Most of these demuxers and decoders are provided in better form by
libav, while the mplayer builtin ones are essentially unmaintained. The
only legimitate use case for not using the libav ones was working around
libav bugs or bugs related to the way mplayer uses libav. Instead of
trying to keep dead code alive, development effort should go into
improving libav or the mplayer libav glue code.
Note that the libav demuxer have been preferred over the mplayer builtin
ones for a while in mplayer2. There were some exceptions: playing DVDs
with dvdnav or playing network sources. (That's because some stream
modules and network.c requested explicit file formats, such as
DEMUXER_TYPE_MPEG_PS, which mapped to builtin demuxers.) With this
commit, they are switched to use libav. One caveat is that the requested
format is not passed to libavformat, instead we rely on the auto probing
to select the correct libav demuxer (see code in demux_open_stream()).
mplayer had three ways of enabling CPU specific assembler routines:
a) Enable them at compile time; crash if the CPU can't handle it.
b) Enable them at compile time, but let the configure script detect
your CPU. Your binary will only crash if you try to run it on a
different system that has less features than yours.
This was the default, I think.
c) Runtime detection.
The implementation of b) and c) suck. a) is not really feasible (it
sucks for users). Remove all code related to this, and use libav's CPU
detection instead. Now the configure script will always enable CPU
specific features, and disable them at runtime if libav reports them
not as available.
One implication is that now the compiler is always expected to handle
SSE (etc.) inline assembly at runtime, unless it's explicitly disabled.
Only checks for x86 CPU specific features are kept, the rest is either
unused or barely used.
Get rid of all the dump -mpcu, -march etc. flags. Trust the compiler
to select decent settings.
Get rid of support for the following operating systems:
- BSD/OS (some ancient BSD fork)
- QNX (don't care)
- BeOS (dead, Haiku support is still welcome)
- AIX (don't care)
- HP-UX (don't care)
- OS/2 (dead, actual support has been removed a while ago)
Remove the configure code for detecting the endianness. Instead, use
the standard header <endian.h>, which can be used if _GNU_SOURCE or
_BSD_SOURCE is defined. (Maybe these changes should have been in a
separate commit.)
Since this is a quite violent code removal orgy, and I'm testing only
on x86 32 bit Linux, expect regressions.
This enables playing URLs from libquvi supported streaming sites
directly, e.g. "mplayer http://www.youtube.com/watch?v=...."
Anything opened with mplayer is checked with libquvi. If it looks like
a URL of a supported streaming site, libquvi is used to extract the
media URL, which is then passed to the lower level mplayer code
instead of the HTML URL. Hopefully the libquvi URL checker works well
enough that it doesn't cause any problems with normal URLs, files, or
whatever else mplayer's stream layer accepts.
Add the --libquvi-format option. the option value is directly passed to
libquvi as requested format. The only values that seem to work for any
streaming site seem to be "best" (best quality) and "default" (lowest
quality). The mplayer option defaults to "best" (overriding libquvi's
default).
Outstanding issues:
- Does libquvi checking every opened file really not cause problems?
Should there be a runtime option to disable libquvi use?
(Probably not an issue.)
- Should we check/set the supported protocol? By default libquvi has
support for all protocols enabled. In the worst case, it might return
an URL using a protocol not supported by mplayer, even though it
could extract URLs with other protocols too.
(Probably not an issue.)
- Somehow export metadata (like media title) to the mplayer frontend?
Conflicts:
.gitignore
bstr.c
cfg-mplayer.h
defaultopts.c
libvo/video_out.c
The conflict in bstr.c is due to uau adding a bstr_getline function in
commit 2ba8b91a97. This function already existed in this branch.
While uau's function is obviously derived from mine, it's incompatible.
His function preserves line breaks, while mine strips them. Add a
bstr_strip_linebreaks function, fix all other uses of bstr_getline, and
pick uau's implementation.
In .gitignore, change vo_gl3_shaders.h to use an absolute path
additional to resolving the merge conflict.
