Now you need FFmpeg git, or something.
This also gets rid of the last real use of gpu_memcpy(). libavutil does
that itself. (vaapi.c still used it, but it was essentially unused,
because the code path isn't really in use anymore. It wasn't even
included due to the d3d-hwaccel dependency in wscript.)
See "Copyright" file for caveats.
This changes the remaining "almost LGPL" files to LGPL, because we think
that the conditions the author set for these was finally fulfilled.
This adds handling of spherical video metadata: retrieving it from
demux_lavf and demux_mkv, passing it through filters, and adjusting it
with vf_format. This does not include support for rendering this type of
video.
We don't expect we need/want to support the other projection types like
cube maps, so we don't include that for now. They can be added later as
needed.
Also raise the maximum sizes of stringified image params, since they
can get really long.
Since these need to be refcounted, we throw them directly into struct
mp_image instead of being part of mp_colorspace. Even though they would
semantically make more sense in mp_colorspace, having them there is
really awkward because mp_colorspace is passed around and stored a lot,
and this way their lifetime is exactly tied to the lifetime of the
mp_image associated with it.
Refactor the image allocation code, and expose part of it as helper
code. This aims towards allowing callers to easily allocate mp_image
references from custom-allocated linear buffers. This is exposing only
as much as what should be actually required.
Since michael was somewhat involved in it, wait with the actual license
change until the core is relicensed. Thus mark it as "Almost LGPL.".
The worrisome part about mp_image.c is that it was created by cehoyos
(which disagreed with LGPL) in commit f2dee327b2. But it turns out it
was a patch by someone else (who agreed with LGPL).
For some reason, the patch was actually slightly modified by cehoyos for
no reason (messed with the include statements), so we mess them back,
just to be sure.
Other than this, there were some commits that added support for new
IMGFMTs over the years. Some of these were by people we didn't ask or we
didn't get permission from. But since the original mp_image code was
replaced by more generic code using FFmpeg pixdesc, none of these
changes are left anyway.
One additional change by cehoyos (115bfb9762) has been removed as well
(when "direct rendering" was dropped from the filter chain).
Preparation for enabling hw filters. mp_image_params can't have an
AVHWFramesContext reference (because it can't hold any allocations, and
isn't meant to hold "active" data in the first place.
So just use a mp_image. It has all real data removed, because that would
essentially leak 1 frame once the decoder or renderer don't need it
anymore.
Helps with gif, probably does unwanted things with other formats.
This doesn't handle --end quite correctly, but this could be added
later.
Fixes#3924.
The hw_subfmt field roughly corresponds to the field
AVHWFramesContext.sw_format in ffmpeg. The ffmpeg one is of the type
AVPixelFormat (instead of the underlying hardware format), so it's a
good idea to switch to this too for preparation.
Now the hw_subfmt field is an mp_imgfmt instead of an opaque/API-
specific number. VDPAU and Direct3D11 already used mp_imgfmt, but
Videotoolbox and VAAPI had to be switched.
One somewhat user-visible change is that the verbose log will now always
show the hw_subfmt as image format, instead of as nonsensical number.
(In the end it would be good if we could switch to AVHWFramesContext
completely, but the upstream API is incomplete and doesn't cover
Direct3D11 and Videotoolbox.)
This has two reasons:
1. I tend to add new fields to this metadata, and every time I've done
so I've consistently forgotten to update all of the dozens of places in
which this colorimetry metadata might end up getting used. While most
usages don't really care about most of the metadata, sometimes the
intend was simply to “copy” the colorimetry metadata from one struct to
another. With this being inside a substruct, those lines of code can now
simply read a.color = b.color without having to care about added or
removed fields.
2. It makes the type definitions nicer for upcoming refactors.
In going through all of the usages, I also expanded a few where I felt
that omitting the “young” fields was a bug.
Instead of doing HDR tone mapping on an ad-hoc basis inside
pass_colormanage, the reference peak of an image is now part of the
image params (alongside colorspace, gamma, etc.) and tone mapping is
done whenever peak_src != peak_dst.
To get sensible behavior when mixing HDR and SDR content and displays,
target-brightness is a generic filler for "the assumed brightness of SDR
content".
This gets rid of the weird display_scaled hack, sets the framework
for multiple HDR functions with difference reference peaks, and allows
us to (in a future commit) autodetect the right source peak from
the HDR metadata.
(Apart from metadata, the source peak can also be controlled via
vf_format. For HDR content this adjusts the overall image brightness,
for SDR content it's like simulating a different exposure)
No reason to do so. See also commit 240ba92b.
