Looks like a bunch of off-by-one errors.
The track number was mistakenly offset by 1 - this shifted all chapters
by one, and make the first chapter start on the second track (so the
"chapter" property returned -1 in the first track since it was before
the first chapter).
Also, the calculation of the sector destination was messed up. This
comes from commit 32d818f0, where I apparently attempted to calculate
the position to one byte before the section, but unfortunately math
doesn't work this way and it was nonsense. Just drop this idea; while it
may help with seeking (probably...), it also returns slightly different
times. The user shall use hr-seeks if accurate seeking is required.
Hopefully fixes#1560.
In my opinion, libavformat should be doing this. But a patch handling a
very safe case rejected, so I suppose we have to do it manually. (This
patch was only escaping spaces, which can never work because they break
the basic syntax of the HTTP protocol.)
This commit attempts to do 2 things:
- Try to guess whether libavformat will use the URL for http. This is
not always trivial, because some protocols will recursively pass part
of the user URL to http in some way.
- Try to fix invalid URLs. We fix only the simplest case: only
characters that are never valid are escaped. This excludes invalid
escape codes, which happen with freestanding '%' characters.
Fixes#1495.
libdvdnav is garbage. Seeking by time is incredibly inexact, which is in
part due to the fact that it does not use the DVD seek tables. Instead,
it assumes CBR for certain ranges within the DVD, which makes especially
small seeks unreliable.
I have no good fix for this, other than hacking libdvdnav (I'd rather
prefer to remove mpv DVD support completely than doing this). So here's
a shitty hack that tries to workaround these problems. A basic
observation is that seeking in VLC seems to work quite well; however it
seems to be based on seeking by blocks (unless there is a subtle "trick"
I didn't see in the source code). mpv usually seeks by timestamps, so
this is not an option for us. However, we can pretend we are doing this
in the DVD layer.
The previous commit added a way to pass through relative seeks. This
commit uses the relative seek. STREAM_CTRL_SEEK_TO_TIME is backwards
compatible (there's still dvdread and bluray), so most code is about
extracing the relative seek information and turning it into a block
seek.
(Another way would have been using SEEK_FACTOR stuff, but that would
probably make for a less reliable way to handle this situation.)
Additionally, if a hr-seek is done, add an offset by 10 seconds. As long
as the error done by libdvdnav is not worse, this should help with hr-
seeks - although it makes them much slower.
This complains within dvb_strtok_r() that savePtr is uninitialized.
There doesn't seem to be any code path where this can happen though, so
it's probably a false positive. Silence it anyway.
This causes more constant reading from the DVB device,
and seems not to hurt the stream-controls.
As the device cache seems to fill up when not
reading from it for several seconds, reading
into the cache fixes desync-issues after
the initial analyzeduration of the demuxer.
Was already possible before by injecting the magic PID
8192 into channels.conf, the flag makes this much more
useable and we also have it documented.
Useful not only for debugging, but also for incomplete
channels.conf (mplayer format...), multi-channel
recording, or channels which do dynamic PID switchng.
full-transponder is also useful for channels which switch PIDs on-the-fly.
ffmpeg can handle this, but it needs the full stream with all PIDs.
There is the STD which contains service-names
(ffmpeg can understand it),
and the EIT which contains the EPG
(ffmpeg does not parse it, but e.g. VLC does).
As we now have more PIDs in general, increase the maximum
number of demuxers we can open. ffmpeg has an internal
limit of 64 PIDs, we are still far from that.
If VDR-channel-config is used, we know the service_id.
Using that, PMT can be extracted from PAT (code for that
inspired by szap-s2 again).
For this, we need to demux PAT with a special filter-setup,
and once PMT was found it can be added to the PID-list.
PMT is only resolved the first time one tunes to a channel,
then stored in the channel-list in memory.
With PMT available, ffmpeg can safely decode the teletext-pids.
I also added a comment explaining the potentially occuring structures for future reference.
For tokenization, a custom strtok_r implementation is used,
inspired by strtok_r as implemented in musl and ffmpeg,
hopefully slightly more readable (av_strtok_r is not available in libav,
and strtok_r is not available everywhere).
