mpv/video/out/vo_rpi.c

801 lines
22 KiB
C
Raw Normal View History

RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
/*
* This file is part of mpv.
*
Relicense some non-MPlayer source files to LGPL 2.1 or later This covers source files which were added in mplayer2 and mpv times only, and where all code is covered by LGPL relicensing agreements. There are probably more files to which this applies, but I'm being conservative here. A file named ao_sdl.c exists in MPlayer too, but the mpv one is a complete rewrite, and was added some time after the original ao_sdl.c was removed. The same applies to vo_sdl.c, for which the SDL2 API is radically different in addition (MPlayer supports SDL 1.2 only). common.c contains only code written by me. But common.h is a strange case: although it originally was named mp_common.h and exists in MPlayer too, by now it contains only definitions written by uau and me. The exceptions are the CONTROL_ defines - thus not changing the license of common.h yet. codec_tags.c contained once large tables generated from MPlayer's codecs.conf, but all of these tables were removed. From demux_playlist.c I'm removing a code fragment from someone who was not asked; this probably could be done later (see commit 15dccc37). misc.c is a bit complicated to reason about (it was split off mplayer.c and thus contains random functions out of this file), but actually all functions have been added post-MPlayer. Except get_relative_time(), which was written by uau, but looks similar to 3 different versions of something similar in each of the Unix/win32/OSX timer source files. I'm not sure what that means in regards to copyright, so I've just moved it into another still-GPL source file for now. screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but they're all gone.
2016-01-19 18:36:06 +01:00
* mpv is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
*
* mpv is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
Relicense some non-MPlayer source files to LGPL 2.1 or later This covers source files which were added in mplayer2 and mpv times only, and where all code is covered by LGPL relicensing agreements. There are probably more files to which this applies, but I'm being conservative here. A file named ao_sdl.c exists in MPlayer too, but the mpv one is a complete rewrite, and was added some time after the original ao_sdl.c was removed. The same applies to vo_sdl.c, for which the SDL2 API is radically different in addition (MPlayer supports SDL 1.2 only). common.c contains only code written by me. But common.h is a strange case: although it originally was named mp_common.h and exists in MPlayer too, by now it contains only definitions written by uau and me. The exceptions are the CONTROL_ defines - thus not changing the license of common.h yet. codec_tags.c contained once large tables generated from MPlayer's codecs.conf, but all of these tables were removed. From demux_playlist.c I'm removing a code fragment from someone who was not asked; this probably could be done later (see commit 15dccc37). misc.c is a bit complicated to reason about (it was split off mplayer.c and thus contains random functions out of this file), but actually all functions have been added post-MPlayer. Except get_relative_time(), which was written by uau, but looks similar to 3 different versions of something similar in each of the Unix/win32/OSX timer source files. I'm not sure what that means in regards to copyright, so I've just moved it into another still-GPL source file for now. screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but they're all gone.
2016-01-19 18:36:06 +01:00
* GNU Lesser General Public License for more details.
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
*
Relicense some non-MPlayer source files to LGPL 2.1 or later This covers source files which were added in mplayer2 and mpv times only, and where all code is covered by LGPL relicensing agreements. There are probably more files to which this applies, but I'm being conservative here. A file named ao_sdl.c exists in MPlayer too, but the mpv one is a complete rewrite, and was added some time after the original ao_sdl.c was removed. The same applies to vo_sdl.c, for which the SDL2 API is radically different in addition (MPlayer supports SDL 1.2 only). common.c contains only code written by me. But common.h is a strange case: although it originally was named mp_common.h and exists in MPlayer too, by now it contains only definitions written by uau and me. The exceptions are the CONTROL_ defines - thus not changing the license of common.h yet. codec_tags.c contained once large tables generated from MPlayer's codecs.conf, but all of these tables were removed. From demux_playlist.c I'm removing a code fragment from someone who was not asked; this probably could be done later (see commit 15dccc37). misc.c is a bit complicated to reason about (it was split off mplayer.c and thus contains random functions out of this file), but actually all functions have been added post-MPlayer. Except get_relative_time(), which was written by uau, but looks similar to 3 different versions of something similar in each of the Unix/win32/OSX timer source files. I'm not sure what that means in regards to copyright, so I've just moved it into another still-GPL source file for now. screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but they're all gone.
