This approach is similar to what other vo_opengl backends do. It can also be
used in the future to create another cocoa backend that renders offscreen
with IOSurfaces or FBOs.
Technically needed, but not strictly. It seems it works without in
practice, because demux_lavf.c reads exactly one packet for fill_buffer
call, so there are never packets queued.
We used a complicated and approximate method to cache the stream
timestamp, which is basically per-byte. (To reduce overhead, it was only
cached per 8KB-block, so it was approximate.)
Simplify this, and read/keep the timestamp only on discontinuities. This
is when demux_disc.c actually needs the timestamp.
Note that caching is currently disabled for dvdnav, but we still read
the timestamp only after some data is read. libdvdread behaves well, but
I don't know about libbluray, and the previous code also read the
timestamp only after reading data, so try to keep it safe.
Also drop the start_time offset. It wouldn't be correct anymore if used
with the cache, and the idea behind it wasn't very sane either (making
the player to offset the initial playback time to 0).
Key bindings are decided on the "down" event, so if the prefix is not
unique, the first/shortest will be used (e.g. when both "a" and "a-b"
are mapped, "a" will always be chosen).
This also breaks combining multiple mouse buttons. But it seems users
expect it to work, and it's indeed a bit strange that it shouldn't work,
as mouse bindings are emitted on the key "up" event, not "down" (if the
shorter binding didn't emit a command yet, why shouldn't it be
combinable).
Deal with this by clearing the key history when a command is actually
emitted, instead of when a command is decided. This means if both
MOUSE_BTN0 and MOUSE_BTN0-MOUSE_BTN1 are mapped, the sequence of holding
down BTN0 and then BTN1 will redecide the current command. On the other
hand, if BTN0 is released before BTN1 is pressed, the command is
emitted, and the key history is deleted. So the BTN1 press will not
trigger BTN0-BTN1.
For normal keys, nothing should change, because commands are emitted on
the "down" event already, so the key history is always cleared.
Might fix#902.
CC: @mpv-player/stable (if this fix is successful)
Doesn't work quite right, and will pause for the latency duration after
seeking. Some users use --ao=null to disable audio (even though they
should probably use --no-audio), and this use-case is broken by this
issue too.
CC: @mpv-player/stable
The original goal was just adding backtraces, however making the code
safe (especially wrt. to out of memory Lua errors) was hard. So this
commit also restructures error handling to make it conceptually simpler.
Now all Lua code is run inside a Lua error handling, except the calls
for creating and destroying the Lua context, and calling the wrapper C
function in a safe way.
The new error handling is actually conceptually simpler and more
correct, because you can just call any Lua function at initialization,
without having to worry whwther it throws errors or not.
Unfortunately, Lua 5.2 removes lua_cpcall(), so we have to emulate it.
There isn't any way to emulate it in a way that works the same on 5.1
and 5.2 with the same semantics in error cases, so ifdeffery is needed.
The debug.traceback() function also behaves weirdly differently between
the Lua versions, so its output is not as nice as it could be (empty
extra line).
This should work now, at least kind of. Note that actual success depends
on the behavior of the underlying lib{dvd{nav,read},bluray}
implementation, which could go very wrong.
In the worst case, it could happen that the underlying implementation
seeks a long time before the seek target time. In this case, the player
will just decode video until the target time is reached, even if that
requires e.g. decoding 30 mintues of video before refreshing.
In the not-so-bad but still bad case, it would just miss the seek
target, and seek past it.
In my tests, it works mostly ok, though. Seeking backwards usually
fails, unless something like --hr-seek-demuxer-offset=1 is used (this
makes it seek to 1 second before the target, which may or may not be
enough to compensate for the DVD/BD imprecision).
This is a pretty big change. Instead of doing a half-hearted passthrough
of the playback timestamp, we attempt to rewrite the raw MPEG timestamps
such that they match with the playback time.
We add the offset between raw start timestamp and playback time to the
packet timestamps. This is the easy part; but the problem is with
timestamp resets. We simply detect timestamp discontinuities by checking
whether they are more than 500ms apart (large enough for all video
faster than 2 FPS and audio with reasonable framesizes/samplerates), and
adjust the timestamp offset accordingly.
This should work pretty well. There may be some problems with subtitles.
