commit fa9e1f06f tried to move signal unsafe operations out of
signal handlers but mistakenly introduced a race. before,
sigtstop would process the following in order:
0. do_deactivate_getch2();
1. raise(SIGTSTP)
that commit moved 0 out of the signal handler (due to it being
unsafe) but kept 1 in there. this may mess up the ordering of
these operations. this commit moves everything out of the
handler so that things happen in proper order.
since things are now moved out of the handler, SA_RESETHAND is
no longer being applied to SIGTSTP. since that can result in
races if multiple signals are delivered faster than we can
respond to them.
This can cause mpv to abruptly quit without following the proper uninit
process when a second `SIGTERM` or `SIGQUIT` is sent and mpv
didn't quit on the first one already. This is because the default action
for these signals is to terminate the program immediately, similar to
`SIGKILL`, and `SA_RESETHAND` resets the `quit_request_sighandler` to
`SIG_DFL` for the default action.
Also keep the `SA_RESETHAND` flag for SIGINT because the current
behavior is to quit after receiving two Ctrl+C no matter what, this is
probably convenient and worth keeping.
This change is because some tools (e.g. GNU timeout) send SIGTERM twice
after the timeout period.
An easy way to reproduce is with `timeout 1 mpv [...]` where mpv would
quit abruptly anywhere from half the time to once every 50 attempts
depending on your luck.
24270b8587 disabled the cursor while mpv is running, but if you send mpv
to the background, it is not re-enabled until you run bg, and not even
after that if mpv is paused. Fix this by enabling the cursor from the
SIGTSTP handler.
I'd like some names to be more descriptive, but to work with 15 chars
limit we have to make some sacrifice.
Also because of the limit, remove the `mpv/` prefix and prioritize
actuall thread name.
This fixes warnings generated for `-Wunused-result` when mpv is built
with `-O1 -D_FORTIFY_SOURCE=1` or higher on clang since read/write
functions are declared with the `warn_unused_result` attribute.
Cast to void to avoid these warnings.
there are currently some silly data-races in the stop/cont sighandler
due to the fact that the signal handler might get invoked in a different
thread.
this changes those sighandlers to a pipe-based approach similar to the
existing "quit" sighandler.
tio_orig and tio_orig_set are being touched inside of signal handler
which might be invoked from another thread - which makes this a data
race.
there's no real reason to set tio_orig inside of do_activate_getch2()
which is registered as a signal handler. just set it once, in
terminal_init(), before any signal handlers come in play.
this also allows removing the tio_orig_set variable completely.
do_deactivate_getch2() touches some global variables which *might have*
been fine if the terminal thread was the one that received the signal
but AFAIK which thread will handle the signal is not well defined.
in my case, when quitting mpv with CTRL+C the main thread receives the
signal rather than the terminal thread and touches those globals without
synchronization. caught by ThreadSanitizer.
the solution is to move the do_deactivate_getch2() call outside of the
signal handler.
Originally, this was added as purely a shim for macOS. However since we
want to do high resolution polling which is not neccesarily available on
all platforms, making this a generic wrapper for poll functions is
useful so rename it.
the reason for checking `EBADF|EINVAL` specifically is unknown. but it's
clearly not working as intended since it can cause issues like #11795.
instead of checking for "bad errors" check for known "good errors" where
we might not want to break out. this includes:
* EINTR: which can happen if read() is interrupted by some signal.
* EAGAIN: which happens if a non-blocking fd would block. `tty_in` is
_not_ non-blocking, so EAGAIN should never occur here. but it's added
just in case that changes in the future.
Fixes: https://github.com/mpv-player/mpv/issues/11795
Closes: https://github.com/mpv-player/mpv/pull/11805
If an unknown ESC sequence is detected where an ASCII char <X> follows
the ESC, mpv interprets it as ALT+<X>, which is the traditional
terminal encoding of ALT+letter.
However, if <X> is '[' then it's a CSI sequence which continues after
the '[', and has its own termination rules (can be many chars).
Previously, mpv interpreted unknown CSI sequences as (incorrect) ALT+[
followed by (incorrect) "keys" from the rest of the sequence.
