A longstanding pain point of the drm VOs is the relative lack of state
sharing. While drm_common does provide some sharing, it's far less than
other platforms like x11 or wayland. What we do here is essentially copy
them by creating a new vo_drm_state struct and using it in vo_drm and
context_drm_egl. Much of the functionality that was essentially
duplicated in both VOs/contexts is now reduced simple functions in
drm_common. The usage of the term 'kms' was also mostly eliminated since
this is libdrm nowadays from a userspace perspective.
The legacy DRM API adds some complexity to the DRM code. There
are only 4 drivers that do not support the DRM Atomic API:
1. radeon (early GCN amd cards)
2. gma500 (ancient intel GPUs)
3. ast (ASPEED SoCs)
4. nouveau
Going forward, new DRM drivers will be guaranteed to support the atomic
API so this is a safe removal.
ae768a1e14 forgot to bump the required
libdrm version however Debian 11 just barely misses the requirement,
which is a good reason not to require it unconditionally anyway.
Avoids another pitfall on systems where the first card has a primary
node but is not capable of KMS. With this change --drm-context=drm
should work correctly out-of-the-box in all cases.
So it turns out that mpv already has an mp_tag_str which makes a
readable string out of fourccs (drm formats are these).
drm_format_string, on the other hand, has a ton of baggage with having
to check different libdrm versions for certain headers, adding
compile-time defines (because there are no version defines in the libdrm
headers), etc. It's a lot simpler to just use what mpv already has and
it returns what you actually care about: i.e. is this format supported
or not. Fixes https://github.com/mpv-player/mpv-build/issues/184
This driver makes use of dmabuffer and viewporter interfaces
to enable efficient display of vaapi surfaces, avoiding
any unnecessary colour space conversion, and avoiding scaling
or colour conversion using GPU shader resources.
Variable Refresh Rate (VRR), aka Freesync or Adaptive Sync can be used
with DRM by setting the VRR_ENABLED property on a crtc if the
connector reports that it is VRR_CAPABLE. This is a useful feature
for us as it is common to play 24/25/50 fps content on displays that
are nominally locked to 60Hz. VRR can allow this content to play at
native framerates.
This is a simple change as we just need to check the capability
and set the enabled property if requested by the user. I've defaulted
it to disabled for now, but it might make sense to default to auto
in the long term.
The new GBM supporting nvidia drivers declare support for 10bit
surfaces using BGR ordering, rather than RGB, so add support for them.
We've also seen examples of hardware supporting BGR8888 but not
RGB8888 so let's support those too.
Of course, the nvidia EGL driver doesn't publish support for any 10bit
formats so you can't actually do 10bit display. Perhaps they'll
eventually fix that.
Based on the idea behind emersion's change to drm_info
(869e789a64).
Lets us by default skip devices which are not capable of doing what
the DRM master output requires (not primary devices), as some devices
have card0 actually not be such.
Negative part is that the number given to drm-connector is no
longer a direct mapping against a file name.
Today, validation is only possible for string type options. But there's
no particular reason why it needs to be restricted in this way, and
there are potential uses, to allow other options to be validated
without forcing the option to have to reimplement parsing from
scratch.
The first part, simply making the validation function an explicit
field instead of overloading priv is simple enough. But if we only do
that, then the validation function still needs to deal with the raw
pre-parsed string. Instead, we want to allow the value to be parsed
before it is validated. That in turn leads to us having validator
functions that should be type aware. Unfortunately, that means we need
to keep the explicit macro like OPT_STRING_VALIDATE() as a way to
enforce the correct typing of the function. Otherwise, we'd have to
have the validator take a void * and hope the implementation can cast
it correctly.
For help, we don't have this problem, as help doesn't look at the
value.
Then, we turn validators that are really help generators into explicit
help functions and where a validator is help + validation, we split
them into two parts.
I have, however, left functions that need to query information for both
help and validation as single functions to avoid code duplication.
In this change, I have not added an other OPT_FOO_VALIDATE() macros as
they are not needed, but I will add some in a separate change to
illustrate the pattern.
On FreeBSD and DragonFly kernel checks if `frsig` is valid and aborts
with `EINVAL` if not. However, `frsig` was never implemented.
