This allows users to add their own near-arbitrary hooks to the vo_opengl
processing pipeline, greatly enhancing the flexibility of user shaders.
This enables, among other things, user shaders such as CrossBilateral,
SuperRes, LumaSharpen and many more.
To make parsing the user shaders easier, shaders are now loaded as
bstrs, and the hooks are set up during video reconfig instead of on
every single frame.
Remove non-texture_rg compatibility from LUT sampling. OpenGL without
texture_rg support will always trigger dumb-mode, and dumb-mode does not
use LUTs. It used not to, and that was when this made sense.
This merges all knowledge about texture format into a central table.
Most of the work done here is actually identifying which formats exactly
are supported by OpenGL(ES) under which circumstances, and keeping this
information in the format table in a somewhat declarative way. (Although
only to the extend needed by mpv.) In particular, ES and float formats
are a horrible mess.
Again this is a big refactor that might cause regression on "obscure"
configurations.
This uses EGL_ANGLE_stream_producer_d3d_texture_nv12 and related
extensions to map the D3D textures coming from the hardware decoder
directly in GL.
In theory this would be trivial to achieve, but unfortunately ANGLE does
not have a mechanism to "import" D3D textures as GL textures. Instead,
an awkward mechanism via EGL_KHR_stream was implemented, which involves
at least 5 extensions and a lot of glue code. (Even worse than VAAPI EGL
interop, and very far from the simplicity you get on OSX.)
The ANGLE mechanism so far supports only the NV12 texture format, which
means 10 bit won't work. It also does not work in ES3 mode yet. For
these reasons, the "old" ID3D11VideoProcessor code is kept and used as a
fallback.
gl_transform_vec() assumed column-major, while everything else seemed to
assumed row-major memory organization for gl_transform.m. Also,
gl_transform_trans() seems to contain additional confusion.
This didn't matter until now, as everything has been orthogonal, this
the swapped matrix entries were always 0.
Instead of reallocating almost all of the shader string several times
per pass, build it into a fixed buffer that will be reallocated as
needed.
While this still uses a linear search and full comparison of the shader
text, this will compare the shader's string length first before doing a
full comparison as a nice side effect. (That's also why the fragment
shader is compared first - it's more likely to be different for
different cache entries than the vertex shader stub.)
This is a pretty major rewrite of the internal texture binding
mechanic, which makes it more flexible.
In general, the difference between the old and current approaches is
that now, all texture description is held in a struct img_tex and only
explicitly bound with pass_bind. (Once bound, a texture unit is assumed
to be set in stone and no longer tied to the img_tex)
This approach makes the code inside pass_read_video significantly more
flexible and cuts down on the number of weird special cases and
spaghetti logic.
It also has some improvements, e.g. cutting down greatly on the number
of unnecessary conversion passes inside pass_read_video (which was
previously mostly done to cope with the fact that the alternative would
have resulted in a combinatorial explosion of code complexity).
Some other notable changes (and potential improvements):
- texture expansion is now *always* handled in pass_read_video, and the
colormatrix never does this anymore. (Which means the code could
probably be removed from the colormatrix generation logic, modulo some
other VOs)
- struct fbo_tex now stores both its "physical" and "logical"
(configured) size, which cuts down on the amount of width/height
baggage on some function calls
- vo_opengl can now technically support textures with different bit
depths (e.g. 10 bit luma, 8 bit chroma) - but the APIs it queries
inside img_format.c doesn't export this (nor does ffmpeg support it,
really) so the status quo of using the same tex_mul for all planes is
kept.
- dumb_mode is now only needed because of the indirect_fbo being in the
main rendering pipeline. If we reintroduce p->use_indirect and thread
a transform through the entire program this could be skipped where
unnecessary, allowing for the removal of dumb_mode. But I'm not sure
how to do this in a clean way. (Which is part of why it got introduced
to begin with)
- It would be trivial to resurrect source-shader now (it would just be
one extra 'if' inside pass_read_video).
Why was this done so stupidly, with so many complicated special cases,
before? Declare it once so the shader bits don't have to figure out where
and when to do so themselves.
GLES requires this. Some more common sampler types have default
precisions, but not usampler2D. Newer ANGLE builds verify this more
strictly than older builds, so this wasn't caught before.
Fixes#2761.
GLES does not support high bit depth fixed point textures for unknown
reasons, so direct 10 bit input is not possible. But we can still use
integer textures, which are supported by GLES 3.0. These store integer
data just like the standard fixed point textures, except they are not
normalized on sampling. They also don't support bilinear filtering, and
require a special sampler ("usampler2D").