In this commit, if a unknown CSI sequence is detected, mpv ignores
exactly the complete sequence.
When using "stty susp ''" to disable sending the TSTP signal with ^Z,
mpv didn't recognize ^Z correctly in the terminal:
[input] No key binding found for key 'Ctrl+2'.
Because ASCII 26 (^Z) and above were incorrectly considered ^<NUMBER>.
This commit moves the cutoff between letters/numbers from 25 to 26 so
that ^Z is now detected correctly as ^<LETTER>.
Additionally, it rephrases the ^<NUMBER> formula for clarity.
When mpv is in the background because it was started with
`mpv foo.mp3 &`, or the user did ctrl+z bg, and is then brought to the
foreground with fg, it buffers input until you press enter. This makes
it accept input almost immediately. Having a short interval isn't
important, since input is buffered until the next loop iteration.
Closes#8120.
In the recent terminal commit, I "compressed" the read() error handling,
and messed it up. The return value could be -1 for other non-fatal
errors (such as EIO when trying to read while backgrounded), which
resulted in buf.len getting messed up.
Fixes: 602384348e
Due to Unix being legacy garbage, it's not possible to safely detect the
ESC key on terminal. The key sequences are ambiguous. The code for the
ESC key also starts the sequences for other special keys.
Until now, you needed to hit ESC twice for it to be recognized.
Attempt to handle this better by using a timeout to detect the key. If
ESC is in the input buffer, but nothing else arrived after a timeout,
assume it's the ESC key. I think this is the method vim uses. Currently,
the timeout is set at 100ms. This is hardcoded and cannot be changed.
It's possible that this causes problems on slow ssh connections or so.
I'm not sure what exactly happens if you manage to get ESC + another
normal key into the input buffer. If it's a known sequence, it will be
matched and interpreted as such. If not, it'll probably be discarded.
zsh often sets DECCKM (i.e. Cursor Key Mode) meaning the arrow keys
send `SS3 A/B/C/D` instead of `CSI A/B/C/D`.
Add `key_entry` definitions for this alongside the existing DECCKM Reset
definitions.
Avoids 100% CPU usage due to terminal code retrying read(). Seems like
this was "forgotten" (or there was somehow the assumption poll() would
not signal POLLIN anymore).
Fixes#5842.
Calling do_deactivate_getch2 before joining the terminal thread could
lead to breakage if the terminal thread got another interation in before
it was signaled to stop.
This also addresses a minor error with the order in which things are
initialized - getch2_poll would previously call tcgetpgrp(tty_in) before
tty_in was initialized, which did not lead to broken behavior, but was
not correct either.
Fixes#5195
POSIX permits select() to modify the timeout, which can happen on the
Linux implementation. This can reset the timeout, which spins this into
a tight loop. A timeout isn't necessary in the first place, so just use
NULL instead.
While this is perfectly OK on Unix, it causes annoying valgrind
warnings, and might be otherwise confusing to others.
On Windows, the runtime can actually abort the process if this is
called.
push.c part taken from a patch by Pedro Pombeiro.
All authors of the current code have agreed.
The code probably originates from a software named GySmail (as the
copyright header indicates). As far as I can tell, it was written by
Arpi (who has agreed), possibly with unknown co-authors. This is most
likely OK, as none of the original code is around anymore anyway. I
could not find a working download of GySmail, that actually contained
the original getch2.c code.
This also has a wild history of random people adding ifdef guards to
control ioctl() vs. tcgetattr() calls. (See for example 2b1310abba4c1.)
Later, the ioctl() was removed in favor of the POSIX tcgetattr(), and
the ifdeffery was removed. So these people were not contacted.
So client API users don't have to care about whether to set this before
or after mpv_initialize().
We still don't enable terminal at any point before mpv_initialize(),
because reasons.
This also subtly changes some behavior how terminal options are applied
while parsing. This essentially reverts the behavior as it was reported
in issue #2588. Originally, I was hoping to get rid of the pre-parse
option pass, but it seems this is absolutely not possible due to the way
config and command line parsing are entangled. Command line options take
priority over configfile options, so they have to be applied later - but
we also want to apply logging and terminal options as specified on the
command-line, but _before_ parsing the config files. It has to be this
way to see config file error messages on the terminal, or to hide them
if --no-terminal is used. libmpv considerations also factor into this.
