This fixes a bug that caused the application to never leave it's frontmost
position.
The idea is stolen from @donmelton who used it in MPlayerShell. Thanks!
GetTimer() is generally replaced with mp_time_us(). Both calls return
microseconds, but the latter uses int64_t, us defined to never wrap,
and never returns 0 or negative values.
GetTimerMS() has no direct replacement. Instead the other functions are
used.
For some code, switch to mp_time_sec(), which returns the time as double
float value in seconds. The returned time is offset to program start
time, so there is enough precision left to deliver microsecond
resolution for at least 100 years. Unless it's casted to a float
(or the CPU reduces precision), which is why we still use mp_time_us()
out of paranoia in places where precision is clearly needed.
Always switch to the correct time. The whole point of the new timer
calls is that they don't wrap, and storing microseconds in unsigned int
variables would negate this.
In some cases, remove wrap-around handling for time values.
Make OS specific timer code export a mp_raw_time_us() function, and
add generic implementations of GetTimer()/GetTimerMS() using this
function. New mpv code is supposed to call mp_time_us() in situations
where precision is absolutely needed, or mp_time_s() otherwise.
Make it so that mp_time_us() will return a value near program start.
We don't set it to 0 though to avoid confusion with relative vs.
absolute time. Instead, pick an arbitrary offset.
Move the test program in timer-darwin.c to timer.c, and modify it to
work with the generic timer functions.
Also add a "raw" prefix for commands, which prevents property expansion.
The idea is that if the commands are generated by a program, it doesn't
have to know whether the command expands properties or not.
mpv crashed on quit when it was run using the bundle functionality and started
without any files thus waiting for file open events. In that case, since there
is no key_fifo initialized yet, short circuit to `terminate_cocoa_application()`
which is generally called from `exit_player()` during normal lifecycle.
Fixes bug report from user `eng` on IRC.
This commit is a followup on the previous one and uses a solution I like more
since it totally decouples the Cocoa code from mpv's core and tries to emulate
a generic Cocoa application's lifecycle as much as possible without fighting
the framework.
mpv's main is executed in a pthread while the main thread runs the native cocoa
event loop.
All of the thread safety is mainly accomplished with additional logic in
cocoa_common as to not increase complexity on the crossplatform parts of the
code.
Schedule mpv's playloop as a high frequency timer inside the main Cocoa event
loop. This has the benefit to allow accessing menus as well as resizing the
window without the playback being blocked and allows to remove countless hacks
from the code that involved manually pumping the event loop as well simulating
manually some of the Cocoa default behaviours.
A huge improvement consists in removing NSApplicationLoad. This is a C function
defined in the Cocoa header and implements a minimal OSX application under ther
hood so that you can use the Cocoa GUI toolkit from C/C++ without having to
respect the Cocoa standards in terms of application initialization. This was
bad because the behaviour implemented by NSApplicationLoad was hard to customize
and had several gotchas especially in the menu department.
mpv was changed to be just a nib-less application. All the Cocoa part is still
generated in code but the event handling is now not dissimilar to what is
present in a stock Mac application.
As a part of reviewing the initialization process, I also removed all of
`osdep/macosx_finder_args`. The useful parts of the code were moved to
`osdep/macosx_appication` which has the broaded responsibility of managing the
full lifecycle of the Cocoa application. By consequence the
`--enable-macosx-finder` configure switch was killed as well, as this feature
is always enabled.
Another change the users will notice is that when using a bundle the `--quiet`
option will be inserted much earlier in the initializaion process. This results
in mpv not spamming mpv.log anymore with all the initialization outputs.
Do this to reduce conflicts with <linux/input.h>, which contains some
conflicting defines.
This changes the meaning of MP_KEY_DOWN:
KEY_DOWN is renamed to MP_KEY_DOWN (cursor down key)
MP_KEY_DOWN is renamed to MP_KEY_STATE_DOWN (modifier for key down state)
This functionality looked smart but created problems with some kinds of
multi touch events. Moreover some events coming from the windows server – like
hovering a corner for window resize – didn't cause the player to wake up
immediately.
The "correct" non hacky way to implement async event polling with cocoa would
be having the vanilla cocoa event loop driving the player and setting up mpv's
terminal FDs as event sources for the cocoa event loop.
Fixes#20
Now, when backgrounded, mpv plays and outputs messages to stdout, but
statusline is not output.
