github/mpv
1
Fork 0
mirror of https://github.com/mpv-player/mpv synced 2024-11-18 21:16:10 +01:00
Code Releases Activity
f36a5a88d0
mpv/DOCS/man/en/options.rst

2364 lines
92 KiB
ReStructuredText
Raw Normal View History

manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--a52drc=<level>
Select the Dynamic Range Compression level for AC-3 audio streams. <level>
is a float value ranging from 0 to 1, where 0 means no compression and 1
(which is the default) means full compression (make loud passages more
silent and vice versa). Values up to 2 are also accepted, but are purely
experimental. This option only shows an effect if the AC-3 stream contains
the required range compression information.
--abs=<value>
(``--ao=oss`` only) (OBSOLETE)
Override audio driver/card buffer size detection.
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
--ad=<[+|-]family1:(*|decoder1),[+|-]family2:(*|decoder2),...[-]>
Specify a priority list of audio decoders to be used, according to their
family and decoder name. Entries like ``family:*`` prioritize all decoders
of the given family. When determining which decoder to use, the first
decoder that matches the audio format is selected. If that is unavailable,
the next decoder is used. Finally, it tries all other decoders that are not
explicitly selected or rejected by the option.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
``-`` at the end of the list suppresses fallback to other available
decoders not on the ``--ad`` list. ``+`` in front of an entry forces the
decoder. Both of these shouldn't normally be used, because they break
normal decoder auto-selection!
``-`` in front of an entry disables selection of the decoder.
*EXAMPLE*:
``--ad=lavc:mp3float``
Prefer the FFmpeg/Libav ``mp3float`` decoder over all other mp3
decoders.
``--ad=spdif:ac3,lavc:*``
Always prefer spdif AC3 over FFmpeg/Libav over anything else.
``--ad=help``
List all available decoders.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--af=<filter1[=parameter1:parameter2:...],filter2,...>
Specify a list of audio filters to apply to the audio stream. See
DOCS: Fix some rst error messages Unfortunately, these do not fix the man page indent issue.
2012-11-29 17:03:48 +01:00
`audio_filters` for details and descriptions of the available filters.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
The option variants ``--af-add``, ``--af-pre``, ``--af-del`` and
``--af-clr`` exist to modify a previously specified list, but you
shouldn't need these for typical use.
--af-adv=<force=(0-7):list=(filters)>
See also ``--af``.
Specify advanced audio filter options:
force=<0-7>
Forces the insertion of audio filters to one of the following:
0
Use completely automatic filter insertion (currently identical to
1).
1
Optimize for accuracy (default).
2
Optimize for speed. *Warning*: Some features in the audio filters
may silently fail, and the sound quality may drop.
3
Use no automatic insertion of filters and no optimization.
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
*Warning*: It may be possible to crash mpv using this setting.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
4
Use automatic insertion of filters according to 0 above, but use
floating point processing when possible.
5
Use automatic insertion of filters according to 1 above, but use
floating point processing when possible.
6
Use automatic insertion of filters according to 2 above, but use
floating point processing when possible.
7
Use no automatic insertion of filters according to 3 above, and
use floating point processing when possible.
list=<filters>
Same as ``--af``.
options: accept "yes" and "no" only for flags This removes the alternative values like "off", "0", "false" etc., and also the non-English versions of these. This is done for general consistency. It's better to have a single way of doing things when multiple ways don't add singificant value. Also update some choices for consistency.
2012-09-18 15:50:24 +02:00
--aid=<ID|auto|no>
Select audio channel. ``auto`` selects the default, ``no`` disables audio.
options: change --vid, --aid, --sid options The --vid, --aid, --sid options now accept the values 'off' and 'auto', instead of having the user deal with the numeric values -2 and -1. The numeric values are not allowed anymore. Remove the --audio option. It was probably meant as compensation option for --no-audio. There are no such options for sub/video, and it was not documented, so just remove it. The replacement is "--aid=auto". Also do some updates to the manpage.
2012-09-05 02:39:12 +02:00
See also ``--alang``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--alang=<languagecode[,languagecode,...]>
Specify a priority list of audio languages to use. Different container
formats employ different language codes. DVDs use ISO 639-1 two letter
language codes, Matroska, MPEG-TS and NUT use ISO 639-2 three letter
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
language codes while OGM uses a free-form identifier. mpv prints the
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
available languages when run in verbose (``-v``) mode. See also ``--aid``.
*EXAMPLE*:
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
``mpv dvd://1 --alang=hu,en``
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Chooses the Hungarian language track on a DVD and falls back on
English if Hungarian is not available.
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
``mpv --alang=jpn example.mkv``
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Plays a Matroska file in Japanese.
--ao=<driver1[:suboption1[=value]:...],driver2,...[,]>
Specify a priority list of audio output drivers to be used. For
interactive use you'd normally specify a single one to use, but in
configuration files specifying a list of fallbacks may make sense. See
DOCS: Fix some rst error messages Unfortunately, these do not fix the man page indent issue.
2012-11-29 17:03:48 +01:00
`audio_outputs` for details and descriptions of available drivers.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--aspect=<ratio>
Override movie aspect ratio, in case aspect information is incorrect or
man: remove documentation for deleted stuff Also make some minor cosmetic changes.
2012-08-02 19:31:33 +02:00
missing in the file being played. See also ``--no-aspect``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
*EXAMPLE*:
- ``--aspect=4:3`` or ``--aspect=1.3333``
- ``--aspect=16:9`` or ``--aspect=1.7777``
--ass, --no-ass
manpage: document the dangers of some subtitle options Setting some subtitle options may lead to incorrect rendering of complex ASS subtitle scripts, such as displaced signs or visual artifacts. The user should be made aware that this can happen. In theory, libass could make using some of these options relatively safe, but it doesn't. Note that there are potentially much more options that could in theory break subtitle rendering, but add a warning only to the most fragile ones.
2013-01-04 16:19:49 +01:00
Render ASS subtitles natively, and convert text subtitles in other formats
to ASS internally (enabled by default).
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
manpage: document the dangers of some subtitle options Setting some subtitle options may lead to incorrect rendering of complex ASS subtitle scripts, such as displaced signs or visual artifacts. The user should be made aware that this can happen. In theory, libass could make using some of these options relatively safe, but it doesn't. Note that there are potentially much more options that could in theory break subtitle rendering, but add a warning only to the most fragile ones.
2013-01-04 16:19:49 +01:00
If ``--no-ass`` is specified, all subtitles are converted to plain text
internally. All tags and style declarations are stripped and ignored. The
subtitle renderer uses the font style as specified by the ``--sub-text-``
options instead.
*NOTE*: Using ``--no-ass`` may lead to incorrect or completely broken
rendering of ASS/SSA subtitles. It can sometimes be useful to forcibly
override the styling of ASS subtitles, but should be avoided in general.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--ass-force-style=<[Style.]Param=Value[,...]>
Override some style or script info parameters.
*EXAMPLE*:
- ``--ass-force-style=FontName=Arial,Default.Bold=1``
- ``--ass-force-style=PlayResY=768``
manpage: document the dangers of some subtitle options Setting some subtitle options may lead to incorrect rendering of complex ASS subtitle scripts, such as displaced signs or visual artifacts. The user should be made aware that this can happen. In theory, libass could make using some of these options relatively safe, but it doesn't. Note that there are potentially much more options that could in theory break subtitle rendering, but add a warning only to the most fragile ones.
2013-01-04 16:19:49 +01:00
*NOTE*: Using this option may lead to incorrect subtitle rendering.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--ass-hinting=<type>
Set hinting type. <type> can be:
:0: no hinting
:1: FreeType autohinter, light mode
:2: FreeType autohinter, normal mode
:3: font native hinter
The default value is 0 (no hinting).
--ass-line-spacing=<value>
Set line spacing value for SSA/ASS renderer.
--ass-styles=<filename>
Load all SSA/ASS styles found in the specified file and use them for
rendering text subtitles. The syntax of the file is exactly like the ``[V4
Styles]`` / ``[V4+ Styles]`` section of SSA/ASS.
manpage: document the dangers of some subtitle options Setting some subtitle options may lead to incorrect rendering of complex ASS subtitle scripts, such as displaced signs or visual artifacts. The user should be made aware that this can happen. In theory, libass could make using some of these options relatively safe, but it doesn't. Note that there are potentially much more options that could in theory break subtitle rendering, but add a warning only to the most fragile ones.
2013-01-04 16:19:49 +01:00
*NOTE*: Using this option may lead to incorrect subtitle rendering.
sub: add --ass-style-override option to disable style overrides There are a number of options which modify ASS subtitle rendering. Most of these do things that can interfere with the styling done by subtitle scripts, resulting in incorrect rendering. Add the --ass-style-override option to make it easy to disable all overrides. This helps trouble- shooting, and makes it more practical to use the override features. (You can simply toggle the ass-style-override property at runtime, should one of the style override options break subtitle rendering at a certain point.) This mainly affects whether most --ass-* options are applied, as well as --sub-pos. Some things, like explicit style overrides loaded with --ass-force-style, can't be changed at runtime using the ass-style-override property.
2012-10-11 02:23:29 +02:00
--ass-style-override=<yes|no>
Control whether user style overrides should be applied.
:yes: Apply all the ``--ass-*`` style override options. Changing the default
for any of these options can lead to incorrect subtitle rendering.
(Default.)
:no: Render subtitles as forced by subtitle scripts.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--ass-use-margins
Enables placing toptitles and subtitles in black borders when they are
available.
--ass-vsfilter-aspect-compat
Stretch SSA/ASS subtitles when playing anamorphic videos for compatibility
with traditional VSFilter behavior. This switch has no effect when the
video is stored with square pixels.
The renderer historically most commonly used for the SSA/ASS subtitle
formats, VSFilter, had questionable behavior that resulted in subtitles
being stretched too if the video was stored in anamorphic format that
required scaling for display. This behavior is usually undesirable and
newer VSFilter versions may behave differently. However, many existing
scripts compensate for the stretching by modifying things in the opposite
direction. Thus if such scripts are displayed "correctly" they will not
appear as intended. This switch enables emulation of the old VSFilter
behavior (undesirable but expected by many existing scripts).
Enabled by default.
--audio-demuxer=<[+]name>
Force audio demuxer type when using ``--audiofile``. Use a '+' before the
name to force it, this will skip some checks! Give the demuxer name as
printed by ``--audio-demuxer=help``. ``--audio-demuxer=audio`` forces MP3.
core: allow disabling display of "album art" in audio files ffmpeg pretends that image attachments (such as contained in ID3v2 metadata) are video streams. It injects the attached pictures as packets into the packet stream received with av_read_frame(). Add the --audio-display option to allow configuring whether attached pictures should be displayed. The default behavior doesn't change (images are displayed). Identify video streams, that are actually image attachments, with "[P]" in the terminal output. Modify the default stream selection such that real video streams are preferred over attached pictures. (This is just for robustness; I do not know of any samples where images are added before actual video streams and could lead to bad default stream selection with the old code.)
2012-12-10 18:52:06 +01:00
--audio-display=<no|attachment>
Setting this option to ``attachment`` (default) will display image
attachments when playing audio files. It will display the first image
found, and additional images are available as video streams.
Setting this option to ``no`` disables display of video entirely when
playing audio files.
This option has no influence on files with normal video tracks.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--audiofile=<filename>
Play audio from an external file (WAV, MP3 or Ogg Vorbis) while viewing a
movie.
--audiofile-cache=<kBytes>
Enables caching for the stream used by ``--audiofile``, using the
specified amount of memory.
video: add --autofit and --autofit-larger options --autofit=WxH sets the window size to a maximum width and/or height, without changing the window's aspect ratio. --autofit-larger=WxH does the same, but only if the video size is actually larger than the window size that would result when using the --autofit=WxH option with the same arguments.
2013-01-23 10:56:36 +01:00
--autofit=<[W[xH]]>
Set the initial window size to a maximum size specified by WxH, without
changing the window's aspect ratio. The size is measured in pixels, or if
a number is followed by a percentage sign (``%``), in percents of the
screen size.
This option never changes the aspect ratio of the window. If the aspect
ratio mismatches, the window's size is reduced until it fits into the
specified size.
Window position is not taken into account, nor is it modified by this
option (the window manager still may place the window differently depending
on size). Use ``--geometry`` to change the window position. Its effects
are applied after this option.
See ``--geometry`` for details how this is handled with multi-monitor
x11_common: always create a window, even with --wid The --wid switch (for embedding the player into other applications) didn't create a new window, and instead tried to use the window that was passed via --wid directly. This made the code more complex, caused strange X errors (mpv and host application fighting for exclusive X resources), and actually could cause issues if the --wid window wasn't created with the X Visual needed for OpenGL. Always create a window instead. This makes it always possible to embed the player into foreign windows. --geometry doesn't work anymore - the controlling application should always create a new window to place the player inside it, and can control the video window by moving and resizing this window. w32_common.c actually did this right, and always creates a new window.
2013-02-24 23:35:13 +01:00
setups.
video: add --autofit and --autofit-larger options --autofit=WxH sets the window size to a maximum width and/or height, without changing the window's aspect ratio. --autofit-larger=WxH does the same, but only if the video size is actually larger than the window size that would result when using the --autofit=WxH option with the same arguments.
2013-01-23 10:56:36 +01:00
Use ``--autofit-larger`` instead if you don't want the window to get larger.
Use ``--geometry`` if you want to force both window width and height to a
specific size.
*NOTE*: Generally only supported by GUI VOs. Ignored for encoding.
*EXAMPLE*:
``70%``
Make the window width 70% of the screen size, keeping aspect ratio.
``1000``
Set the window width to 1000 pixels, keeping aspect ratio.
``70%:60%``
Make the window as large as possible, without being wider than 70% of
the screen width, or higher than 60% of the screen height.
--autofit-larger=<[W[xH]]>
This option behaves exactly like ``--autofit``, except the window size is
only changed if the window would be larger than the specified size.
*EXAMPLE*:
``90%x80%``
If the video is larger than 90% of the screen width or 80% of the
screen height, make the window smaller until either its width is 90%
of the screen, or its height is 80% of the screen.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--autosub, --no-autosub
Load additional subtitle files matching the video filename. Enabled by
options: rename -sub-fuzziness to -autosub-match, change option values "--autosub-match" is close to "--autosub", and reflects what this option does slightly better. Replace the magic number option values with choices: --sub-fuzziness=0 becomes --autosub-match=exact --sub-fuzziness=1 becomes --autosub-match=fuzzy --sub-fuzziness=2 becomes --autosub-match=all
2012-11-15 19:08:21 +01:00
default. See also ``--autosub-match``.
--autosub-match=<exact|fuzzy|all>
Adjust matching fuzziness when searching for subtitles:
:exact: exact match
:fuzzy: Load all subs containing movie name.
:all: Load all subs in the current and ``--sub-paths`` directories.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
sub: remove vobsub reader in favor of ffmpeg vobsub demuxer ffmpeg recently added a demuxer that can read vobsubs (pairs of .sub and .idx files). Get rid of the internal vobsub reader, and use the ffmpeg demuxer instead. Sneak in an unrelated manpage change (autosub default).
2012-12-08 13:59:49 +01:00
(Default: exact.)
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--autosync=<factor>
Gradually adjusts the A/V sync based on audio delay measurements.
Specifying ``--autosync=0``, the default, will cause frame timing to be
based entirely on audio delay measurements. Specifying ``--autosync=1``
will do the same, but will subtly change the A/V correction algorithm. An
man: remove documentation for deleted stuff Also make some minor cosmetic changes.
2012-08-02 19:31:33 +02:00
uneven video framerate in a movie which plays fine with ``--no-audio`` can
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
often be helped by setting this to an integer value greater than 1. The
man: remove documentation for deleted stuff Also make some minor cosmetic changes.
2012-08-02 19:31:33 +02:00
higher the value, the closer the timing will be to ``--no-audio``. Try
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
``--autosync=30`` to smooth out problems with sound drivers which do not
implement a perfect audio delay measurement. With this value, if large A/V
sync offsets occur, they will only take about 1 or 2 seconds to settle
out. This delay in reaction time to sudden A/V offsets should be the only
side-effect of turning this option on, for all sound drivers.
--bandwidth=<Bytes>
Specify the maximum bandwidth for network streaming (for servers that are
able to send content in different bitrates). Useful if you want to watch
live streamed media behind a slow connection. With Real RTSP streaming, it
is also used to set the maximum delivery bandwidth allowing faster cache
filling and stream dumping.
manpage: cleanup Removing text about things that have been removed from the code long ago, other fixes.
2012-10-24 01:06:00 +02:00
*NOTE*: probably broken/useless.
man: remove documentation for deleted stuff Also make some minor cosmetic changes.
2012-08-02 19:31:33 +02:00
--untimed
Do not sleep when outputting video frames. Useful for benchmarks when used
with --no-audio.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--bluray-angle=<ID>
Some Blu-ray discs contain scenes that can be viewed from multiple angles.
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
Here you can tell mpv which angles to use (default: 1).
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--bluray-chapter=<ID>
(Blu-ray only)
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
Tells mpv which Blu-ray chapter to start the current title from
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
(default: 1).
--bluray-device=<path>
(Blu-ray only)
Specify the Blu-ray disc location. Must be a directory with Blu-ray
structure.
--border, --no-border
Play movie with window border and decorations. Since this is on by
default, use ``--no-border`` to disable the standard window decorations.
--brightness=<-100-100>
Adjust the brightness of the video signal (default: 0). Not supported by
all video output drivers.
--cache=<kBytes>
Enable caching of the input stream (if not already enabled) and set the
size of the cache in kilobytes. Caching is enabled by default (with a
default cache size) for network streams. May be useful when playing files
from slow media, but can also have negative effects, especially with file
man: remove documentation for deleted stuff Also make some minor cosmetic changes.
2012-08-02 19:31:33 +02:00
formats that require a lot of seeking, such as mp4. See also ``--no-cache``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
core: automatically pause on low cache When the cache fill status goes below a certain threshold, automatically pause the player. When the cache is filled again, unpause again. This is intended to help with streaming from http. It's better to pause a while, rather than exposing extremely crappy behavior when packet reads during decoding block the entire player. In theory, we should try to increase the cache if underruns happen too often. Unfortunately, changing the cache implementation would be very hard, because it's insane code (forks, uses shared memory and "volatile" etc.). So for now, this just reduces the frequency of the stuttering if the network is absolutely too slow to play the stream in realtime.
2012-12-02 00:22:54 +01:00
--cache-pause=<no|percentage>
If the cache percentage goes below the specified value, pause and wait
until the percentage set by ``--cache-min`` is reached, then resume
playback (default: 10). If ``no`` is specified, this behavior is disabled.
When the player is paused this way, the status line shows ``Buffering``
instead of ``Paused``, and the OSD uses a clock symbol instead of the
normal paused symbol.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--cache-min=<percentage>
Playback will start when the cache has been filled up to <percentage> of
core: automatically pause on low cache When the cache fill status goes below a certain threshold, automatically pause the player. When the cache is filled again, unpause again. This is intended to help with streaming from http. It's better to pause a while, rather than exposing extremely crappy behavior when packet reads during decoding block the entire player. In theory, we should try to increase the cache if underruns happen too often. Unfortunately, changing the cache implementation would be very hard, because it's insane code (forks, uses shared memory and "volatile" etc.). So for now, this just reduces the frequency of the stuttering if the network is absolutely too slow to play the stream in realtime.
2012-12-02 00:22:54 +01:00
the total (default: 20).
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--cache-seek-min=<percentage>
If a seek is to be made to a position within <percentage> of the cache
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
size from the current position, mpv will wait for the cache to be
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
filled to this position rather than performing a stream seek (default:
50).
--cdda=<option1:option2>
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
This option can be used to tune the CD Audio reading feature of mpv.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Available options are:
speed=<value>
Set CD spin speed.
paranoia=<0-2>
Set paranoia level. Values other than 0 seem to break playback of
anything but the first track.
:0: disable checking (default)
:1: overlap checking only
:2: full data correction and verification
generic-dev=<value>
Use specified generic SCSI device.
sector-size=<value>
Set atomic read size.
overlap=<value>
Force minimum overlap search during verification to <value> sectors.
toc-bias
Assume that the beginning offset of track 1 as reported in the TOC
will be addressed as LBA 0. Some Toshiba drives need this for getting
track boundaries correct.
toc-offset=<value>
Add <value> sectors to the values reported when addressing tracks. May
be negative.
manpage: cleanup Removing text about things that have been removed from the code long ago, other fixes.
2012-10-24 01:06:00 +02:00
(no-)skip
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
(Never) accept imperfect data reconstruction.
--cdrom-device=<path>
Specify the CD-ROM device (default: ``/dev/cdrom``).
--channels=<number>
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
Request the number of playback channels (default: 2). mpv asks the
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
decoder to decode the audio into as many channels as specified. Then it is
up to the decoder to fulfill the requirement. This is usually only
important when playing videos with AC-3 audio (like DVDs). In that case
liba52 does the decoding by default and correctly downmixes the audio into
the requested number of channels. To directly control the number of output
channels independently of how many channels are decoded, use the channels
filter (``--af=channels``).
*NOTE*: This option is honored by codecs (AC-3 only), filters (surround)
and audio output drivers (OSS at least).
Available options are:
:2: stereo
:4: surround
:6: full 5.1
:8: full 7.1
--chapter=<start[-end]>
Specify which chapter to start playing at. Optionally specify which
options: rename -ss and -endpos, allow relative times Rename the -ss option to -start, and -endpos to -length. Add a -end option. The -end option always specifies an absolute end time, as opposed to -endpos/-length. All these options (--start, --end, --length) now accept relative times. Percent positions (e.g. "--start=30%") are interpreted as fractions of the file duration. Negative times (e.g. "--start=-1:00) are interpreted relative to the end of the file. Chapters (e.g. "--start=#3") yield the chapter's time position. The chapter support might be able to replace --chapter completely, but for now I am not sure how well this works out with e.g. DVDs and BDs, and a separate --chapter option is useful interface-wise.
2012-11-15 18:49:17 +01:00
chapter to end playing at. Also see ``--start``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--chapter-merge-threshold=<number>
Threshold for merging almost consecutive ordered chapter parts in
milliseconds (default: 100). Some Matroska files with ordered chapters
have inaccurate chapter end timestamps, causing a small gap between the
end of one chapter and the start of the next one when they should match.
If the end of one playback part is less than the given threshold away from
the start of the next one then keep playing video normally over the
chapter change instead of doing a seek.
--colormatrix=<colorspace>
Controls the YUV to RGB color space conversion when playing video. There
are various standards. Normally, BT.601 should be used for SD video, and
BT.709 for HD video. (This is done by default.) Using incorrect color space
results in slightly under or over saturated and shifted colors.