2016-01-19 18:36:06 +01:00
* You should have received a copy of the GNU Lesser General Public
* License along with mpv. If not, see <http://www.gnu.org/licenses/>.
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <math.h>
#include <stdbool.h>
#include <assert.h>
#include <bcm_host.h>
#include <interface/mmal/mmal.h>
#include <interface/mmal/util/mmal_util.h>
#include <interface/mmal/util/mmal_default_components.h>
#include <interface/mmal/vc/mmal_vc_api.h>
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
#include <libavutil/rational.h>
#include "common/common.h"
#include "common/msg.h"
#include "options/m_config.h"
#include "vo.h"
#include "win_state.h"
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
#include "video/mp_image.h"
#include "sub/osd.h"
#include "opengl/osd.h"
#include "opengl/context_rpi.h"
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
struct priv {
DISPMANX_DISPLAY_HANDLE_T display;
DISPMANX_ELEMENT_HANDLE_T window;
DISPMANX_ELEMENT_HANDLE_T osd_overlay;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
DISPMANX_UPDATE_HANDLE_T update;
uint32_t w, h;
uint32_t x, y;
double display_fps;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
double osd_pts;
struct mp_osd_res osd_res;
struct mp_egl_rpi egl;
struct gl_shader_cache *sc;
struct mpgl_osd *osd;
int64_t osd_change_counter;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
MMAL_COMPONENT_T *renderer;
bool renderer_enabled;
bool display_synced, skip_osd;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
struct mp_image *next_image;
// for RAM input
MMAL_POOL_T *swpool;
pthread_mutex_t vsync_mutex;
pthread_cond_t vsync_cond;
int64_t vsync_counter;
bool reload_display;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
int background_layer;
int video_layer;
int osd_layer;
int display_nr;
int layer;
int background;
int enable_osd;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
};
// Magic alignments (in pixels) expected by the MMAL internals.
#define ALIGN_W 32
#define ALIGN_H 16
static void recreate_renderer(struct vo *vo);
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
// Make mpi point to buffer, assuming MMAL_ENCODING_I420.
// buffer can be NULL.
// Return the required buffer space.
static size_t layout_buffer(struct mp_image *mpi, MMAL_BUFFER_HEADER_T *buffer,
struct mp_image_params *params)
{
assert(params->imgfmt == IMGFMT_420P);
mp_image_set_params(mpi, params);
int w = MP_ALIGN_UP(params->w, ALIGN_W);
int h = MP_ALIGN_UP(params->h, ALIGN_H);
uint8_t *cur = buffer ? buffer->data : NULL;
size_t size = 0;
for (int i = 0; i < 3; i++) {
int div = i ? 2 : 1;
mpi->planes[i] = cur;
mpi->stride[i] = w / div;
size_t plane_size = h / div * mpi->stride[i];
if (cur)
cur += plane_size;
size += plane_size;
}
return size;
}
#define GLSL(x) gl_sc_add(p->sc, #x "\n");
#define GLSLF(...) gl_sc_addf(p->sc, __VA_ARGS__)
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
static void update_osd(struct vo *vo)
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
{
struct priv *p = vo->priv;
if (!p->enable_osd)
return;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
mpgl_osd_generate(p->osd, p->osd_res, p->osd_pts, 0, 0);
int64_t osd_change_counter = mpgl_get_change_counter(p->osd);
if (p->osd_change_counter == osd_change_counter) {
p->skip_osd = true;
return;
}
p->osd_change_counter = osd_change_counter;
2015-11-25 22:06:50 +01:00
MP_STATS(vo, "start rpi_osd");
p->egl.gl->ClearColor(0, 0, 0, 0);