$ build/mpv --gpu-context=drm /path/to/video.mkv
[...]
[vo/gpu] VT_SETMODE failed: Invalid argument
[vo/gpu/opengl] Failed to set up VT switcher. Terminal switching will be unavailable.
[...]
$ ./waf configure
Checking for vt.h : no
Checking for DRM : vt.h not found
[...]
../test.c:1:10: fatal error: 'sys/vt.h' file not found
#include <sys/vt.h>
^~~~~~~~~~
$ build/mpv --gpu-context=drm /path/to/video.mkv
Error parsing option gpu-context (option parameter could not be parsed)
Setting commandline option --gpu-context=drm failed.
Exiting... (Fatal error)
Change all OPT_* macros such that they don't define the entire m_option
initializer, and instead expand only to a part of it, which sets certain
fields. This requires changing almost every option declaration, because
they all use these macros. A declaration now always starts with
{"name", ...
followed by designated initializers only (possibly wrapped in macros).
The OPT_* macros now initialize the .offset and .type fields only,
sometimes also .priv and others.
I think this change makes the option macros less tricky. The old code
had to stuff everything into macro arguments (and attempted to allow
setting arbitrary fields by letting the user pass designated
initializers in the vararg parts). Some of this was made messy due to
C99 and C11 not allowing 0-sized varargs with ',' removal. It's also
possible that this change is pointless, other than cosmetic preferences.
Not too happy about some things. For example, the OPT_CHOICE()
indentation I applied looks a bit ugly.
Much of this change was done with regex search&replace, but some places
required manual editing. In particular, code in "obscure" areas (which I
didn't include in compilation) might be broken now.
In wayland_common.c the author of some option declarations confused the
flags parameter with the default value (though the default value was
also properly set below). I fixed this with this change.
Seems like some drivers only increment msc every other page flip when
running in interlaced mode (I'm looking at you nouveau). I.e. it seems
to be incremented at the frame rate, rather than the field rate.
Obviously we can't work with this, so shame the driver and bail.
On intel this isn't an issue, as msc is incremented at field rate
there.
This means presentation feedback won't work correctly in interlaced
modes with those drivers, but who in their right mind uses an
interlaced mode these days, anyway?
This allows to select the drm mode using a string specification. You
can either select the the preferred mode, the mode with the highest
resolution, by specifying WxH[@R] or by its index in the list of modes
as before.
This was implemented by using OPT_STRING_VALIDATE for drm-mode,
instead of OPT_INT. Using a string here also prepares for future
additions to drm-mode that aim to allow specifying a mode by its
resolution.
It is useful when debugging to be able to force atomic off, or as a
workaround if atomic breaks for some user. Legacy modesetting is less
likely to break by virtue of being a less complex API.
This commit bumps the libmpv version to 1.102
drm-osd-plane -> drm-draw-plane
drm-video-plane -> drm-drmprime-video-plane
drm-osd-size -> drm-draw-surface-size
"draw plane", as in the plane that OpenGL draws to, whether it be
video + OSD or just OSD.
"drmprime video plane", as in the plane used for hwdec video imported
via drmprime.
"draw surface size", as in the size of the surface used for the draw plane
The new names are invariant whether or not hwdec_drmprime_drm is being
used or not. The original naming was very confusing, as when doing
regular rendering (swdec or vaapi) the video would be displayed on the
"OSD plane", and the "Video plane" would remain unused.
Add general primary/overlay plane option to drm-osd-plane-id and
drm-video-plane-id, so that the user can just request any usable
primary or overlay plane for either of these two options. This should
be somewhat more user-friendly (especially as neither of these two
options currently have a useful help function), as usually you would
only be interested in the type of the plane, and not exactly which
plane gets picked.
The previous code did not save enough information about the old state,
and could end up changing what plane the fbcon:s FB got attached to,
or in worse case causing a blank screen (observed in some multi-screen
setups on Sandy Bridge).
In addition refactor the handling of drmModeModeInfo property blobs to
not leak, as well as enable reuse of already created blobs.
Inspired by kmscube, first try to pick the Encoder and CRTC already
associated with the selected Connector, if any. Otherwise try to find
the first matching encoder & CRTC like before.