The color space conversion is additionally influenced by the related
options --colormatrix-input-range and --colormatrix-output-range.
These options are not always supported. Different video outputs provide
manpage: various fixes
2012-11-15 14:25:20 +01:00
varying degrees of support. The opengl and vdpau video output drivers usually
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
offer full support. The xv output can set the color space if the system
video driver supports it, but not input and output levels. The scale video
filter can configure color space and input levels, but only if the output
format is RGB (if the video output driver supports RGB output, you can
force this with ``-vf scale,format=rgba``).
manpage: mention that videos' colormatrix and color range flags are honored
2012-08-22 17:08:26 +02:00
If this option is set to ``auto`` (which is the default), the video's
color space flag will be used. If that flag is unset, the color space
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
will be selected automatically. This is done using a simple heuristic that
attempts to distinguish SD and HD video. If the video is larger than
1279x576 pixels, BT.709 (HD) will be used; otherwise BT.601 (SD) is
selected.
Available color spaces are:
:auto: automatic selection (default)
:BT.601: ITU-R BT.601 (SD)
:BT.709: ITU-R BT.709 (HD)
:SMPTE-240M: SMPTE-240M
--colormatrix-input-range=<color-range>
YUV color levels used with YUV to RGB conversion. This option is only
necessary when playing broken files, which don't follow standard color
manpage: mention that videos' colormatrix and color range flags are honored
2012-08-22 17:08:26 +02:00
levels or which are flagged wrong. If the video doesn't specify its
color range, it is assumed to be limited range.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
The same limitations as with --colormatrix apply.
Available color ranges are:
:auto: automatic selection (normally limited range) (default)
:limited: limited range (16-235 for luma, 16-240 for chroma)
manpage: correct the definition of full range video
2012-08-20 15:53:04 +02:00
:full: full range (0-255 for both luma and chroma)
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--colormatrix-output-range=<color-range>
RGB color levels used with YUV to RGB conversion. Normally, output devices
such as PC monitors use full range color levels. However, some TVs and
video monitors expect studio level RGB. Providing full range output to a
device expecting studio level input results in crushed blacks and whites,
the reverse in dim grey blacks and dim whites.
The same limitations as with --colormatrix apply.
Available color ranges are:
:auto: automatic selection (equals to full range) (default)
:limited: limited range (16-235 per component), studio levels
:full: full range (0-255 per component), PC levels
--colorkey=<number>
Changes the colorkey to an RGB value of your choice. 0x000000 is black and
manpage: don't mention nonexistent VOs, command line switches, etc. Very likely doesn't remove all outdated things.
2012-08-22 15:47:02 +02:00
0xffffff is white. Only supported by the xv (see ``--vo=xv:ck``) video
output driver. See also ``--no-colorkey``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--consolecontrols, --no-consolecontrols
``--no-consolecontrols`` prevents the player from reading key events from
standard input. Useful when reading data from standard input. This is
automatically enabled when ``-`` is found on the command line. There are
situations where you have to set it manually, e.g. if you open
``/dev/stdin`` (or the equivalent on your system), use stdin in a playlist
or intend to read from stdin later on via the loadfile or loadlist slave
commands.
--contrast=<-100-100>
Adjust the contrast of the video signal (default: 0). Not supported by all
video output drivers.
--cookies, --no-cookies
(network only)
Support cookies when making HTTP requests. Disabled by default.
--cookies-file=<filename>
(network only)
cookies: don't read cookie files from ancient browsers Remove the code that attempted to read cookie files from well-known browser locations. This code was written for ancient browsers, and only knew about Mozilla and Netscape. While it's possible that these browsers are still alive and still use the same config locations and cookie file formats, the only Mozilla-based browser that still matters is Firefox. Firefox uses a sqlite database for cookies, located in a slightly different config path. Just remove this code.
2012-11-15 17:53:12 +01:00
Read HTTP cookies from <filename>. The file is
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
assumed to be in Netscape format.
--correct-pts, --no-correct-pts
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
Switches mpv to a mode where timestamps for video frames are
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
calculated differently and video filters which add new frames or modify
timestamps of existing ones are supported. Now enabled automatically for
most common file formats. The more accurate timestamps can be visible for
example when playing subtitles timed to scene changes with the ``--ass``
option. Without ``--correct-pts`` the subtitle timing will typically be
off by some frames. This option does not work correctly with some demuxers
and codecs.
options: rename --cursor-autohide, replace magic number values --cursor-autohide-delay=-2 becomes --cursor-autohide=always --cursor-autohide-delay=-1 becomes --cursor-autohide=no --cursor-autohide-delay=123 becomes --cursor-autohide=123
2012-11-15 18:59:41 +01:00
--cursor-autohide=<number|no|always>
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Make mouse cursor automatically hide after given number of milliseconds.
options: rename --cursor-autohide, replace magic number values --cursor-autohide-delay=-2 becomes --cursor-autohide=always --cursor-autohide-delay=-1 becomes --cursor-autohide=no --cursor-autohide-delay=123 becomes --cursor-autohide=123
2012-11-15 18:59:41 +01:00
``no`` will disable cursor autohide. ``always`` means the cursor
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
will stay hidden. Supported by video output drivers which use X11 or
OS X Cocoa.
commands: add more property-option bridge uses, rename some options Make more properties use the property-to-option bridge to reduce code size and to enforce consistency. Some options are renamed to the same as the properties (the property names are better in all cases). Do some other minor cleanups. One bigger issue was memory management of strings: M_PROPERTY_TO_STRING assumed the strings were statically allocated, and no dynamic allocations could be returned. Fix this in case the need for such properties arises in the future. Get rid of m_property_string_ro(), because it's not always clear that the "action" parameter is M_PROPERTY_SET and the string argument will be used.
2012-09-18 20:07:24 +02:00
--audio-delay=<sec>
manpage: fix various typos
2012-08-22 15:45:34 +02:00
audio delay in seconds (positive or negative float value). Negative values
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
delay the audio, and positive values delay the video.
--demuxer=<[+]name>
Force demuxer type. Use a '+' before the name to force it, this will skip
some checks! Give the demuxer name as printed by ``--demuxer=help``.
manpage: various fixes
2012-11-15 14:25:20 +01:00
--doubleclick-time=<milliseconds>
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Time in milliseconds to recognize two consecutive button presses as a
manpage: don't mention nonexistent VOs, command line switches, etc. Very likely doesn't remove all outdated things.
2012-08-22 15:47:02 +02:00
double-click (default: 300).
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Add a --dtshd option The spdif decoder was hardcoded to assume that the spdif output is capable of accepting high (>1.5Mbps) bitrates. While this is true for modern HDMI spdif interfaces, the original coax/toslink system cannot deal with this and will fail to work. This patch adds an option --dtshd which can be enabled if you use a DTS-capable receiver behind a HDMI link.
2013-03-03 18:48:20 +01:00
--dtshd, --no-dtshd
When using DTS passthrough, output any DTS-HD track as-is.
manpage: fix --no-dts typo
2013-03-04 22:20:54 +01:00
With ``--no-dtshd`` (the default) only the DTS Core parts will be output.
Add a --dtshd option The spdif decoder was hardcoded to assume that the spdif output is capable of accepting high (>1.5Mbps) bitrates. While this is true for modern HDMI spdif interfaces, the original coax/toslink system cannot deal with this and will fail to work. This patch adds an option --dtshd which can be enabled if you use a DTS-capable receiver behind a HDMI link.
2013-03-03 18:48:20 +01:00
DTS-HD tracks can be sent over HDMI but not over the original
coax/toslink S/PDIF system.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--dvbin=<options>
Pass the following parameters to the DVB input module, in order to
override the default ones:
:card=<1-4>: Specifies using card number 1-4 (default: 1).
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
:file=<filename>: Instructs mpv to read the channels list from
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
<filename>. Default is
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
``~/.mpv/channels.conf.{sat,ter,cbl,atsc}`` (based
on your card type) or ``~/.mpv/channels.conf`` as a
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
last resort.
:timeout=<1-30>: Maximum number of seconds to wait when trying to tune a
frequency before giving up (default: 30).
--dvd-device=<path>
Specify the DVD device or .iso filename (default: ``/dev/dvd``). You can
also specify a directory that contains files previously copied directly
from a DVD (with e.g. vobcopy).
--dvd-speed=<speed>
Try to limit DVD speed (default: 0, no change). DVD base speed is 1385
kB/s, so a 8x drive can read at speeds up to 11080 kB/s. Slower speeds
make the drive more quiet. For watching DVDs 2700 kB/s should be quiet and
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
fast enough. mpv resets the speed to the drive default value on close.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Values of at least 100 mean speed in kB/s. Values less than 100 mean
multiples of 1385 kB/s, i.e. ``--dvd-speed=8`` selects 11080 kB/s.
*NOTE*: You need write access to the DVD device to change the speed.
--dvdangle=<ID>
Some DVD discs contain scenes that can be viewed from multiple angles.
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
Here you can tell mpv which angles to use (default: 1).
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--edition=<ID>
(Matroska files only)
Specify the edition (set of chapters) to use, where 0 is the first. If set
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
to -1 (the default), mpv will choose the first edition declared as a
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
default, or if there is no default, the first edition defined.
--embeddedfonts, --no-embeddedfonts
Use fonts embedded in Matroska container files and ASS scripts (default:
enabled). These fonts can be used for SSA/ASS subtitle rendering
(``--ass`` option).
manpage: minor improvements
2012-12-21 20:36:08 +01:00
--end=<time>
Stop at given absolute time. Use ``--length`` if the time should be relative
to ``--start``. See ``--start`` for valid option values and examples.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
manpage: various fixes
2012-11-15 14:25:20 +01:00
--no-extbased, --extbased
``--no-extbased`` disables extension-based demuxer selection. By default, when the file type
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
(demuxer) cannot be detected reliably (the file has no header or it is not
reliable enough), the filename extension is used to select the demuxer.
Always falls back on content-based demuxer selection.
options: --field-dominance: replace magic number values with choices --field-dominance=-1 becomes --field-dominance=auto --field-dominance=0 becomes --field-dominance=top --field-dominance=1 becomes --field-dominance=bottom
2012-11-15 18:53:51 +01:00
--field-dominance=<auto|top|bottom>
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Set first field for interlaced content. Useful for deinterlacers that
options: --field-dominance: replace magic number values with choices --field-dominance=-1 becomes --field-dominance=auto --field-dominance=0 becomes --field-dominance=top --field-dominance=1 becomes --field-dominance=bottom
2012-11-15 18:53:51 +01:00
double the framerate: ``--vf=yadif=1`` and ``--vo=vdpau:deint``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
options: --field-dominance: replace magic number values with choices --field-dominance=-1 becomes --field-dominance=auto --field-dominance=0 becomes --field-dominance=top --field-dominance=1 becomes --field-dominance=bottom
2012-11-15 18:53:51 +01:00
:auto: (default) If the decoder does not export the appropriate
manpage: minor improvements
2012-12-21 20:36:08 +01:00
information, it falls back to ``top`` (top field first).
options: --field-dominance: replace magic number values with choices --field-dominance=-1 becomes --field-dominance=auto --field-dominance=0 becomes --field-dominance=top --field-dominance=1 becomes --field-dominance=bottom
2012-11-15 18:53:51 +01:00
:top: top field first
:bottom: bottom field first
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
manpage: various fixes
2012-11-15 14:25:20 +01:00
--no-fixed-vo, --fixed-vo
``--no-fixed-vo`` enforces closing and reopening the video window for
multiple files (one (un)initialization for all files).
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--flip
Flip image upside-down.
sub: add experimental --force-rgba-osd-rendering switch
2012-12-28 17:17:16 +01:00
--force-rgba-osd-rendering
Change how some video outputs render the OSD and text subtitles. This
does not change appearance of the subtitles and only has performance
implications. For VOs which support native ASS rendering (like ``vdpau``,
``opengl``, ``direct3d``), this can be slightly faster or slower,
depending on GPU drivers and hardware. For other VOs, this just makes
rendering slower.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--force-window-position
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
Forcefully move mpv's video output window to default location whenever
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
there is a change in video parameters, video stream or file. This used to
be the default behavior. Currently only affects X11 VOs.
commands: add more property-option bridge uses, rename some options Make more properties use the property-to-option bridge to reduce code size and to enforce consistency. Some options are renamed to the same as the properties (the property names are better in all cases). Do some other minor cleanups. One bigger issue was memory management of strings: M_PROPERTY_TO_STRING assumed the strings were statically allocated, and no dynamic allocations could be returned. Fix this in case the need for such properties arises in the future. Get rid of m_property_string_ro(), because it's not always clear that the "action" parameter is M_PROPERTY_SET and the string argument will be used.
2012-09-18 20:07:24 +02:00
--sub-forced-only
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Display only forced subtitles for the DVD subtitle stream selected by e.g.
``--slang``.
--forceidx
Force index rebuilding. Useful for files with broken index (A/V desync,
etc). This will enable seeking in files where seeking was not possible.
*NOTE*: This option only works if the underlying media supports seeking
(i.e. not with stdin, pipe, etc).
--format=<format>
Select the sample format used for output from the audio filter layer to
the sound card. The values that <format> can adopt are listed below in the
description of the ``format`` audio filter.
--fps=<float>
Override video framerate. Useful if the original value is wrong or missing.
manpage: cleanup Removing text about things that have been removed from the code long ago, other fixes.
2012-10-24 01:06:00 +02:00
*NOTE*: Works in ``--no-correct-pts`` mode only.
commands: replace --hardframedrop, change framedropping property Replace --hardframedrop with --framedrop=hard. Rename the framedrop property from "framedropping" to "framedrop" for the sake of making command line options have the same name as their corresponding property. Change the property to accept choice values instead of numeric values. Remove unused/forgotten auto_quality variable.
2012-09-17 08:38:19 +02:00
--framedrop=<no|yes|hard>
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Skip displaying some frames to maintain A/V sync on slow systems. Video
filters are not applied to such frames. For B-frames even decoding is
commands: replace --hardframedrop, change framedropping property Replace --hardframedrop with --framedrop=hard. Rename the framedrop property from "framedropping" to "framedrop" for the sake of making command line options have the same name as their corresponding property. Change the property to accept choice values instead of numeric values. Remove unused/forgotten auto_quality variable.
2012-09-17 08:38:19 +02:00
skipped completely. May produce unwatchably choppy output. With ``hard``,
decoding and output of any frame can be skipped, and will lead to an even
worse playback experience.
manpage: cleanup Removing text about things that have been removed from the code long ago, other fixes.
2012-10-24 01:06:00 +02:00
*NOTE*: Practical use of this feature is questionable. Disabled by default.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--frames=<number>
mplayer: make --frames=1 work for audio This has the same (useless) definition as frame stepping in audio-only mode: one frame means one playloop iteration. (It's relatively useless, because one playloop iteration has a random duration. But it makes --frames=1 work, which is useful again.)
2013-03-25 22:57:24 +01:00
Play/convert only first <number> video frames, then quit. For audio only,
run <number> iteration of the playback loop, which is most likely not what
you want. (This behavior also applies to the corner case when there are
less video frames than <number>, and audio is longer than the video.)
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
manpage: various fixes
2012-11-15 14:25:20 +01:00
--fullscreen, --fs
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Fullscreen playback (centers movie, and paints black bands around it).
core: add fs-screen option for fullscreen display selection `--fs-screen` allows to decide what display to go fullscreen into. The semantics of `--screen` changed and now it is only used to select the windowed display when starting the application. This is useful for people using mpv with an external TV. They will start windowed on their laptop's screen and switch to fullscreen on the TV. @wm4 worked on the x11 and w32 parts of the code. All is squashed in one commit for history clarity.
2013-02-17 16:35:44 +01:00
--fs-screen=<all|current|0-32>
In multi-monitor configurations (i.e. a single desktop that spans across
multiple displays) this option tells mpv which screen to go fullscreen to.
If ``default`` is provided mpv will fallback to using the behaviour
depending on what the user provided with the ``screen`` option.
*NOTE (X11)*: this option does not work properly with all window managers.
``all`` in particular will usually only work with ``--fstype=-fullscreen``
or ``--fstype=none``, and even then only with some window managers.
*NOTE (OSX)*: ``all`` doesn't work on OSX and will behave like ``current``.
See also ``--screen``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--fsmode-dontuse=<0-31>
OBSOLETE, use the ``--fs`` option.
Try this option if you still experience fullscreen problems.
--fstype=<type1,type2,...>
(X11 only)
Specify a priority list of fullscreen modes to be used. You can negate the
modes by prefixing them with '-'. If you experience problems like the
fullscreen window being covered by other windows try using a different
order.
*NOTE*: See ``--fstype=help`` for a full list of available modes.
The available types are:
above
Use the ``_NETWM_STATE_ABOVE`` hint if available.
below
Use the ``_NETWM_STATE_BELOW`` hint if available.
fullscreen
Use the ``_NETWM_STATE_FULLSCREEN`` hint if available.
layer
Use the ``_WIN_LAYER`` hint with the default layer.
layer=<0...15>
Use the ``_WIN_LAYER`` hint with the given layer number.
netwm
Force NETWM style.
none
Clear the list of modes; you can add modes to enable afterward.
stays_on_top
Use ``_NETWM_STATE_STAYS_ON_TOP`` hint if available.
*EXAMPLE*:
``--fstype=layer,stays_on_top,above,fullscreen``
Default order, will be used as a fallback if incorrect or
unsupported modes are specified.
``--fstype=fullscreen``
Fixes fullscreen switching on OpenBox 1.x.
--gamma=<-100-100>
Adjust the gamma of the video signal (default: 0). Not supported by all
video output drivers.
--gapless-audio
Try to play consecutive audio files with no silence or disruption at the
point of file change. This feature is implemented in a simple manner and
relies on audio output device buffering to continue playback while moving
from one file to another. If playback of the new file starts slowly, for
example because it's played from a remote network location or because you
have specified cache settings that require time for the initial cache
fill, then the buffered audio may run out before playback of the new file
can start.
*NOTE*: The audio device is opened using parameters chosen according to
the first file played and is then kept open for gapless playback. This
means that if the first file for example has a low samplerate then the
following files may get resampled to the same low samplerate, resulting in
reduced sound quality. If you play files with different parameters,
consider using options such as ``--srate`` and ``--format`` to explicitly
select what the shared output format will be.
options: allow using % for width and height in --geometry Now all numbers in the --geometry specification can take percentages. Rewrite the parsing of --geometry, because adjusting the sscanf() mess would require adding all the combinations of using and not using %. As a side effect, using % and pixel values can be freely mixed. Keep the aspect if only one of width or height is set. This is more useful in general. Note: there is one semantic change: --geometry=num used to mean setting the window X position, but now it means setting the window width. Apparently this was a mplayer-specific feature (not part of standard X geometry specifications), and it doesn't look like an overly useful feature, so we are fine with breaking it. In general, the new parsing should still adhere to standard X geometry specification (as used by XParseGeometry()).
2013-01-23 10:56:27 +01:00
--geometry=<[W[xH]][+-x+-y]>, --geometry=<x:y>
Adjust the initial window position or size. W and H set the window size in
pixels. x and y set the window position, measured in pixels from the
top-left of the screen to the top-left of the image being displayed. If a
percentage sign (``%``) is given after the argument it turns the value into
a percentage of the screen size in that direction. Positions are specified
similar to the standard X11 ``--geometry`` option format, in which e.g.
+10-50 means "place 10 pixels from the left border and 50 pixels from the
lower border" and "--20+-10" means "place 20 pixels beyond the right and
10 pixels beyond the top border".
x11_common: always create a window, even with --wid The --wid switch (for embedding the player into other applications) didn't create a new window, and instead tried to use the window that was passed via --wid directly. This made the code more complex, caused strange X errors (mpv and host application fighting for exclusive X resources), and actually could cause issues if the --wid window wasn't created with the X Visual needed for OpenGL. Always create a window instead. This makes it always possible to embed the player into foreign windows. --geometry doesn't work anymore - the controlling application should always create a new window to place the player inside it, and can control the video window by moving and resizing this window. w32_common.c actually did this right, and always creates a new window.
2013-02-24 23:35:13 +01:00
If an external window is specified using the ``--wid`` option, this
option is ignored.
The coordinates are relative to the screen given with ``--screen`` for the
video output drivers that fully support ``--screen``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
options: allow using % for width and height in --geometry Now all numbers in the --geometry specification can take percentages. Rewrite the parsing of --geometry, because adjusting the sscanf() mess would require adding all the combinations of using and not using %. As a side effect, using % and pixel values can be freely mixed. Keep the aspect if only one of width or height is set. This is more useful in general. Note: there is one semantic change: --geometry=num used to mean setting the window X position, but now it means setting the window width. Apparently this was a mplayer-specific feature (not part of standard X geometry specifications), and it doesn't look like an overly useful feature, so we are fine with breaking it. In general, the new parsing should still adhere to standard X geometry specification (as used by XParseGeometry()).
2013-01-23 10:56:27 +01:00
*NOTE*: Generally only supported by GUI VOs. Ignored for encoding.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
cocoa_common: honor the `--geometry` option
2012-11-10 20:19:21 +01:00
*NOTE (OSX)*: On Mac OSX the origin of the screen coordinate system is
located on the the bottom-left corner. For instance, ``0:0`` will place the
window at the bottom-left of the screen.
core: add fs-screen option for fullscreen display selection `--fs-screen` allows to decide what display to go fullscreen into. The semantics of `--screen` changed and now it is only used to select the windowed display when starting the application. This is useful for people using mpv with an external TV. They will start windowed on their laptop's screen and switch to fullscreen on the TV. @wm4 worked on the x11 and w32 parts of the code. All is squashed in one commit for history clarity.
2013-02-17 16:35:44 +01:00
*NOTE (X11)*: this option does not work properly with all window managers.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
*EXAMPLE*:
``50:40``
Places the window at x=50, y=40.
``50%:50%``
Places the window in the middle of the screen.
``100%:100%``
Places the window at the bottom right corner of the screen.
options: allow using % for width and height in --geometry Now all numbers in the --geometry specification can take percentages. Rewrite the parsing of --geometry, because adjusting the sscanf() mess would require adding all the combinations of using and not using %. As a side effect, using % and pixel values can be freely mixed. Keep the aspect if only one of width or height is set. This is more useful in general. Note: there is one semantic change: --geometry=num used to mean setting the window X position, but now it means setting the window width. Apparently this was a mplayer-specific feature (not part of standard X geometry specifications), and it doesn't look like an overly useful feature, so we are fine with breaking it. In general, the new parsing should still adhere to standard X geometry specification (as used by XParseGeometry()).