Move PID-string parsing into a separate function, reduces code-duplication.
Drop TPID-parsing again since teletext-stream seems not really correctly identified (ffmpeg guessed mp3 in my test...).
Parsing now done using strtok + sscanf instead of sscanfs with fixed numbers of expected fields -
gives more correct checking of PID-overflow, will allow VDR-style PID-field parsing.
The PID-parsing is not really nicely done and also does not yet handle the special VDR-style syntax.
A later commit will move the parsing to a separate function handling that which also checks that the maximum PID-count is not exceeded.
In mplayer-style channels-config, we had a LNB-field used for that.
In old VDR times, the location-field was also containing DISEQc information,
now it does that only indirectly (location => LNB => vdr knows from lnb-config).
We only accept it as this if the field is fully numeric.
Now also "stream ID" (for DVB-S2) and "inversion" are understood.
The parameter-string can also provide information on FEC, rolloff etc. For DVB-S, "auto" which mpv uses by default should be fine, I can also confirm it works. For non-DVB-S cards, it might be useful to also parse this information in case of a vdr-channel list.
As I have no such hardware and thus would have to do it blindly, I added a FIXME.
Mostly complete vdr-channels.conf format documentation is at http://www.vdr-wiki.de/wiki/index.php/Channels.conf (german only).
Still incomplete. Initialize is_dvb_s2 boolean in channel-struct.
We first check whether the channels.conf-line at hand is sscanf'able with a vdr-style pattern. If yes, we assume it is a vdr-channel-config (we check whether sscanf consumed the full line).
The vdr-style config also contains a parameter-string which contains information about polarization + delivery type (e.g. DVB-S2).
With this change, S2-tuning works with a VDR-channel list.
Missing (later commits):
- vdr-parameter-string also contains other information, e.g. invert-flag, needs to be parsed.
- Diseqc-lnb-number is not present in VDR-config (I believe it is handled via the location-parameter + lnb-config there). For backwards compatibility, the location-parameter can be the lnb-number - we should test whether it is an int and assume this in this case.
- VID, AID and TID-lists are extremely ugly in their syntax for VDR. At the moment, only the first number is parsed (and TID fully ignored), needs to be fixed.
It contains now also a boolean which tells whether this is an DVB-S2 channel (not initialized yet - tbd in next commit).
We could also pass through the type of the delivery system (would be more flexible), but the delivery-system-enum is only available with S2API, so this is more backwards-compatible.
If someone has DVB-T2 / DVB-C2 hardware and extends the code to deal with it, this should be changed.
Also allows demuxers to buffer, and we explicitly discard stale QPSK events.
Inspiration taken from the szap-s2 implementation.
S2API is only used if available and for DVB-S cards - it might also be useful to have that for DVB-T2 / DVB-C2 tuning later, but I do not have the HW / no DVB-T2 broadcasting station nearby to test functionality.
This should do no functional changes, only usage of the different API. The S2API is more extensible and a requirement for all the HD-deliveries (e.g. DVB-S2) and since 2.6.28 is the successor of the old API.
Tuning to DVB-S2 channels actually already "works" like this if the delivery is hardcoded in - for a fully working implementation, the channels.conf.sat would need an additional field indicating the delivery type (VDR-type channels.conf have that).
This commit also:
- Cleans up some debug output.
- Moves an unneeded usleep(100000) (only needed for diseqc switching for SAT) into the DVB-S-only part of the implementation.
Define a new macro "DVB_USE_S2API" to be used to switch to S2API if available,
also document what is the main difference in the new S2API.
StreamID-handling is only supported since API 5.2, and some macros
were renamed or only added later with 5.8 (somewhere around kernel 3.6),
so some define-fixups are needed to support these intermediate
kernel header versions.
Apparently this is what users would expect.
Going the way of least resistance (in terms of messing with this old,
rarely used code), sorting them by some kind of addition timestamp
(called priority in the patch) is the easiest.
Fixes#1390.
stream_edl merely makes demux_edl act "special", which checks for the
stream type explicitly and then does something with its URL. If a cache
is added before the stream, it'll try to use the cache's URL (i.e. an
empty string), and will then obviously fail to parse the URL. While this
is slightly stupid, just disabling the entirely useless cache is the
most effective solution.