Background<->foreground transitions are detected by signals and polling
the process groups.
This function sucks and apparently is not very portable (at least on
mingw, the configure check fails). Also remove the emulation of that
function from osdep/strsep*, and remove the configure check.
I have no idea when or how this broke, but _wstati64() is the function
we want anyway (64 bit filesize). Possibly this was a mingw-w64 bug.
It's unknown why "wstat()" just doesn't work in this case, as it's not
defined by MSDN and could be defined by mingw as it needs.
vsscanf() is in POSIX, C99, mingw, etc. Further, the implementation in
osdep/vsscanf.c was completely broken, and if it worked, it worked only
by chance.
Add `mp_find_config_file` to search different known paths and use that in
ass_mp to look for the fontconfig configuration file.
Some incidental changes spawned by this feature where:
* Buffer allocation for the strings containing the paths is now performed
with talloc. All of the allocations are done on a NULL context, but it still
improves readability of the code.
* Move the OSX function for lookup inside of a bundle: this code path was
currently not used by the bundle generated with `make osxbundle`. The plan
is to use it again in a future commit to get a fontconfig config file.
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
This changes the name of this project to mpv. Most user-visible mentions
of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the
default config file location are changed as well.
The new default config file location is: ~/.mpv/
Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI,
which has been removed from mplayer2 ages ago.
We don't have a logo, and the MS Windows resource files sort-of require
one, so leave etc/mplayer.ico/.xpm as-is.
Remove the debian and rpm packaging scripts. These contained outdated
dependencies and likely were more harmful than useful. (Patches which
add working and well-tested packaging are welcome.)
fixes issue with | less, where mplayer broke less's terminal
expectations and made less quit
Note this means that read() will be blocking again. Should be ok, as we
always check via select() before reading.
When files are double clicked or drag and dropped to the mplayer2 icon they
can be in random order. This commit forces alphabetical order.
Opening them with command + down arrow already worked correctly.
Remove variable that is only assigned but never used.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34791 b3059339-0415-0410-9bf9-f77b7e298cf2
Allow using a cache size of up to 4 TB.
Obviously anything close to 4 GB will always fail
on 32 bit systems.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34792 b3059339-0415-0410-9bf9-f77b7e298cf2
Replace off_t by int64_t in cache code.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34793 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove casts that are no longer necessary.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34794 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix header file after r34793.
Patch by Stephen Sheldon, sfsheldo gmail com.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34802 b3059339-0415-0410-9bf9-f77b7e298cf2
Put #include <inttypes.h> into the header file where it should be.
Reported by Stephen Sheldon, sfsheldo gmail com.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34798 b3059339-0415-0410-9bf9-f77b7e298cf2
Correct r34798.
The header only needs stdint.h while the C file needs inttypes.h.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34799 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: reimar
Use uncrustify on glob-win.c to fix the indentation mess in it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34239 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: reimar
Summary:
- There is no playtree anymore. It's reduced to a simple list.
- Options are now always global. You can still have per-file options,
but these are optional and require special syntax.
- The slave command pt_step has been removed, and playlist_next
and playlist_prev added. (See etc/input.conf changes.)
This is a user visible incompatible change, and will break slave-mode
applications.
- The pt_clear slave command is renamed to playlist_clear.
- Playtree entries could have multiple files. This is not the case
anymore, and playlist entries have always exactly one entry. Whenever
something adds more than one file (like ASX playlists or dvd:// or
dvdnav:// on the command line), all files are added as separate
playlist entries.
Note that some of the changes are quite deep and violent. Expect
regressions.
The playlist parsing code in particular is of low quality. I didn't try
to improve it, and merely spent to least effort necessary to keep it
somehow working. (Especially ASX playlist handling.)
The playtree code was complicated and bloated. It was also barely used.
Most users don't even know that mplayer manages the playlist as tree,
or how to use it. The most obscure features was probably specifying a
tree on command line (with '{' and '}' to create/close tree nodes). It
filled the player code with complexity and confused users with weird
slave commands like pt_up.
Replace the playtree with a simple flat playlist. Playlist parsers that
actually return trees are changed to append all files to the playlist
pre-order.
It used to be the responsibility of the playtree code to change per-file
config options. Now this is done by the player core, and the playlist
code is free of such details.