p->egl.gl->Clear(GL_COLOR_BUFFER_BIT);
for (int n = 0; n < MAX_OSD_PARTS; n++) {
enum sub_bitmap_format fmt = mpgl_osd_get_part_format(p->osd, n);
if (!fmt)
continue;
gl_sc_uniform_sampler(p->sc, "osdtex", GL_TEXTURE_2D, 0);
switch (fmt) {
case SUBBITMAP_RGBA: {
GLSLF("// OSD (RGBA)\n");
GLSL(color = texture(osdtex, texcoord).bgra;)
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
break;
}
case SUBBITMAP_LIBASS: {
GLSLF("// OSD (libass)\n");
GLSL(color =
vec4(ass_color.rgb, ass_color.a * texture(osdtex, texcoord).r);)
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
break;
}
default:
abort();
}
gl_sc_set_vao(p->sc, mpgl_osd_get_vao(p->osd));
gl_sc_gen_shader_and_reset(p->sc);
mpgl_osd_draw_part(p->osd, p->osd_res.w, -p->osd_res.h, n);
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
}
2015-11-25 22:06:50 +01:00
MP_STATS(vo, "stop rpi_osd");
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
}
static void resize(struct vo *vo)
{
struct priv *p = vo->priv;
MMAL_PORT_T *input = p->renderer->input[0];
struct mp_rect src, dst;
vo_get_src_dst_rects(vo, &src, &dst, &p->osd_res);
int rotate[] = {MMAL_DISPLAY_ROT0,
MMAL_DISPLAY_ROT90,
MMAL_DISPLAY_ROT180,
MMAL_DISPLAY_ROT270};
int src_w = src.x1 - src.x0, src_h = src.y1 - src.y0,
dst_w = dst.x1 - dst.x0, dst_h = dst.y1 - dst.y0;
int p_x, p_y;
av_reduce(&p_x, &p_y, dst_w * src_h, src_w * dst_h, 16000);
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
MMAL_DISPLAYREGION_T dr = {
.hdr = { .id = MMAL_PARAMETER_DISPLAYREGION,
.size = sizeof(MMAL_DISPLAYREGION_T), },
.src_rect = { .x = src.x0, .y = src.y0, .width = src_w, .height = src_h },
.dest_rect = { .x = dst.x0 + p->x, .y = dst.y0 + p->y,
.width = dst_w, .height = dst_h },
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
.layer = p->video_layer,
.display_num = p->display_nr,
.pixel_x = p_x,
.pixel_y = p_y,
.transform = rotate[vo->params ? vo->params->rotate / 90 : 0],
.fullscreen = vo->opts->fullscreen,
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
.set = MMAL_DISPLAY_SET_SRC_RECT | MMAL_DISPLAY_SET_DEST_RECT |
MMAL_DISPLAY_SET_LAYER | MMAL_DISPLAY_SET_NUM |
MMAL_DISPLAY_SET_PIXEL | MMAL_DISPLAY_SET_TRANSFORM |
MMAL_DISPLAY_SET_FULLSCREEN,
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
};
if (vo->params && (vo->params->rotate % 180) == 90) {
MPSWAP(int, dr.src_rect.x, dr.src_rect.y);
MPSWAP(int, dr.src_rect.width, dr.src_rect.height);
}
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
if (mmal_port_parameter_set(input, &dr.hdr))
MP_WARN(vo, "could not set video rectangle\n");
}
static void destroy_overlays(struct vo *vo)
{
struct priv *p = vo->priv;
if (p->window)
vc_dispmanx_element_remove(p->update, p->window);
p->window = 0;
mpgl_osd_destroy(p->osd);
p->osd = NULL;
gl_sc_destroy(p->sc);
p->sc = NULL;
mp_egl_rpi_destroy(&p->egl);
if (p->osd_overlay)
vc_dispmanx_element_remove(p->update, p->osd_overlay);
p->osd_overlay = 0;
}
static int update_display_size(struct vo *vo)
{
struct priv *p = vo->priv;
uint32_t n_w = 0, n_h = 0;
if (graphics_get_display_size(0, &n_w, &n_h) < 0) {
MP_FATAL(vo, "Could not get display size.\n");
return -1;
}
if (p->w == n_w && p->h == n_h)
return 0;
p->w = n_w;
p->h = n_h;
MP_VERBOSE(vo, "Display size: %dx%d\n", p->w, p->h);
return 0;
}
static int create_overlays(struct vo *vo)
{
struct priv *p = vo->priv;
destroy_overlays(vo);
if (!p->display)
return -1;
if (vo->opts->fullscreen && p->background) {
// Use the whole screen.