Fixes#1378.
As suggested in issue #1251. I think the main point is that it acts as
a hack to return to the DVD menu when jumping past the last chapter,
because it will reach title-EOF, instead of explicitly jumping to the
next file (which usually exits the player).
This basically reverts commit 8b7418d, except it doesn't include an
off-by-1 error (apparently).
Closes#1251.
This was requested.
It seems libdvdread can't get the duration for titlesets other than the
currently opened title. The data structures contain dangling pointers
for these, and MPlayer works this around by opening every title
separately for the purpose of dumping the title list.
Apparently, we treat different tracks as titles, so returning the number
of titles (which is user-visible as "disc-titles" property) is
completely misguided.
Apparently, libdvdnav always reports a last chapter that points to the
exact end of the title. This is useless for us.
Again, same possible caveats as with the previous commit.
This way, chapter 0 will always point to the start of the title.
At least this is the intention; it's likely that DVDs as well as
libdvdnav do random things that lead to random results.
This was completely breaking any low-level caching. Change it so that at
least demuxer caching will work.
Do this by using the metadata cache mechanism to funnel through the menu
commands.
For some incomprehensible reason, I had to reorder the events (which
affects their delivery priority), or they would be ignored. Probably
some crap about the event state being cleared before it could be
delivered. I don't give a shit.
All this code sucks. It would probably be better to let discnav.c access
the menu event "queue" directly, and to synchronize access with a mutex,
instead of going through all the caching layers, making things
complicated and slow.
...because everything is terrible.
strerror() is not documented as having to be thread-safe by POSIX and
C11. (Which is pretty much bullshit, because both mandate threads and
some form of thread-local storage - so there's no excuse why
implementation couldn't implement this in a thread-safe way. Especially
with C11 this is ridiculous, because there is no way to use threads and
convert error numbers to strings at the same time!)
Since we heavily use threads now, we should avoid unsafe functions like
strerror().
strerror_r() is in POSIX, but GNU/glibc deliberately fucks it up and
gives the function different semantics than the POSIX one. It's a bit of
work to convince this piece of shit to expose the POSIX standard
function, and not the messed up GNU one.
strerror_l() is also in POSIX, but only since the 2008 standard, and
thus is not widespread.
The solution is using avlibc (libavutil, by its official name), which
handles the unportable details for us, mostly. We avoid some pain.
In addition to the messed-up expression, the endianness was also
inverted. The code reads big endian by default.
It "worked" by coincidence, but for little endian, codepoints outside of
latin1 were broken.
The broken expression was found by Coverity.
Thanks to STREAM_CTRL_HAS_AVSEEK, we actually know whether CTRL_AVSEEK
is implemented at all, and we can avoid a blocking wait on the cache if
demux_lavf sends CTRL_AVSEEK even if it won't wait. I'm hoping this
can't currently happen, but why hope if we can explicitly prevent it.
It'll make us more robust against future changes in libavformat.
Basically, this will mark the demuxer as seekable with rtmp* and mmsh
protocols. These protocols have network-level time seeking, and whether
you can seek on the byte level does not matter.
Until now, seeking was typically only enabled because of the cache, and
a (nonsensical) warning was shown accordingly.
It still could happen that the server doesn't actually support thse
requests (or simply rejects them), so this is somewhat imperfect.
No development activity (or even any sign of life) for almost a year.
A replacement based on youtube-dl will probably be provided before the
next mpv release. Ask on the IRC channel if you want to test.
Simplify the Lua check too: libquvi linking against a different Lua
version than mpv was a frequent issue, but with libquvi gone, no
direct dependency uses Lua, and such a clash is rather unlikely.
The immediate mode (which is the default) uses a tiny ringbuffer and
doesn't grab timestamps. This leads to quite bad behavior due to the
fact that there's an additional buffer between playloop and TV code (the
demuxer thread, which doesn't exist in MPlayer).
Always grab the timestamps and use a decently-sized buffer. I still have
no clue what I'm doing, and hacked it until it appeared to work. Report
regressions if you experience any.
