The -ni option does something with the AVI demuxer only.
Also fix misleading error messages when the packet queue overflows (it
suggests using -ni, which in the typical case of playing NI AVI files
will not work, as demux_lavf is used by default).
This controlled the generation of the palette for DVD subs if no palette
was found. The option name and description is confusing, and it was
probably barely useful. Remove the option, and hardcode the behavior to
the option's default value.
The code for this option attempted to emulate the old as-documented
behavior. It wasn't very good at it, and now that the old OSD code has
been removed, it's entirely pointless.
This removes the factor 1.7 with which --subfont-text-scale was
multiplied.
Most of these cased working when the OSD was switched to libass, or
didn't do anything even before that.
Also don't recursively include subreader.h in sub.h.
To ease changing all the VOs to the new OSD rendering, fallbacks,
conversions, support code etc. was left all over the code. Now that
all VOs have been changed, all that code is inactive. Remove it.
Strip down spudec.c. We don't need the old grayscale and scaling stuff
anymore. (Not removing spudec itself yet - I'm not confident that the
libavcodec DVD sub decoder is sufficient, and it would also require
some hacks to get DVD palette and resolution information from libdvdread
to libavcodec.)
The option --spuaa, --spualign, --spugauss were used with the old sub
scaling code, and don't do anything anymore.
This was an extremely obscure setting, as it was used only with vo_gl
if its scaled-osd suboption was used. If you really want this, you can
set the desired ass-hinting value directly, and there will be literally
no loss in functionality.
Note that this didn't actually test whether the EOSD was scaled.
Basically, it only checked whether vo_gl had the scaled-osd suboption
set.
Useless. It complicated the code and caused flicker, and was useless
otherwise. The manpage describes this option as "should not normally
be used".
One possibly useful effect from the point of view of the user was that
vsync was disabled. You can do this with the --vsync option, or by
changing X/driver settings directly.
In input test mode, key bindings won't be executed, but are shown on the
OSD. The OSD includes various information, such as the name of the key,
the command itself, whether it's builtin, and the config file location
it was defined.
The input test mode can be enabled with "--input=test". No effort is
spent trying to react to key bindings that normally exit the player;
they are treated just like any other binding.
This changes the name of this project to mpv. Most user-visible mentions
of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the
default config file location are changed as well.
The new default config file location is: ~/.mpv/
Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI,
which has been removed from mplayer2 ages ago.
We don't have a logo, and the MS Windows resource files sort-of require
one, so leave etc/mplayer.ico/.xpm as-is.
Remove the debian and rpm packaging scripts. These contained outdated
dependencies and likely were more harmful than useful. (Patches which
add working and well-tested packaging are welcome.)
There are a number of options which modify ASS subtitle rendering. Most
of these do things that can interfere with the styling done by subtitle
scripts, resulting in incorrect rendering. Add the --ass-style-override
option to make it easy to disable all overrides. This helps trouble-
shooting, and makes it more practical to use the override features. (You
can simply toggle the ass-style-override property at runtime, should
one of the style override options break subtitle rendering at a certain
point.)
This mainly affects whether most --ass-* options are applied, as well
as --sub-pos. Some things, like explicit style overrides loaded with
--ass-force-style, can't be changed at runtime using the
ass-style-override property.
Replaces the status line with a custom string.
This is probably useful for hacking old slave mode applications into
working again. Even if not, this might be generally useful.
Make more properties use the property-to-option bridge to reduce code
size and to enforce consistency. Some options are renamed to the same
as the properties (the property names are better in all cases).
Do some other minor cleanups. One bigger issue was memory management of
strings: M_PROPERTY_TO_STRING assumed the strings were statically
allocated, and no dynamic allocations could be returned. Fix this in
case the need for such properties arises in the future. Get rid of
m_property_string_ro(), because it's not always clear that the "action"
parameter is M_PROPERTY_SET and the string argument will be used.
This removes the alternative values like "off", "0", "false" etc., and
also the non-English versions of these.
This is done for general consistency. It's better to have a single way
of doing things when multiple ways don't add singificant value.
Also update some choices for consistency.
Rename both the option and property to "osd-level", which fits a bit
better with the general naming scheme. Make it a choice instead of an
integer range. I failed to come up with good names for the various
levels, so leave them as-is.
Remove the useless property handler for the "loop" property too.
Replace --hardframedrop with --framedrop=hard. Rename the framedrop
property from "framedropping" to "framedrop" for the sake of making
command line options have the same name as their corresponding
property. Change the property to accept choice values instead of
numeric values.
Remove unused/forgotten auto_quality variable.
This removes the alternative values like "off", "0", "false" etc., and
also the non-English versions of these.
This is done for general consistency. It's better to have a single way
of doing things when multiple ways don't add singificant value.
Also update some choices for consistency.