If the first packet after a timestamp reset is a subtitle instead of
video, it will fail. Also, selecting multiple audio or video streams
won't work (but mpv doesn't allow selecting several anyway). Trying to
demux subtitles with no video stream enabled will probably fail.
Untested with Bluray, because I have no Bluray sample.
Background:
libdvdnav/libdvdread/libbluray make this relatively hard. They return a
raw MPEG (PS/TS) byte stream, and additionally to that provide a
function to retrieve the current "playback" time. The playback time is
what should be displayed to the user, while the MPEG timestamps can be
completely different. Even worse, the MPEG timestamps can reset. Since
we use the libavformat demuxer (instead of parsing the MPEG packets in
the DVD/BD code), it's hard to associate between these timestamps. As a
result, the time display is special cased in the playloop, and of low
quality (updates only all 1 or 2 seconds, sometimes is incorrect). The
fact that the stream cache can be between demuxer and the stream source
makes things worse.
All the libs seem to provide an event that tells whether timestamps are
resetting. But since this signalling is byte based, it's hard to connect
it to the demuxed MPEG packets. It might be possible to create some sort
of table mapping file positions to discontinuities and new timestamps.
(For simplicity, this table could be 2 entries large, sufficient to
catch all discontinuities if the distance between them is larger than
the total buffering.)
It can happen that demux_fill_buffer() adds more than 1 packet, and then
the packets would add up. Affects demux_disc.c only (nothing else uses
this function).
When seeking, we violently destroy the filter, because vapoursynth has
no proper API for terminating a video with unknown frame count. This
looks like an error to vapoursynth, and the error is returned via the
frame callbacks. The bug is that we remember this error state across
reinitialization, so on the first filter call after reinitialization, we
thought filtering the current frame failed. This caused a shift by 1
frame on each seek.
CC: @mpv-player/stable
Not all compilers on all platforms have atomics available (even if they
could, technically speaking).
We don't use atomics that much, only the following things rely on it:
1. the audio pull code, and all audio outputs using it
2. updating global msg levels
3. reading log messages through the client API
Just disable 1. and 3. if atomics are not available. For 2., using fake-
atomics isn't too bad; at worst, message levels won't properly update
under certain situations (but most likely, it will work just fine).
This means if atomics are not available, the client API function
mpv_request_log_messages() will do nothing.
CC: @mpv-player/stable
This should be unneeded, and the packet position is already sufficient
for this case.
Accessing the stream position directly is going to be a problem when the
stream is accessed from another thread later.
Suggested by tholin on github issue #882.
This is not entirely clean, but the fields we're accessing might be
considered internal to libavformat. On the other hand, existence of the
fields is guaranteed by the ABI, and nothing in the libavformat doxygen
suggestes they're not allowed to be accessed.
CC: @mpv-player/stable
DVD and Bluray (and to some extent cdda) require awful hacks all over
the codebase to make them work. The main reason is that they act like
container, but are entirely implemented on the stream layer. The raw
mpeg data resulting from these streams must be "extended" with the
container-like metadata transported via STREAM_CTRLs. The result were
hacks all over demux.c and some higher-level parts.
Add a "disc" pseudo-demuxer, and move all these hacks and special-cases
to it.
(Again.)
This time, we simply make it event-based, as it should be. This is done
for both demuxer metadata and stream metadata.
For some ogg-over-icy streams, 2 updates are reported on stream start.
This is because libavformat reports an update right on start, while
including the same info in the "static" metadata. I don't know if that's
a bug or a feature.
It's unlikely that files with multiple audio tracks and with replaygain
actually happen, but this change might help avoid minor corner cases
with later changes.
Recently, libavformat added demuxers to open image files like normal
demuxers. This is a good thing, but for now they interfere with the
operation of demux_mf. Add them to the blacklist until there is a proper
solution.
(The list doesn't contain _all_ recognized image formats, just those
that might interfere with demux_mf.)
CC: @mpv-player/stable
This returned a stream error value directly to libavformat, which can't
make sense. For example STREAM_ERROR (0) means success in libavformat
error codes. (The meaning of the libavformat read_seek return value is
underdocumented too.)
The intention is to make it obvious which mpv releases certain changes
will apply to.
Also attempt to fix RST formatting of the list. This is not very proper,
but probably good enough.
wm4