2013-01-23 10:56:27 +01:00
``50%``
Sets the window width to half the screen width. Window height is set so
that the window has the video aspect ratio.
``50%x50%``
Forces the window width and height to half the screen width and height.
Will show black borders to compensate for the video aspect ration (with
most VOs and without ``--no-keepaspect``).
``50%+10+10``
Sets the window to half the screen widths, and positions it 10 pixels
below/left of the top left corner of the screen.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
video: add --autofit and --autofit-larger options --autofit=WxH sets the window size to a maximum width and/or height, without changing the window's aspect ratio. --autofit-larger=WxH does the same, but only if the video size is actually larger than the window size that would result when using the --autofit=WxH option with the same arguments.
2013-01-23 10:56:36 +01:00
See also ``--autofit`` and ``--autofit-larger`` for fitting the window into
a given size without changing aspect ratio.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--grabpointer, --no-grabpointer
manpage: fix various typos
2012-08-22 15:45:34 +02:00
``--no-grabpointer`` tells the player to not grab the mouse pointer after a
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
video mode change (``--vm``). Useful for multihead setups.
--heartbeat-cmd
Command that is executed every 30 seconds during playback via *system()* -
core: add --heartbeat-interval option This closely follows MPlayer commit 36099, with some changes. Move a mutable static variable into MPContext.
2013-04-04 14:24:42 +02:00
i.e. using the shell. The time between the commands can be customized with
the ``--heartbeat-interval`` option.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
manpage: cleanup Removing text about things that have been removed from the code long ago, other fixes.
2012-10-24 01:06:00 +02:00
*NOTE*: mpv uses this command without any checking. It is your
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
responsibility to ensure it does not cause security problems (e.g. make
sure to use full paths if "." is in your path like on Windows). It also
man: remove documentation for deleted stuff Also make some minor cosmetic changes.
2012-08-02 19:31:33 +02:00
only works when playing video (i.e. not with ``--no-video`` but works with
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
``-vo=null``).
This can be "misused" to disable screensavers that do not support the
proper X API (see also ``--stop-xscreensaver``). If you think this is too
complicated, ask the author of the screensaver program to support the
proper X APIs.
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
*EXAMPLE for xscreensaver*: ``mpv --heartbeat-cmd="xscreensaver-command
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
-deactivate" file``
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
*EXAMPLE for GNOME screensaver*: ``mpv
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--heartbeat-cmd="gnome-screensaver-command -p" file``
core: add --heartbeat-interval option This closely follows MPlayer commit 36099, with some changes. Move a mutable static variable into MPContext.
2013-04-04 14:24:42 +02:00
--heartbeat-interval=<sec>
Time between ``--heartbeat-cmd`` invocations in seconds (default: 30).
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--help
manpage: cleanup Removing text about things that have been removed from the code long ago, other fixes.
2012-10-24 01:06:00 +02:00
Show short summary of options.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
options: accept "yes" and "no" only for flags This removes the alternative values like "off", "0", "false" etc., and also the non-English versions of these. This is done for general consistency. It's better to have a single way of doing things when multiple ways don't add singificant value. Also update some choices for consistency.
2012-09-18 15:50:24 +02:00
--hr-seek=<no|absolute|yes>
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Select when to use precise seeks that are not limited to keyframes. Such
seeks require decoding video from the previous keyframe up to the target
position and so can take some time depending on decoding performance. For
some video formats precise seeks are disabled. This option selects the
default choice to use for seeks; it's possible to explicitly override that
default in the definition of key bindings and in slave mode commands.
options: accept "yes" and "no" only for flags This removes the alternative values like "off", "0", "false" etc., and also the non-English versions of these. This is done for general consistency. It's better to have a single way of doing things when multiple ways don't add singificant value. Also update some choices for consistency.
2012-09-18 15:50:24 +02:00
:no: Never use precise seeks.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
:absolute: Use precise seeks if the seek is to an absolute position in the
file, such as a chapter seek, but not for relative seeks like
the default behavior of arrow keys (default).
options: accept "yes" and "no" only for flags This removes the alternative values like "off", "0", "false" etc., and also the non-English versions of these. This is done for general consistency. It's better to have a single way of doing things when multiple ways don't add singificant value. Also update some choices for consistency.
2012-09-18 15:50:24 +02:00
:yes: Use precise seeks whenever possible.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--hr-seek-demuxer-offset=<seconds>
This option exists to work around failures to do precise seeks (as in
``--hr-seek``) caused by bugs or limitations in the demuxers for some file
formats. Some demuxers fail to seek to a keyframe before the given target
position, going to a later position instead. The value of this option is
subtracted from the time stamp given to the demuxer. Thus if you set this
option to 1.5 and try to do a precise seek to 60 seconds, the demuxer is
told to seek to time 58.5, which hopefully reduces the chance that it
erroneously goes to some time later than 60 seconds. The downside of
setting this option is that precise seeks become slower, as video between
the earlier demuxer position and the real target may be unnecessarily
decoded.
--http-header-fields=<field1,field2>
Set custom HTTP fields when accessing HTTP stream.
*EXAMPLE*:
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
``mpv --http-header-fields='Field1: value1','Field2: value2' http://localhost:1234``
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Will generate HTTP request:
| GET / HTTP/1.0
| Host: localhost:1234
| User-Agent: MPlayer
| Icy-MetaData: 1
| Field1: value1
| Field2: value2
| Connection: close
--hue=<-100-100>
Adjust the hue of the video signal (default: 0). You can get a colored
negative of the image with this option. Not supported by all video output
drivers.
video: different way to enable hardware decoding, add software fallback Deprecate the hardware specific video codec entries (like ffh264vdpau). Replace them with the --hwdec switch, which requests that a specific hardware decoding API should be used. The codecs.conf entries will be removed at a later time, but for now they are useful for testing and compatibility. Instead of --vc=ffh264vdpau, --hwdec=vdpau should be used. Add a fallback if hardware decoding fails. Most hardware decoders (including vdpau) support only a subset of h264, and having such a fallback is supposed to enable a better user experience.
2012-12-11 18:16:42 +01:00
--hwdec=<api>
Specify the hardware video decoding API that should be used if possible.
Whether hardware decoding is actually done depends on the video codec. If
hardware decoding is not possible, mpv will fall back to software decoding.
<api> can be one of the following:
:no: always use software decoding (default)
:vdpau: works with nvidia drivers only, requires ``--vo=vdpau``
:vda: OSX
:crystalhd: Broadcom Crystal HD
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--identify
manpage: cleanup Removing text about things that have been removed from the code long ago, other fixes.
2012-10-24 01:06:00 +02:00
Deprecated. Use ``TOOLS/mpv_identify.sh``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--idle
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
Makes mpv wait idly instead of quitting when there is no file to play.
Mostly useful in slave mode where mpv can be controlled through input
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
commands (see also ``--slave``).
--idx
Rebuilds index of files if no index was found, allowing seeking. Useful
with broken/incomplete downloads, or badly created files. Now this is done
automatically by the demuxers used for most video formats, meaning that
this switch has no effect in the typical case. See also ``--forceidx``.
*NOTE*: This option only works if the underlying media supports seeking
(i.e. not with stdin, pipe, etc).
--ignore-start
manpage: various fixes
2012-11-15 14:25:20 +01:00
Matters with the builtin AVI demuxer only, which is not enabled by default.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Ignore the specified starting time for streams in AVI files. This
nullifies stream delays.
--include=<configuration-file>
Specify configuration file to be parsed after the default ones.
--initial-audio-sync, --no-initial-audio-sync
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
When starting a video file or after events such as seeking mpv will by
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
default modify the audio stream to make it start from the same timestamp
as video, by either inserting silence at the start or cutting away the
first samples. Disabling this option makes the player behave like older
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
mpv versions did: video and audio are both started immediately even if
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
their start timestamps differ, and then video timing is gradually adjusted
if necessary to reach correct synchronization later.
options: drop --opt:subopt option names For all suboptions, "flat" options were available by separating the parent option and the sub option with ":", e.g. "--rawvideo:w=123". Drop this syntax and use "-" as separator. This means even suboptions are available as normal options now, e.g. "--rawvideo-w=123". The old syntax doesn't work anymore. Note that this is completely separate from actual suboptions. For example, "-rawvideo w=123:h=123" still works. (Not that this syntax is worth supporting, but it's needed anyway, for for other things like vf and vo suboptions.) As a consequence of this change, we also have to add new "no-" prefixed options for flag suboptions, so that "--no-input-default-bindings" works. ("--input-no-default-bindings" also works as a consequence of allowing "-input no-default-bindings" - they are handled by the same underlying option.) For --input, always use the full syntax in the manpage. There exist suboptions other than --input (like --tv, --rawvideo, etc.), but since they might be handled differently in the future, don't touch these yet. M_OPT_PREFIXED becomes the default, so remove it. As a minor unrelated cleanup, get rid of M_OPT_MERGE too and use the OPT_SUBSTRUCT() macro in some places. Unrelated: remove the duplicated --tv:buffersize option, fix a typo in changes.rst.
2013-02-21 22:10:21 +01:00
--input-conf=<filename>
Specify input configuration file other than the default
``~/.mpv/input.conf``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
options: drop --opt:subopt option names For all suboptions, "flat" options were available by separating the parent option and the sub option with ":", e.g. "--rawvideo:w=123". Drop this syntax and use "-" as separator. This means even suboptions are available as normal options now, e.g. "--rawvideo-w=123". The old syntax doesn't work anymore. Note that this is completely separate from actual suboptions. For example, "-rawvideo w=123:h=123" still works. (Not that this syntax is worth supporting, but it's needed anyway, for for other things like vf and vo suboptions.) As a consequence of this change, we also have to add new "no-" prefixed options for flag suboptions, so that "--no-input-default-bindings" works. ("--input-no-default-bindings" also works as a consequence of allowing "-input no-default-bindings" - they are handled by the same underlying option.) For --input, always use the full syntax in the manpage. There exist suboptions other than --input (like --tv, --rawvideo, etc.), but since they might be handled differently in the future, don't touch these yet. M_OPT_PREFIXED becomes the default, so remove it. As a minor unrelated cleanup, get rid of M_OPT_MERGE too and use the OPT_SUBSTRUCT() macro in some places. Unrelated: remove the duplicated --tv:buffersize option, fix a typo in changes.rst.
2013-02-21 22:10:21 +01:00
--input-ar-dev=<device>
Device to be used for Apple IR Remote (default is autodetected, Linux
only).
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
options: drop --opt:subopt option names For all suboptions, "flat" options were available by separating the parent option and the sub option with ":", e.g. "--rawvideo:w=123". Drop this syntax and use "-" as separator. This means even suboptions are available as normal options now, e.g. "--rawvideo-w=123". The old syntax doesn't work anymore. Note that this is completely separate from actual suboptions. For example, "-rawvideo w=123:h=123" still works. (Not that this syntax is worth supporting, but it's needed anyway, for for other things like vf and vo suboptions.) As a consequence of this change, we also have to add new "no-" prefixed options for flag suboptions, so that "--no-input-default-bindings" works. ("--input-no-default-bindings" also works as a consequence of allowing "-input no-default-bindings" - they are handled by the same underlying option.) For --input, always use the full syntax in the manpage. There exist suboptions other than --input (like --tv, --rawvideo, etc.), but since they might be handled differently in the future, don't touch these yet. M_OPT_PREFIXED becomes the default, so remove it. As a minor unrelated cleanup, get rid of M_OPT_MERGE too and use the OPT_SUBSTRUCT() macro in some places. Unrelated: remove the duplicated --tv:buffersize option, fix a typo in changes.rst.
2013-02-21 22:10:21 +01:00
--input-ar-delay
Delay in milliseconds before we start to autorepeat a key (0 to
disable).
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
options: drop --opt:subopt option names For all suboptions, "flat" options were available by separating the parent option and the sub option with ":", e.g. "--rawvideo:w=123". Drop this syntax and use "-" as separator. This means even suboptions are available as normal options now, e.g. "--rawvideo-w=123". The old syntax doesn't work anymore. Note that this is completely separate from actual suboptions. For example, "-rawvideo w=123:h=123" still works. (Not that this syntax is worth supporting, but it's needed anyway, for for other things like vf and vo suboptions.) As a consequence of this change, we also have to add new "no-" prefixed options for flag suboptions, so that "--no-input-default-bindings" works. ("--input-no-default-bindings" also works as a consequence of allowing "-input no-default-bindings" - they are handled by the same underlying option.) For --input, always use the full syntax in the manpage. There exist suboptions other than --input (like --tv, --rawvideo, etc.), but since they might be handled differently in the future, don't touch these yet. M_OPT_PREFIXED becomes the default, so remove it. As a minor unrelated cleanup, get rid of M_OPT_MERGE too and use the OPT_SUBSTRUCT() macro in some places. Unrelated: remove the duplicated --tv:buffersize option, fix a typo in changes.rst.
2013-02-21 22:10:21 +01:00
--input-ar-rate
Number of key presses to generate per second on autorepeat.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
options: drop --opt:subopt option names For all suboptions, "flat" options were available by separating the parent option and the sub option with ":", e.g. "--rawvideo:w=123". Drop this syntax and use "-" as separator. This means even suboptions are available as normal options now, e.g. "--rawvideo-w=123". The old syntax doesn't work anymore. Note that this is completely separate from actual suboptions. For example, "-rawvideo w=123:h=123" still works. (Not that this syntax is worth supporting, but it's needed anyway, for for other things like vf and vo suboptions.) As a consequence of this change, we also have to add new "no-" prefixed options for flag suboptions, so that "--no-input-default-bindings" works. ("--input-no-default-bindings" also works as a consequence of allowing "-input no-default-bindings" - they are handled by the same underlying option.) For --input, always use the full syntax in the manpage. There exist suboptions other than --input (like --tv, --rawvideo, etc.), but since they might be handled differently in the future, don't touch these yet. M_OPT_PREFIXED becomes the default, so remove it. As a minor unrelated cleanup, get rid of M_OPT_MERGE too and use the OPT_SUBSTRUCT() macro in some places. Unrelated: remove the duplicated --tv:buffersize option, fix a typo in changes.rst.
2013-02-21 22:10:21 +01:00
--no-input-default-bindings
Use the key bindings that mpv ships with by default.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
options: drop --opt:subopt option names For all suboptions, "flat" options were available by separating the parent option and the sub option with ":", e.g. "--rawvideo:w=123". Drop this syntax and use "-" as separator. This means even suboptions are available as normal options now, e.g. "--rawvideo-w=123". The old syntax doesn't work anymore. Note that this is completely separate from actual suboptions. For example, "-rawvideo w=123:h=123" still works. (Not that this syntax is worth supporting, but it's needed anyway, for for other things like vf and vo suboptions.) As a consequence of this change, we also have to add new "no-" prefixed options for flag suboptions, so that "--no-input-default-bindings" works. ("--input-no-default-bindings" also works as a consequence of allowing "-input no-default-bindings" - they are handled by the same underlying option.) For --input, always use the full syntax in the manpage. There exist suboptions other than --input (like --tv, --rawvideo, etc.), but since they might be handled differently in the future, don't touch these yet. M_OPT_PREFIXED becomes the default, so remove it. As a minor unrelated cleanup, get rid of M_OPT_MERGE too and use the OPT_SUBSTRUCT() macro in some places. Unrelated: remove the duplicated --tv:buffersize option, fix a typo in changes.rst.
2013-02-21 22:10:21 +01:00
--input-keylist
Prints all keys that can be bound to commands.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
options: drop --opt:subopt option names For all suboptions, "flat" options were available by separating the parent option and the sub option with ":", e.g. "--rawvideo:w=123". Drop this syntax and use "-" as separator. This means even suboptions are available as normal options now, e.g. "--rawvideo-w=123". The old syntax doesn't work anymore. Note that this is completely separate from actual suboptions. For example, "-rawvideo w=123:h=123" still works. (Not that this syntax is worth supporting, but it's needed anyway, for for other things like vf and vo suboptions.) As a consequence of this change, we also have to add new "no-" prefixed options for flag suboptions, so that "--no-input-default-bindings" works. ("--input-no-default-bindings" also works as a consequence of allowing "-input no-default-bindings" - they are handled by the same underlying option.) For --input, always use the full syntax in the manpage. There exist suboptions other than --input (like --tv, --rawvideo, etc.), but since they might be handled differently in the future, don't touch these yet. M_OPT_PREFIXED becomes the default, so remove it. As a minor unrelated cleanup, get rid of M_OPT_MERGE too and use the OPT_SUBSTRUCT() macro in some places. Unrelated: remove the duplicated --tv:buffersize option, fix a typo in changes.rst.
2013-02-21 22:10:21 +01:00
--input-cmdlist
Prints all commands that can be bound to keys.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
options: drop --opt:subopt option names For all suboptions, "flat" options were available by separating the parent option and the sub option with ":", e.g. "--rawvideo:w=123". Drop this syntax and use "-" as separator. This means even suboptions are available as normal options now, e.g. "--rawvideo-w=123". The old syntax doesn't work anymore. Note that this is completely separate from actual suboptions. For example, "-rawvideo w=123:h=123" still works. (Not that this syntax is worth supporting, but it's needed anyway, for for other things like vf and vo suboptions.) As a consequence of this change, we also have to add new "no-" prefixed options for flag suboptions, so that "--no-input-default-bindings" works. ("--input-no-default-bindings" also works as a consequence of allowing "-input no-default-bindings" - they are handled by the same underlying option.) For --input, always use the full syntax in the manpage. There exist suboptions other than --input (like --tv, --rawvideo, etc.), but since they might be handled differently in the future, don't touch these yet. M_OPT_PREFIXED becomes the default, so remove it. As a minor unrelated cleanup, get rid of M_OPT_MERGE too and use the OPT_SUBSTRUCT() macro in some places. Unrelated: remove the duplicated --tv:buffersize option, fix a typo in changes.rst.
2013-02-21 22:10:21 +01:00
--input-js-dev
Specifies the joystick device to use (default: ``/dev/input/js0``).
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
options: drop --opt:subopt option names For all suboptions, "flat" options were available by separating the parent option and the sub option with ":", e.g. "--rawvideo:w=123". Drop this syntax and use "-" as separator. This means even suboptions are available as normal options now, e.g. "--rawvideo-w=123". The old syntax doesn't work anymore. Note that this is completely separate from actual suboptions. For example, "-rawvideo w=123:h=123" still works. (Not that this syntax is worth supporting, but it's needed anyway, for for other things like vf and vo suboptions.) As a consequence of this change, we also have to add new "no-" prefixed options for flag suboptions, so that "--no-input-default-bindings" works. ("--input-no-default-bindings" also works as a consequence of allowing "-input no-default-bindings" - they are handled by the same underlying option.) For --input, always use the full syntax in the manpage. There exist suboptions other than --input (like --tv, --rawvideo, etc.), but since they might be handled differently in the future, don't touch these yet. M_OPT_PREFIXED becomes the default, so remove it. As a minor unrelated cleanup, get rid of M_OPT_MERGE too and use the OPT_SUBSTRUCT() macro in some places. Unrelated: remove the duplicated --tv:buffersize option, fix a typo in changes.rst.
2013-02-21 22:10:21 +01:00
--input-file=<filename>
Read commands from the given file. Mostly useful with a FIFO.
See also ``--slave``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
options: drop --opt:subopt option names For all suboptions, "flat" options were available by separating the parent option and the sub option with ":", e.g. "--rawvideo:w=123". Drop this syntax and use "-" as separator. This means even suboptions are available as normal options now, e.g. "--rawvideo-w=123". The old syntax doesn't work anymore. Note that this is completely separate from actual suboptions. For example, "-rawvideo w=123:h=123" still works. (Not that this syntax is worth supporting, but it's needed anyway, for for other things like vf and vo suboptions.) As a consequence of this change, we also have to add new "no-" prefixed options for flag suboptions, so that "--no-input-default-bindings" works. ("--input-no-default-bindings" also works as a consequence of allowing "-input no-default-bindings" - they are handled by the same underlying option.) For --input, always use the full syntax in the manpage. There exist suboptions other than --input (like --tv, --rawvideo, etc.), but since they might be handled differently in the future, don't touch these yet. M_OPT_PREFIXED becomes the default, so remove it. As a minor unrelated cleanup, get rid of M_OPT_MERGE too and use the OPT_SUBSTRUCT() macro in some places. Unrelated: remove the duplicated --tv:buffersize option, fix a typo in changes.rst.
2013-02-21 22:10:21 +01:00
*NOTE*: When the given file is a FIFO mpv opens both ends so you
can do several `echo "seek 10" > mp_pipe` and the pipe will stay
valid.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
options: drop --opt:subopt option names For all suboptions, "flat" options were available by separating the parent option and the sub option with ":", e.g. "--rawvideo:w=123". Drop this syntax and use "-" as separator. This means even suboptions are available as normal options now, e.g. "--rawvideo-w=123". The old syntax doesn't work anymore. Note that this is completely separate from actual suboptions. For example, "-rawvideo w=123:h=123" still works. (Not that this syntax is worth supporting, but it's needed anyway, for for other things like vf and vo suboptions.) As a consequence of this change, we also have to add new "no-" prefixed options for flag suboptions, so that "--no-input-default-bindings" works. ("--input-no-default-bindings" also works as a consequence of allowing "-input no-default-bindings" - they are handled by the same underlying option.) For --input, always use the full syntax in the manpage. There exist suboptions other than --input (like --tv, --rawvideo, etc.), but since they might be handled differently in the future, don't touch these yet. M_OPT_PREFIXED becomes the default, so remove it. As a minor unrelated cleanup, get rid of M_OPT_MERGE too and use the OPT_SUBSTRUCT() macro in some places. Unrelated: remove the duplicated --tv:buffersize option, fix a typo in changes.rst.
2013-02-21 22:10:21 +01:00
--input-test
Input test mode. Instead of executing commands on key presses, mpv
will show the keys and the bound commands on the OSD. Has to be used
with a dummy video, and the normal ways to quit the player will not
work (key bindings that normally quit will be shown on OSD only, just
like any other binding).
input: add input test mode In input test mode, key bindings won't be executed, but are shown on the OSD. The OSD includes various information, such as the name of the key, the command itself, whether it's builtin, and the config file location it was defined. The input test mode can be enabled with "--input=test". No effort is spent trying to react to key bindings that normally exit the player; they are treated just like any other binding.