Options are not per-file by default anymore. This was a very obscure and
complicated feature that confused even experienced users. Consider the
following command line:
mplayer file1.mkv file2.mkv --no-audio file3.mkv
This will disable the audio for file2.mkv only, because options are
per-file by default. To make the option affect all files, you're
supposed to put it before the first file.
This is bad, because normally you don't need per-file options. They are
very rarely needed, and the only reasonable use cases I can imagine are
use of the encode backend (mplayer encode branch), or for debugging. The
normal use case is made harder, and the feature is perceived as bug.
Even worse, correct usage is hard to explain for users.
Make all options global by default. The position of an option isn't
significant anymore (except for options that compensate each other,
consider --shuffle --no-shuffle).
One other important change is that no options are reset anymore if a
new file is started. If you change settings with slave mode commands,
they will not be changed by playing a new file. (Exceptions include
settings that are too file specific, like audio/subtitle stream
selection.)
There is still some need for per-file options. Debugging and encoding
are use cases that profit from per-file options. Per-file profiles (as
well as per-protocol and per-VO/AO options) need the implementation
related mechanisms to backup and restore options when the playback file
changes.
Simplify the save-slot stuff, which is possible because there is no
hierarchical play tree anymore. Now there's a simple backup field.
Add a way to specify per-file options on command line. Example:
mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3
will have the following options per file set:
f1.mkv, f4.mkv: -o0 -o3
f2.mkv, f3.mkv: -o0 -o3 -o1 -o2
The options --{ and --} start and end per-file options. All files inside
the { } will be affected by the options equally (similar to how global
options and multiple files are handled). When playback of a file starts,
the per-file options are set according to the command line. When
playback ends, the per-file options are restored to the values when
playback started.
This was intended for translating filenames from filesystem charset to
the terminal charset. Modern sane platforms use UTF-8 for everything,
and on Windows we use unicode APIs, so this is not needed anymore.
Remove filename_recode, all uses of it, options and configure checks
related to terminal output charset, and code that tries to determine
the same.
Conflicts:
bstr.c
bstr.h
libvo/cocoa_common.m
libvo/gl_common.c
libvo/video_out.c
mplayer.c
screenshot.c
sub/subassconvert.c
Merge of cocoa_common.m done by pigoz.
Picking my version of screenshot.c. The fix in commit aadf1002f8 will
be redone in a follow-up commit, as the original commit causes too many
conflicts with the work done locally in this branch, and other work in
progress.
Add code to wake up the select() call in input.c when an OSX event is
available and a Cocoa OpenGL backend is initialized.
Fixes the slow response to input or other events in Cocoa-based VOs
during long select() sleeps (e.g., when mplayer2 is paused) introduced
by commit 7040968.
Use the *W variants instead of the implicit *A functions. (One could
define the UNICODE macro to switch the functions without suffix from
A to W, but I'm too lazy to figure out how portable that is, etc.)
Also make sure io.h defines a unicode aware printf().
Stop trying to read terminal input if a read attempt returns EOF. The
most important case where this matters is when someone runs the player
with stdin redirected from /dev/null and without specifying
--no-consolecontrols. This used to cause 100% CPU load while paused,
as select() would continuously trigger on stdin (the need for
--no-consolecontrols was not apparent to people with older mplayer
versions, as input reading was less efficient and latencies like
hardcoded sleeps kept CPU use well below 100%). Now this will only
cause a "Dead key input" error message.
Change the macosx_finder_args function so that when mplayer2 is
invoked from the Finder in a Mac application bundle, it redirects the
output to ~/Library/Logs/mplayer2.log instead of cluttering the global
system.log.
This doesn't affect terminal use which keeps writing to stdout and
stderr.
macosx_finder_args was using Carbon and wasn't usable any longer on
modern versions of MacOSX. This is very useful to embed mplayer in a
mac application bundle.
When using application bundles, the operating system will call the
main function with only one argument that identifies the process
serial number (this is some additional process identifier in osx other
than the pid). File open events are then dispatched to the application
through events that must be handled accordingly.
This assumes the terminal uses UTF-8. If invalid UTF-8 is encountered (for
example because the terminal uses a legacy encoding), the code falls back
to the old method and feeds each byte as key code to the input code.
In theory, UTF-8 input could randomly fail, because the code in getch2.c
doesn't try to fill the input buffer correctly with input sequences
longer than a byte. This is a problem with the design of the existing
code.
