This was apparently useful for correct interlaced scaling (although I
don't know anyone who used this). It was rarely used (if at all), had an
inconvenient output format (packed YUV), and now has a better solution
in libavfilter (using the libavfilter "scale" filter via vf_lavfi).
There is no reason to keep this filter any longer.
It's entirely useless. I left it in for a while, because the analog TV
code had a transitional bug that could switch chroma planes, but it was
fixed long ago. It's also available in libavfilter.
If a file is unseekable (consider e.g. a http server without resume
functionality), but the stream cache is active, the player will enable
seeking anyway. Until know, client API user couldn't know that this
happens, and it has implications on how well seeking will work. So add a
property which exports whether this situation applies.
Fixes#1522.
This allows getting the log at all with --no-terminal and without having
to retrieve log messages manually with the client API. The log level is
hardcoded to -v. A higher log level would lead to too much log output
(huge file sizes and latency issues due to waiting on the disk), and
isn't too useful in general anyway. For debugging, the terminal can be
used instead.
The previous default ("no") seemed to be equivalent to "min" in practice
(though it might depend on the website, which is even worse).
Better just select the best stream by default.
This queries the _ICC_PROFILE property on the root window. It also tries
to reload the ICC when it changes, or if the mpv window changes the
monitor. (If multiple monitors are covered, mpv will randomly select one
of them.)
The official spec is a dead link on freedesktop.org, so don't blame me
for any bugs.
Note that this assumes that Xinerama screen numbers match the way mpv
enumerates the xrandr monitors. Although there is some chance that this
matches, it most likely doesn't, and we actually have to do complicated
things to map the screen numbers. If it turns out that this is required,
I will fix it as soon as someone with a suitable setup for testing the
fix reports it.
Seems like several people agree that it's a good filter for downscaling.
Setting this option by default may also prevent people from accidentally
using an unsuitable filter for downscaling by setting "scale" and
without being aware of the impliciations (maybe). On the other hand,
this change is not strictly backwards compatible for the same reasons.
Also, allow disabling this option with scale-down="" (before this, not
setting it was the only way to do this - not possible anymore if it's
set by default). This is what the change in handle_scaler_opt() does.
New command `mouse <x> <y> [<button> [single|double]]` is introduced.
This will update mouse position with given coordinate (`<x>`, `<y>`),
and additionally, send single-click or double-click event if `<button>`
is given.
vo.c queried the VO at initialization whether it wants to be updated on
every display frame, or every video frame. If the smoothmotion option
was changed at runtime, the rendering mode in vo.c wasn't updated.
Just let vo_opengl set the mode directly. Abuse the existing
vo_set_flip_queue_offset() function for this.
Also add a comment suggesting the use of --display-fps to the manpage,
which doesn't have anything to do with the rest of this commit, but is
important to make smoothmotion run well.
Repurpose demuxer->filetype for this. It used to be used to print a
human readable format description; change it to a symbolic format name
and export it as property.
Unfortunately, libavformat has its own weird conventions, which are
reflected through the new property, e.g. the .mp4 case mentioned in the
manpage.
Fixes#1504.
SmoothMotion is a way to time and blend frames made popular by MadVR. It's
intended behaviour is to remove stuttering caused by mismatches between the
display refresh rate and the video fps, while preserving the video's original
artistic qualities (no soap opera effect). It's supposed to make 24fps video
playback on 60hz monitors as close as possible to a 24hz monitor.
Instead of drawing a frame once once it's pts has passed the vsync time, we
redraw at the display refresh rate, and if we detect the vsync is between two
frames we interpolated them (depending on their position relative to the vsync).
We actually interpolate as few frames as possible to avoid a blur effect as
much as possible. For example, if we were to play back a 1fps video on a 60hz
monitor, we would blend at most on 1 vsync for each frame (while the other 59
vsyncs would be rendered as is).
Frame interpolation is always done before scaling and in linear light when
possible (an ICC profile is used, or :srgb is used).
These aliases were removed in commit 1ec77214. Add a notice to the
manpage how to get these back. Apparently, "lanczos2" and "lanczos3"
were the only interesting aliases possibly used by someone, so the
description is limited to these two.
These are now auto-detected sanely; and enabled whenever it would be a
performance or quality gain (which is pretty much everything except
bilinear/bilinear scaling).
Perhaps notably, with the absence of scale_sep, there's no more way to
use convolution filters on hardware without FBOs, but I don't think
there's hardware in existence that doesn't have FBOs but is still fast
enough to run the fallback (slow) 2D convolution filters, so I don't
think it's a net loss.
