Makes all of overlay_add work on windows/mingw.
Since we now don't explicitly check for mmap() anymore (it's always
present), this also requires us to make af_export.c compile, but I
haven't tested it.
This is an ancient filter, and we assume it's not useful anymore.
If you really want this, it's still available in libavfilter (e.g. via
--vf=lavfi=[pp...]). The disadvantage is that mpv doesn't pass through
QP information to libavfilter. (This was probably the reason vf_pp still
was part of mpv - it was slightly easier to pass QP internally.)
As usual, we use C11 semantics, and emulate it if <stdatomic.h> is not
available.
It's a bit messy with __sync_val_compare_and_swap(). We assume it has
"strong" semantics (it can't fail sporadically), but I'm not sure if
this is really the case. On the other hand, weak semantics don't seem to
be possible, since the builtin can't distinguish between the two failure
cases that could occur. Also, to match the C11 interface, use of gcc
builtins is unavoidable. Add a check to the build system to make sure
the compiler supports them (although I don't think there's any compiler
which supports __sync_*, but not these extensions).
Needed for the following commit.
This shouldn't use the host's 'ar' when building static libs. It only
worked until now because Linux 'ar' is usually built with PE support.
Couldn't confirm whether it works, because this dumb crap is just
broken when cross-compiling to mingw.
No development activity (or even any sign of life) for almost a year.
A replacement based on youtube-dl will probably be provided before the
next mpv release. Ask on the IRC channel if you want to test.
Simplify the Lua check too: libquvi linking against a different Lua
version than mpv was a frequent issue, but with libquvi gone, no
direct dependency uses Lua, and such a clash is rather unlikely.
Especially with other components (libavcodec, OSX stuff), the thread
list can get quite populated. Setting the thread name helps when
debugging.
Since this is not portable, we check the OS variants in waf configure.
old-configure just gets a special-case for glibc, since doing a full
check here would probably be a waste of effort.
Because 1) Lua is terrible, and 2) popen() is terrible. Unfortunately,
since Unix is also terrible, this turned out more complicated than I
hoped. As a consequence and to avoid that this code has to be maintained
forever, add a disclaimer that any function in Lua's utils module can
disappear any time. The complexity seems a bit ridiculous, especially
for a feature so far removed from actual video playback, so if it turns
out that we don't really need this function, it will be dropped again.
The motivation for this commit is the same as with 8e4fa5fc.
Note that there is an "#ifndef __GLIBC__". The GNU people are very
special people and thought it'd be convenient to actually declare
"environ", even though the POSIX people, which are also very special
people, state that no header declares this and that the user has to
declare this manually. Since the GNU people overtook the Unix world with
their very clever "embrace, extend, extinguish" strategy, but not 100%,
and trying to build without _GNU_SOURCE is hopeless; but since there
might be Unix environments which support _GNU_SOURCE features partially,
this means that in practice "environ" will be randomly declared or not
declared by system headers. Also, gcc was written by very clever people
too, and prints a warning if an external variable is declared twice (I
didn't check, but I suppose redeclaring is legal C, and not even the gcc
people are clever enough to only warn against a definitely not legal C
construct, although sometimes they do this), ...and since we at mpv hate
compiler warnings, we seek to silence them all. Adding a configure test
just for a warning seems too radical, so we special-case this against
__GLIBC__, which is hopefully not defined on other libcs, especially not
libcs which don't implement all aspects of _GNU_SOURCE, and redefine
"environ" on systems even if the headers define it already (because they
support _GNU_SOURCE - as I mentioned before, the clever GNU people wrote
software THAT portable that other libcs just gave up and implemented
parts of _GNU_SOURCE, although probably not all), which means that
compiling mpv will print a warning about "environ" being redefined, but
at least this won't happen on my system, so all is fine. However, should
someone complain about this warning, I will force whoever complained
about this warning to read this ENTIRE commit message, and if possible,
will also force them to eat a printed-out copy of the GNU Manifesto, and
if that is not enough, maybe this person could even be forced to
convince the very clever POSIX people of not doing crap like this:
having the user to manually declare somewhat central symbols - but I
doubt it's possible, because the POSIX people are too far gone and only
care about maintaining compatibility with old versions of AIX and HP-UX.
Oh, also, this code contains some subtle and obvious issues, but writing
about this is not fun.