2012-10-13 21:10:20 +02:00
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--ipv4-only-proxy
Skip any HTTP proxy for IPv6 addresses. It will still be used for IPv4
connections.
manpage: mark HTTP related options as deprecated/broken Commit c02f25 switched the "http://" protocol to use ffmpeg's HTTP implementation (stream_lavf.c), instead of the mplayer internal one (http.c). Unfortunately, it turns out that there are some network related options that are not respected by stream_lavf.c, and consequently do not work anymore for "http://" URLs. This might be fixed later. Mark them as deprecated for now, as it might take arbitrarily long until this is taken care of.
2012-12-11 01:04:13 +01:00
*WARNING*: works with the deprecated ``mp_http://`` protocol only.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--joystick, --no-joystick
Enable/disable joystick support. Enabled by default.
manpage: various fixes
2012-11-15 14:25:20 +01:00
--no-keepaspect, --keepaspect
--no-keepaspect will always stretch the video to window size, and will
disable the window manager hints that force the window aspect ratio.
(Ignored in fullscreen mode.)
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
core: add --keep-open, which doesn't close the file on EOF The --keep-open option causes mpv not to close the current file. Instead, it will pause, and allow the user to seek around. When seeking beyond the end of the file, mpv does a precise seek back to the previous last known position that produced video output. In some corner cases, mpv might not be able to produce video output at all, despite having created a VO. (Possibly when only 1 frame could be decoded, but the video filter chain queues frames. Then a VO would be created, without sending an actual video frame to the VO.) In these cases, the VO window will not redraw, not even OSD. Based on a patch by coax [1]. [1] http://devel.mplayer2.org/ticket/210#comment:4
2012-11-13 00:56:20 +01:00
--keep-open
Do not terminate when playing or seeking beyond the end of the file.
Instead, pause the player. When trying to seek beyond end of the file, the
player will pause at an arbitrary playback position (or, in corner cases,
not redraw the window at all).
*NOTE*: this option is not respected when using ``--frames``, ``--end``,
``--length``, or when passing a chapter range to ``--chapter``. Explicitly
skipping to the next file or skipping beyond the last chapter will terminate
playback as well, even if ``--keep-open`` is given.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--key-fifo-size=<2-65000>
Specify the size of the FIFO that buffers key events (default: 7). If it
is too small some events may be lost. The main disadvantage of setting it
to a very large value is that if you hold down a key triggering some
particularly slow command then the player may be unresponsive while it
processes all the queued commands.
--lavdopts=<option1:option2:...>
Specify libavcodec decoding parameters. Separate multiple options with a
colon.
*EXAMPLE*: ``--lavdopts=gray:skiploopfilter=all:skipframe=nonref``
Available options are:
bitexact
Only use bit-exact algorithms in all decoding steps (for codec
testing).
bug=<value>
Manually work around encoder bugs.
:0: nothing
:1: autodetect bugs (default)
:2: (msmpeg4v3): some old lavc generated msmpeg4v3 files (no
autodetection)
:4: (mpeg4): Xvid interlacing bug (autodetected if fourcc==XVIX)
:8: (mpeg4): UMP4 (autodetected if fourcc==UMP4)
:16: (mpeg4): padding bug (autodetected)
:32: (mpeg4): illegal vlc bug (autodetected per fourcc)
:64: (mpeg4): Xvid and DivX qpel bug (autodetected per
fourcc/version)
:128: (mpeg4): old standard qpel (autodetected per fourcc/version)
:256: (mpeg4): another qpel bug (autodetected per fourcc/version)
:512: (mpeg4): direct-qpel-blocksize bug (autodetected per
fourcc/version)
:1024: (mpeg4): edge padding bug (autodetected per fourcc/version)
debug=<value>
Display debugging information.
:0: disabled
:1: picture info
:2: rate control
:4: bitstream
:8: macroblock (MB) type
:16: per-block quantization parameter (QP)
:32: motion vector
video: remove slice based filtering and video output Slices allowed filtering or drawing video in horizontal bands or blocks. This allowed working on the video in smaller units. In theory, this could bring a performance win by lowering cache pressure, as you didn't have to keep the whole video frame in cache while filtering, only the slice. In practice, the slice code path was barely used for the following reasons: - Multithreaded decoding with ffmpeg didn't use slices. The ffmpeg slice callback was disabled, because it can be called from another thread, and the mplayer video chain is not thread-safe. - There was nothing that would turn "full" images into appropriate slices, so slices were rarely used. - Most filters didn't actually support slices. On the other hand, supporting slices lead to code duplication and more complex code in general. I made some experiments and didn't find any actual measurable performance improvements when using slices. Even ffmpeg removed slices based filtering from libavfilter in favor of simpler code. The most broken thing about the slices code path is that slices can't be queued, like it is done for images in vo.c.
2012-11-04 18:16:36 +01:00
:0x0040: motion vector visualization
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
:0x0080: macroblock (MB) skip
:0x0100: startcode
:0x0200: PTS
:0x0400: error resilience
:0x0800: memory management control operations (H.264)
:0x1000: bugs
:0x2000: Visualize quantization parameter (QP), lower QP are tinted
greener.
:0x4000: Visualize block types.
ec=<value>
Set error concealment strategy.
:1: Use strong deblock filter for damaged MBs.
:2: iterative motion vector (MV) search (slow)
:3: all (default)
fast (MPEG-2, MPEG-4, and H.264 only)
Enable optimizations which do not comply to the specification and
might potentially cause problems, like simpler dequantization, simpler
motion compensation, assuming use of the default quantization matrix,
assuming YUV 4:2:0 and skipping a few checks to detect damaged
bitstreams.
gray
grayscale only decoding (a bit faster than with color)
idct=<0-99>
For best decoding quality use the same IDCT algorithm for decoding and
encoding. This may come at a price in accuracy, though.
o=<key>=<value>[,<key>=<value>[,...]]
Pass AVOptions to libavcodec decoder. Note, a patch to make the o=
unneeded and pass all unknown options through the AVOption system is
welcome. A full list of AVOptions can be found in the FFmpeg manual.
*EXAMPLE*: ``o=debug=pict``
sb=<number> (MPEG-2 only)
Skip the given number of macroblock rows at the bottom.
st=<number> (MPEG-2 only)
Skip the given number of macroblock rows at the top.
skiploopfilter=<skipvalue> (H.264 only)
Skips the loop filter (AKA deblocking) during H.264 decoding. Since
the filtered frame is supposed to be used as reference for decoding
dependent frames this has a worse effect on quality than not doing
deblocking on e.g. MPEG-2 video. But at least for high bitrate HDTV
this provides a big speedup with no visible quality loss.
<skipvalue> can be one of the following:
:none: Never skip.
:default: Skip useless processing steps (e.g. 0 size packets in AVI).
:nonref: Skip frames that are not referenced (i.e. not used for
decoding other frames, the error cannot "build up").
:bidir: Skip B-Frames.
:nonkey: Skip all frames except keyframes.
:all: Skip all frames.
skipidct=<skipvalue> (MPEG-1/2 only)
Skips the IDCT step. This degrades quality a lot of in almost all
cases (see skiploopfilter for available skip values).
skipframe=<skipvalue>
Skips decoding of frames completely. Big speedup, but jerky motion and
sometimes bad artifacts (see skiploopfilter for available skip
values).
threads=<0-16>
Number of threads to use for decoding. Whether threading is actually
supported depends on codec. 0 means autodetect number of cores on the
machine and use that, up to the maximum of 16. (default: 0)
vismv=<value>
Visualize motion vectors.
:0: disabled
:1: Visualize forward predicted MVs of P-frames.
:2: Visualize forward predicted MVs of B-frames.
:4: Visualize backward predicted MVs of B-frames.
--lavfdopts=<option1:option2:...>
Specify parameters for libavformat demuxers (``--demuxer=lavf``). Separate
multiple options with a colon.
Available suboptions are:
analyzeduration=<value>
Maximum length in seconds to analyze the stream properties.
demux_lavf: make minimum probe score customizable, remove lavf_preferred libavformat wants to read a full ~400KB of data to determine whether it's really AAC. This causes slow startup with AAC web radio streams [1] (possible due to a broken initial packet). There are similar issues with other file formats. Make the probe "score" (libavformat's mechanism for testing file formats) configurable with the -lavfdtops:probescore option. This allows lowering the amount of data read on probing. If the probe score is below the probescore option value, demux_lavf will try to get a higher score by feeding more data to libavformat, until the required score or the max. probe size is reached. Remove the lavf_preferred demuxer entry. This had a purpose in mplayer-svn, but now there doesn't seem to be any good reason for it to exist. Make sure that our native "good" demuxers are above demux_lavf in demuxer_list[] instead (so that they are preferred). [1] http://lr2mp0.latvijasradio.lv:8000
2012-12-08 20:14:13 +01:00
probescore=<1-100>
Minimum required libavformat probe score. Lower values will require
less data to be loaded (makes streams start faster), but makes file
format detection less reliable. Can be used to force auto-detected
libavformat demuxers, even if libavformat considers the detection not
reliable enough. (Default: 26.)
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
format=<value>
Force a specific libavformat demuxer.
o=<key>=<value>[,<key>=<value>[,...]]
Pass AVOptions to libavformat demuxer.
Note, a patch to make the *o=* unneeded and pass all unknown options
through the AVOption system is welcome. A full list of AVOptions can
be found in the FFmpeg manual. Note that some options may conflict
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
with mpv options.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
*EXAMPLE*: ``o=fflags=+ignidx``
probesize=<value>
Maximum amount of data to probe during the detection phase. In the
case of MPEG-TS this value identifies the maximum number of TS packets
to scan.
cryptokey=<hexstring>
Encryption key the demuxer should use. This is the raw binary data of
the key converted to a hexadecimal string.
options: rename -ss and -endpos, allow relative times Rename the -ss option to -start, and -endpos to -length. Add a -end option. The -end option always specifies an absolute end time, as opposed to -endpos/-length. All these options (--start, --end, --length) now accept relative times. Percent positions (e.g. "--start=30%") are interpreted as fractions of the file duration. Negative times (e.g. "--start=-1:00) are interpreted relative to the end of the file. Chapters (e.g. "--start=#3") yield the chapter's time position. The chapter support might be able to replace --chapter completely, but for now I am not sure how well this works out with e.g. DVDs and BDs, and a separate --chapter option is useful interface-wise.
2012-11-15 18:49:17 +01:00
--length=<relative time>
Stop after a given time relative to the start time.
See ``--start`` for valid option values and examples.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--lirc, --no-lirc
Enable/disable LIRC support. Enabled by default.
--lircconf=<filename>
(LIRC only)
Specifies a configuration file for LIRC (default: ``~/.lircrc``).
--list-options
Prints all available options.
--list-properties
Print a list of the available properties.
options: accept "yes" and "no" only for flags This removes the alternative values like "off", "0", "false" etc., and also the non-English versions of these. This is done for general consistency. It's better to have a single way of doing things when multiple ways don't add singificant value. Also update some choices for consistency.
2012-09-18 15:50:24 +02:00
--loop=<number|inf|no>
Loops playback <number> times. ``inf`` means forever and ``no`` disables
mplayer: make --loop loop the playlist instead of each playlist entry This is simpler and more useful. We could add a new switch for the old functionality, but that would probably be more confusing than helpful. When passing only a single file to the command line, this commit shouldn't change behavior. (Classic mplayer provided both features by duplicating the loop functionality in the "playtree".)
2013-01-09 01:41:02 +01:00
looping. If several files are specified on command line, the whole playlist
is looped.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--mc=<seconds/frame>
Maximum A-V sync correction per frame (in seconds)
--mf=<option1:option2:...>
demux_mf: allow displaying single image files, various cleanups Enable autoprobing for demux_mf, so that image files can be directly displayed with e.g. "mpv file.jpg --pause". (The --pause switch is needed to prevent the window from closing immediately.) Since demux_mf doesn't have any real file format probing and goes by file extension only, move the demuxer down the demuxer list to ensure it's checked last. (ffmpeg's demux_mf equivalent, "image2", probes by file extensions too, and there doesn't seem to be anything that can probe typical image file formats from binary data.) Remove the --mf "w" and "h" suboptions. Don't pass the width/height to the video stream header. Both of these are useless, because the decoder reads the real image size at a later point from the file headers. Remove setting the BITMAPINFOHEADER as well, as vd_lavc doesn't need this. Enable --correct-pts by default. This fixes displaying a single image with vo_vdpau (as mentioned by uau). Keep around a pointer to the sh_video stream header instead of accessing demuxer->video->sh_video. Fixes a crash when deselecting the video track. Note that the format probing is incorrect when opening images from HTTP locations. File extensions don't have to match the actual file format. A correct implementation would require to check the MIME type, or to probe the binary data correctly.
2012-11-16 19:12:56 +01:00
Used when decoding from multiple PNG or JPEG files with ``mf://``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Available options are:
:fps=<value>: output fps (default: 25)
:type=<value>: input file type (available: jpeg, png, tga, sgi)
--mixer=<device>
Use a mixer device different from the default ``/dev/mixer``. For ALSA
this is the mixer name.
--mixer-channel=<name[,index]>
(``--ao=oss`` and ``--ao=alsa`` only)
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
This option will tell mpv to use a different channel for controlling
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
volume than the default PCM. Options for OSS include **vol, pcm, line**.
For a complete list of options look for ``SOUND_DEVICE_NAMES`` in
``/usr/include/linux/soundcard.h``. For ALSA you can use the names e.g.
alsamixer displays, like **Master, Line, PCM**.
*NOTE*: ALSA mixer channel names followed by a number must be specified in
the <name,number> format, i.e. a channel labeled 'PCM 1' in alsamixer must
be converted to PCM,1.
--monitoraspect=<ratio>
Set the aspect ratio of your monitor or TV screen. A value of 0 disables a
previous setting (e.g. in the config file). Overrides the
``--monitorpixelaspect`` setting if enabled.
See also ``--monitorpixelaspect`` and ``--aspect``.
*EXAMPLE*:
- ``--monitoraspect=4:3`` or ``--monitoraspect=1.3333``
- ``--monitoraspect=16:9`` or ``--monitoraspect=1.7777``
--monitorpixelaspect=<ratio>
Set the aspect of a single pixel of your monitor or TV screen (default:
1). A value of 1 means square pixels (correct for (almost?) all LCDs). See
also ``--monitoraspect`` and ``--aspect``.
--mouse-movements
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
Permit mpv to receive pointer events reported by the video output
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
driver. Necessary to select the buttons in DVD menus. Supported for
X11-based VOs (x11, xv, etc) and the gl, direct3d and corevideo VOs.
--mouseinput, --no-mouseinput
Enabled by default. Disable mouse button press/release input
(mozplayerxp's context menu relies on this option).
manpage: various fixes
2012-11-15 14:25:20 +01:00
--no-msgcolor
Disable colorful console output on terminals.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--msglevel=<module1=level1:module2=level2:...>
Control verbosity directly for each module. The *all* module changes the
verbosity of all the modules not explicitly specified on the command line.
See ``--msglevel=help`` for a list of all modules.
*NOTE*: Some messages are printed before the command line is parsed and
are therefore not affected by ``--msglevel``. To control these messages
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
you have to use the ``MPV_VERBOSE`` environment variable; see its
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
description below for details.
Available levels:
:-1: complete silence
:0: fatal messages only
:1: error messages
:2: warning messages
:3: short hints
:4: informational messages
:5: status messages (default)
:6: verbose messages
:7: debug level 2
:8: debug level 3
:9: debug level 4
--msgmodule
Prepend module name in front of each console message.
options: add --mute for setting initial audio mute status Similar to --volume. Takes this as opportunity to move the variable corresponding to --volume into MPOpts.
2012-11-15 19:22:01 +01:00
--mute=<auto|yes|no>
Set startup audio mute status. ``auto`` (default) will not change the mute
status. Also see ``--volume``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--name
Set the window class name for X11-based video output methods.
options: rename -ni to -avi-ni The -ni option does something with the AVI demuxer only. Also fix misleading error messages when the packet queue overflows (it suggests using -ni, which in the typical case of playing NI AVI files will not work, as demux_lavf is used by default).
2012-10-28 20:23:15 +01:00
--avi-ni
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
(Internal AVI demuxer which is not used by default only)
Force usage of non-interleaved AVI parser (fixes playback of some bad AVI
files).
man: remove documentation for deleted stuff Also make some minor cosmetic changes.
2012-08-02 19:31:33 +02:00
--no-aspect
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Ignore aspect ratio information from video file and assume the video has
square pixels. See also ``--aspect``.
man: remove documentation for deleted stuff Also make some minor cosmetic changes.
2012-08-02 19:31:33 +02:00
--no-bps
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
(Internal AVI demuxer which is not used by default only)
Do not use average byte/second value for A-V sync. Helps with some AVI
files with broken header.
man: remove documentation for deleted stuff Also make some minor cosmetic changes.
2012-08-02 19:31:33 +02:00
--no-cache
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Turn off input stream caching. See ``--cache``.
man: remove documentation for deleted stuff Also make some minor cosmetic changes.
2012-08-02 19:31:33 +02:00
--no-colorkey
manpage: don't mention nonexistent VOs, command line switches, etc. Very likely doesn't remove all outdated things.
2012-08-22 15:47:02 +02:00
Disables colorkeying. Only supported by the xv (see ``--vo=xv:ck``) video
output driver.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
options: change --no-config option, make it apply to input.conf as well Simplify --no-config and make it a normal flag option, and doesn't take an argument anymore. You can get the same behavior by using --no-config and then --include to explicitly load a certain config file. Make --no-config work for input.conf as well. Make it so that --input:conf=file still works in this case. As a technically unrelated change, the file argument now works as one would expect, instead of making it relatively to "~/.mpv/". This makes for simpler code and easier to understand option semantics. We can also print better error messages.
2013-02-08 23:52:06 +01:00
--no-config
Do not load default configuration files. This prevents loading of
``~/.mpv/config`` and ``~/.mpv/input.conf``, as well as loading the
same files from system wide configuration directories.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
options: change --no-config option, make it apply to input.conf as well Simplify --no-config and make it a normal flag option, and doesn't take an argument anymore. You can get the same behavior by using --no-config and then --include to explicitly load a certain config file. Make --no-config work for input.conf as well. Make it so that --input:conf=file still works in this case. As a technically unrelated change, the file argument now works as one would expect, instead of making it relatively to "~/.mpv/". This makes for simpler code and easier to understand option semantics. We can also print better error messages.
2013-02-08 23:52:06 +01:00
Loading of some configuration files is not affected by this option, such
as configuration files for cddb, DVB code and fontconfig.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
options: change --no-config option, make it apply to input.conf as well Simplify --no-config and make it a normal flag option, and doesn't take an argument anymore. You can get the same behavior by using --no-config and then --include to explicitly load a certain config file. Make --no-config work for input.conf as well. Make it so that --input:conf=file still works in this case. As a technically unrelated change, the file argument now works as one would expect, instead of making it relatively to "~/.mpv/". This makes for simpler code and easier to understand option semantics. We can also print better error messages.
2013-02-08 23:52:06 +01:00
*NOTE*: Files explicitly requested by command line options, like
``--include`` or ``--use-filedir-conf``, will still be loaded.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
man: remove documentation for deleted stuff Also make some minor cosmetic changes.
2012-08-02 19:31:33 +02:00
--no-idx
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Do not use index present in the file even if one is present.
man: remove documentation for deleted stuff Also make some minor cosmetic changes.
2012-08-02 19:31:33 +02:00
--no-audio
options: change --vid, --aid, --sid options The --vid, --aid, --sid options now accept the values 'off' and 'auto', instead of having the user deal with the numeric values -2 and -1. The numeric values are not allowed anymore. Remove the --audio option. It was probably meant as compensation option for --no-audio. There are no such options for sub/video, and it was not documented, so just remove it. The replacement is "--aid=auto". Also do some updates to the manpage.
2012-09-05 02:39:12 +02:00
Do not play sound. With some demuxers this may not work. In those cases
you can try ``--ao=null`` instead.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
man: remove documentation for deleted stuff Also make some minor cosmetic changes.
2012-08-02 19:31:33 +02:00
--no-sub
options: change --vid, --aid, --sid options The --vid, --aid, --sid options now accept the values 'off' and 'auto', instead of having the user deal with the numeric values -2 and -1. The numeric values are not allowed anymore. Remove the --audio option. It was probably meant as compensation option for --no-audio. There are no such options for sub/video, and it was not documented, so just remove it. The replacement is "--aid=auto". Also do some updates to the manpage.
2012-09-05 02:39:12 +02:00
Disables display of internal and external subtitles.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
man: remove documentation for deleted stuff Also make some minor cosmetic changes.
2012-08-02 19:31:33 +02:00
--no-video
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Do not play video. With some demuxers this may not work. In those cases
options: change --vid, --aid, --sid options The --vid, --aid, --sid options now accept the values 'off' and 'auto', instead of having the user deal with the numeric values -2 and -1. The numeric values are not allowed anymore. Remove the --audio option. It was probably meant as compensation option for --no-audio. There are no such options for sub/video, and it was not documented, so just remove it. The replacement is "--aid=auto". Also do some updates to the manpage.
2012-09-05 02:39:12 +02:00
you can try ``--vo=null`` instead.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--ontop
Makes the player window stay on top of other windows. Supported by video
manpage: don't mention nonexistent VOs, command line switches, etc. Very likely doesn't remove all outdated things.
2012-08-22 15:47:02 +02:00
output drivers which use X11, as well as corevideo.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--ordered-chapters, --no-ordered-chapters
Enabled by default.
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
Disable support for Matroska ordered chapters. mpv will not load or
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
search for video segments from other files, and will also ignore any
chapter order specified for the main file.
osd: add --no-osd-bar option to disable the OSD bar In addition to disabling the OSD bar physically, also add some fallbacks to OSD text in places the OSD bar would have been used.
2013-02-16 21:17:59 +01:00
--no-osd-bar, --osd-bar
Disable display of the OSD bar. This will make some things (like seeking)
use OSD text messages instead of the bar.
You can configure this on a per-command basis in input.conf using ``osd-``
prefixes, see ``Input command prefixes``. If you want to disable the OSD
completely, use ``--osd-level=0``.
osd: draw the OSD bar with ASS vector drawings Drawing the bar with vector drawings (instead with characters from the OSD font) offers more flexibility and looks better. This also adds chapter marks to the OSD bar, which are visible as small triangles on the top and bottom inner border of the bar. Change the default position of the OSD bar below the center of the screen. This is less annoying than putting the bar directly into the center of the view, where it obscures the video. The new position is not quite on the bottom of the screen to avoid collisions with subtitles. The old centered position can be forced with ``--osd-bar-align-y=0``. Also make it possible to change the OSD bar width/height with the new --osd-bar-w and --osd-bar-h options. It's possible that the new OSD bar renders much slower than the old one. There are two reasons for this: 1. the character based bar allowed libass to cache each character, while the vector drawing forces it to redraw every time the bar position changes. 2., the bar position is updated at a much higher granularity (the bar position is passed along as float instead of as integer in the range 0-100, so the bar will be updated on every single video frame).