There was some confusion about the "flags" field in demuxer packets.
Demuxers set it to either 1 or 0x10 to indicate a keyframe (and the
field was not used to indicate anything else). This didn't cause
visible problems because nothing read the value. Replace the "flags"
field with a boolean "keyframe" field. Set AV_PKT_FLAG_KEY based on
this field in packets fed to libavcodec video decoders (looks like PNG
and ZeroCodec are the only ones which depend on values from demuxer;
previously this was hardcoded to true for PNG).
Make demux_mf set the keyframe field in every packet. This matters for
PNG files now that the demuxer flag is forwarded to libavcodec.
Fix logic setting the field in demux_mkv. It had probably not been
updated when adding SimpleBlock support. This probably makes no
difference for any current practical use.
Conflicts:
bstr.c
bstr.h
libvo/cocoa_common.m
libvo/gl_common.c
libvo/video_out.c
mplayer.c
screenshot.c
sub/subassconvert.c
Merge of cocoa_common.m done by pigoz.
Picking my version of screenshot.c. The fix in commit aadf1002f8 will
be redone in a follow-up commit, as the original commit causes too many
conflicts with the work done locally in this branch, and other work in
progress.
The per-CD info will be printed on playback start, per-track info when
a track is played. (This is not a technical restriction, and just goes
along with the existing code.)
The following fields are not included in output, because these are
supposedly binary: CDTEXT_DISCID, CDTEXT_GENRE, CDTEXT_SIZE_INFO,
CDTEXT_TOC_INFO, CDTEXT_TOC_INFO2.
Fix cdda speed default value, range and use more robust condition.
Based on patch by Ingo Brückl [ib wupperonline de].
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34458 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not call paranoia_overlapset with 0, it actually causes cdparanoia to just hang.
Instead use it to set/unset PARANOIA_MODE_OVERLAP.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34459 b3059339-0415-0410-9bf9-f77b7e298cf2
Fail if trying to seek beyond the last chapter, not just if it is beyond the end of the disc.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34460 b3059339-0415-0410-9bf9-f77b7e298cf2
cdda: set position to an actual EOF position when we set EOF.
This avoids some inconsistency like the stream indicating EOF but
a read still returning more data.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34462 b3059339-0415-0410-9bf9-f77b7e298cf2
Allow PARANOIA_MODE_FULL with skipping.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34467 b3059339-0415-0410-9bf9-f77b7e298cf2
Don't call paranoia_modeset() for PARANOIA_MODE_DISABLE.
cdparanoia destroys start sector information after such a call.
Since it is pointless without setting a mode anyway, don't do it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34468 b3059339-0415-0410-9bf9-f77b7e298cf2
Add comment to a condition that is just a hack around a cdparanoia bug.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34472 b3059339-0415-0410-9bf9-f77b7e298cf2
Add checks for errors in stream_cdda's get_track_by_sector().
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34495 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix seeking beyond EOF in stream_cdda to work with cache.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34577 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
command.c
libao2/ao_alsa.c
libao2/ao_dsound.c
libao2/ao_pulse.c
libao2/audio_out.h
mixer.c
mixer.h
mplayer.c
Replace my mixer changes with uau's implementation, which is based on
my code.
Commit 30afc64532 ("stream_ffmpeg: switch to libavformat avio
API") somehow contained a nonsense line which broke the control()
function. Fix. Also add avformat_network_init() to central libav
initialization code to avoid warnings.
struct station_elem_s had a field "name[8]", but the rest of the code
used PVR_STATION_NAME_SIZE as field size in snprintf and some other
calls accessing the field. Change the field size to
PVR_STATION_NAME_SIZE so it matches the accesses.
The per-CD info will be printed on playback start, per-track info when
a track is played. (This is not a technical restriction, and just goes
along with the existing code.)
The following fields are not included in output, because these are
supposedly binary: CDTEXT_DISCID, CDTEXT_GENRE, CDTEXT_SIZE_INFO,
CDTEXT_TOC_INFO, CDTEXT_TOC_INFO2.