Since now many mp_images will never have a pixel aspect ratio set,
redefine a 0/0 aspect ratio to "undefined" instead invalid. This also
brings it more in line with how decoder vs. container aspect ratios are
handled.
Most callers seem to be fine with the new behavior.
mp_image_params_valid() in particular has to be adjusted, or some things
stop working due to mp_images not becoming valid after setting size and
format.
For hwaccel formats, mp_image will merely point to a hardware surface
handle. In these cases, the mp_image_params.imgfmt field describes the
format insufficiently, because it mostly only describes the type of the
hardware format, not its underlying format.
Introduce hw_subfmt to describe the underlying format. It makes sense to
use it with most hwaccels, though for now it will be used with the
following commit only.
MPlayer traditionally always used the display aspect ratio, e.g. 16:9,
while FFmpeg uses the sample (aka pixel) aspect ratio.
Both have a bunch of advantages and disadvantages. Actually, it seems
using sample aspect ratio is generally nicer. The main reason for the
change is making mpv closer to how FFmpeg works in order to make life
easier. It's also nice that everything uses integer fractions instead
of floats now (except --video-aspect option/property).
Note that there is at least 1 user-visible change: vf_dsize now does
not set the display size, only the display aspect ratio. This is
because the image_params d_w/d_h fields did not just set the display
aspect, but also the size (except in encoding mode).
The vf_format suboption is replaced with --video-output-levels (a global
option and property). In particular, the parameter is removed from
mp_image_params. The mechanism is moved to the "video equalizer", which
also handles common video output customization like brightness and
contrast controls.
The new code is slightly cleaner, and the top-level option is slightly
more user-friendly than as vf_format sub-option.
Make the GPU memcpy from the dxva2 code generally useful to other parts
of the player.
We need to check at configure time whether SSE intrinsics work at all.
(At least in this form, they won't work on clang, for example. It also
won't work on non-x86.)
Introduce a mp_image_copy_gpu(), and make the dxva2 code use it. Do some
awkward stuff to share the existing code used by mp_image_copy(). I'm
hoping that FFmpeg will sooner or later provide a function like this, so
we can remove most of this again. (There is a patch, bit it's stuck in
limbo since forever.)
All this is used by the following commit.
mpv had refcounted frames before libav*, so we were not using
libavutil's facilities. Change this and drop our own code.
Since AVFrames are not actually refcounted, and only the image data
they reference, the semantics change a bit. This affects mainly
mp_image_pool, which was operating on whole images instead of buffers.
While we could work on AVBufferRefs instead (and use AVBufferPool),
this doesn't work for use with hardware decoding, which doesn't
map cleanly to FFmpeg's reference counting. But it worked out. One
weird consequence is that we still need our custom image data
allocation function (for normal image data), because AVFrame's uses
multiple buffers.
There also seems to be a timing-dependent problem with vaapi (the
pool appears to be "leaking" surfaces). I don't know if this is a new
problem, or whether the code changes just happened to cause it more
often. Raising the number of reserved surfaces seemed to fix it, but
since it appears to be timing dependent, and I couldn't find anything
wrong with the code, I'm just going to assume it's not a new bug.
MP_IMGFIELD_TOP/MP_IMGFIELD_BOTTOM were completely unused, and
MP_IMGFIELD_ORDERED was always set (even though vf_vdpaupp.c strangely
checked for the latter).
Because gcc (and clang) is a goddamn PITA and unnecessarily warns if
the universal initializer for structs is used (like mp_image x = {})
and the first member of the struct is also a struct, move the w/h
fields to the top.
They are redundant. They were used by draw_bmp.c only, and only in a
special code path that 1. used fixed image formats, and 2. had image
sized perfectly aligned to chroma boundaries (so computing the chroma
width/height is trivial).
There's literally no reason why these functions have to be inline (they
might be performance critical, but then the function call overhead isn't
going to matter at all).
Uninline them and move them to mp_image.c. Drop the header file and fix
all uses of it.
Breaks vo_opengl by default. I'm hot able to fix this myself, because I
have no clue about the overcomplicated color management logic. Also,
whilethis is apparently caused by commit fbacd5, the following commits
all depend on it, so revert them too.
This reverts the following commits:
e141caa97d653b0dd529729c8b3f64fbacd5de31Fixes#1636.
We have MP_CSP_TRC defined, but it wasn't being used by practically
anything. This commit adds missing conversion logic, adds it to
mp_image, and moves the auto-guessing logic to where it should be, in
mp_image_params_guess_csp (and out of vo_opengl).