2013-03-30 20:08:56 +01:00
--osd-bar-align-x=<-1-1>
osd: add --osd-bar-align-x/y options to control OSD bar position
2013-02-14 20:43:00 +01:00
Position of the OSD bar. -1 is far left, 0 is centered, 1 is far right.
osd: draw the OSD bar with ASS vector drawings Drawing the bar with vector drawings (instead with characters from the OSD font) offers more flexibility and looks better. This also adds chapter marks to the OSD bar, which are visible as small triangles on the top and bottom inner border of the bar. Change the default position of the OSD bar below the center of the screen. This is less annoying than putting the bar directly into the center of the view, where it obscures the video. The new position is not quite on the bottom of the screen to avoid collisions with subtitles. The old centered position can be forced with ``--osd-bar-align-y=0``. Also make it possible to change the OSD bar width/height with the new --osd-bar-w and --osd-bar-h options. It's possible that the new OSD bar renders much slower than the old one. There are two reasons for this: 1. the character based bar allowed libass to cache each character, while the vector drawing forces it to redraw every time the bar position changes. 2., the bar position is updated at a much higher granularity (the bar position is passed along as float instead of as integer in the range 0-100, so the bar will be updated on every single video frame).
2013-03-30 20:08:56 +01:00
--osd-bar-align-y=<-1-1>
osd: add --osd-bar-align-x/y options to control OSD bar position
2013-02-14 20:43:00 +01:00
Position of the OSD bar. -1 is top, 0 is centered, 1 is bottom.
osd: draw the OSD bar with ASS vector drawings Drawing the bar with vector drawings (instead with characters from the OSD font) offers more flexibility and looks better. This also adds chapter marks to the OSD bar, which are visible as small triangles on the top and bottom inner border of the bar. Change the default position of the OSD bar below the center of the screen. This is less annoying than putting the bar directly into the center of the view, where it obscures the video. The new position is not quite on the bottom of the screen to avoid collisions with subtitles. The old centered position can be forced with ``--osd-bar-align-y=0``. Also make it possible to change the OSD bar width/height with the new --osd-bar-w and --osd-bar-h options. It's possible that the new OSD bar renders much slower than the old one. There are two reasons for this: 1. the character based bar allowed libass to cache each character, while the vector drawing forces it to redraw every time the bar position changes. 2., the bar position is updated at a much higher granularity (the bar position is passed along as float instead of as integer in the range 0-100, so the bar will be updated on every single video frame).
2013-03-30 20:08:56 +01:00
--osd-bar-w=<1-100>
Width of the OSD bar, in percentage of the screen width (default: 75).
A value of 0.5 means the bar is half the screen wide.
--osd-bar-h=<0.1-50>
Height of the OSD bar, in percentage of the screen height (default: 3.125).
sub: add --sub-text-* options to unstyled text subtitles font Before this commit, the --osd-* options (like --osd-font-size etc.) configured both the OSD and subtitle font. Make them separate, and add --sub-text-* options (like --sub-text-size etc.). Now --osd-* affects the OSD font only, and --sub-text-* unstyled text subtitles only.
2013-01-04 16:10:17 +01:00
--osd-back-color=<#RRGGBB>, --sub-text-back-color=<#RRGGBB>
See ``--osd-color``. Color used for OSD/sub text background.
manpage: sort --osd-* options They were more or less grouped by usefulness, but since everything else in the manpage is sorted alphabetically, it's better to be consistent and sort these options as well.
2013-01-04 16:04:08 +01:00
sub: add --sub-text-* options to unstyled text subtitles font Before this commit, the --osd-* options (like --osd-font-size etc.) configured both the OSD and subtitle font. Make them separate, and add --sub-text-* options (like --sub-text-size etc.). Now --osd-* affects the OSD font only, and --sub-text-* unstyled text subtitles only.
2013-01-04 16:10:17 +01:00
--osd-border-color=<#RRGGBB>, --sub-text-border-color=<#RRGGBB>
See ``--osd-color``. Color used for the OSD/sub font border.
manpage: sort --osd-* options They were more or less grouped by usefulness, but since everything else in the manpage is sorted alphabetically, it's better to be consistent and sort these options as well.
2013-01-04 16:04:08 +01:00
sub: add --sub-text-* options to unstyled text subtitles font Before this commit, the --osd-* options (like --osd-font-size etc.) configured both the OSD and subtitle font. Make them separate, and add --sub-text-* options (like --sub-text-size etc.). Now --osd-* affects the OSD font only, and --sub-text-* unstyled text subtitles only.
2013-01-04 16:10:17 +01:00
*NOTE*: ignored when ``--osd-back-color``/``--sub-text-back-color`` is
specified (or more exactly: when that option is not set to completely
transparent).
manpage: sort --osd-* options They were more or less grouped by usefulness, but since everything else in the manpage is sorted alphabetically, it's better to be consistent and sort these options as well.
2013-01-04 16:04:08 +01:00
sub: add --sub-text-* options to unstyled text subtitles font Before this commit, the --osd-* options (like --osd-font-size etc.) configured both the OSD and subtitle font. Make them separate, and add --sub-text-* options (like --sub-text-size etc.). Now --osd-* affects the OSD font only, and --sub-text-* unstyled text subtitles only.
2013-01-04 16:10:17 +01:00
--osd-border-size=<size>, --sub-text-border-size=<size>
Size of the OSD/sub font border in scaled pixels (see ``--osd-font-size``
for details). A value of 0 disables borders.
manpage: sort --osd-* options They were more or less grouped by usefulness, but since everything else in the manpage is sorted alphabetically, it's better to be consistent and sort these options as well.
2013-01-04 16:04:08 +01:00
Default: 2.5.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
sub: add --sub-text-* options to unstyled text subtitles font Before this commit, the --osd-* options (like --osd-font-size etc.) configured both the OSD and subtitle font. Make them separate, and add --sub-text-* options (like --sub-text-size etc.). Now --osd-* affects the OSD font only, and --sub-text-* unstyled text subtitles only.
2013-01-04 16:10:17 +01:00
--osd-color=<#RRGGBB|#AARRGGBB>, --sub-text-color=<#RRGGBB|#AARRGGBB>
Specify the color used for OSD/unstyled text subtitles.
osd: make the OSD and sub font more customizable Make more aspects of the OSD font customizable. This also affects the font used for unstyled subtitles (such as SRT), or when using the --no-ass option. This adds back some customizability that was lost with commit 74e7a1 (osd: use libass for OSD rendering). Removed options: --ass-border-color --ass-color --font --subfont --subfont-text-scale Added options: --osd-color --osd-border --osd-back-color --osd-shadow-color --osd-font --osd-font-size --osd-border-size --osd-margin-x --osd-margin-y --osd-shadow-offset --osd-spacing --sub-scale The font size is now specified in pixels as it would be rendered on a window with a height of 720 pixels. OSD and subtitles are always scaled with the window height, so specifying or expecting an absolute font size doesn't make sense. Such scaled pixel units are used to specify font border etc. as well. (Note: the font size is directly passed to libass. How the fonts are actually rasterized is outside of our control, but in theory ASS font sizes map to "script" pixels and then are scaled to screen size.) The default settings should be about the same, with slight difference due to rounding to the new scales. The OSD and subtitle fonts are not separately configurable. It has limited use and would double the number of newly added options, which would be more confusing than helpful. It could be easily added later, should the need arise. Other small details that change: - ASS_Style.Encoding is not set to -1 for subs anymore (assuming subs use VSFilter direction in -no-ass mode too) - use a different WrapStyle for OSD - ASS forced styles are not applied to OSD
2012-11-17 20:56:45 +01:00
manpage: minor improvements
2012-12-21 20:36:08 +01:00
The color is specified as a RGB hex triplet, and each 2-digit group
expresses a color value in the range 0 (``00``) to 255 (`FF`).
For example, ``#FF0000`` is red. This is similar to web colors.
osd: make the OSD and sub font more customizable Make more aspects of the OSD font customizable. This also affects the font used for unstyled subtitles (such as SRT), or when using the --no-ass option. This adds back some customizability that was lost with commit 74e7a1 (osd: use libass for OSD rendering). Removed options: --ass-border-color --ass-color --font --subfont --subfont-text-scale Added options: --osd-color --osd-border --osd-back-color --osd-shadow-color --osd-font --osd-font-size --osd-border-size --osd-margin-x --osd-margin-y --osd-shadow-offset --osd-spacing --sub-scale The font size is now specified in pixels as it would be rendered on a window with a height of 720 pixels. OSD and subtitles are always scaled with the window height, so specifying or expecting an absolute font size doesn't make sense. Such scaled pixel units are used to specify font border etc. as well. (Note: the font size is directly passed to libass. How the fonts are actually rasterized is outside of our control, but in theory ASS font sizes map to "script" pixels and then are scaled to screen size.) The default settings should be about the same, with slight difference due to rounding to the new scales. The OSD and subtitle fonts are not separately configurable. It has limited use and would double the number of newly added options, which would be more confusing than helpful. It could be easily added later, should the need arise. Other small details that change: - ASS_Style.Encoding is not set to -1 for subs anymore (assuming subs use VSFilter direction in -no-ass mode too) - use a different WrapStyle for OSD - ASS forced styles are not applied to OSD
2012-11-17 20:56:45 +01:00
You can specify transparency by specifying an alpha value in the form
``#AARRGGBB``. 0 is fully transparent, while ``FF`` is opaque (opaque is
default with the shorter color specification).
manpage: minor improvements
2012-12-21 20:36:08 +01:00
*EXAMPLE*:
- ``--osd-color='#FF0000'`` set OSD to opaque red
- ``--osd-color='#C0808080'`` set OSD to 50% gray with 75% alpha
manpage: sort --osd-* options They were more or less grouped by usefulness, but since everything else in the manpage is sorted alphabetically, it's better to be consistent and sort these options as well.
2013-01-04 16:04:08 +01:00
--osd-duration=<time>
Set the duration of the OSD messages in ms (default: 1000).
osd: make the OSD and sub font more customizable Make more aspects of the OSD font customizable. This also affects the font used for unstyled subtitles (such as SRT), or when using the --no-ass option. This adds back some customizability that was lost with commit 74e7a1 (osd: use libass for OSD rendering). Removed options: --ass-border-color --ass-color --font --subfont --subfont-text-scale Added options: --osd-color --osd-border --osd-back-color --osd-shadow-color --osd-font --osd-font-size --osd-border-size --osd-margin-x --osd-margin-y --osd-shadow-offset --osd-spacing --sub-scale The font size is now specified in pixels as it would be rendered on a window with a height of 720 pixels. OSD and subtitles are always scaled with the window height, so specifying or expecting an absolute font size doesn't make sense. Such scaled pixel units are used to specify font border etc. as well. (Note: the font size is directly passed to libass. How the fonts are actually rasterized is outside of our control, but in theory ASS font sizes map to "script" pixels and then are scaled to screen size.) The default settings should be about the same, with slight difference due to rounding to the new scales. The OSD and subtitle fonts are not separately configurable. It has limited use and would double the number of newly added options, which would be more confusing than helpful. It could be easily added later, should the need arise. Other small details that change: - ASS_Style.Encoding is not set to -1 for subs anymore (assuming subs use VSFilter direction in -no-ass mode too) - use a different WrapStyle for OSD - ASS forced styles are not applied to OSD
2012-11-17 20:56:45 +01:00
sub: add --sub-text-* options to unstyled text subtitles font Before this commit, the --osd-* options (like --osd-font-size etc.) configured both the OSD and subtitle font. Make them separate, and add --sub-text-* options (like --sub-text-size etc.). Now --osd-* affects the OSD font only, and --sub-text-* unstyled text subtitles only.
2013-01-04 16:10:17 +01:00
--osd-font=<pattern>, --sub-text-font=<pattern>
manpage: sort --osd-* options They were more or less grouped by usefulness, but since everything else in the manpage is sorted alphabetically, it's better to be consistent and sort these options as well.
2013-01-04 16:04:08 +01:00
Specify font to use for OSD and for subtitles that do not themselves
specify a particular font. The default is ``Sans``.
osd: make the OSD and sub font more customizable Make more aspects of the OSD font customizable. This also affects the font used for unstyled subtitles (such as SRT), or when using the --no-ass option. This adds back some customizability that was lost with commit 74e7a1 (osd: use libass for OSD rendering). Removed options: --ass-border-color --ass-color --font --subfont --subfont-text-scale Added options: --osd-color --osd-border --osd-back-color --osd-shadow-color --osd-font --osd-font-size --osd-border-size --osd-margin-x --osd-margin-y --osd-shadow-offset --osd-spacing --sub-scale The font size is now specified in pixels as it would be rendered on a window with a height of 720 pixels. OSD and subtitles are always scaled with the window height, so specifying or expecting an absolute font size doesn't make sense. Such scaled pixel units are used to specify font border etc. as well. (Note: the font size is directly passed to libass. How the fonts are actually rasterized is outside of our control, but in theory ASS font sizes map to "script" pixels and then are scaled to screen size.) The default settings should be about the same, with slight difference due to rounding to the new scales. The OSD and subtitle fonts are not separately configurable. It has limited use and would double the number of newly added options, which would be more confusing than helpful. It could be easily added later, should the need arise. Other small details that change: - ASS_Style.Encoding is not set to -1 for subs anymore (assuming subs use VSFilter direction in -no-ass mode too) - use a different WrapStyle for OSD - ASS forced styles are not applied to OSD
2012-11-17 20:56:45 +01:00
manpage: sort --osd-* options They were more or less grouped by usefulness, but since everything else in the manpage is sorted alphabetically, it's better to be consistent and sort these options as well.
2013-01-04 16:04:08 +01:00
*EXAMPLE*:
- ``--osd-font='Bitstream Vera Sans'``
- ``--osd-font='Bitstream Vera Sans:style=Bold'`` (fontconfig pattern)
osd: make the OSD and sub font more customizable Make more aspects of the OSD font customizable. This also affects the font used for unstyled subtitles (such as SRT), or when using the --no-ass option. This adds back some customizability that was lost with commit 74e7a1 (osd: use libass for OSD rendering). Removed options: --ass-border-color --ass-color --font --subfont --subfont-text-scale Added options: --osd-color --osd-border --osd-back-color --osd-shadow-color --osd-font --osd-font-size --osd-border-size --osd-margin-x --osd-margin-y --osd-shadow-offset --osd-spacing --sub-scale The font size is now specified in pixels as it would be rendered on a window with a height of 720 pixels. OSD and subtitles are always scaled with the window height, so specifying or expecting an absolute font size doesn't make sense. Such scaled pixel units are used to specify font border etc. as well. (Note: the font size is directly passed to libass. How the fonts are actually rasterized is outside of our control, but in theory ASS font sizes map to "script" pixels and then are scaled to screen size.) The default settings should be about the same, with slight difference due to rounding to the new scales. The OSD and subtitle fonts are not separately configurable. It has limited use and would double the number of newly added options, which would be more confusing than helpful. It could be easily added later, should the need arise. Other small details that change: - ASS_Style.Encoding is not set to -1 for subs anymore (assuming subs use VSFilter direction in -no-ass mode too) - use a different WrapStyle for OSD - ASS forced styles are not applied to OSD
2012-11-17 20:56:45 +01:00
sub: add --sub-text-* options to unstyled text subtitles font Before this commit, the --osd-* options (like --osd-font-size etc.) configured both the OSD and subtitle font. Make them separate, and add --sub-text-* options (like --sub-text-size etc.). Now --osd-* affects the OSD font only, and --sub-text-* unstyled text subtitles only.
2013-01-04 16:10:17 +01:00
*NOTE*: the ``--sub-text-font`` option (and most other ``--sub-text-``
options) are ignored when ASS-subtitles are rendered, unless the
``--no-ass`` option is specified.
--osd-font-size=<size>, --sub-text-font-size=<size>
Specify the OSD/sub font size. The unit is the size in scaled pixels at a
osd: make the OSD and sub font more customizable Make more aspects of the OSD font customizable. This also affects the font used for unstyled subtitles (such as SRT), or when using the --no-ass option. This adds back some customizability that was lost with commit 74e7a1 (osd: use libass for OSD rendering). Removed options: --ass-border-color --ass-color --font --subfont --subfont-text-scale Added options: --osd-color --osd-border --osd-back-color --osd-shadow-color --osd-font --osd-font-size --osd-border-size --osd-margin-x --osd-margin-y --osd-shadow-offset --osd-spacing --sub-scale The font size is now specified in pixels as it would be rendered on a window with a height of 720 pixels. OSD and subtitles are always scaled with the window height, so specifying or expecting an absolute font size doesn't make sense. Such scaled pixel units are used to specify font border etc. as well. (Note: the font size is directly passed to libass. How the fonts are actually rasterized is outside of our control, but in theory ASS font sizes map to "script" pixels and then are scaled to screen size.) The default settings should be about the same, with slight difference due to rounding to the new scales. The OSD and subtitle fonts are not separately configurable. It has limited use and would double the number of newly added options, which would be more confusing than helpful. It could be easily added later, should the need arise. Other small details that change: - ASS_Style.Encoding is not set to -1 for subs anymore (assuming subs use VSFilter direction in -no-ass mode too) - use a different WrapStyle for OSD - ASS forced styles are not applied to OSD
2012-11-17 20:56:45 +01:00
window height of 720. The actual pixel size is scaled with the window
height: if the window height is larger or smaller than 720, the actual size
of the text increases or decreases as well.
Default: 45.
manpage: sort --osd-* options They were more or less grouped by usefulness, but since everything else in the manpage is sorted alphabetically, it's better to be consistent and sort these options as well.
2013-01-04 16:04:08 +01:00
--osd-fractions
Show OSD times with fractions of seconds.
osd: make the OSD and sub font more customizable Make more aspects of the OSD font customizable. This also affects the font used for unstyled subtitles (such as SRT), or when using the --no-ass option. This adds back some customizability that was lost with commit 74e7a1 (osd: use libass for OSD rendering). Removed options: --ass-border-color --ass-color --font --subfont --subfont-text-scale Added options: --osd-color --osd-border --osd-back-color --osd-shadow-color --osd-font --osd-font-size --osd-border-size --osd-margin-x --osd-margin-y --osd-shadow-offset --osd-spacing --sub-scale The font size is now specified in pixels as it would be rendered on a window with a height of 720 pixels. OSD and subtitles are always scaled with the window height, so specifying or expecting an absolute font size doesn't make sense. Such scaled pixel units are used to specify font border etc. as well. (Note: the font size is directly passed to libass. How the fonts are actually rasterized is outside of our control, but in theory ASS font sizes map to "script" pixels and then are scaled to screen size.) The default settings should be about the same, with slight difference due to rounding to the new scales. The OSD and subtitle fonts are not separately configurable. It has limited use and would double the number of newly added options, which would be more confusing than helpful. It could be easily added later, should the need arise. Other small details that change: - ASS_Style.Encoding is not set to -1 for subs anymore (assuming subs use VSFilter direction in -no-ass mode too) - use a different WrapStyle for OSD - ASS forced styles are not applied to OSD
2012-11-17 20:56:45 +01:00
manpage: sort --osd-* options They were more or less grouped by usefulness, but since everything else in the manpage is sorted alphabetically, it's better to be consistent and sort these options as well.
2013-01-04 16:04:08 +01:00
--osd-level=<0-3>
Specifies which mode the OSD should start in.
:0: subtitles only
:1: volume + seek (default)
:2: volume + seek + timer + percentage
:3: volume + seek + timer + percentage + total time
osd: make the OSD and sub font more customizable Make more aspects of the OSD font customizable. This also affects the font used for unstyled subtitles (such as SRT), or when using the --no-ass option. This adds back some customizability that was lost with commit 74e7a1 (osd: use libass for OSD rendering). Removed options: --ass-border-color --ass-color --font --subfont --subfont-text-scale Added options: --osd-color --osd-border --osd-back-color --osd-shadow-color --osd-font --osd-font-size --osd-border-size --osd-margin-x --osd-margin-y --osd-shadow-offset --osd-spacing --sub-scale The font size is now specified in pixels as it would be rendered on a window with a height of 720 pixels. OSD and subtitles are always scaled with the window height, so specifying or expecting an absolute font size doesn't make sense. Such scaled pixel units are used to specify font border etc. as well. (Note: the font size is directly passed to libass. How the fonts are actually rasterized is outside of our control, but in theory ASS font sizes map to "script" pixels and then are scaled to screen size.) The default settings should be about the same, with slight difference due to rounding to the new scales. The OSD and subtitle fonts are not separately configurable. It has limited use and would double the number of newly added options, which would be more confusing than helpful. It could be easily added later, should the need arise. Other small details that change: - ASS_Style.Encoding is not set to -1 for subs anymore (assuming subs use VSFilter direction in -no-ass mode too) - use a different WrapStyle for OSD - ASS forced styles are not applied to OSD
2012-11-17 20:56:45 +01:00
sub: add --sub-text-* options to unstyled text subtitles font Before this commit, the --osd-* options (like --osd-font-size etc.) configured both the OSD and subtitle font. Make them separate, and add --sub-text-* options (like --sub-text-size etc.). Now --osd-* affects the OSD font only, and --sub-text-* unstyled text subtitles only.
2013-01-04 16:10:17 +01:00
--osd-margin-x=<size>, --sub-text-margin-x=<size>
Left and right screen margin for the OSD/subs in scaled pixels (see
osd: make the OSD and sub font more customizable Make more aspects of the OSD font customizable. This also affects the font used for unstyled subtitles (such as SRT), or when using the --no-ass option. This adds back some customizability that was lost with commit 74e7a1 (osd: use libass for OSD rendering). Removed options: --ass-border-color --ass-color --font --subfont --subfont-text-scale Added options: --osd-color --osd-border --osd-back-color --osd-shadow-color --osd-font --osd-font-size --osd-border-size --osd-margin-x --osd-margin-y --osd-shadow-offset --osd-spacing --sub-scale The font size is now specified in pixels as it would be rendered on a window with a height of 720 pixels. OSD and subtitles are always scaled with the window height, so specifying or expecting an absolute font size doesn't make sense. Such scaled pixel units are used to specify font border etc. as well. (Note: the font size is directly passed to libass. How the fonts are actually rasterized is outside of our control, but in theory ASS font sizes map to "script" pixels and then are scaled to screen size.) The default settings should be about the same, with slight difference due to rounding to the new scales. The OSD and subtitle fonts are not separately configurable. It has limited use and would double the number of newly added options, which would be more confusing than helpful. It could be easily added later, should the need arise. Other small details that change: - ASS_Style.Encoding is not set to -1 for subs anymore (assuming subs use VSFilter direction in -no-ass mode too) - use a different WrapStyle for OSD - ASS forced styles are not applied to OSD
2012-11-17 20:56:45 +01:00
``--osd-font-size`` for details).