Fix cdda speed default value, range and use more robust condition.
Based on patch by Ingo Brückl [ib wupperonline de].
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34458 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not call paranoia_overlapset with 0, it actually causes cdparanoia to just hang.
Instead use it to set/unset PARANOIA_MODE_OVERLAP.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34459 b3059339-0415-0410-9bf9-f77b7e298cf2
Fail if trying to seek beyond the last chapter, not just if it is beyond the end of the disc.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34460 b3059339-0415-0410-9bf9-f77b7e298cf2
cdda: set position to an actual EOF position when we set EOF.
This avoids some inconsistency like the stream indicating EOF but
a read still returning more data.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34462 b3059339-0415-0410-9bf9-f77b7e298cf2
Allow PARANOIA_MODE_FULL with skipping.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34467 b3059339-0415-0410-9bf9-f77b7e298cf2
Don't call paranoia_modeset() for PARANOIA_MODE_DISABLE.
cdparanoia destroys start sector information after such a call.
Since it is pointless without setting a mode anyway, don't do it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34468 b3059339-0415-0410-9bf9-f77b7e298cf2
Add comment to a condition that is just a hack around a cdparanoia bug.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34472 b3059339-0415-0410-9bf9-f77b7e298cf2
Add checks for errors in stream_cdda's get_track_by_sector().
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34495 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix seeking beyond EOF in stream_cdda to work with cache.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34577 b3059339-0415-0410-9bf9-f77b7e298cf2
Windows uses a legacy codepage for char* / runtime functions accepting
char *. Using UTF-8 as the codepage with setlocale() is explicitly
forbidden.
Work this around by overriding the MSVCRT functions with wrapper
macros, that assume UTF-8 and use "proper" API calls like _wopen etc.
to deal with unicode filenames. All code that uses standard functions
that take or return filenames must now include osdep/io.h. stat()
can't be overridden, because MinGW-w64 itself defines "stat" as a
macro. Change code to use use mp_stat() instead.
This is not perfectly clean, but still somewhat sane, and much better
than littering the rest of the mplayer code with MinGW specific hacks.
It's also a bit fragile, but that's actually little different from the
previous situation. Also, MinGW is unlikely to ever include a nice way
of dealing with this.
Some of the code, especially the dshow and windows codec loader parts,
are extremely hacky and likely full of bugs. The goal is merely getting
rid of warnings that could obscure more important warnings and actual
bugs, instead of fixing actual problems. This reduces the number of
warnings from over 500 to almost the same as when compiling on Linux.
Note that many problems stem from using the ancient wine-derived
windows headers. There are some differences to the "proper" windows
header. Changing the code to compile with the proper headers would be
too much trouble, and it still has to work on Unix.
Some of the changes might actually break compilation on legacy MinGW,
but we don't support that anymore. Always use MinGW-w64, even when
compiling to 32 bit.
Fixes some warnings in the win32 loader code on Linux too.
Remove the private bswap and intreadwrite.h implementations and use
libavutil headers instead.
Originally these headers weren't publicly installed by libavutil at
all. That already changed in 2010, but the pure C bswap version in
installed headers was very inefficient. That was recently (2011-12)
improved and now using the public bswap version probably shouldn't
cause noticeable performance problems, at least if using a new enough
compiler.
Change various code to use the latest Libav API. The libavcodec
error_recognition setting has been removed and replaced with different
semantics. I removed the "--lavdopts=er=<value>" option accordingly,
as I don't think it's widely enough used to be worth attempting to
emulate the old option semantics using the new API. A new option with
the new semantics can be added later if needed.
Libav dropped APIs that were necessary with all Libav versions
until quite recently (like setting avctx->age), and it would thus not
be possible to keep compatibility with previous Libav versions without
adding workarounds. The new APIs also had some bugs/limitations in the
recent Libav release 0.8, and it would not work fully (at least some
avcodec options would not be set correctly). Because of those issues,
this commit makes no attempt to maintain compatibility with anything
but the latest Libav git head. Hopefully the required fixes and
improvements will be included in a following Libav point release.
stream_ffmpeg was using the libavformat URLContext API. This API has
been deprecated (for public use at least) in libavformat. Switch to
the AVIOContext API.
