Make it more straightforward by always calculating top offset first
instead of having two branches, that tries to calc it directly.
This also fixes missing negative check before `\033[%dA` which was in
practice only problem on macOS which was handling negative values, while
in fact it shouldn't.
Fixes: #13484
Using the 'terminal-default' log level a client can request
to get all messages that would normally appear on the terminal.
8c2d73f112 changed the size of the
relevant buffer to 100 lines, which was prone to quickly overflowing
once you enable verbose or debug output.
This size is kept for the early terminal buffer but now enlarged
once a client actually requests this log level. This fixes the overflow
risk while not consuming more resources if this feature is unused.
This prevents mp_msg_flush_status_line() from printing an unnecessary
newline when changing file after setting --really-quiet at runtime. If
mpv is backgrounded, this newline garbles the output of TUI programs.
With this change the cursor is not re-enabled after setting
--really-quiet at runtime and quitting with mpv in the foreground, so
enable it on uninit.
In theory bstr_split_utf8 should skip invalid sequence and move further,
but it doesn't do that currently, so just the string if unsuported code if
found.
Fixes infinite loop on code.len == 0 condition.
Fixes: 5864b72d1a
- prepare string before printing
- reduce amount of fflush(), especially for multiline messages
- clear status line and keep it always at the bottom
- indent module name to the longest value
- disable cursor for status line
- properly support wrapped status line
Overall makes status line less flickering and remove stray status
instead of scrolling them up.
I'd like some names to be more descriptive, but to work with 15 chars
limit we have to make some sacrifice.
Also because of the limit, remove the `mpv/` prefix and prioritize
actuall thread name.
since i was going to fix the include order of stdatomic, might as well
sort the surrouding includes in accordance with the project's coding
style.
some headers can sometime require specific include order. standard
library headers usually don't. but mpv might "hack into" the standard
headers (e.g pthreads) so that complicates things a bit more.
hopefully nothing breaks. if it does, the style guide is to blame.
replace it with <stdatomic.h> and replace the mp_atomic_* typedefs with
explicit _Atomic qualified types.
also add missing config.h includes on some files.
The timestamps when making a log file is actually dependent on
MP_START_TIME. This is a 10 microsecond offset that was added to the
timer as an offset. With the nanosecond change, this unit needs to be
converted as well so the offset is the same as before. After doing that,
we need to change the various mp_time_us calls in msg to mp_time_ns and
do the right conversion. This fixes the logs timestamps (i.e. so they
aren't negative anymore).
mpv has a convention of printing everything to stdout. The reasons for
this are pretty unclear and in certain situations rather unintuitive. It
leads to some bad behavior in fringe cases with encoding mode and isn't
the norm for programs so just adjust it so warnings and up are printed
to stderr. Fixes#8608.
Previously, if log-file was set not via a CLI option (e.g. set via
mpv.conf or other config file, or set from a script init phase),
then meaningful early log messages were thrown away because the log
file name was unknown initially.
Such early log messages include the command line arguments, any
options set from mpv.conf, and possibly more.
Now we store up to 5000 early messages before the log file name is
known, and flush them once/if it becomes known, or destroy this
buffer once mpv init is complete.
The implementation is similar and adjacent, but not identical, to an
existing early log system for mpv clients which request a log buffer.
In debug mode the macro causes an assertion failure.
In release mode it works differently and tells the compiler that it can
assume the codepath will never execute. For this reason I was conversative
in replacing it, e.g. in mpv-internal code that exhausts all valid values
of an enum or when a condition is clear from directly preceding code.
if log-file and really-quiet options were used together it could lead to
a completely empty log-file. this is unexpected because we need the
log-file option to work in all cases and produces at least a log of
verbosity -v -v. this is a regression of commit
a600d152d2
move the really quiet check back up, so it's set before the evaluation
of the actual log level, where check for log file, terminal, etc take
place.
This simply printf()s a concatenation of the provided string and the
relevant escape sequences. No idea what exactly defines this escape
sequence (is it just a xterm thing that is now supported relatively
widely?), and this simply uses information provided on the linked github
issue.
Not much of an advantage over --term-status-msg, though at least this
can have a lower update frequency. Also I may consider setting a default
value, and then it shouldn't conflict with the status message.
Fixes: #1725
Sometimes it's helpful to override this for specific mp_log instances,
because in some specific circumstances you just want to suppress log
file noise you never want to see.
-1 is an allowed value (for suppressing MSGL_FATAL==0). It looks like
the libplacebo wrapper still does this wrong, so it will probably
trigger UB in some cases. I guess I don't care, though.
This is a central lock (that is to stay and has no reason to go away),
and it was simply made global. This reduces complexity when the original
MPlayer code was changed from single thread + global state to a context
handle.
Having the global lock was still a bit silly if there were multiple mpv
instances in the process, because it would make the instances wait for
each other for no reason. So move it to the per-instance context, which
is trivial enough.
