch of calls
to set the options explicitly, use profiles. This is simpler and has the
advantage that they can be listed on command line (instead of possibly
forcing the user to find and read the code to know all the details).
This will be used in the following commit, which adds screenshot_raw.
The reasoning is that this will be better for binding scripting
languages.
One could special-case the screenshot_raw commit and define fixed
semantics for passing through a pointer using the current API, like
formatting a pointer as string. But that would be ridiculous and
unclean.
Basically, the idea behind the vp parameter is broken - I guess the
intention was to enable rendering to a specific subrectangle of the
target framebuffer, but there's nothing to specify the actual target
rectangle (the VO will still clear e.g. the borders between video and
framebuffer borders).
We're not going to keep the current semantics either with the upcoming
rework of vo_opengl, so declare this for broken. Maybe we can introduce
a function later which does this properly.
Move the command line parsing and some other things to the common init
routine shared between command line player and client API. This means
they're using almost exactly the same code now.
The main intended side effect is that the client API will load mpv.conf;
though still only if config loading is enabled.
(The cplayer still avoids creating an extra thread, passes a command
line, and prints an exit status to the terminal. It also has some
different defaults.)
This does what it's documented to do.
The implementation reuses the code in mpv_detach_destroy(). Due to the
way async requests currently work, just sending a synchronous dummy
request (like a "ignore" command) would be enough to ensure
synchronization, but this code will continue to work even if this
changes.
The line "ctx->event_mask = 0;" is removed, but it shouldn't be needed.
(If a client is somehow very slow to terminate, this could silence an
annoying queue overflow message, but all in all it does nothing.)
Calling mpv_wait_async_requests() and mpv_wait_event() concurrently is
in theory allowed, so change pthread_cond_signal() to
pthread_cond_broadcast() to avoid missed wakeups.
As requested in issue #1542.
Before this, we merely printed a message to the terminal. Now the API
user can determine this properly. This might be important for API users
which somehow maintain complex state, which all has to be invalidated if
(state-changing) events are missing due to an overflow.
This also forces the client API user to empty the event queue, which is
good, because otherwise the event queue would reach the "filled up"
state immediately again due to further asynchronous events being added
to the queue.
Also add some minor improvements to mpv_wait_event() documentation, and
some other minor cosmetic changes.