VC_RECT_T dst = {.width = p->w, .height = p->h};
VC_RECT_T src = {.width = 1 << 16, .height = 1 << 16};
VC_DISPMANX_ALPHA_T alpha = {
.flags = DISPMANX_FLAGS_ALPHA_FIXED_ALL_PIXELS,
.opacity = 0xFF,
};
p->window = vc_dispmanx_element_add(p->update, p->display,
p->background_layer,
&dst, 0, &src,
DISPMANX_PROTECTION_NONE,
&alpha, 0, 0);
if (!p->window) {
MP_FATAL(vo, "Could not add DISPMANX element.\n");
return -1;
}
}
if (p->enable_osd) {
VC_RECT_T dst = {.x = p->x, .y = p->y,
.width = p->osd_res.w, .height = p->osd_res.h};
VC_RECT_T src = {.width = p->osd_res.w << 16, .height = p->osd_res.h << 16};
VC_DISPMANX_ALPHA_T alpha = {
.flags = DISPMANX_FLAGS_ALPHA_FROM_SOURCE,
.opacity = 0xFF,
};
p->osd_overlay = vc_dispmanx_element_add(p->update, p->display,
p->osd_layer,
&dst, 0, &src,
DISPMANX_PROTECTION_NONE,
&alpha, 0, 0);
if (!p->osd_overlay) {
MP_FATAL(vo, "Could not add DISPMANX element.\n");
return -1;
}
if (mp_egl_rpi_init(&p->egl, p->osd_overlay,
p->osd_res.w, p->osd_res.h) < 0)
{
MP_FATAL(vo, "EGL/GLES initialization for OSD renderer failed.\n");
return -1;
}
p->sc = gl_sc_create(p->egl.gl, vo->log),
p->osd = mpgl_osd_init(p->egl.gl, vo->log, vo->osd);
p->osd_change_counter = -1; // force initial overlay rendering
}
p->display_fps = 0;
TV_GET_STATE_RESP_T tvstate;
TV_DISPLAY_STATE_T tvstate_disp;
if (!vc_tv_get_state(&tvstate) && !vc_tv_get_display_state(&tvstate_disp)) {
if (tvstate_disp.state & (VC_HDMI_HDMI | VC_HDMI_DVI)) {
p->display_fps = tvstate_disp.display.hdmi.frame_rate;
HDMI_PROPERTY_PARAM_T param = {
.property = HDMI_PROPERTY_PIXEL_CLOCK_TYPE,
};
if (!vc_tv_hdmi_get_property(&param) &&
param.param1 == HDMI_PIXEL_CLOCK_TYPE_NTSC)
p->display_fps = p->display_fps / 1.001;
} else {
p->display_fps = tvstate_disp.display.sdtv.frame_rate;
}
}
vo_event(vo, VO_EVENT_WIN_STATE);
vc_dispmanx_update_submit_sync(p->update);
p->update = vc_dispmanx_update_start(10);
return 0;
}
static int set_geometry(struct vo *vo)
{
struct priv *p = vo->priv;
if (vo->opts->fullscreen) {
vo->dwidth = p->w;
vo->dheight = p->h;
p->x = p->y = 0;
} else {
struct vo_win_geometry geo;
struct mp_rect screenrc = {0, 0, p->w, p->h};
vo_calc_window_geometry(vo, &screenrc, &geo);
vo_apply_window_geometry(vo, &geo);
p->x = geo.win.x0;
p->y = geo.win.y0;
}
resize(vo);
if (create_overlays(vo) < 0)
return -1;
return 0;
}
static void wait_next_vsync(struct vo *vo)
{
struct priv *p = vo->priv;
pthread_mutex_lock(&p->vsync_mutex);
int64_t old = p->vsync_counter;
while (old == p->vsync_counter && !p->reload_display)
pthread_cond_wait(&p->vsync_cond, &p->vsync_mutex);
pthread_mutex_unlock(&p->vsync_mutex);
}
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
static void flip_page(struct vo *vo)
{
struct priv *p = vo->priv;
if (!p->renderer_enabled)
return;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
struct mp_image *mpi = p->next_image;
p->next_image = NULL;
// For OSD
if (!p->skip_osd && p->egl.gl)
eglSwapBuffers(p->egl.egl_display, p->egl.egl_surface);
p->skip_osd = false;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
if (mpi) {
MMAL_PORT_T *input = p->renderer->input[0];
MMAL_BUFFER_HEADER_T *ref = (void *)mpi->planes[3];
// Assume this field is free for use by us.