The wakeup_log_file callback was still assuming that mp_msg_lock was
used to control the log file thread, but this changed while I was
writing this code, and forgot to update it. (It doesn't change any
state, which is untypical for condition variable usage. The state that
is changed is protected by another lock instead. But log_file_lock still
needs to be acquired to ensure the signal isn't sent while the thread is
right before the pthread_cond_wait() call, when the lock is held, but
the signal would still be lost.)
Because the buffer's wakeup callback now acquires the lock, the wakeup
callback must be called outside of the buffer lock, to keep the lock
order (log_file_lock > mp_log_buffer.lock). Fortunately, the wakeup
callback is immutable, or we would have needed another dumb leaf lock.
mp_msg_has_log_file() made a similar outdated assumption. But now access
to the log_file field is much trickier; just define that it's only to be
called from the thread that manages the msg state. (The calling code
could also just check whether the log-file option changed instead, but
currently that would be slightly more messy.)
Until now --log-file performed a blocking write to the log file, which
made any calling thread block for I/O. It even explicitly flushed after
every line (to make it tail-able, or to ensure a hard crash wouldn't
lose any of the output). This wasn't so good, because it could cause
real playback problems, which made it infeasible to enable it by
default.
Try to buffer it through a ring buffer and a thread. There's no other
choice but to use a thread, since async I/O on files is generally a big
and unportable pain. (We very much prefer portable pain.) Fortunately,
there's already a ring buffer (mp_log_buffer, normally for the client
API logging hook). This still involves some pretty messy locking. Give
each mp_log_buffer its own lock to make this easier.
This still makes calling threads block if the log buffer is full (unlike
with client API log buffers, which just drop messages). I don't want log
messages to get lost for this purpose. This also made locking pretty
complicated (without it, mp_log_buffer wouldn't have needed its own
lock). Maybe I'll remove this blocking again when it turns out to be
nonsense.
(We could avoid wasting an entire thread by "reusing" some other thread.
E.g. pick some otherwise not real time thread, and make it react to the
log buffer's wakeup callback. But let's not. It's complicated to abuse
random threads for this. It'd also raise locking complexity, because we
still want it to block on a full buffer.)
console.lua uses "terminal-default" logging, which is supposed to return
all messages logged to the terminal to the API. Internally, this is
translated to MP_LOG_BUFFER_MSGL_TERM, which is MSGL_MAX+1, because it's
not an actual log level (blame C for not having proper sum types or
something).
Unfortunately, this unintentionally raised the internal log level to
MSGL_MAX+1. It still functioned as intended, because log messages were
simply filtered at a "later" point. But it led to every message being
formatted even if not needed. More importantly, it made mp_msg_test()
pointless (code calls this to avoid logging in "expensive" cases and if
the messages would just get discarded). Also, this broke libplacebo
logging, because the code to map the log messages did not expect a level
higher than MSGL_MAX (mp_msg_level() returned MSGL_MAX+1 too).
Fix this by not letting the dummy level value be used as log level.
Messages at terminal log level will always make it to the inner log
message dispatcher function (i.e. mp_msg_va() will call
write_msg_to_buffers()), so log buffers which use the dummy log level
don't need to adjust the actual log level at all.
It did that because there was no other way. It used a lock-free ring
buffer, which does not support this. Use a "manual" ring buffer with
explicit locks instead, and drop messages from the start.
(We could have continued to use mp_ring, but it was already too late,
and although mp_ring is fine, using it for types other than bytes looked
awkward, and writing a ring buffer yet again seemed nicer. At least it's
not C++, where mp_ring would have been a template, and everything would
have looked like shit soup no matter what.)
In the referenced commit, I forgot about this part, and a client which
tried to use this was actually not woken up when needed.
(Also why the hell does the subject line of that commit say "removed"?)
Fixes: 8c2d73f112
As preparation for making repl.lua part of the core (maybe), add some
mechanisms which are supposed to improve its behavior.
Add a silent mode. Calling mpv_request_log_messages() with the log level
name prefixed with "silent:" will disable logging from the API user's
perspective. But it will keep the log buffer, and record new messages,
without returning them to the user. If logging is enabled again by
requesting the same log level without "silent:" prefix, the buffered log
messages are returned to the user at once. This is not documented,
because it's far too messy and special as that I'd want anyone to rely
on this behavior, but it will be perfectly fine for an internal script.
Another thing is that we record early startup messages. The goal is to
make the repl.lua script show option and config parsing file errors.
This works only with the special "terminal-default" log level.
In addition, reduce the "terminal-default" capacity to only 100 log
messages. If this is going to be enabled by default, it shouldn't use
too much resources.
Before this commit, the status line used terminal control codes only if
stderr was a terminal. I'm not sure why this was done, and git blame
tracks it back to a huge commit by me, which changed all of the terminal
handling.
A user complained, so just stop treating this specially for no reason.
Fixes: #6617
Kacper Michajłow