This is better even for non-separable. The only exception is when using
bilinear for both lscale and cscale. I've fixed the
documentation/comments to make more sense.
This is not quite the same thing as madVR's antiringing algorithm, but
it essentially does something similar.
Porting madVR's approach to elliptic coordinates will take some amount
of thought.
This also fixes the maximum range to 16.0, which was previously set to
32.0 and incorrectly documented as 8.0. 16 taps should be more than
anybody will ever need, but it's the highest radius that's supported by
all affected filters.
Fixes#1472.
(Maybe these options should have been named --autofit-max and
--autofit-min, but since --autofit-larger already exists, use
--autofit-smaller for symmetry.)
The "\\" escape was rendered as "\" on the website. I'm hoping quoting
this in ``...`` will render it correctly.
Also add an example for show_text, which awkwardly does not require
escaping the "\".
After finding out more about how video mastering is done in the real
world it dawned upon me why the "hack" we figured out in #534 looks so
much better.
Since mastering studios have historically been using only CRTs, the
practice adopted for backwards compatibility was to simulate CRT
responses even on modern digital monitors, a practice so ubiquitous that
the ITU-R formalized it in R-Rec BT.1886 to be precisely gamma 2.40.
As such, we finally have enough proof to get rid of the option
altogether and just always do that.
The value 1.961 is a rounded version of my experimentally obtained
approximation of the BT.709 curve, which resulted in a value of around
1.9610336. This is the closest average match to the source brightness
while preserving the nonlinear response of the BT.1886 ideal monitor.
For playback in dark environments, it's expected that the gamma shift
should be reproduced by a user controlled setting, up to a maximum of
1.224 (2.4/1.961) for a pitch black environment.
More information:
https://developer.apple.com/library/mac/technotes/tn2257/_index.html
Seems to work with GtkSocket and passing the gtk_socket_get_id() value
via "wid" option to mpv.
One caveat is that using <tab> to move input focus from mpv to GTK does
not work. It seems we would have to interpret <tab> ourselves in this
case. I'm not sure if we really should do this - it would probably
require emulating some other typical conventions too. I'm not sure if an
embedder could do something about this on the toolkit level, but in
theory it would be possible, so leave it as is for now.
Remove the "all" special-behavior, and instead interpret trailing "*"
characters. --display-tags=all is replaced by --display-tags=* as a
special-case of the new behavior.
See #1404.
Note that the most straight-forward value for matchlen in the normal
case would be INT_MAX, because it should be using the entire string.
I used keylen+1 instead, because glibc seems to handle this case
incorrectly:
snprintf(buf, sizeof(buf), "%.*s", INT_MAX, "hello");
The result is empty, instead of just containing the string argument.
This might be a glibc bug; it works with other libcs (even MinGW-w64).
Make their meaning more exact, and don't pretend that there's a
reasonable definition for "bits-per-pixel". Also make unset fields
unavailable.
average_depth still might be inconsistent: for example, 10 bit 4:2:0 is
identified as 24 bits, but RGB 4:4:4 as 12 bits. So YUV formats
seemingly drop the per-component padding, while RGB formats do not.
Internally it's consistent though: 10 bit YUV components are read as
16 bit, and the padding must be 0 (it's basically like an odd fixed-
point representation, rather than a bitfield).
bpp(bits-per-pixel) and depth(bit-depth for color component) can
be calculated from pixelformat technically but it requires massive
informations to be implemented in client side.
These subproperties are provided for convenience.
This avoids issues when upscaling directly in linear light, and is the
recommended way to upscale images according to imagemagick.
The default slope of 6.5 offers a reasonable compromise between
ringing artifacts eliminated and ringing artifacts introduced by
sigmoid-upscaling. Same goes for the default center of 0.75.
The previous implementation of opengl-cb kept only latest flipped frame.
This can cause massive frame drops because rendering is done asynchronously
and only the latest frame can be rendered.
This commit introduces frame queue and releated options to opengl-cb.
frame-queue-size: the maximum size of frame queue (1-100, default: 1)
frame-drop-mode: behavior when frame queue is full (pop, clear, default: pop)
The frame queue holds delayed frames and drops frames if the frame queue is
overflowed with next method:
'pop' mode: drops all the oldest frames overflown.
'clear' mode: drops all frames in queue and clear it.
With default options(frame-queue-size=1:frame-drop-mode=pop),
opengl-cb behaves in the same way as previous implementation effectively.
For frame-queue-size > 1, opengl-cb tries to calls update() without waiting
next flip_page() in order to consume queued frames.
Signed-off-by: wm4 <wm4@nowhere>
wm4