This option specifies the distance of the OSD to the left, as well as at
which distance from the right border long OSD text will be broken.
Default: 25.
sub: add --sub-text-* options to unstyled text subtitles font Before this commit, the --osd-* options (like --osd-font-size etc.) configured both the OSD and subtitle font. Make them separate, and add --sub-text-* options (like --sub-text-size etc.). Now --osd-* affects the OSD font only, and --sub-text-* unstyled text subtitles only.
2013-01-04 16:10:17 +01:00
--osd-margin-y=<size>, --sub-text-margin-y=<size>
Top and bottom screen margin for the OSD/subs in scaled pixels (see
osd: make the OSD and sub font more customizable Make more aspects of the OSD font customizable. This also affects the font used for unstyled subtitles (such as SRT), or when using the --no-ass option. This adds back some customizability that was lost with commit 74e7a1 (osd: use libass for OSD rendering). Removed options: --ass-border-color --ass-color --font --subfont --subfont-text-scale Added options: --osd-color --osd-border --osd-back-color --osd-shadow-color --osd-font --osd-font-size --osd-border-size --osd-margin-x --osd-margin-y --osd-shadow-offset --osd-spacing --sub-scale The font size is now specified in pixels as it would be rendered on a window with a height of 720 pixels. OSD and subtitles are always scaled with the window height, so specifying or expecting an absolute font size doesn't make sense. Such scaled pixel units are used to specify font border etc. as well. (Note: the font size is directly passed to libass. How the fonts are actually rasterized is outside of our control, but in theory ASS font sizes map to "script" pixels and then are scaled to screen size.) The default settings should be about the same, with slight difference due to rounding to the new scales. The OSD and subtitle fonts are not separately configurable. It has limited use and would double the number of newly added options, which would be more confusing than helpful. It could be easily added later, should the need arise. Other small details that change: - ASS_Style.Encoding is not set to -1 for subs anymore (assuming subs use VSFilter direction in -no-ass mode too) - use a different WrapStyle for OSD - ASS forced styles are not applied to OSD
2012-11-17 20:56:45 +01:00
``--osd-font-size`` for details).
This option specifies the vertical margins of the OSD. This is also used
for unstyled text subtitles. If you just want to raise the vertical
subtitle position, use ``--sub-pos``.
Default: 10.
sub: add --sub-text-* options to unstyled text subtitles font Before this commit, the --osd-* options (like --osd-font-size etc.) configured both the OSD and subtitle font. Make them separate, and add --sub-text-* options (like --sub-text-size etc.). Now --osd-* affects the OSD font only, and --sub-text-* unstyled text subtitles only.
2013-01-04 16:10:17 +01:00
--osd-shadow-color=<#RRGGBB>, --sub-text-shadow-color=<#RRGGBB>
See ``--osd-color``. Color used for OSD/sub text shadow.
manpage: sort --osd-* options They were more or less grouped by usefulness, but since everything else in the manpage is sorted alphabetically, it's better to be consistent and sort these options as well.
2013-01-04 16:04:08 +01:00
sub: add --sub-text-* options to unstyled text subtitles font Before this commit, the --osd-* options (like --osd-font-size etc.) configured both the OSD and subtitle font. Make them separate, and add --sub-text-* options (like --sub-text-size etc.). Now --osd-* affects the OSD font only, and --sub-text-* unstyled text subtitles only.
2013-01-04 16:10:17 +01:00
--osd-shadow-offset=<size>, --sub-text-shadow-offset=<size>
Displacement of the OSD/sub text shadow in scaled pixels (see
osd: make the OSD and sub font more customizable Make more aspects of the OSD font customizable. This also affects the font used for unstyled subtitles (such as SRT), or when using the --no-ass option. This adds back some customizability that was lost with commit 74e7a1 (osd: use libass for OSD rendering). Removed options: --ass-border-color --ass-color --font --subfont --subfont-text-scale Added options: --osd-color --osd-border --osd-back-color --osd-shadow-color --osd-font --osd-font-size --osd-border-size --osd-margin-x --osd-margin-y --osd-shadow-offset --osd-spacing --sub-scale The font size is now specified in pixels as it would be rendered on a window with a height of 720 pixels. OSD and subtitles are always scaled with the window height, so specifying or expecting an absolute font size doesn't make sense. Such scaled pixel units are used to specify font border etc. as well. (Note: the font size is directly passed to libass. How the fonts are actually rasterized is outside of our control, but in theory ASS font sizes map to "script" pixels and then are scaled to screen size.) The default settings should be about the same, with slight difference due to rounding to the new scales. The OSD and subtitle fonts are not separately configurable. It has limited use and would double the number of newly added options, which would be more confusing than helpful. It could be easily added later, should the need arise. Other small details that change: - ASS_Style.Encoding is not set to -1 for subs anymore (assuming subs use VSFilter direction in -no-ass mode too) - use a different WrapStyle for OSD - ASS forced styles are not applied to OSD
2012-11-17 20:56:45 +01:00
``--osd-font-size`` for details). A value of 0 disables shadows.
Default: 0.
sub: add --sub-text-* options to unstyled text subtitles font Before this commit, the --osd-* options (like --osd-font-size etc.) configured both the OSD and subtitle font. Make them separate, and add --sub-text-* options (like --sub-text-size etc.). Now --osd-* affects the OSD font only, and --sub-text-* unstyled text subtitles only.
2013-01-04 16:10:17 +01:00
--osd-spacing=<size>, --sub-text-spacing=<size>
Horizontal OSD/sub font spacing in scaled pixels (see ``--osd-font-size``
for details). This value is added to the normal letter spacing. Negative
values are allowed.
osd: make the OSD and sub font more customizable Make more aspects of the OSD font customizable. This also affects the font used for unstyled subtitles (such as SRT), or when using the --no-ass option. This adds back some customizability that was lost with commit 74e7a1 (osd: use libass for OSD rendering). Removed options: --ass-border-color --ass-color --font --subfont --subfont-text-scale Added options: --osd-color --osd-border --osd-back-color --osd-shadow-color --osd-font --osd-font-size --osd-border-size --osd-margin-x --osd-margin-y --osd-shadow-offset --osd-spacing --sub-scale The font size is now specified in pixels as it would be rendered on a window with a height of 720 pixels. OSD and subtitles are always scaled with the window height, so specifying or expecting an absolute font size doesn't make sense. Such scaled pixel units are used to specify font border etc. as well. (Note: the font size is directly passed to libass. How the fonts are actually rasterized is outside of our control, but in theory ASS font sizes map to "script" pixels and then are scaled to screen size.) The default settings should be about the same, with slight difference due to rounding to the new scales. The OSD and subtitle fonts are not separately configurable. It has limited use and would double the number of newly added options, which would be more confusing than helpful. It could be easily added later, should the need arise. Other small details that change: - ASS_Style.Encoding is not set to -1 for subs anymore (assuming subs use VSFilter direction in -no-ass mode too) - use a different WrapStyle for OSD - ASS forced styles are not applied to OSD
2012-11-17 20:56:45 +01:00
Default: 0.
osd: add --osd-status-msg option for custom OSD status
2013-02-16 22:14:33 +01:00
--osd-status-msg=<string>
Show a custom string during playback instead of the standard status text.
This overrides the status text used for ``--osd-level=3``, when using the
``show_progress`` command (by default mapped to ``P``), or in some
non-default cases when seeking. Expands properties. See ``--playing-msg``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--overlapsub
Allows the next subtitle to be displayed while the current one is still
manpage: various fixes
2012-11-15 14:25:20 +01:00
visible (default is to enable the support only for specific formats). This
only matters for subtitles loaded with ``-sub``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--panscan=<0.0-1.0>
Enables pan-and-scan functionality (cropping the sides of e.g. a 16:9
movie to make it fit a 4:3 display without black bands). The range
controls how much of the image is cropped. May not work with all video
output drivers.
--panscanrange=<-19.0-99.0>
(experimental)
Change the range of the pan-and-scan functionality (default: 1). Positive
values mean multiples of the default range. Negative numbers mean you can
zoom in up to a factor of ``--panscanrange=+1``. E.g. ``--panscanrange=-3``
allows a zoom factor of up to 4. This feature is experimental. Do not
manpage: cleanup Removing text about things that have been removed from the code long ago, other fixes.
2012-10-24 01:06:00 +02:00
report bugs unless you are using ``--vo=opengl``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--passwd=<password>
Used with some network protocols. Specify password for HTTP authentication.
See also ``--user``.
manpage: mark HTTP related options as deprecated/broken Commit c02f25 switched the "http://" protocol to use ffmpeg's HTTP implementation (stream_lavf.c), instead of the mplayer internal one (http.c). Unfortunately, it turns out that there are some network related options that are not respected by stream_lavf.c, and consequently do not work anymore for "http://" URLs. This might be fixed later. Mark them as deprecated for now, as it might take arbitrarily long until this is taken care of.
2012-12-11 01:04:13 +01:00
*WARNING*: works with the deprecated ``mp_http://`` protocol only.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--playing-msg=<string>
core: output --playing-msg message only after at least one frame is shown This way it's possible to retrieve correct information about video, like actual width/height, which in general are available only after at least one frame has been sent to the video output, such as dwidth/dheight. mpv_identify.sh becomes a bit slower, because we let it decode enough audio and video to fill the audio buffers and to send one frame to the video output. Also, --playing-msg isn't shown anymore with --frames=0 (could be fixed by special-casing it, should this break any use cases). Note that in some corner cases, like when the demuxer for some reason returns lots of audio packets but no video packets at the start, but video actually starts later, the --playing-msg will still be output before video starts.
2013-03-25 23:44:32 +01:00
Print out a string after starting playback. The string is expanded for
options: parse C-style escapes for some options Being able to insert newline characters ("\n") is useful for --osd-status-msg, and possibly also for anything that prints to the terminal. Espcially --term-osd-esc looks relatively useless without being able to specify escapes. Maybe parsing escapes should happen during command line / config parsing instead (for all options).
2013-02-16 23:24:10 +01:00
properties, e.g. ``--playing-msg=file: ${filename}`` will print the string
DOCS: Fix some rst error messages Unfortunately, these do not fix the man page indent issue.
2012-11-29 17:03:48 +01:00
``file:`` followed by a space and the currently played filename.
manpage: document input.conf related things This directly corresponds to DOCS/OUTDATED-tech/slave.txt. Changes from the recent commits are included too.
2012-09-27 03:20:12 +02:00
The following expansions are supported:
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
DOCS: Fix some rst error messages Unfortunately, these do not fix the man page indent issue.
2012-11-29 17:03:48 +01:00
\${NAME}
manpage: document input.conf related things This directly corresponds to DOCS/OUTDATED-tech/slave.txt. Changes from the recent commits are included too.
2012-09-27 03:20:12 +02:00
Expands to the value of the property ``NAME``. If ``NAME`` starts with
``=``, use the raw value of the property. If retrieving the property
options: parse C-style escapes for some options Being able to insert newline characters ("\n") is useful for --osd-status-msg, and possibly also for anything that prints to the terminal. Espcially --term-osd-esc looks relatively useless without being able to specify escapes. Maybe parsing escapes should happen during command line / config parsing instead (for all options).
2013-02-16 23:24:10 +01:00
fails, expand to an error string. (Use ``${NAME:}`` with a trailing
manpage: document input.conf related things This directly corresponds to DOCS/OUTDATED-tech/slave.txt. Changes from the recent commits are included too.
2012-09-27 03:20:12 +02:00
``:`` to expand to an empty string instead.)
DOCS: Fix some rst error messages Unfortunately, these do not fix the man page indent issue.
2012-11-29 17:03:48 +01:00
\${NAME:STR}
manpage: document input.conf related things This directly corresponds to DOCS/OUTDATED-tech/slave.txt. Changes from the recent commits are included too.
2012-09-27 03:20:12 +02:00
Expands to the value of the property ``NAME``, or ``STR`` if the
property can't be retrieved. ``STR`` is expanded recursively.
DOCS: Fix some rst error messages Unfortunately, these do not fix the man page indent issue.
2012-11-29 17:03:48 +01:00
\${!NAME:STR}
manpage: document input.conf related things This directly corresponds to DOCS/OUTDATED-tech/slave.txt. Changes from the recent commits are included too.
2012-09-27 03:20:12 +02:00
Expands to ``STR`` (recursively) if the property ``NAME`` can't be
retrieved.
DOCS: Fix some rst error messages Unfortunately, these do not fix the man page indent issue.
2012-11-29 17:03:48 +01:00
\${?NAME:STR}
manpage: document input.conf related things This directly corresponds to DOCS/OUTDATED-tech/slave.txt. Changes from the recent commits are included too.
2012-09-27 03:20:12 +02:00
Expands to ``STR`` (recursively) if the property ``NAME`` is available.
DOCS: Fix some rst error messages Unfortunately, these do not fix the man page indent issue.
2012-11-29 17:03:48 +01:00
\$\$
options: parse C-style escapes for some options Being able to insert newline characters ("\n") is useful for --osd-status-msg, and possibly also for anything that prints to the terminal. Espcially --term-osd-esc looks relatively useless without being able to specify escapes. Maybe parsing escapes should happen during command line / config parsing instead (for all options).
2013-02-16 23:24:10 +01:00
Expands to ``$``.
DOCS: Fix some rst error messages Unfortunately, these do not fix the man page indent issue.
2012-11-29 17:03:48 +01:00
\$}
manpage: cleanup Removing text about things that have been removed from the code long ago, other fixes.
2012-10-24 01:06:00 +02:00
Expands to ``}``. (To produce this character inside recursive
manpage: document input.conf related things This directly corresponds to DOCS/OUTDATED-tech/slave.txt. Changes from the recent commits are included too.
2012-09-27 03:20:12 +02:00
expansion.)
DOCS: Fix some rst error messages Unfortunately, these do not fix the man page indent issue.
2012-11-29 17:03:48 +01:00
\$>
options: parse C-style escapes for some options Being able to insert newline characters ("\n") is useful for --osd-status-msg, and possibly also for anything that prints to the terminal. Espcially --term-osd-esc looks relatively useless without being able to specify escapes. Maybe parsing escapes should happen during command line / config parsing instead (for all options).
2013-02-16 23:24:10 +01:00
Disable property expansion and special handling of ``$`` for the rest
manpage: document input.conf related things This directly corresponds to DOCS/OUTDATED-tech/slave.txt. Changes from the recent commits are included too.
2012-09-27 03:20:12 +02:00
of the string.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
options: parse C-style escapes for some options Being able to insert newline characters ("\n") is useful for --osd-status-msg, and possibly also for anything that prints to the terminal. Espcially --term-osd-esc looks relatively useless without being able to specify escapes. Maybe parsing escapes should happen during command line / config parsing instead (for all options).
2013-02-16 23:24:10 +01:00
This option also parses C-style escapes. Example:
- ``\n`` becomes a newline character
- ``\\`` expands to ``\``
options: add --status-msg Replaces the status line with a custom string. This is probably useful for hacking old slave mode applications into working again. Even if not, this might be generally useful.
2012-10-02 03:12:09 +02:00
--status-msg=<string>
Print out a custom string during playback instead of the standard status
line. Expands properties. See ``--playing-msg``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--playlist=<filename>
Play files according to a playlist file (ASX, Winamp, SMIL, or
one-file-per-line format).
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
*WARNING*: The way mpv parses and uses playlist files is not safe
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
against maliciously constructed files. Such files may trigger harmful
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
actions. This has been the case for all mpv and MPlayer versions, but
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
unfortunately this fact was not well documented earlier, and some people
have even misguidedly recommended use of ``--playlist`` with untrusted
sources. Do NOT use ``--playlist`` with random internet sources or files
you don't trust!
FIXME: This needs to be clarified and documented thoroughly.
--pp=<quality>
manpage: cleanup Removing text about things that have been removed from the code long ago, other fixes.
2012-10-24 01:06:00 +02:00
See also ``--vf=pp``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--pphelp
See also ``--vf=pp``.
--prefer-ipv4
Use IPv4 on network connections. Falls back on IPv6 automatically.
manpage: mark HTTP related options as deprecated/broken Commit c02f25 switched the "http://" protocol to use ffmpeg's HTTP implementation (stream_lavf.c), instead of the mplayer internal one (http.c). Unfortunately, it turns out that there are some network related options that are not respected by stream_lavf.c, and consequently do not work anymore for "http://" URLs. This might be fixed later. Mark them as deprecated for now, as it might take arbitrarily long until this is taken care of.
2012-12-11 01:04:13 +01:00
*WARNING*: works with the deprecated ``mp_http://`` protocol only.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--prefer-ipv6
Use IPv6 on network connections. Falls back on IPv4 automatically.
manpage: mark HTTP related options as deprecated/broken Commit c02f25 switched the "http://" protocol to use ffmpeg's HTTP implementation (stream_lavf.c), instead of the mplayer internal one (http.c). Unfortunately, it turns out that there are some network related options that are not respected by stream_lavf.c, and consequently do not work anymore for "http://" URLs. This might be fixed later. Mark them as deprecated for now, as it might take arbitrarily long until this is taken care of.
2012-12-11 01:04:13 +01:00
*WARNING*: works with the deprecated ``mp_http://`` protocol only.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--priority=<prio>
(Windows only.)
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
Set process priority for mpv according to the predefined priorities
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
available under Windows.
Possible values of <prio>:
idle|belownormal|normal|abovenormal|high|realtime
*WARNING*: Using realtime priority can cause system lockup.
--profile=<profile1,profile2,...>
Use the given profile(s), ``--profile=help`` displays a list of the
defined profiles.
--pts-association-mode=<auto|decode|sort>
Select the method used to determine which container packet timestamp
corresponds to a particular output frame from the video decoder. Normally
you shouldn't need to change this option.
:auto: Try to pick a working mode from the ones below automatically
(default)
:decoder: Use decoder reordering functionality.
:sort: Maintain a buffer of unused pts values and use the lowest value
for the frame.
--pvr=<option1:option2:...>
This option tunes various encoding properties of the PVR capture module.
It has to be used with any hardware MPEG encoder based card supported by
the V4L2 driver. The Hauppauge WinTV PVR-150/250/350/500 and all IVTV
based cards are known as PVR capture cards. Be aware that only Linux
2.6.18 kernel and above is able to handle MPEG stream through V4L2 layer.
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
For hardware capture of an MPEG stream and watching it with mpv, use
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
``pvr://`` as a movie URL.
Available options are:
aspect=<0-3>
Specify input aspect ratio:
:0: 1:1
:1: 4:3 (default)
:2: 16:9
:3: 2.21:1
arate=<32000-48000>
Specify encoding audio rate (default: 48000 Hz, available: 32000,
44100 and 48000 Hz).
alayer=<1-3>
Specify MPEG audio layer encoding (default: 2).
abitrate=<32-448>
Specify audio encoding bitrate in kbps (default: 384).
amode=<value>
Specify audio encoding mode. Available preset values are 'stereo',
'joint_stereo', 'dual' and 'mono' (default: stereo).
vbitrate=<value>
Specify average video bitrate encoding in Mbps (default: 6).
vmode=<value>
Specify video encoding mode:
:vbr: Variable BitRate (default)
:cbr: Constant BitRate
vpeak=<value>
Specify peak video bitrate encoding in Mbps (only useful for VBR
encoding, default: 9.6).
fmt=<value>
Choose an MPEG format for encoding:
:ps: MPEG-2 Program Stream (default)
:ts: MPEG-2 Transport Stream
:mpeg1: MPEG-1 System Stream
:vcd: Video CD compatible stream
:svcd: Super Video CD compatible stream
:dvd: DVD compatible stream
--quiet
Make console output less verbose; in particular, prevents the status line
manpage: update example of the status line
2012-08-22 21:04:19 +02:00
(i.e. AV: 3.4 (00:00:03.37) / 5320.6 ...) from being displayed.
Particularly useful on slow terminals or broken ones which do not properly
handle carriage return (i.e. \\r).
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
manpage: fixes Add missing documentation for --quvi-format switch. Fix description how hw decoding is enabled. The old way currently still works, but is deprecated.
2013-01-31 00:39:45 +01:00
--quvi-format=<best|default|...>
Video format/quality that is directly passed to libquvi (default: ``best``).
This is used when opening links to streaming sites like YouTube. The
interpretation of this value is highly specific to the streaming site and
the video. The only well defined values that work on all sites are ``best``
(best quality/highest bandwidth, default), and ``default`` (lowest quality).
The quvi command line tool can be used to find out which formats are
supported for a given URL: ``quvi --query-formats URL``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--radio=<option1:option2:...>
These options set various parameters of the radio capture module. For
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
listening to radio with mpv use ``radio://<frequency>`` (if channels
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
option is not given) or ``radio://<channel_number>`` (if channels option
is given) as a movie URL. You can see allowed frequency range by running
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
mpv with ``-v``. To start the grabbing subsystem, use
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
``radio://<frequency or channel>/capture``. If the capture keyword is not
given you can listen to radio using the line-in cable only. Using capture
to listen is not recommended due to synchronization problems, which makes
this process uncomfortable.
Available options are:
device=<value>
Radio device to use (default: ``/dev/radio0`` for Linux and
``/dev/tuner0`` for \*BSD).
driver=<value>
Radio driver to use (default: v4l2 if available, otherwise v4l).
Currently, v4l and v4l2 drivers are supported.
volume=<0..100>
sound volume for radio device (default 100)
channels=<frequency>-<name>,<frequency>-<name>,...
Set channel list. Use _ for spaces in names (or play with quoting ;-).
The channel names will then be written using OSD and the slave
commands radio_step_channel and radio_set_channel will be usable for a
remote control (see LIRC). If given, number in movie URL will be
treated as channel position in channel list.
*EXAMPLE*: ``radio://1``, ``radio://104.4``, ``radio_set_channel 1``
adevice=<value> (radio capture only)
Name of device to capture sound from. Without such a name capture will
be disabled, even if the capture keyword appears in the URL. For ALSA
devices use it in the form ``hw=<card>.<device>``. If the device name
contains a '=', the module will use ALSA to capture, otherwise OSS.
arate=<value> (radio capture only)
Rate in samples per second (default: 44100).
*NOTE*: When using audio capture set also ``--rawaudio=rate=<value>``
option with the same value as arate. If you have problems with sound
speed (runs too quickly), try to play with different rate values (e.g.
