Don't use an integer division to get the time, since that would round on
second boundaries. Also round up the time by sector size. Seeking rounds
down due to alignment constraints, but if we round up the time, we can
make it land on the exact destination sector.
This fixes that the track change code printed the previous track when
seeking by chapter.
Report the time for each chapter (tracks are treated as chapters). This
allows us to get rid of the "old" chapter mechanism, and also behaves
better with the frontend.
This makes assumptions about the audio formats, but that format is
hardcoded anyway in the rawaudio demuxer defaults (and always was).
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
The tmsg stuff was for the internal gettext() based translation system,
which nobody ever attempted to use and thus was removed. mp_gtext() and
set_osd_tmsg() were also for this.
mp_dbg was once enabled in debug mode only, but since we have log level
for enabling debug messages, it seems utterly useless.
The problem with DVD/BD and playback resume is that most often, the
filename is just "dvd://", while the actual path to the DVD disk image
is given with --dvd-device. But playback resume works on the filename
only.
Add a pretty bad hack that includes the path to the disk image if the
filename starts with dvd://, and the same for BD respectively. (It's a
bad hack, but I want to go to bed, so here we go. I might revert or
improve it later, depending on user feedback.)
We have to cleanup the global variable mess around the dvd_device.
Ideally, this should go into MPOpts, but it isn't yet. Make the code
paths in mplayer.c take MPOpts anyway.
The way the url_options field was handled was not entirely sane: it's
actually a flexible array member, so it points to garbage for streams
which do not initialize this member (it just points to the data right
after the struct, which is garbage in theory and practice). This was
not actually a problem, since the field is only used if priv_size is
set (due to how this stuff is used). But it doesn't allow setting
priv_size only, which might be useful in some cases.
Also, make the protocols array not a fixed size array. Most stream
implementations have only 1 protocol prefix, but stream_lavf.c has
over 10 (whitelists ffmpeg protocols). The high size of the fixed
size protocol array wastes space, and it is _still_ annoying to
add new prefixes to stream_lavf (have to bump the maximum length),
so make it arbitrary length.
The two changes (plus some more cosmetic changes) arte conflated into
one, because it was annoying going over all the stream implementations.
Move the URL parsing code from m_option.c to stream.c, and simplify it
dramatically. This code originates from times when http code used this,
but now it's just relict from other stream implementations reusing this
code. Remove the unused bits and simplify the rest.
stream_vcd is insane, and the priv struct is different on every
platform, so drop the URL parsing. This means you can't specify a track
anymore, only the device. (Does anyone use stream_vcd? Not like this
couldn't be fixed, but it doesn't seem worth the effort, especially
because it'd require potentially touching platform specific code.)
The URL option parser only accesses certain fields. Remove the fields
that are not accessed, and thus are completely unused and inaccessible.
Historically, these fields were supposed to be settable using an extra
list of options passed to open_stream(). Commit f518cf7 removed these
extra options. Apparently nothing ever actually used this facility.
In general, this warning can hint to actual bugs. We don't enable it
yet, because it would conflict with some unmerged code, and we should
check with clang too (this commit was done by testing with gcc).
These were printed only with -v. Most streams had them set to useless
or redundant values, so it's just badly maintained bloat.
Since we remove the "author" field too, and since this may have
copyright implications, we add the contents of the author fields to
the file headers, except if the name is already part of the file header.
This removes the dependency on DEMUXER_TYPE_* and the file_format
parameter from the stream open functions.
Remove some of the playlist handling code. It looks like this was
needed only for loading linked mov files with demux_mov (which was
removed long ago).
Delete a minor bit of dead network-related code from stream.c as well.
This commit removes the "old" networking code in favor of libavformat's
code.
The code was still used for mp_http, udp, ftp, cddb. http has been
mapped to libavformat's http support since approximately 6 months ago.
udp and ftp have support in ffmpeg (though ftp was added only last
month). cddb support is removed with this commit - it's probably not
important and rarely used if at all, so we don't care about it.
EOF should be set when reading more data fails. The stream
implementations have nothing to say here and should behave correctly
when trying to read when EOF was actually read.
Even when seeking, a correct EOF flag should be guaranteed. stream_seek()
(or actually stream_seek_long()) calls stream_fill_buffer() at least
once, which also updates the EOF flag.
These assumed that the buffer provided with fill_buffer() was at least
sector sized, instead of checking the size parameter.
This is just a cleanup, since every caller made sure to align everything
on sector sizes, if a stream has the sector size set.
These were found by the cppcheck and scan-build static analyzers. Most
of these aren't interesting (the 2 previous commits fix some interesting
cases found by these analyzers), and they don't nearly fix all warnings.