ref->user_data = mpi;
if (mmal_port_send_buffer(input, ref)) {
MP_ERR(vo, "could not queue picture!\n");
talloc_free(mpi);
}
}
if (p->display_synced)
wait_next_vsync(vo);
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
}
static void free_mmal_buffer(void *arg)
{
MMAL_BUFFER_HEADER_T *buffer = arg;
mmal_buffer_header_release(buffer);
}
static void draw_frame(struct vo *vo, struct vo_frame *frame)
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
{
struct priv *p = vo->priv;
if (!p->renderer_enabled)
return;
mp_image_t *mpi = NULL;
if (!frame->redraw && !frame->repeat)
mpi = mp_image_new_ref(frame->current);
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
talloc_free(p->next_image);
p->next_image = NULL;
if (mpi)
p->osd_pts = mpi->pts;
// Redraw only if the OSD has meaningfully changed, which we assume it
// hasn't when a frame is merely repeated for display sync.
p->skip_osd = !frame->redraw && frame->repeat;
if (!p->skip_osd && p->egl.gl)
update_osd(vo);
p->display_synced = frame->display_synced;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
if (mpi && mpi->imgfmt != IMGFMT_MMAL) {
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
MMAL_BUFFER_HEADER_T *buffer = mmal_queue_wait(p->swpool->queue);
if (!buffer) {
talloc_free(mpi);
MP_ERR(vo, "Can't allocate buffer.\n");
return;
}
mmal_buffer_header_reset(buffer);
struct mp_image *new_ref = mp_image_new_custom_ref(NULL, buffer,
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
free_mmal_buffer);
if (!new_ref) {
mmal_buffer_header_release(buffer);
talloc_free(mpi);
MP_ERR(vo, "Out of memory.\n");
return;
}
mp_image_setfmt(new_ref, IMGFMT_MMAL);
new_ref->planes[3] = (void *)buffer;
struct mp_image dmpi = {0};
buffer->length = layout_buffer(&dmpi, buffer, vo->params);
mp_image_copy(&dmpi, mpi);
talloc_free(mpi);
mpi = new_ref;
}
p->next_image = mpi;
}
static int query_format(struct vo *vo, int format)
{
return format == IMGFMT_MMAL || format == IMGFMT_420P;
}
static MMAL_FOURCC_T map_csp(enum mp_csp csp)
{
switch (csp) {
case MP_CSP_BT_601: return MMAL_COLOR_SPACE_ITUR_BT601;
case MP_CSP_BT_709: return MMAL_COLOR_SPACE_ITUR_BT709;
case MP_CSP_SMPTE_240M: return MMAL_COLOR_SPACE_SMPTE240M;
default: return MMAL_COLOR_SPACE_UNKNOWN;
}
}
static void control_port_cb(MMAL_PORT_T *port, MMAL_BUFFER_HEADER_T *buffer)
{
mmal_buffer_header_release(buffer);
}
static void input_port_cb(MMAL_PORT_T *port, MMAL_BUFFER_HEADER_T *buffer)
{
struct mp_image *mpi = buffer->user_data;
talloc_free(mpi);
}
static void disable_renderer(struct vo *vo)
{
struct priv *p = vo->priv;
if (p->renderer_enabled) {
mmal_port_disable(p->renderer->control);
mmal_port_disable(p->renderer->input[0]);
mmal_port_flush(p->renderer->control);
mmal_port_flush(p->renderer->input[0]);
mmal_component_disable(p->renderer);
}
mmal_pool_destroy(p->swpool);
p->swpool = NULL;
p->renderer_enabled = false;
}
static int reconfig(struct vo *vo, struct mp_image_params *params)
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
{
struct priv *p = vo->priv;
MMAL_PORT_T *input = p->renderer->input[0];
bool opaque = params->imgfmt == IMGFMT_MMAL;
if (!p->display)
return -1;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
disable_renderer(vo);
input->format->encoding = opaque ? MMAL_ENCODING_OPAQUE : MMAL_ENCODING_I420;
input->format->es->video.width = MP_ALIGN_UP(params->w, ALIGN_W);
input->format->es->video.height = MP_ALIGN_UP(params->h, ALIGN_H);