While these texture formats enable us to shuffle the data to the GPU,
they're rather impractical with the requirements mentioned above and our
current architecture. One problem is that most code assumes it can
always use bilinear scaling (even if bilinear is never used when using
appropriate scale/cscale options). Another is that we don't have any
concept of running a function on a texture in an uniform way.
So for now, run a simple conversion step through a FBO. The FBO will use
the rgba16f format normally, which gives enough bits for 10 bit, and
will at least gracefully degrade with higher depth input.
This is bound to be much slower than a more "direct" method, but at
least it works and is simple to implement.
The odd change of function call order in init_video() is to properly
disable "dumb mode" (no FBO use) if these texture formats are in use.
Do this to make the license situation less confusing.
This change should be of no consequence, since LGPL is compatible with
GPL anyway, and making it LGPL-only does not restrict the use with GPL
code.
Additionally, the wording implies that this is allowed, and that we can
just remove the GPL part.
GLSL in GLES 2.0 did not have line continuation in its preprocessor.
This broke shader compilation. It also broke subtitle rendering in
vo_rpi, which reuses some of the OpenGL code.
Line continuation was finally added in GLES 3.0, which is perhaps the
reason why ANGLE accepted it.
The recent LUT adjustment changes broke interpolation.
The concatenation of the shader stages is a bit messy, and it seems like
sampler_prelude is not a good place to add this macro. Always add the
macro to every shader instead. (While this doesn't seem too elegant,
this isn't too inelegant either, and goes these problems out of the
way.)
While desktop GL's glTexImage2D() essentially accepts anything, GLES is
much stricter. The combination of allowed formats/types/internal formats
is exactly specified. The GLES 3.0.4 specification lists them in
table 3.2. (The ANGLE API validation code references this table.)
The table could probably be extended into a general declarative table
about GL formats covering other uses, but this would be a big
non-trivial project, so don't bother and accept a minor degree
of duplication with other tables.
Note that the format and type do (or should) not matter here, because
no image data is transferred to the GPU.
Implement NNEDI3, a neural network based deinterlacer.
The shader is reimplemented in GLSL and supports both 8x4 and 8x6
sampling window now. This allows the shader to be licensed
under LGPL2.1 so that it can be used in mpv.
The current implementation supports uploading the NN weights (up to
51kb with placebo setting) in two different way, via uniform buffer
object or hard coding into shader source. UBO requires OpenGL 3.1,
which only guarantee 16kb per block. But I find that 64kb seems to be
a default setting for recent card/driver (which nnedi3 is targeting),
so I think we're fine here (with default nnedi3 setting the size of
weights is 9kb). Hard-coding into shader requires OpenGL 3.3, for the
"intBitsToFloat()" built-in function. This is necessary to precisely
represent these weights in GLSL. I tried several human readable
floating point number format (with really high precision as for
single precision float), but for some reason they are not working
nicely, bad pixels (with NaN value) could be produced with some
weights set.
We could also add support to upload these weights with texture, just
for compatibility reason (etc. upscaling a still image with a low end
graphics card). But as I tested, it's rather slow even with 1D
texture (we probably had to use 2D texture due to dimension size
limitation). Since there is always better choice to do NNEDI3
upscaling for still image (vapoursynth plugin), it's not implemented
in this commit. If this turns out to be a popular demand from the
user, it should be easy to add it later.
For those who wants to optimize the performance a bit further, the
bottleneck seems to be:
1. overhead to upload and access these weights, (in particular,
the shader code will be regenerated for each frame, it's on CPU
though).
2. "dot()" performance in the main loop.
3. "exp()" performance in the main loop, there are various fast
implementation with some bit tricks (probably with the help of the
intBitsToFloat function).
The code is tested with nvidia card and driver (355.11), on Linux.
Closes#2230
Add the Super-xBR filter for image doubling, and the prescaling framework
to support it.
The shader code was ported from MPDN extensions project, with
modification to process luma only.
This commit is largely inspired by code from #2266, with
`gl_transform_trans()` authored by @haasn taken directly.
The removal of source-shader is a side effect, since this effectively
replaces it - and the video-reading code has been significantly
restructured to make more sense and be more readable.
This means users no longer have to constantly download and maintain a
separate deband.glsl installation alongside mpv, which was the only real
use case for source-shader that we found either way.