Until now, the terminal thread always sent a quit command if the
terminal thread was torn down (whether it happened via terminal_uninit()
or a quit signal). This is not so good if we want to enable toggling
terminal use at runtime, since disabling the terminal would always make
the player quit. So we want terminal_uninit() not to send quit.
This can be easily fixed by using the "death byte" sent to the pipe used
for thread tear-down to indicate whether it was caused by a signal or
terminal_uninit().
For clang, it's enough to just put (void) around usages we are
intentionally ignoring the result of.
Since GCC does not seem to want to respect this decision, we are forced
to disable the warning globally.
This was originally done for zsh; but zsh can manage the terminal state
correctly when foregrounding/backgrounding applications if you enable it
with "ttyctl -f". So I see no reason to wake up the mpv process once
every second anymore.
mpv usually sets the terminal to non-canonical mode (which in particular
disables line buffering). But the old mode is restored if the process is
not foregrounded. This is supposed to make mpv behave nicer when it is
backgrounded.
getch2_poll() enables canonical mode. Unfortunately, this was only
called after the poll timeout elapsed, so non-canonical mode is first
enabled after about a second after program start. Fix this by moving the
poll call before the timeout.
(As far as we're aware, there's no event-based way to determine when the
FD's process group changes, thus we're polling.)
OpenSSL and GnuTLS are still causing this problem (although FFmpeg could
be blamed as well - but not really). In particular, it was happening to
libmpv users and in cases the pseudo-gui profile is used. This was
because all signal handling is in the terminal code, so if terminal is
disabled, it won't be set. This was obviously a questionable shortcut.
Avoid further problems by always blocking the signal. This is done even
for libmpv, despite our policy of not messing with global state.
Explicitly document this in the libmpv docs. It turns out that a version
bump to 1.17 was forgotten for the addition of MPV_FORMAT_BYTE_ARRAY, so
document that change as part of 1.16.
The function terminal_in_background() reports whether the player was
backgrounded. In this case, we don't want to annoy the user by still
printing the status to stderr. If no terminal interaction is assumed,
this mechanism is disabled, and stderr is always used. The read_terminal
variable signals this case.
Oddly, just redirecting stderr will disable output to stderr, because
the background check with tcgetpgrp() is done on stderr, but
read_terminal is still true (because that one depends on stdin and
stdout).
Explicitly disable this mechanism if --no-input-terminal is used by
setting read_terminal to true only if terminal input is actually
initialized.
I noticed that the IPC code does not use MSG_NOSIGNAL or SO_NOSIGPIPE.
The former is "only" POSIX 2008 and also requires switching to sendto(),
while the latter is even less portable.
Not going to bother with this obsolete 80ies crap, just block SIGPIPE,
and instruct client API users to do the same.
Avoids a crash if OpenSSL tries to write to a broken connection with
write().
Obviously OpenSSL really should use send() with MSG_NOSIGNAL, but for
some reason it doesn't. This should probably be considered an OpenSSL
bug, but since in this case we "own" the process, there is no harm in
ignoring the signal.
This is not done with libmpv, because as a library we don't want to mess
with global state. It's also not done if terminal handling is disabled -
this is a bit arbitrary, but I don't care much.
When mpv is backgrounded initially (via & in the shell), do no longer
change terminal settings on startup. This fixes broken local echo after
launching a backgrounded mpv.
Doing that doesn't make sense anyway: it's meant for interactive input,
and if the output of the player is not on the terminal, how will you
interact with it?
It was also quite in the way when trying to read verbose output with
e.g. less while the player was running, because the player would grab
half of all input meant for less (simply because stdin is still
connected to the terminal).
Remove the now redundant special-casing of pipe input.
Especially with other components (libavcodec, OSX stuff), the thread
list can get quite populated. Setting the thread name helps when
debugging.
Since this is not portable, we check the OS variants in waf configure.
old-configure just gets a special-case for glibc, since doing a full
check here would probably be a waste of effort.