(Most of the unfixed warnings are spam, things MPlayer never cared
about, or false positives.)
Remove the "object settings" based track range parsing (needed by
stream_cdda only), and make stream_cdda use CONF_TYPE_INT_PAIR.
This makes the -vf parsing code completely independent from other
options. A bit of that code was used by the mechanism removed with
this commit.
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
This provides the total number of titles (aka tracks) of CDs / VCDs / DVDs.
Additionally, add a titles property to the get_property slave command.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34474 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: ib
mplayer had three ways of enabling CPU specific assembler routines:
a) Enable them at compile time; crash if the CPU can't handle it.
b) Enable them at compile time, but let the configure script detect
your CPU. Your binary will only crash if you try to run it on a
different system that has less features than yours.
This was the default, I think.
c) Runtime detection.
The implementation of b) and c) suck. a) is not really feasible (it
sucks for users). Remove all code related to this, and use libav's CPU
detection instead. Now the configure script will always enable CPU
specific features, and disable them at runtime if libav reports them
not as available.
One implication is that now the compiler is always expected to handle
SSE (etc.) inline assembly at runtime, unless it's explicitly disabled.
Only checks for x86 CPU specific features are kept, the rest is either
unused or barely used.
Get rid of all the dump -mpcu, -march etc. flags. Trust the compiler
to select decent settings.
Get rid of support for the following operating systems:
- BSD/OS (some ancient BSD fork)
- QNX (don't care)
- BeOS (dead, Haiku support is still welcome)
- AIX (don't care)
- HP-UX (don't care)
- OS/2 (dead, actual support has been removed a while ago)
Remove the configure code for detecting the endianness. Instead, use
the standard header <endian.h>, which can be used if _GNU_SOURCE or
_BSD_SOURCE is defined. (Maybe these changes should have been in a
separate commit.)
Since this is a quite violent code removal orgy, and I'm testing only
on x86 32 bit Linux, expect regressions.
The per-CD info will be printed on playback start, per-track info when
a track is played. (This is not a technical restriction, and just goes
along with the existing code.)
The following fields are not included in output, because these are
supposedly binary: CDTEXT_DISCID, CDTEXT_GENRE, CDTEXT_SIZE_INFO,
CDTEXT_TOC_INFO, CDTEXT_TOC_INFO2.
Fix cdda speed default value, range and use more robust condition.
Based on patch by Ingo Brückl [ib wupperonline de].
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34458 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not call paranoia_overlapset with 0, it actually causes cdparanoia to just hang.
Instead use it to set/unset PARANOIA_MODE_OVERLAP.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34459 b3059339-0415-0410-9bf9-f77b7e298cf2
Fail if trying to seek beyond the last chapter, not just if it is beyond the end of the disc.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34460 b3059339-0415-0410-9bf9-f77b7e298cf2
cdda: set position to an actual EOF position when we set EOF.
This avoids some inconsistency like the stream indicating EOF but
a read still returning more data.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34462 b3059339-0415-0410-9bf9-f77b7e298cf2
Allow PARANOIA_MODE_FULL with skipping.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34467 b3059339-0415-0410-9bf9-f77b7e298cf2
Don't call paranoia_modeset() for PARANOIA_MODE_DISABLE.
cdparanoia destroys start sector information after such a call.
Since it is pointless without setting a mode anyway, don't do it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34468 b3059339-0415-0410-9bf9-f77b7e298cf2
Add comment to a condition that is just a hack around a cdparanoia bug.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34472 b3059339-0415-0410-9bf9-f77b7e298cf2
Add checks for errors in stream_cdda's get_track_by_sector().
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34495 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix seeking beyond EOF in stream_cdda to work with cache.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34577 b3059339-0415-0410-9bf9-f77b7e298cf2
After commit 39e373aa8d ("options: allocate dynamic options with
talloc") dynamically allocated options must be allocated with talloc.
stream_cdda allocated a string used with the option machinery using
strdup(). Fix. Also silence a warning.
Constrain libcdparanoia's caching which badly breaks playback with
-nocache (libcdparanoia requests a huge chunk at once, then lets the
disk spin down while that is being played, leading to a pause when the
disk needs to spin back up after the big chunk is finished). Switching
to libcdio by default which does not have this ssue might be a better
long-term solution though.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33557 b3059339-0415-0410-9bf9-f77b7e298cf2
Adjust printf length modifier, fixes the warning:
stream/stream_cdda.c:358: warning: format '%ld' expects type 'long int', but argument 4 has type 'int'
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31512 b3059339-0415-0410-9bf9-f77b7e298cf2
This fixes a bunch of warnings about missing function prototypes.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31509 b3059339-0415-0410-9bf9-f77b7e298cf2