input->format->es->video.crop = (MMAL_RECT_T){0, 0, params->w, params->h};
input->format->es->video.par = (MMAL_RATIONAL_T){params->p_w, params->p_h};
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
input->format->es->video.color_space = map_csp(params->colorspace);
if (mmal_port_format_commit(input))
return -1;
input->buffer_num = MPMAX(input->buffer_num_min,
input->buffer_num_recommended) + 3;
input->buffer_size = MPMAX(input->buffer_size_min,
input->buffer_size_recommended);
if (!opaque) {
size_t size = layout_buffer(&(struct mp_image){0}, NULL, params);
if (input->buffer_size != size) {
MP_FATAL(vo, "We disagree with MMAL about buffer sizes.\n");
return -1;
}
p->swpool = mmal_pool_create(input->buffer_num, input->buffer_size);
if (!p->swpool) {
MP_FATAL(vo, "Could not allocate buffer pool.\n");
return -1;
}
}
if (set_geometry(vo) < 0)
return -1;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
p->renderer_enabled = true;
if (mmal_port_enable(p->renderer->control, control_port_cb))
return -1;
if (mmal_port_enable(input, input_port_cb))
return -1;
if (mmal_component_enable(p->renderer)) {
MP_FATAL(vo, "Failed to enable video renderer.\n");
return -1;
}
return 0;
}
static struct mp_image *take_screenshot(struct vo *vo)
{
struct priv *p = vo->priv;
if (!p->display)
return NULL;
struct mp_image *img = mp_image_alloc(IMGFMT_BGR0, p->w, p->h);
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
if (!img)
return NULL;
DISPMANX_RESOURCE_HANDLE_T resource =
vc_dispmanx_resource_create(VC_IMAGE_ARGB8888,
img->w | ((img->w * 4) << 16), img->h,
&(int32_t){0});
if (!resource)
goto fail;
if (vc_dispmanx_snapshot(p->display, resource, 0))
goto fail;
VC_RECT_T rc = {.width = img->w, .height = img->h};
if (vc_dispmanx_resource_read_data(resource, &rc, img->planes[0], img->stride[0]))
goto fail;
vc_dispmanx_resource_delete(resource);
return img;
fail:
vc_dispmanx_resource_delete(resource);
talloc_free(img);
return NULL;
}
static int control(struct vo *vo, uint32_t request, void *data)
{
struct priv *p = vo->priv;
switch (request) {
case VOCTRL_FULLSCREEN:
vo->opts->fullscreen = !vo->opts->fullscreen;
if (p->renderer_enabled)
set_geometry(vo);
vo->want_redraw = true;
return VO_TRUE;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
case VOCTRL_GET_PANSCAN:
return VO_TRUE;
case VOCTRL_SET_PANSCAN:
if (p->renderer_enabled)
resize(vo);
vo->want_redraw = true;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
return VO_TRUE;
case VOCTRL_REDRAW_FRAME:
p->osd_change_counter = -1;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
update_osd(vo);
return VO_TRUE;
case VOCTRL_SCREENSHOT_WIN:
*(struct mp_image **)data = take_screenshot(vo);
return VO_TRUE;
case VOCTRL_CHECK_EVENTS: {
pthread_mutex_lock(&p->vsync_mutex);
bool reload_required = p->reload_display;
p->reload_display = false;
pthread_mutex_unlock(&p->vsync_mutex);
if (reload_required)
recreate_renderer(vo);
return VO_TRUE;
}
case VOCTRL_GET_DISPLAY_FPS:
*(double *)data = p->display_fps;
return VO_TRUE;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
}
return VO_NOTIMPL;
}
static void tv_callback(void *callback_data, uint32_t reason, uint32_t param1,
uint32_t param2)
{
struct vo *vo = callback_data;
struct priv *p = vo->priv;
pthread_mutex_lock(&p->vsync_mutex);
p->reload_display = true;
pthread_cond_signal(&p->vsync_cond);
pthread_mutex_unlock(&p->vsync_mutex);