--softvol is enabled by default. For most audio outputs, this is a good
thing, as they have either their own (bad) soft volume implementation,
or control the system mixer. With ao_pulse, the situation is a bit
different: it supports per-application volume (i.e. volume control is
not really global). More importantly, ao_pulse uses a rather large audio
buffer, and changing the volume with mplayer's volume filter has a large
delay. With the native ao_pulse volume control, it's instant, because
PulseAudio's audio filtering happens at a later stage in its processing
pipeline (inaccessible for mplayer).
This means native volume control should really be allowed for ao_pulse,
while it's the reverse for other audio outputs. Make --softvol a choice
option, and add a new "auto" choice. This is default and will use PA's
volume control with ao_pulse, and mplayer's volume filter otherwise
(i.e. the old softvol behavior).
The --vid, --aid, --sid options now accept the values 'off' and 'auto',
instead of having the user deal with the numeric values -2 and -1. The
numeric values are not allowed anymore.
Remove the --audio option. It was probably meant as compensation option
for --no-audio. There are no such options for sub/video, and it was not
documented, so just remove it. The replacement is "--aid=auto".
Also do some updates to the manpage.
The --loop option takes slightly different parameters now. --loop=0
used to mean looping forever. Now it means looping is disabled (this is
more logical: 2 means playing 2 more times, 1 means playing 1 more time,
and 0 should mean playing not again).
Now --loop=inf must be used to enable looping forever.
Extend choice types to allow an optional range of integers as values.
If CONF_RANGE is added to the flags of a m_option_type_choice option,
m_option.min/max specify a range of allowed integer values. This can be
used to remove "special" values from make integer range options. These
special values are unintuitive, and sometimes expose mplayer internals
to the user. The (internal) choice values can be freely mixed with the
specified integer value range. If there are overlaps, the choice values
are preferred for conversion to/from strings.
Also make sure the extension to choice options works with properties.
Add the ability to step choice properties downwards, instead of just
upwards.
It can't be re-implemented, because this isn't supported by libass. The
-subalign option and the associated sub-align slave property did
nothing. Remove them.
The rawaudio demuxer had a rather hard to use way to set the audio
format with the --rawaudio=format=value option. The user had to pass a
numeric value, which then was set as wFormatTag member in the
WAVEFORMATEX header.
Make it use the mplayer audio format (the same as --af=format=value).
Add a new internal pseudo audio codec tag, which is hopefully unused,
which makes ad_pcm use the value in wFormatTag as internal mplayer
audio format.
Playing non-PCM formats is disabled. (At least AC3 can be played
directly.)
Rename -slave to -slave-broken to prevent slave mode applications from
working. Do this to prevent horrible user experiences, in case someone
should attempt to try this version of mplayer with smplayer and others.
This also makes it clear that we don't intend to keep slave mode
compatibility, because the slave mode protocol is horrible and bad.
See the changes in options.rst for further reasons and comments.
Although slightly less precise, this sounds less clunky.
This change also causes the --screenshot-filetype option to be renamed
to --screenshot-format.
Teletext requires special OSD support. Because I can't even test
teletext, I can't restore support for it. Since teletext can be
considered ancient and obscure, and since it doesn't make sense to keep
the remaining teletext code without being able to use it, I'm removing
it.
While this was an interesting idea, it wasn't actually useful.
Basically it dumped the raw data (as requested by the demuxer) into a
file. The result is only useful if the file format was raw or maybe
some MPEG packet stream, but not with most modern file formats.
This was disabled by default, and could be enabled with -dr. It was
disabled by default because it was buggy: there were issues with OSD
corruption.
It wasn't entirely sane for OpenGL based VOs either. OpenGL can chose
to drop mapped pixel buffer objects, requiring the application to map
and fill the buffer again. But there was no mechanism in mplayer to
fill the lost buffer again. (It seems this rarely happened in practice,
though.)
On the other side, users liked the --dr flag, because it promised them
more speed. I'm not sure if it actually helped with speed, but it's
unlikely it had any real advantages on modern systems.
In order to evade the --dr cargo culting in mplayer config files, it's
best to get rid of it.
About a year ago, ubitux converted most of the old manpage from the
hard to maintain nroff format to reStructuredText. This was not merged
back into the master repository immediately. The argument was that the
new manpage still required work to be done. However, progress was very
slow. Even worse: the old manpage wasn't updated, because it was
scheduled for deletion, and updating it would have meant useless work.
Now the situation is that the new manpage still isn't finished, and the
old manpage is grossly out of sync with the player. This is not helpful
for users. Additionally, keeping the new manpage in a separate branch,
while the normal development repository for code had the old manpage,
was very inconvenient, because you couldn't just update the
documentation in the same commit as the code.
Even though the new manpage isn't finished yet, merging it now seems to
be the best course of action. Squash-merge the manpage development
branch [1], revision e89f5dd3f2, which branches from the mplayer2
master branch after revision 159102e0cb.
Committers:
* Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.)
* Uoti Urpala <uau@mplayer2.org> (Many updates.)
* Myself (Minor edits.)
Most text of the manpage has been directly taken from the old manpage,
because this is a conversion, not a complete rewrite.
[1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