48000, 44100, 32000,...).
achannels=<value> (radio capture only)
Number of audio channels to capture.
--rawaudio=<option1:option2:...>
This option lets you play raw audio files. You have to use
``--demuxer=rawaudio`` as well. It may also be used to play audio CDs
rawaudio: use mplayer audio format for format option The rawaudio demuxer had a rather hard to use way to set the audio format with the --rawaudio=format=value option. The user had to pass a numeric value, which then was set as wFormatTag member in the WAVEFORMATEX header. Make it use the mplayer audio format (the same as --af=format=value). Add a new internal pseudo audio codec tag, which is hopefully unused, which makes ad_pcm use the value in wFormatTag as internal mplayer audio format. Playing non-PCM formats is disabled. (At least AC3 can be played directly.)
2012-09-02 20:13:12 +02:00
which are not 44kHz 16-bit stereo.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Available options are:
:channels=<value>: number of channels
:rate=<value>: rate in samples per second
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
:format=<value>: mpv audio format (e.g. s16le)
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--rawvideo=<option1:option2:...>
This option lets you play raw video files. You have to use
``--demuxer=rawvideo`` as well.
Available options are:
:fps=<value>: rate in frames per second (default: 25.0)
:w=<value>: image width in pixels
:h=<value>: image height in pixels
:format=<value>: colorspace (fourcc) in hex or string
video: decouple internal pixel formats from FourCCs mplayer's video chain traditionally used FourCCs for pixel formats. For example, it used IMGFMT_YV12 for 4:2:0 YUV, which was defined to the string 'YV12' interpreted as unsigned int. Additionally, it used to encode information into the numeric values of some formats. The RGB formats had their bit depth and endian encoded into the least significant byte. Extended planar formats (420P10 etc.) had chroma shift, endian, and component bit depth encoded. (This has been removed in recent commits.) Replace the FourCC mess with a simple enum. Remove all the redundant formats like YV12/I420/IYUV. Replace some image format names by something more intuitive, most importantly IMGFMT_YV12 -> IMGFMT_420P. Add img_fourcc.h, which contains the old IDs for code that actually uses FourCCs. Change the way demuxers, that output raw video, identify the video format: they set either MP_FOURCC_RAWVIDEO or MP_FOURCC_IMGFMT to request the rawvideo decoder, and sh_video->imgfmt specifies the pixel format. Like the previous hack, this is supposed to avoid the need for a complete codecs.cfg entry per format, or other lookup tables. (Note that the RGB raw video FourCCs mostly rely on ffmpeg's mappings for NUT raw video, but this is still considered better than adding a raw video decoder - even if trivial, it would be full of annoying lookup tables.) The TV code has not been tested. Some corrective changes regarding endian and other image format flags creep in.
2012-12-23 20:03:30 +01:00
constant.
:mp-format=<value>: colorspace by internal video format
Use ``--rawvideo=mp-format=help``
for a list of possible formats.
demux_rawvideo: allow setting video codec Can be used to decode some obscure image formats and similar stuff.
2013-02-24 16:46:35 +01:00
:codec: set the video codec (instead of selecting
the rawvideo codec)
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
:size=<value>: frame size in Bytes
*EXAMPLE*:
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
- ``mpv foreman.qcif --demuxer=rawvideo --rawvideo=qcif`` Play the
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
famous "foreman" sample video.
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
- ``mpv sample-720x576.yuv --demuxer=rawvideo --rawvideo=w=720:h=576``
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Play a raw YUV sample.
--really-quiet
Display even less output and status messages than with ``--quiet``.
--referrer=<string>
Specify a referrer path or URL for HTTP requests.
--reuse-socket
(udp:// only)
Allows a socket to be reused by other processes as soon as it is closed.
--saturation=<-100-100>
Adjust the saturation of the video signal (default: 0). You can get
grayscale output with this option. Not supported by all video output
drivers.
--sb=<n>
Seek to byte position. Useful for playback from CD-ROM images or VOB files
options: rename -ss and -endpos, allow relative times Rename the -ss option to -start, and -endpos to -length. Add a -end option. The -end option always specifies an absolute end time, as opposed to -endpos/-length. All these options (--start, --end, --length) now accept relative times. Percent positions (e.g. "--start=30%") are interpreted as fractions of the file duration. Negative times (e.g. "--start=-1:00) are interpreted relative to the end of the file. Chapters (e.g. "--start=#3") yield the chapter's time position. The chapter support might be able to replace --chapter completely, but for now I am not sure how well this works out with e.g. DVDs and BDs, and a separate --chapter option is useful interface-wise.
2012-11-15 18:49:17 +01:00
with junk at the beginning. See also ``--start``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
core: add fs-screen option for fullscreen display selection `--fs-screen` allows to decide what display to go fullscreen into. The semantics of `--screen` changed and now it is only used to select the windowed display when starting the application. This is useful for people using mpv with an external TV. They will start windowed on their laptop's screen and switch to fullscreen on the TV. @wm4 worked on the x11 and w32 parts of the code. All is squashed in one commit for history clarity.
2013-02-17 16:35:44 +01:00
--screen=<default|0-32>
In multi-monitor configurations (i.e. a single desktop that spans across
multiple displays) this option tells mpv which screen to display the
movie on.
This option doesn't always work. In these cases, try to use ``--geometry``
to position the window explicitly.
*NOTE (X11)*: this option does not work properly with all window managers.
See also ``--fs-screen``.
image_writer: rename "filetype" option to "format" Although slightly less precise, this sounds less clunky. This change also causes the --screenshot-filetype option to be renamed to --screenshot-format.
2012-08-06 19:05:32 +02:00
--screenshot-format=<type>
man: update documentation related to screenshots
2012-08-02 20:44:28 +02:00
Set the image file type used for saving screenshots.
Available choices:
manpage: update the list of available screenshot formats Also update the default value of --screenshot-jpeg-quality
2012-08-23 08:02:08 +02:00
:png: PNG
:ppm: PPM
:pgm: PGM
:pgmyuv: PGM with YV12 pixel format
:tga: TARGA
:jpg: JPEG (default)
man: update documentation related to screenshots
2012-08-02 20:44:28 +02:00
:jpeg: JPEG (same as jpg, but with .jpeg file ending)
--screenshot-jpeg-quality=<0-100>
manpage: update the list of available screenshot formats Also update the default value of --screenshot-jpeg-quality
2012-08-23 08:02:08 +02:00
Set the JPEG quality level. Higher means better quality. The default is 90.
man: update documentation related to screenshots
2012-08-02 20:44:28 +02:00
--screenshot-png-compression=<0-9>
Set the PNG compression level. Higher means better compression. This will
affect the file size of the written screenshot file, and the time it takes
to write a screenshot. Too high compression might occupy enough CPU time to
interrupt playback. The default is 7.
--screenshot-template=<template>
Specify the filename template used to save screenshots. The template
specifies the filename without file extension, and can contain format
specifiers, which will be substituted when taking a screeshot.
By default the template is ``shot%n``, which results in filenames like
``shot0012.png`` for example.
The template can start with a relative or absolute path, in order to
specify a directory location where screenshots should be saved.
If the final screenshot filename points to an already existing file, the
file won't be overwritten. The screenshot will either not be saved, or if
the template contains ``%n``, saved using different, newly generated
filename.
Allowed format specifiers:
manpage: --screenshot-template: update %n, add %{prop} Explanation of %{prop} taken from the commit message of commit 12c44610ad6963bb58c01cc4415cc7befef386e1 (screenshot: make screenshot filenames configurable).
2012-08-23 09:03:03 +02:00
``%[#][0X]n``
A sequence number, padded with zeros to length X (default: 04). E.g.
passing the format ``%04n`` will yield ``0012`` on the 12th screenshot.
The number is incremented every time a screenshot is taken, or if the
file already exists. The length ``X`` must be in the range 0-9. With
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
the optional # sign mpv will use the lowest available number. For
manpage: --screenshot-template: update %n, add %{prop} Explanation of %{prop} taken from the commit message of commit 12c44610ad6963bb58c01cc4415cc7befef386e1 (screenshot: make screenshot filenames configurable).
2012-08-23 09:03:03 +02:00
example, if you take three screenshots--0001, 0002, 0003--and delete
the first two, the next two screenshots won't be 0004 and 0005, but
0001 and 0002 again.
man: update documentation related to screenshots
2012-08-02 20:44:28 +02:00
``%f``
Filename of the currently played video.
``%F``
Same as ``%f``, but strip the file extension, including the dot.
``%p``
Current playback time, in the same format as used in the OSD. The
result is a string of the form "HH:MM:SS". For example, if the video is
at the time position 5 minutes and 34 seconds, ``%p`` will be replaced
with "00:05:34".
``%P``
Similar to ``%p``, but extended with the playback time in milliseconds.
It is formatted as "HH:MM:SS.mmm", with "mmm" being the millisecond
part of the playback time. (Note that this is a simple way for getting
unique per-frame timestamps. Frame numbers would be more intuitive, but
are not easily implementable, because container formats usually use
time stamps for identifying frames.)
``%tX``
manpage: --screenshot-template: update %n, add %{prop} Explanation of %{prop} taken from the commit message of commit 12c44610ad6963bb58c01cc4415cc7befef386e1 (screenshot: make screenshot filenames configurable).
2012-08-23 09:03:03 +02:00
Specify the current local date/time using the format ``X``. This format
man: update documentation related to screenshots
2012-08-02 20:44:28 +02:00
specifier uses the UNIX ``strftime()`` function internally, and inserts
the result of passing "%X" to ``strftime``. For example, ``%tm`` will
insert the number of the current month as number. You have to use
multiple ``%tX`` specifiers to build a full date/time string.
manpage: --screenshot-template: update %n, add %{prop} Explanation of %{prop} taken from the commit message of commit 12c44610ad6963bb58c01cc4415cc7befef386e1 (screenshot: make screenshot filenames configurable).
2012-08-23 09:03:03 +02:00
``%{prop[:fallback text]}``
manpage: cleanup Removing text about things that have been removed from the code long ago, other fixes.
2012-10-24 01:06:00 +02:00
Insert the value of the slave property 'prop'. E.g. ``%{filename}`` is
the same as ``%f``. If the property doesn't exist or is not available,
an error text is inserted, unless a fallback is specified.
man: update documentation related to screenshots
2012-08-02 20:44:28 +02:00
``%%``
Replaced with the ``%`` character itself.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--screenh=<pixels>
Specify the screen height for video output drivers which do not know the
manpage: don't mention nonexistent VOs, command line switches, etc. Very likely doesn't remove all outdated things.
2012-08-22 15:47:02 +02:00
screen resolution, like x11 and TV-out.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--screenw=<pixels>
Specify the screen width for video output drivers which do not know the
manpage: don't mention nonexistent VOs, command line switches, etc. Very likely doesn't remove all outdated things.
2012-08-22 15:47:02 +02:00
screen resolution, like x11 and TV-out.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--show-profile=<profile>
Show the description and content of a profile.
--shuffle
Play files in random order.
options: accept "yes" and "no" only for flags This removes the alternative values like "off", "0", "false" etc., and also the non-English versions of these. This is done for general consistency. It's better to have a single way of doing things when multiple ways don't add singificant value. Also update some choices for consistency.
2012-09-18 15:50:24 +02:00
--sid=<ID|auto|no>
options: change --vid, --aid, --sid options The --vid, --aid, --sid options now accept the values 'off' and 'auto', instead of having the user deal with the numeric values -2 and -1. The numeric values are not allowed anymore. Remove the --audio option. It was probably meant as compensation option for --no-audio. There are no such options for sub/video, and it was not documented, so just remove it. The replacement is "--aid=auto". Also do some updates to the manpage.
2012-09-05 02:39:12 +02:00
Display the subtitle stream specified by <ID> (0-31). ``auto`` selects the
options: accept "yes" and "no" only for flags This removes the alternative values like "off", "0", "false" etc., and also the non-English versions of these. This is done for general consistency. It's better to have a single way of doing things when multiple ways don't add singificant value. Also update some choices for consistency.
2012-09-18 15:50:24 +02:00
default, ``no`` disables subtitles.
sub: remove vobsub reader in favor of ffmpeg vobsub demuxer ffmpeg recently added a demuxer that can read vobsubs (pairs of .sub and .idx files). Get rid of the internal vobsub reader, and use the ffmpeg demuxer instead. Sneak in an unrelated manpage change (autosub default).
2012-12-08 13:59:49 +01:00
See also ``--slang``, ``--no-sub``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--slang=<languagecode[,languagecode,...]>
Specify a priority list of subtitle languages to use. Different container
formats employ different language codes. DVDs use ISO 639-1 two letter
language codes, Matroska uses ISO 639-2 three letter language codes while
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
OGM uses a free-form identifier. mpv prints the available languages
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
when run in verbose (``-v``) mode. See also ``--sid``.
*EXAMPLE*:
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
- ``mpv dvd://1 --slang=hu,en`` chooses the Hungarian subtitle track on
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
a DVD and falls back on English if Hungarian is not available.
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
- ``mpv --slang=jpn example.mkv`` plays a Matroska file with Japanese
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
subtitles.
core: intentionally cripple slave mode Rename -slave to -slave-broken to prevent slave mode applications from working. Do this to prevent horrible user experiences, in case someone should attempt to try this version of mplayer with smplayer and others. This also makes it clear that we don't intend to keep slave mode compatibility, because the slave mode protocol is horrible and bad. See the changes in options.rst for further reasons and comments.
2012-08-15 22:21:17 +02:00
--slave-broken
Switches on the old slave mode. This is for testing only, and incompatible
to the removed --slave switch.
*NOTE*: Changes incompatible to slave mode applications have been made. In
particular, the status line output was changed, which is used by some
applications to determine the current playback position. This switch has
been renamed to prevent these applications from working with this version
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
of mpv, because it would lead to buggy and confusing behavior only.
core: intentionally cripple slave mode Rename -slave to -slave-broken to prevent slave mode applications from working. Do this to prevent horrible user experiences, in case someone should attempt to try this version of mplayer with smplayer and others. This also makes it clear that we don't intend to keep slave mode compatibility, because the slave mode protocol is horrible and bad. See the changes in options.rst for further reasons and comments.
2012-08-15 22:21:17 +02:00
Moreover, the slave mode protocol is so horribly bad that it should not be
used for new programs, nor should existing programs attempt to adapt to the
changed output and use the --slave-broken switch. Instead, a new, saner
protocol should be developed (and will, if there is enough interest).
manpage: fix various typos
2012-08-22 15:45:34 +02:00
This affects smplayer, smplayer2, mplayerosx, and others.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--softsleep
Time frames by repeatedly checking the current time instead of asking
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
the kernel to wake up mpv at the correct time. Useful if your kernel
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
timing is imprecise and you cannot use the RTC either. Comes at the
price of higher CPU consumption.
softvol, ao_pulse: prefer ao_pulse volume control by default --softvol is enabled by default. For most audio outputs, this is a good thing, as they have either their own (bad) soft volume implementation, or control the system mixer. With ao_pulse, the situation is a bit different: it supports per-application volume (i.e. volume control is not really global). More importantly, ao_pulse uses a rather large audio buffer, and changing the volume with mplayer's volume filter has a large delay. With the native ao_pulse volume control, it's instant, because PulseAudio's audio filtering happens at a later stage in its processing pipeline (inaccessible for mplayer). This means native volume control should really be allowed for ao_pulse, while it's the reverse for other audio outputs. Make --softvol a choice option, and add a new "auto" choice. This is default and will use PA's volume control with ao_pulse, and mplayer's volume filter otherwise (i.e. the old softvol behavior).
2012-09-18 21:41:22 +02:00
--softvol=<mode>
Control whether to use the volume controls of the audio output driver, or
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
the internal mpv volume filter.
softvol, ao_pulse: prefer ao_pulse volume control by default --softvol is enabled by default. For most audio outputs, this is a good thing, as they have either their own (bad) soft volume implementation, or control the system mixer. With ao_pulse, the situation is a bit different: it supports per-application volume (i.e. volume control is not really global). More importantly, ao_pulse uses a rather large audio buffer, and changing the volume with mplayer's volume filter has a large delay. With the native ao_pulse volume control, it's instant, because PulseAudio's audio filtering happens at a later stage in its processing pipeline (inaccessible for mplayer). This means native volume control should really be allowed for ao_pulse, while it's the reverse for other audio outputs. Make --softvol a choice option, and add a new "auto" choice. This is default and will use PA's volume control with ao_pulse, and mplayer's volume filter otherwise (i.e. the old softvol behavior).
2012-09-18 21:41:22 +02:00
:no: prefer audio driver controls, use the volume filter only if
absolutely needed
:yes: always use the volume filter
:auto: prefer the volume filter if the audio driver uses the system mixer (default)
manpage: cleanup Removing text about things that have been removed from the code long ago, other fixes.
2012-10-24 01:06:00 +02:00
The intention of ``auto`` is to avoid changing system mixer settings from
within mpv with default settings. mpv is a video player, not a mixer panel.
On the other hand, mixer controls are enabled for sound servers like
PulseAudio, which provide per-application volume.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--softvol-max=<10.0-10000.0>
manpage: update default value of --softvol-max
2012-08-23 09:36:29 +02:00
Set the maximum amplification level in percent (default: 200). A value of
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
200 will allow you to adjust the volume up to a maximum of double the
current level. With values below 100 the initial volume (which is 100%)
will be above the maximum, which e.g. the OSD cannot display correctly.
--speed=<0.01-100>
Slow down or speed up playback by the factor given as parameter.
--srate=<Hz>
Select the output sample rate to be used (of course sound cards have
limits on this). If the sample frequency selected is different from that
of the current media, the resample or lavcresample audio filter will be
inserted into the audio filter layer to compensate for the difference. The
type of resampling can be controlled by the ``--af-adv`` option.
options: rename -ss and -endpos, allow relative times Rename the -ss option to -start, and -endpos to -length. Add a -end option. The -end option always specifies an absolute end time, as opposed to -endpos/-length. All these options (--start, --end, --length) now accept relative times. Percent positions (e.g. "--start=30%") are interpreted as fractions of the file duration. Negative times (e.g. "--start=-1:00) are interpreted relative to the end of the file. Chapters (e.g. "--start=#3") yield the chapter's time position. The chapter support might be able to replace --chapter completely, but for now I am not sure how well this works out with e.g. DVDs and BDs, and a separate --chapter option is useful interface-wise.
2012-11-15 18:49:17 +01:00
--start=<relative time>
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Seek to given time position.
options: rename -ss and -endpos, allow relative times Rename the -ss option to -start, and -endpos to -length. Add a -end option. The -end option always specifies an absolute end time, as opposed to -endpos/-length. All these options (--start, --end, --length) now accept relative times. Percent positions (e.g. "--start=30%") are interpreted as fractions of the file duration. Negative times (e.g. "--start=-1:00) are interpreted relative to the end of the file. Chapters (e.g. "--start=#3") yield the chapter's time position. The chapter support might be able to replace --chapter completely, but for now I am not sure how well this works out with e.g. DVDs and BDs, and a separate --chapter option is useful interface-wise.
2012-11-15 18:49:17 +01:00
The general format for absolute times is ``[[hh:]mm:]ss[.ms]``. If the time
is negated with ``-``, the seek is relative from the end of the file.
options: support chapters for --start and --end The --start and --end switch now accept a chapter number. The chapter number is prefixed with '#', e.g. "--start=#2" jumps to chapter 2. The chapter support might be able to replace --chapter completely, but for now I am not sure how well this works out with e.g. DVDs and BDs, and a separate --chapter option is useful interface-wise. (This was supposed to be added in 51503a, but apparently the fixup commit adding it was lost in a rebase. This might also be the reason for the mess-up fixed in 394285.)
2012-11-18 18:02:14 +01:00
``pp%`` seeks to percent position pp (0-100).
``#c`` seeks to chapter number c. (Chapters start from 1.)
options: rename -ss and -endpos, allow relative times Rename the -ss option to -start, and -endpos to -length. Add a -end option. The -end option always specifies an absolute end time, as opposed to -endpos/-length. All these options (--start, --end, --length) now accept relative times. Percent positions (e.g. "--start=30%") are interpreted as fractions of the file duration. Negative times (e.g. "--start=-1:00) are interpreted relative to the end of the file. Chapters (e.g. "--start=#3") yield the chapter's time position. The chapter support might be able to replace --chapter completely, but for now I am not sure how well this works out with e.g. DVDs and BDs, and a separate --chapter option is useful interface-wise.
2012-11-15 18:49:17 +01:00
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
*EXAMPLE*:
options: rename -ss and -endpos, allow relative times Rename the -ss option to -start, and -endpos to -length. Add a -end option. The -end option always specifies an absolute end time, as opposed to -endpos/-length. All these options (--start, --end, --length) now accept relative times. Percent positions (e.g. "--start=30%") are interpreted as fractions of the file duration. Negative times (e.g. "--start=-1:00) are interpreted relative to the end of the file. Chapters (e.g. "--start=#3") yield the chapter's time position. The chapter support might be able to replace --chapter completely, but for now I am not sure how well this works out with e.g. DVDs and BDs, and a separate --chapter option is useful interface-wise.
2012-11-15 18:49:17 +01:00
``--start=56``
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Seeks to 56 seconds.
options: rename -ss and -endpos, allow relative times Rename the -ss option to -start, and -endpos to -length. Add a -end option. The -end option always specifies an absolute end time, as opposed to -endpos/-length. All these options (--start, --end, --length) now accept relative times. Percent positions (e.g. "--start=30%") are interpreted as fractions of the file duration. Negative times (e.g. "--start=-1:00) are interpreted relative to the end of the file. Chapters (e.g. "--start=#3") yield the chapter's time position. The chapter support might be able to replace --chapter completely, but for now I am not sure how well this works out with e.g. DVDs and BDs, and a separate --chapter option is useful interface-wise.
2012-11-15 18:49:17 +01:00
``--start=01:10:00``
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Seeks to 1 hour 10 min.
options: rename -ss and -endpos, allow relative times Rename the -ss option to -start, and -endpos to -length. Add a -end option. The -end option always specifies an absolute end time, as opposed to -endpos/-length. All these options (--start, --end, --length) now accept relative times. Percent positions (e.g. "--start=30%") are interpreted as fractions of the file duration. Negative times (e.g. "--start=-1:00) are interpreted relative to the end of the file. Chapters (e.g. "--start=#3") yield the chapter's time position. The chapter support might be able to replace --chapter completely, but for now I am not sure how well this works out with e.g. DVDs and BDs, and a separate --chapter option is useful interface-wise.
2012-11-15 18:49:17 +01:00
``--start=50%``
Seeks to the middle of the file.