vo_wakeup(vo);
}
static void vsync_callback(DISPMANX_UPDATE_HANDLE_T u, void *arg)
{
struct vo *vo = arg;
struct priv *p = vo->priv;
pthread_mutex_lock(&p->vsync_mutex);
p->vsync_counter += 1;
pthread_cond_signal(&p->vsync_cond);
pthread_mutex_unlock(&p->vsync_mutex);
}
static void destroy_dispmanx(struct vo *vo)
{
struct priv *p = vo->priv;
disable_renderer(vo);
destroy_overlays(vo);
if (p->display) {
vc_dispmanx_vsync_callback(p->display, NULL, NULL);
vc_dispmanx_display_close(p->display);
}
p->display = 0;
}
static int recreate_dispmanx(struct vo *vo)
{
struct priv *p = vo->priv;
p->display = vc_dispmanx_display_open(p->display_nr);
p->update = vc_dispmanx_update_start(0);
if (!p->display || !p->update) {
MP_FATAL(vo, "Could not get DISPMANX objects.\n");
if (p->display)
vc_dispmanx_display_close(p->display);
p->display = 0;
p->update = 0;
return -1;
}
update_display_size(vo);
vc_dispmanx_vsync_callback(p->display, vsync_callback, vo);
return 0;
}
static void recreate_renderer(struct vo *vo)
{
MP_WARN(vo, "Recreating renderer after display change.\n");
destroy_dispmanx(vo);
recreate_dispmanx(vo);
if (vo->params) {
if (reconfig(vo, vo->params) < 0)
MP_FATAL(vo, "Recreation failed.\n");
}
}
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
static void uninit(struct vo *vo)
{
struct priv *p = vo->priv;
vc_tv_unregister_callback_full(tv_callback, vo);
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
talloc_free(p->next_image);
destroy_dispmanx(vo);
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
if (p->renderer)
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
mmal_component_release(p->renderer);
mmal_vc_deinit();
pthread_cond_destroy(&p->vsync_cond);
pthread_mutex_destroy(&p->vsync_mutex);
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
}
static int preinit(struct vo *vo)
{
struct priv *p = vo->priv;
p->background_layer = p->layer;
p->video_layer = p->layer + 1;
p->osd_layer = p->layer + 2;
p->egl.log = vo->log;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
bcm_host_init();
if (mmal_vc_init()) {
MP_FATAL(vo, "Could not initialize MMAL.\n");
return -1;
}
pthread_mutex_init(&p->vsync_mutex, NULL);
pthread_cond_init(&p->vsync_cond, NULL);
if (recreate_dispmanx(vo) < 0)
goto fail;
if (update_display_size(vo) < 0)
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
goto fail;
if (mmal_component_create(MMAL_COMPONENT_DEFAULT_VIDEO_RENDERER, &p->renderer))
{
MP_FATAL(vo, "Could not create MMAL renderer.\n");
goto fail;
}
vc_tv_register_callback(tv_callback, vo);
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
return 0;
fail:
uninit(vo);
return -1;
}
#define OPT_BASE_STRUCT struct priv
static const struct m_option options[] = {
OPT_INT("display", display_nr, 0),
OPT_INT("layer", layer, 0, OPTDEF_INT(-10)),
OPT_FLAG("background", background, 0),
OPT_FLAG("osd", enable_osd, 0, OPTDEF_INT(1)),
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
{0},
};
const struct vo_driver video_out_rpi = {
.description = "Raspberry Pi (MMAL)",
.name = "rpi",
.caps = VO_CAP_ROTATE90,
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
.preinit = preinit,
.query_format = query_format,
.reconfig = reconfig,
.control = control,
.draw_frame = draw_frame,
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 15:12:11 +02:00
.flip_page = flip_page,
.uninit = uninit,
.priv_size = sizeof(struct priv),
.options = options,
};