Require versions of the Libav libraries corresponding to Libav release
0.7. These are:
libavutil 51.7.0
libavcodec 53.5.0
libavformat 53.2.0
libswscale 2.0.0
libpostproc 52.0.0
Also disable the fallback to simple header check if these libraries
could not be found with pkg-config; now compiling without pkg-config
support for these always requires explicitly setting --enable-libav
and any needed compiler/linker flags. The simple check would have let
compilation proceed even if a version mismatch was detected.
After commit 39e373aa8d ("options: allocate dynamic options with
talloc") dynamically allocated options must be allocated with talloc.
stream_cdda allocated a string used with the option machinery using
strdup(). Fix. Also silence a warning.
Command line options like "-foo xyz" are ambiguous: "xyz" may be a
parameter to the option "foo" or an unrelated argument. Instead of
relying on the struct m_config mode field (commandline/file) pass
parameters to specify ambiguous mode explicitly. Meant for "--foo"
options which are never ambiguous on command line either.
Do the global initialization of libavcodec and libavformat
(avcodec_register_all(), av_register_all()) immediately on program
startup and remove the initialization calls from various individual
modules that use libavcodec/libavformat functionality.
Improve checks for when to try reconnecting to be more thorough and
readable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33809 b3059339-0415-0410-9bf9-f77b7e298cf2
Reindent, add empty lines.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33810 b3059339-0415-0410-9bf9-f77b7e298cf2
Fixes a possible endless loop with HTTP files where seeking to
the very end returns the full file again instead of e.g. an error.
Apache/2.2.4 seems to show this behaviour.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33808 b3059339-0415-0410-9bf9-f77b7e298cf2
Ensure we do not add strange values to amount of buffered bytes
read on error.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33807 b3059339-0415-0410-9bf9-f77b7e298cf2
Signal EOF vs. error also via streaming control API (not yet evaluated).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33806 b3059339-0415-0410-9bf9-f77b7e298cf2
When handling STREAM_CTRL calls for the cached stream, do not modify
the return parameter if the underlying stream returns an error for the
operation.
Avoids issues with some places that don't check the return
value of stream_control.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33802 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove condition that is now always true.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33803 b3059339-0415-0410-9bf9-f77b7e298cf2
Do a proper calculation of free RAM to be used as V4L buffers.
The code uses sysinfo to query the available RAM, however it used
ancient form available in some early development 2.3.x kernels.
Newer form reports the size in memory units (usually same as page size),
as result the code would fall back on 2 buffers even on multi GB system.
The commit does: Improve the check in configure to ensure that we
do use sysinfo struct with present mem_unit. Use free RAM instead of
total RAM (to avoid swapping). Tweak memory constants and simplify code.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33732 b3059339-0415-0410-9bf9-f77b7e298cf2
tvi_dshow: Mark functions not used outside of the file as static.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33706 b3059339-0415-0410-9bf9-f77b7e298cf2
tvi_dshow: Adjust mp_msg printf conversion specifier to avoid warnings
stream/tvi_dshow.c:2807: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'long unsigned int'
stream/tvi_dshow.c:2821: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'long unsigned int'
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33710 b3059339-0415-0410-9bf9-f77b7e298cf2
Change code to allow STREAM_CTRL_GET_CURRENT_TIME with cache enabled.
Due to that time being from what is currently read into the cache it
is unfortunately somewhat inaccurate and unsmooth, however for streams
that do have stream timestamps it is till a lot better than going by
the demuxer alone.
In particular it fixes bug #1081, when starting a DVD with -chapter
following seeks would be relative to the start of the DVD instead
of the current position.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33605 b3059339-0415-0410-9bf9-f77b7e298cf2