Note that this also fixes a minor bug: csp_prim was not being copied
between mp_image structs if the format was not YUV in both cases, but
this is wrong - the primaries are always relevant.
This deals with subsampled YUV video that has odd sizes, for example a
5x5 image with 4:2:0 subsampling.
It would be easy to handle if we actually passed separate texture
coordinates for each plane to the shader, but as of now the luma
coordinates are implicitly rescaled to chroma one. If luma and chroma
sizes don't match up, and this is not handled, you'd get a chroma shift
by 1 pixel.
The existing hack worked, but broke separable scaling. This was exposed
by a recent commit which switched to GL_NEAREST sampling for FBOs. The
rendering was accidentally scaled by 1 pixel, because the FBO size used
the original video size, while textures_sizes[0] was set to the padded
texture size (i.e. one pixel larger).
It could be fixed by setting the padded texture size only on the first
shader. But somehow that is annoying, so do something else. Don't pad
textures anymore, and rescale the chroma coordinates in the shader
instead.
Seems like this somehow doesn't work with rectangle textures (and
introduces a chroma shift), but since it's only used when doing VDA
hardware decoding, and the bug occurs only with unaligned video sizes, I
don't care much.
Fixes#1523.
This inserts an automatic conversion filter if a Matroska file is marked
as 3D (StereoMode element). The basic idea is similar to video rotation
and colorspace handling: the 3D mode is added as a property to the video
params. Depending on this property, a video filter can be inserted.
As of this commit, extending mp_image_params is actually completely
unnecessary - but the idea is that it will make it easier to integrate
with VOs supporting stereo 3D mogrification. Although vo_opengl does
support some stereo rendering, it didn't support the mode my sample file
used, so I'll leave that part for later.
Not that most mappings from Matroska mode to vf_stereo3d mode are
probably wrong, and some are missing.
Assuming that Matroska modes, and vf_stereo3d in modes, and out modes
are all the same might be an oversimplification - we'll see.
See issue #1045.
This add support for reading primary information from lavc, categorized
into BT.601-525, BT.601-625, BT.709 and BT.2020; and passes it on to the
vo. In vo_opengl, we always generate the 3dlut against the wider BT.2020
and transform our source into this colorspace in the shader.
Make sure every video filter has valid parameters for input and output.
(This also ensures we don't take possibly invalid decoder output, or
feed invalid decodr/filter output to VOs.)
Also, the updated image size check now (almost) works like the
corresponding check in FFmpeg.
Until now, failure to allocate image data resulted in a crash (i.e.
abort() was called). This was intentional, because it's pretty silly to
degrade playback, and in almost all situations, the OOM will probably
kill you anyway. (And then there's the standard Linux overcommit
behavior, which also will kill you at some point.)
But I changed my opinion, so here we go. This change does not affect
_all_ memory allocations, just image data. Now in most failure cases,
the output will just be skipped. For video filters, this coincidentally
means that failure is treated as EOF (because the playback core assumes
EOF if nothing comes out of the video filter chain). In other
situations, output might be in some way degraded, like skipping frames,
not scaling OSD, and such.
Functions whose return values changed semantics:
mp_image_alloc
mp_image_new_copy
mp_image_new_ref
mp_image_make_writeable
mp_image_setrefp
mp_image_to_av_frame_and_unref
mp_image_from_av_frame
mp_image_new_external_ref
mp_image_new_custom_ref
mp_image_pool_make_writeable
mp_image_pool_get
mp_image_pool_new_copy
mp_vdpau_mixed_frame_create
vf_alloc_out_image
vf_make_out_image_writeable
glGetWindowScreenshot
Commit 5e4e248 added a mp_image_params field to mp_image, and moved many
parameters to that struct. display_w/h was left redundant with
mp_image_params.d_w/d_h. These fields were supposed to be always in
sync, but it seems some code forgot to do this correctly, such as
vf_fix_img_params() or mp_image_copy_attributes(). This led to the
problem in github issue #756, because display_w/_h could become
incorrect.
It turns out that most code didn't use the old fields anyway. Just
remove them. Note that mp_image_params.d_w/d_h are supposed to be always
valid, so the additional checks for 0 shouldn't be needed. Remove these
checks as well.
Fixes#756.
Image formats used to be FourCCs, so unsigned int was better. But now
it's annoying and the only difference is that unsigned int is more to
type than int.
In my opinion, config.h inclusions should be kept to a minimum. MPlayer
code really liked including config.h everywhere, though, even in often
used header files. Try to reduce this.