``--start=30 --end=40``
Seeks to 30 seconds, plays 10 seconds, and exits.
``--start=-3:20 --length=10``
Seeks to 3 minutes and 20 seconds before the end of the file, plays
10 seconds, and exits.
manpage: minor improvements
2012-12-21 20:36:08 +01:00
``--start='#2' --end='#4'``
options: support chapters for --start and --end The --start and --end switch now accept a chapter number. The chapter number is prefixed with '#', e.g. "--start=#2" jumps to chapter 2. The chapter support might be able to replace --chapter completely, but for now I am not sure how well this works out with e.g. DVDs and BDs, and a separate --chapter option is useful interface-wise. (This was supposed to be added in 51503a, but apparently the fixup commit adding it was lost in a rebase. This might also be the reason for the mess-up fixed in 394285.)
2012-11-18 18:02:14 +01:00
Plays chapters 2 and 3, and exits.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--ssf=<mode>
Specifies software scaler parameters.
:lgb=<0-100>: gaussian blur filter (luma)
:cgb=<0-100>: gaussian blur filter (chroma)
:ls=<-100-100>: sharpen filter (luma)
:cs=<-100-100>: sharpen filter (chroma)
:chs=<h>: chroma horizontal shifting
:cvs=<v>: chroma vertical shifting
manpage: cleanup Removing text about things that have been removed from the code long ago, other fixes.
2012-10-24 01:06:00 +02:00
*EXAMPLE*: ``--vf=scale --ssf=lgb=3.0``
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--sstep=<sec>
manpage: cleanup Removing text about things that have been removed from the code long ago, other fixes.
2012-10-24 01:06:00 +02:00
Skip <sec> seconds after every frame.
*NOTE*: without ``--hr-seek``, skipping will snap to keyframes.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--stereo=<mode>
Select type of MP2/MP3 stereo output.
:0: stereo
:1: left channel
:2: right channel
--stop-xscreensaver
(X11 only)
Turns off xscreensaver at startup and turns it on again on exit. If your
screensaver supports neither the XSS nor XResetScreenSaver API please use
``--heartbeat-cmd`` instead.
--sub=<subtitlefile1,subtitlefile2,...>
Use/display these subtitle files. Only one file can be displayed at the
same time.
--sub-demuxer=<[+]name>
Force subtitle demuxer type for ``--subfile``. Using a '+' before the name
will force it, this will skip some checks! Give the demuxer name as
printed by ``--sub-demuxer=help``.
--sub-no-text-pp
Disables any kind of text post processing done after loading the
subtitles. Used for debug purposes.
--sub-paths=<path1:path2:...>
Specify extra directories where to search for subtitles matching the
video. Multiple directories can be separated by ":" (";" on Windows).
Paths can be relative or absolute. Relative paths are interpreted relative
to video file directory.
*EXAMPLE*: Assuming that ``/path/to/movie/movie.avi`` is played and
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
``--sub-paths=sub:subtitles:/tmp/subs`` is specified, mpv searches for
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
subtitle files in these directories:
- ``/path/to/movie/``
- ``/path/to/movie/sub/``
- ``/path/to/movie/subtitles/``
- ``/tmp/subs/``
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
- ``~/.mpv/sub/``
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--subcp=<codepage>
If your system supports ``iconv(3)``, you can use this option to specify
the subtitle codepage.
*EXAMPLE*:
- ``--subcp=latin2``
- ``--subcp=cp1250``
If the player was compiled with ENCA support you can use special syntax
to use that.
``--subcp=enca:<language>:<fallback codepage>``
You can specify your language using a two letter language code to make
ENCA detect the codepage automatically. If unsure, enter anything and
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
watch mpv ``-v`` output for available languages. Fallback codepage
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
specifies the codepage to use, when autodetection fails.
*EXAMPLE*:
- ``--subcp=enca:cs:latin2`` guess the encoding, assuming the subtitles
are Czech, fall back on latin 2, if the detection fails.
- ``--subcp=enca:pl:cp1250`` guess the encoding for Polish, fall back on
cp1250.
commands: add more property-option bridge uses, rename some options Make more properties use the property-to-option bridge to reduce code size and to enforce consistency. Some options are renamed to the same as the properties (the property names are better in all cases). Do some other minor cleanups. One bigger issue was memory management of strings: M_PROPERTY_TO_STRING assumed the strings were statically allocated, and no dynamic allocations could be returned. Fix this in case the need for such properties arises in the future. Get rid of m_property_string_ro(), because it's not always clear that the "action" parameter is M_PROPERTY_SET and the string argument will be used.
2012-09-18 20:07:24 +02:00
--sub-delay=<sec>
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Delays subtitles by <sec> seconds. Can be negative.
--subfile=<filename>
manpage: cleanup Removing text about things that have been removed from the code long ago, other fixes.
2012-10-24 01:06:00 +02:00
Open the given file with a demuxer, and use its subtitle streams. Same as
``--audiofile``, but for subtitle streams.
sub: remove vobsub reader in favor of ffmpeg vobsub demuxer ffmpeg recently added a demuxer that can read vobsubs (pairs of .sub and .idx files). Get rid of the internal vobsub reader, and use the ffmpeg demuxer instead. Sneak in an unrelated manpage change (autosub default).
2012-12-08 13:59:49 +01:00
*NOTE*: use ``--sub`` for subtitle files. This option is useless, unless
you want to force libavformat subtitle parsers instead of libass or
internal subtitle parsers.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--subfps=<rate>
Specify the framerate of the subtitle file (default: movie fps).
*NOTE*: <rate> > movie fps speeds the subtitles up for frame-based
subtitle files and slows them down for time-based ones.
sub: reimplement -spugauss as --sub-gauss Apparently the -spugauss option was popular. The code originally implementing this is gone (scaler stuff in spudec.c). Reimplement it using libswscale to scale and blur image subtitles if the --sub-gauss option is set. The code does some rather lazy padding to allow the blur to spread pixels past the original image bounding box. (This problem exists with normal bilinear scaling too, but is barely noticable.) Technically, this doesn't just blur subtitles, but anything RGBA (or indexed) that enters the OSD rendering path. But only image subtitles produce these OSD formats currently, so no explicit check is done to prevent blurring in other cases.
2012-11-25 00:06:16 +01:00
--sub-gauss=<0.0-3.0>
Apply gaussian blur to image subtitles (default: 0). This can help making
pixelated DVD/Vobsubs look nicer. A value other than 0 also switches to
software subtitle scaling. Might be slow.
*NOTE*: never applied to text subtitles.
sub: add --sub-gray option to display image subs in grayscale MPlayer/mplayer2 still show DVD subtitles in gray. Depending on who you ask, this can be considered a bug or a feature. Include rendering in gray as explicit feature, so the user can decide what is better. This affects all indexed sub bitmaps entering the OSD rendering path. Currently, this means all image subs are affected by this option, but nothing else.
2012-11-25 23:32:35 +01:00
--sub-gray
Convert image subtitles to grayscale. Can help making yellow DVD/Vobsubs
look nicer.
*NOTE*: never affects text subtitles.
commands: add more property-option bridge uses, rename some options Make more properties use the property-to-option bridge to reduce code size and to enforce consistency. Some options are renamed to the same as the properties (the property names are better in all cases). Do some other minor cleanups. One bigger issue was memory management of strings: M_PROPERTY_TO_STRING assumed the strings were statically allocated, and no dynamic allocations could be returned. Fix this in case the need for such properties arises in the future. Get rid of m_property_string_ro(), because it's not always clear that the "action" parameter is M_PROPERTY_SET and the string argument will be used.
2012-09-18 20:07:24 +02:00
--sub-pos=<0-100>
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Specify the position of subtitles on the screen. The value is the vertical
position of the subtitle in % of the screen height.
manpage: document the dangers of some subtitle options Setting some subtitle options may lead to incorrect rendering of complex ASS subtitle scripts, such as displaced signs or visual artifacts. The user should be made aware that this can happen. In theory, libass could make using some of these options relatively safe, but it doesn't. Note that there are potentially much more options that could in theory break subtitle rendering, but add a warning only to the most fragile ones.
2013-01-04 16:19:49 +01:00
*NOTE*: this affects ASS subtitles as well, and may lead to incorrect
subtitle rendering. Use with care, or use ``--sub-text-margin-y`` instead.
osd: make the OSD and sub font more customizable Make more aspects of the OSD font customizable. This also affects the font used for unstyled subtitles (such as SRT), or when using the --no-ass option. This adds back some customizability that was lost with commit 74e7a1 (osd: use libass for OSD rendering). Removed options: --ass-border-color --ass-color --font --subfont --subfont-text-scale Added options: --osd-color --osd-border --osd-back-color --osd-shadow-color --osd-font --osd-font-size --osd-border-size --osd-margin-x --osd-margin-y --osd-shadow-offset --osd-spacing --sub-scale The font size is now specified in pixels as it would be rendered on a window with a height of 720 pixels. OSD and subtitles are always scaled with the window height, so specifying or expecting an absolute font size doesn't make sense. Such scaled pixel units are used to specify font border etc. as well. (Note: the font size is directly passed to libass. How the fonts are actually rasterized is outside of our control, but in theory ASS font sizes map to "script" pixels and then are scaled to screen size.) The default settings should be about the same, with slight difference due to rounding to the new scales. The OSD and subtitle fonts are not separately configurable. It has limited use and would double the number of newly added options, which would be more confusing than helpful. It could be easily added later, should the need arise. Other small details that change: - ASS_Style.Encoding is not set to -1 for subs anymore (assuming subs use VSFilter direction in -no-ass mode too) - use a different WrapStyle for OSD - ASS forced styles are not applied to OSD
2012-11-17 20:56:45 +01:00
--sub-scale=<0-100>
Factor for the text subtitle font size (default: 1).
manpage: document the dangers of some subtitle options Setting some subtitle options may lead to incorrect rendering of complex ASS subtitle scripts, such as displaced signs or visual artifacts. The user should be made aware that this can happen. In theory, libass could make using some of these options relatively safe, but it doesn't. Note that there are potentially much more options that could in theory break subtitle rendering, but add a warning only to the most fragile ones.
2013-01-04 16:19:49 +01:00
*NOTE*: this affects ASS subtitles as well, and may lead to incorrect
subtitle rendering. Use with care, or use ``--sub-text-font-size`` instead.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--sws=<n>
manpage: remove --zoom remains The --zoom option has been removed, and is always active.
2012-11-24 21:18:50 +01:00
Specify the software scaler algorithm to be used with ``--vf=scale``. This
also affects video output drivers which lack hardware acceleration,
e.g. x11. See also ``--vf=scale``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Available types are:
:0: fast bilinear
:1: bilinear
:2: bicubic (good quality) (default)
:3: experimental
:4: nearest neighbor (bad quality)
:5: area
:6: luma bicubic / chroma bilinear
:7: gauss
:8: sincR
:9: lanczos
:10: natural bicubic spline
*NOTE*: Some ``--sws`` options are tunable. The description of the scale
video filter has further information.
--term-osd, --no-term-osd
Display OSD messages on the console when no video output is available.
Enabled by default.
--term-osd-esc=<string>
Specify the escape sequence to use before writing an OSD message on the
console. The escape sequence should move the pointer to the beginning of
the line used for the OSD and clear it (default: ``^[[A\r^[[K``).
manpage: cleanup Removing text about things that have been removed from the code long ago, other fixes.
2012-10-24 01:06:00 +02:00
--title=<string>
Set the window title. Properties are expanded on playback start
(see ``--playing-msg``).
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--tv=<option1:option2:...>
This option tunes various properties of the TV capture module. For
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
watching TV with mpv, use ``tv://`` or ``tv://<channel_number>`` or
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
even ``tv://<channel_name>`` (see option channels for channel_name below)
as a movie URL. You can also use ``tv:///<input_id>`` to start watching a
movie from a composite or S-Video input (see option input for details).
Available options are:
noaudio
no sound
automute=<0-255> (v4l and v4l2 only)
If signal strength reported by device is less than this value, audio
and video will be muted. In most cases automute=100 will be enough.
Default is 0 (automute disabled).
driver=<value>
See ``--tv=driver=help`` for a list of compiled-in TV input drivers.
Remove BSD legacy TV/radio support (BT848 stuff) FreeBSD actually supports V4L2, and V4L2 supports this chip. Also, this chip is from 1997. Farewell.
2013-02-06 21:55:35 +01:00
available: dummy, v4l2 (default: autodetect)
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
device=<value>
Remove BSD legacy TV/radio support (BT848 stuff) FreeBSD actually supports V4L2, and V4L2 supports this chip. Also, this chip is from 1997. Farewell.
2013-02-06 21:55:35 +01:00
Specify TV device (default: ``/dev/video0``).
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
input=<value>
Specify input (default: 0 (TV), see console output for available
inputs).
freq=<value>
Specify the frequency to set the tuner to (e.g. 511.250). Not
compatible with the channels parameter.
outfmt=<value>
Specify the output format of the tuner with a preset value supported
manpage: fix places that still treat FourCCs and pixel formats equal The video filter chain traditionally used FourCCs for pixel formats. This was recently changed, but some parts of the manpage were not updated properly. Now there are two rypes of options: some which take a FourCC (as used with raw video formats), and some which take a symbolic format identifier (as used in the video filter chain). I realize that it's harder to specify FourCC for RGB formats now (TV stuff may need RGB). They use non-printable characters as part of the FourCC, and have to be specified as hexadecimal numbers (instead of a symbolic identifier). Because I can't be bothered to find out what these numbers are for the respective formats, just remove the old pseudo-FourCCs from the documentation.
2013-01-17 16:00:12 +01:00
by the V4L driver (YV12, UYVY, YUY2, I420)
or an arbitrary format given as hex value.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
width=<value>
output window width
height=<value>
output window height
fps=<value>
framerate at which to capture video (frames per second)
buffersize=<value>
maximum size of the capture buffer in megabytes (default: dynamical)
norm=<value>
Remove BSD legacy TV/radio support (BT848 stuff) FreeBSD actually supports V4L2, and V4L2 supports this chip. Also, this chip is from 1997. Farewell.
2013-02-06 21:55:35 +01:00
See the console output for a list of all available norms, also see the
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
normid option below.
normid=<value> (v4l2 only)
Sets the TV norm to the given numeric ID. The TV norm depends on the
capture card. See the console output for a list of available TV norms.
channel=<value>
Set tuner to <value> channel.
chanlist=<value>
available: argentina, australia, china-bcast, europe-east,
europe-west, france, ireland, italy, japan-bcast, japan-cable,
newzealand, russia, southafrica, us-bcast, us-cable, us-cable-hrc
channels=<chan>-<name>[=<norm>],<chan>-<name>[=<norm>],...
Set names for channels.
*NOTE*: If <chan> is an integer greater than 1000, it will be treated
as frequency (in kHz) rather than channel name from frequency table.
Use _ for spaces in names (or play with quoting ;-). The channel names
will then be written using OSD, and the slave commands
tv_step_channel, tv_set_channel and tv_last_channel will be usable for
a remote control (see LIRC). Not compatible with the frequency
parameter.
*NOTE*: The channel number will then be the position in the 'channels'
list, beginning with 1.
*EXAMPLE*: ``tv://1``, ``tv://TV1``, ``tv_set_channel 1``,
``tv_set_channel TV1``
[brightness|contrast|hue|saturation]=<-100-100>
Set the image equalizer on the card.
audiorate=<value>
Set input audio sample rate.
forceaudio
Capture audio even if there are no audio sources reported by v4l.
alsa
Capture from ALSA.
amode=<0-3>
Choose an audio mode:
:0: mono
:1: stereo
:2: language 1
:3: language 2
forcechan=<1-2>
By default, the count of recorded audio channels is determined
automatically by querying the audio mode from the TV card. This option
allows forcing stereo/mono recording regardless of the amode option
and the values returned by v4l. This can be used for troubleshooting
when the TV card is unable to report the current audio mode.
adevice=<value>
Set an audio device. <value> should be ``/dev/xxx`` for OSS and a
hardware ID for ALSA. You must replace any ':' by a '.' in the
hardware ID for ALSA.
audioid=<value>
Choose an audio output of the capture card, if it has more than one.
[volume|bass|treble|balance]=<0-65535> (v4l1)
[volume|bass|treble|balance]=<0-100> (v4l2)
These options set parameters of the mixer on the video capture card.
They will have no effect, if your card does not have one. For v4l2 50
maps to the default value of the control, as reported by the driver.
gain=<0-100> (v4l2)
Set gain control for video devices (usually webcams) to the desired
value and switch off automatic control. A value of 0 enables automatic
control. If this option is omitted, gain control will not be modified.
immediatemode=<bool>
A value of 0 means capture and buffer audio and video together. A
value of 1 (default) means to do video capture only and let the audio
go through a loopback cable from the TV card to the sound card.
mjpeg
Use hardware MJPEG compression (if the card supports it). When using
this option, you do not need to specify the width and height of the
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
output window, because mpv will determine it automatically from
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
the decimation value (see below).
decimation=<1|2|4>
choose the size of the picture that will be compressed by hardware
MJPEG compression:
:1: full size
- 704x576 PAL
- 704x480 NTSC
:2: medium size
- 352x288 PAL
- 352x240 NTSC
:4: small size
- 176x144 PAL
- 176x120 NTSC
quality=<0-100>
Choose the quality of the JPEG compression (< 60 recommended for full
size).
hidden_video_renderer (dshow only)
Terminate stream with video renderer instead of Null renderer
(default: off). Will help if video freezes but audio does not.
*NOTE*: May not work with ``--vo=directx`` and ``--vf=crop``
combination.
hidden_vp_renderer (dshow only)
Terminate VideoPort pin stream with video renderer instead of removing
it from the graph (default: off). Useful if your card has a VideoPort
pin and video is choppy.
*NOTE*: May not work with ``--vo=directx`` and ``--vf=crop``
combination.
system_clock (dshow only)
Use the system clock as sync source instead of the default graph clock
(usually the clock from one of the live sources in graph).
normalize_audio_chunks (dshow only)
Create audio chunks with a time length equal to video frame time
length (default: off). Some audio cards create audio chunks about 0.5s
in size, resulting in choppy video when using immediatemode=0.
--tvscan=<option1:option2:...>
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
Tune the TV channel scanner. mpv will also print value for "-tv
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
channels=" option, including existing and just found channels.
Available suboptions are:
autostart
Begin channel scanning immediately after startup (default: disabled).
period=<0.1-2.0>
Specify delay in seconds before switching to next channel (default:
0.5). Lower values will cause faster scanning, but can detect inactive
TV channels as active.
threshold=<1-100>
Threshold value for the signal strength (in percent), as reported by
the device (default: 50). A signal strength higher than this value will
indicate that the currently scanning channel is active.
--use-filedir-conf
Look for a file-specific configuration file in the same directory as the
file that is being played.
*WARNING*: May be dangerous if playing from untrusted media.
--user=<username>
Used with some network protocols.
Specify username for HTTP authentication. See also ``--passwd``.
manpage: mark HTTP related options as deprecated/broken Commit c02f25 switched the "http://" protocol to use ffmpeg's HTTP implementation (stream_lavf.c), instead of the mplayer internal one (http.c). Unfortunately, it turns out that there are some network related options that are not respected by stream_lavf.c, and consequently do not work anymore for "http://" URLs. This might be fixed later. Mark them as deprecated for now, as it might take arbitrarily long until this is taken care of.
2012-12-11 01:04:13 +01:00
*WARNING*: works with the deprecated ``mp_http://`` protocol only.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--user-agent=<string>
Use <string> as user agent for HTTP streaming.
-v
Increment verbosity level, one level for each ``-v`` found on the command
line.
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
--vd=<[+|-]family1:(*|decoder1),[+|-]family2:(*|decoder2),...[-]>
Specify a priority list of video decoders to be used, according to their
family and name. See ``--ad`` for further details. Both of these options
use the same syntax and semantics, the only difference is that they
operate on different codec lists.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
*NOTE*: See ``--vd=help`` for a full list of available decoders.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--vf=<filter1[=parameter1:parameter2:...],filter2,...>
Specify a list of video filters to apply to the video stream. See
DOCS: Fix some rst error messages Unfortunately, these do not fix the man page indent issue.
2012-11-29 17:03:48 +01:00
`video_filters` for details and descriptions of the available filters.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
The option variants ``--vf-add``, ``--vf-pre``, ``--vf-del`` and
``--vf-clr`` exist to modify a previously specified list, but you
shouldn't need these for typical use.
options: accept "yes" and "no" only for flags This removes the alternative values like "off", "0", "false" etc., and also the non-English versions of these. This is done for general consistency. It's better to have a single way of doing things when multiple ways don't add singificant value. Also update some choices for consistency.
2012-09-18 15:50:24 +02:00
--vid=<ID|auto|no>
Select video channel. ``auto`` selects the default, ``no`` disables video.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--vo=<driver1[:suboption1[=value]:...],driver2,...[,]>
Specify a priority list of video output drivers to be used. For
interactive use you'd normally specify a single one to use, but in
configuration files specifying a list of fallbacks may make sense. See
DOCS: Fix some rst error messages Unfortunately, these do not fix the man page indent issue.
2012-11-29 17:03:48 +01:00
`video_outputs` for details and descriptions of available drivers.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--volstep=<0-100>
Set the step size of mixer volume changes in percent of the whole range
(default: 3).
--volume=<-1-100>
manpage: cleanup Removing text about things that have been removed from the code long ago, other fixes.
2012-10-24 01:06:00 +02:00
Set the startup volume. A value of -1 (the default) will not change the
volume. See also ``--softvol``.
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
--wid=<ID>
manpage: cleanup Removing text about things that have been removed from the code long ago, other fixes.
2012-10-24 01:06:00 +02:00
(X11 and win32 only)
x11_common: always create a window, even with --wid The --wid switch (for embedding the player into other applications) didn't create a new window, and instead tried to use the window that was passed via --wid directly. This made the code more complex, caused strange X errors (mpv and host application fighting for exclusive X resources), and actually could cause issues if the --wid window wasn't created with the X Visual needed for OpenGL. Always create a window instead. This makes it always possible to embed the player into foreign windows. --geometry doesn't work anymore - the controlling application should always create a new window to place the player inside it, and can control the video window by moving and resizing this window. w32_common.c actually did this right, and always creates a new window.
2013-02-24 23:35:13 +01:00
This tells mpv to attach to an existing window. The ID is interpreted as
"Window" on X11, and as HWND on win32. If a VO is selected that supports
this option, a new window will be created and the given window will be set
as parent. The window will always be resized to cover the parent window
fully, and will add black bars to compensate for the video aspect ratio.
See ``--slave-broken``.
Copy Permalink