The previous behavior had problems when using atomic
modesetting (crtc_setup_atomic) when we picked an Encoder & CRTC that
was currently being used by the fbcon together with another Encoder.
drmModeSetCrtc was able to "steal" the CRTC in this case, but using
atomic modesetting we do not seem to get this behavior automatically.
This should also improve behavior somewhat when run on a multi screen
setup with regards to deinit and VT switching (still sometimes you end
up with a blank screen where you previously had a cloned display of
your fbcon)
We are currently using primary / overlay planes drm objects, assuming that primary plane is osd and overlay plane is video.
This commit is doing two things :
- replace the primary / overlay planes members with osd and video planes member without the assumption
- Add two more options to determine which one of the primary / overlay is associated to osd / video.
- It will default osd to overlay and video to primary if unspecified
This patch adds
- DRM connector object to atomic context.
- fd property to the drm atomic object as well as a method to read blob type properties.
This allows to ensure that the proper connector is picked up, especially when specifying it
from the commandline, and also allows to make sure we're using the right one when embedding
with interop into an application.
That new API was introduced and allows to have several native resources.
Thisuses that mechanisma for drm resources rather than the deprecated
opengl-cb structs.
This patch therefore add two structs that can be used with the drm atomic interop.
- mpv_opengl_drm_params : which will hold all the drm handles
- mpv_opengl_drm_osd_size : which will hold osd layer size
This commit adds a drm-osd-size=WxH parameter to commandline which
allows to define the OSD plane dimension. OSD can be upscaled to
screen resolution when having OSD at video resolution is too heavy.
This is especially useful for UHD modes on embedded devices where
the GPU cannot handle UHD modes at a decent framerate.
By blocking the VT switcher signal in the VO thread we get less races
and other oddities.
This gets rid of tearing (at least for me) when VT switching with
--gpu-context=drm.
This introduces the option --drm-format (currently used only by
context_drm_egl, vo_drm implementation is pending) which allows you to
pick between a xrgb8888 or a xrgb2101010 visual for --gpu-context=drm.
Requires a recent mesa (18.0.0_rc4 or later) to work.
This also fixes a bug when using --gpu-context=drm on a 30bpp-enabled
mesa (allow_rgb10_configs set to true). Previously it would've set up
an XRGB8888 format at the DRM/GBM level, while a 30bpp EGLConfig would
be picked, resulting in a garbled image.
This commit allows to use the AV_PIX_FMT_DRM_PRIME newly introduced
format in ffmpeg that allows decoders to provide an AVDRMFrameDescriptor
struct.
That struct holds dmabuf fds and information allowing zerocopy rendering
using KMS / DRM Atomic.
This has been tested on RockChip ROCK64 device.
The printout of available modes that you can get with --drm-mode=-1
(with -vo drm or --opengl-backend=drm) does not include the refresh
rate in the printout, which is quite useful to know, if one is to
choose for instance 23.98, or 24 Hz for film material.
Signed-off-by: wm4 <wm4@nowhere>
I'm not sure what systems have <sys/poll.h> (maybe there are historical
reasons why some would), but POSIX defines <poll.h>. Although this code
is full of highly OS specific calls (like ioctl()), there's no reason
not to use the more standard include path.
- Change connector selection to accept human readable names (such as
eDP-1, HDMI-A-2) rather than arbitrary numbers.
- Change GPU selection to accept GPU number rather than device paths.
- Merge connector and GPU selection into one --drm-connector.
- Add support for --drm-connector=help.
- Add support for --drm-* in EGL backend.
- Refactor KMS; reduce state sharing across drm_common.
Reduces code duplication between OpenGL backend and DRM VO.
(The control() for OpenGL backend isn't sufficiently similar to the
VO's control() to consider merging it as a whole - I extracted only the
FPS code.)
For clang, it's enough to just put (void) around usages we are
intentionally ignoring the result of.
Since GCC does not seem to want to respect this decision, we are forced
to disable the warning globally.
Do this to make the license situation less confusing.
This change should be of no consequence, since LGPL is compatible with
GPL anyway, and making it LGPL-only does not restrict the use with GPL
code.
Additionally, the wording implies that this is allowed, and that we can
just remove the GPL part.
Christoph Heinrich