This gets rid of this warning:
Could not update timestamps for skipped samples.
This required an API addition to FFmpeg (otherwise it would instead
doing arithmetic on the timestamps itself), so whether it works depends
on the FFmpeg version.
Use libwaio to read from pipes (stdin or named pipes) on Windows. This
liberates us from nasty issues, such as pipes (as created by most
programs) not being possible to read in a non-blocking or event-driven
way. Although it would be possible to do that in a somewhat sane way
on Vista+, it's still not easy, and on XP it's especially hard. libwaio
handles these things for us.
Move pipe.c to pipe-unix.c, and remove Windows specific things. Also
adjust the input.c code to make this work cleanly.
Replace select() usage with poll() (and reduce code duplication).
Also, while we're at it, drop --disable-audio-select, since it has the
wrong name anyway. And I have doubts that this is needed anywhere. If
it is, it should probably fallback to doing the right thing by default,
instead of requiring the user to do it manually. Since nobody has done
that yet, and since this configure option has been part of MPlayer ever
since ao_oss was added, it's probably safe to say it's not needed.
The '#ifdef SNDCTL_DSP_GETOSPACE' was pointless, since it's already used
unconditionally in another place.
This was kept in the codebase because it is slightly faster than --vo=opengl
on really old Intel cards (from the GMA era). Time to kill it, and let it rest.
Fixes#1061
The oldest supported FFmpeg release doesn't provide
av_vdpau_alloc_context(). With these versions, the application has no
other choice than to hard code the size of AVVDPAUContext. (On the other
hand, there's av_alloc_vdpaucontext(), which does the same thing, but is
FFmpeg specific - not sure if it was available early enough, so I'm not
touching it.)
Newer FFmpeg and Libav releases require you to call this function, for
ABI compatibility reasons. It's the typcal lakc of foresight that make
FFmpeg APIs terrible. mpv successfully pretended that this crap didn't
exist (ABI compat. is near impossible to reach anyway) - but it appears
newer developments in Libav change the function from initializing the
struct with all-zeros to something else, and mpv vdpau decoding would
stop working as soon as this new work is relewased.
So, add a configure test (sigh).
CC: @mpv-player/stable
If the Xrandr configuration changes, re-read it. So if you change
display modes or screen configuration, it will update the framedrop
refresh rate accordingly.
This passes the rootwin to XRRSelectInput(), which may or may not be
allowed. But it works, and the documentation (which is worse than used
toilet paper, great job Xorg) doesn't forbid it, or in fact say anything
about what the window parameter is even used for.
This is always included in the Xorg development headers. Strictly
speaking it's not necessarily available with other X implementations,
but these are hopefully all dead.
Drop use of the ancient XF86VM, and use the slightly less ancient Xrandr
extension to retrieve the refresh rate. Xrandr has the advantage that it
supports multiple monitors (at least the modern version of it).
For now, we don't attempt any dynamic reconfiguration. We don't request
and listen to Xrandr events, and we don't notify the VO code of changes
in the refresh rate. (The later works by assuming that X coordinates map
directly to Xrandr coordinates, which probably is wrong with compositing
window manager, at least if these use complicated transformations. But I
know of no API to handle this.)
It would be nice to drop use of the Xinerama extension too, but
unfortunately, at least one EWMH feature uses Xinerama screen numbers,
and I don't know how that maps to Xrandr outputs.
Instead of using a regex to match names to be exported from the libmpv
dynamic shared library, use a libmpv.def file, which lists all exported
functions explicitly.
This reduces the platform specifics in syms.py. I'm not sure if the
separate compile_sym task is still needed (it could probably be
collapsed, which would concentrate the platform specifics into one
place).
libmpv requires nm for creating the list of exported symbols (this is
done in syms.py). We should probably just make this list static instead,
but since this involves platform-specific code, for now this quick-fix
will do.
Since the new hwaccel API is now merged in ffmpeg's stable release, we can
finally remove support for the old API.
I pretty much kept lu_zero's new code unchanged and just added some error
printing (that we had with the old glue code) to make the life of our users
less miserable.
This was needed by very old (0.9) versions only. Get rid of it.
Unfortunately, I can't cross-check with the original bug report, since
the bug URL leads to this:
Internal Server Error
TracError: IOError: [Errno 2] No such file or directory: '/home/lennart/svn/trac/pulseaudio/VERSION'
