github/mpv
1
Fork 0
mirror of https://github.com/mpv-player/mpv synced 2024-11-07 01:47:00 +01:00
Code Releases Activity
169b3abd78
mpv/Makefile

475 lines
15 KiB
Makefile
Raw Normal View History

Add copyright and license statement. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@27097 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-06-17 13:40:04 +02:00
# MPlayer Makefile
#
# copyright (c) 2008 Diego Biurrun
# Rewritten entirely from a set of Makefiles written by Arpi and many others.
#
# This file is part of MPlayer.
#
# MPlayer is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# MPlayer is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with MPlayer; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Initial revision git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@2 b3059339-0415-0410-9bf9-f77b7e298cf2
2001-02-24 21:28:24 +01:00
include config.mak
Add some comment headings to divide the Makefile into logical chapters. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26708 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-05-09 19:51:44 +02:00
###### variable declarations #######
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
SOURCES_AUDIO_INPUT-$(ALSA) += stream/ai_alsa1x.c
SOURCES_AUDIO_INPUT-$(OSS) += stream/ai_oss.c
SOURCES-$(AUDIO_INPUT) += $(SOURCES_AUDIO_INPUT-yes)
SOURCES-$(CDDA) += stream/stream_cdda.c \
stream/cdinfo.c
SOURCES-$(DVBIN) += stream/dvb_tune.c \
stream/stream_dvb.c
SOURCES-$(DVDREAD) += stream/stream_dvd.c \
stream/stream_dvd_common.c
osdep: remove unused mmap compatibility hacks Not sure how this worked. Only af_export.c and tvi_v4l2.c were using mmap, but they didn't include osdep/mmap.h or mmap_anon.h. In any case, we trust that the target system is sufficiently POSIX compliant if mmap is actually defined (as checked by configure).
2013-07-07 21:44:37 +02:00
SOURCES-$(HAVE_SYS_MMAN_H) += audio/filter/af_export.c
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
SOURCES-$(LADSPA) += audio/filter/af_ladspa.c
sub: add demux_libass wrapper, drop old hacks demux_libass.c allows us to make subtitle format detection part of the normal file loading process. libass has no probe function, but trying to load the start of a file (the first 4 KB) is good enough. Hope that libass can even handle random binary input gracefully without printing stupid log messages, and that the libass parser doesn't accept too many non-ASS files as input. This doesn't handle the -subcp option correctly yet. This will be fixed later.
2013-06-22 02:09:52 +02:00
SOURCES-$(LIBASS) += sub/ass_mp.c sub/sd_ass.c \
demux/demux_libass.c
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
SOURCES-$(LIBBLURAY) += stream/stream_bluray.c
SOURCES-$(LIBBS2B) += audio/filter/af_bs2b.c
SOURCES-$(LIBPOSTPROC) += video/filter/vf_pp.c
SOURCES-$(LIBSMBCLIENT) += stream/stream_smb.c
path: add mp_find_config_file and reorganize some of the code Add `mp_find_config_file` to search different known paths and use that in ass_mp to look for the fontconfig configuration file. Some incidental changes spawned by this feature where: * Buffer allocation for the strings containing the paths is now performed with talloc. All of the allocations are done on a NULL context, but it still improves readability of the code. * Move the OSX function for lookup inside of a bundle: this code path was currently not used by the bundle generated with `make osxbundle`. The plan is to use it again in a future commit to get a fontconfig config file.
2012-12-09 15:05:21 +01:00
SOURCES-$(MACOSX_BUNDLE) += osdep/macosx_bundle.m
osx: create macosx_events to deal with keyDown events On OSX with Cocoa enabled keyDown events are now handled with addLocalMonitorForEventsMatchingMask:handler:. This allows to respond to events even when there is no VO initialized but the GUI is focused.
2013-06-02 17:39:05 +02:00
SOURCES-$(COCOA) += video/out/cocoa_common.m \
osdep/macosx_application.m \
osx: add Apple Remote support After killing the non functional AR support in c8fd9e5 I got much complaints so this adds AR support back in (and it works). I am using the HIDRemote class by Felix Schwarz and that part of the code is under the BSD license. I slightly modified it replacing [NSApplication sharedApplication] with NSApp. The code of the class is quite complex (probably because it had to deal with all the edge cases with IOKit) but it works nicely as a black box. In a later commit I'll remove the deprecation warnings caused by HIDRemote's usage of Gestalt. Check out `etc/input.conf` for the default bindings. Apple Remote functionality is automatically compiled in when cocoa is enabled. It can be disabled at runtime with the `--no-ar` option.
2013-06-03 00:52:40 +02:00
osdep/macosx_events.m \
osdep/ar/HIDRemote.m
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
SOURCES-$(MNG) += demux/demux_mng.c
SOURCES-$(MPG123) += audio/decode/ad_mpg123.c
SOURCES-$(NEED_GETTIMEOFDAY) += osdep/gettimeofday.c
SOURCES-$(NEED_GLOB) += osdep/glob-win.c
SOURCES-$(PRIORITY) += osdep/priority.c
SOURCES-$(PVR) += stream/stream_pvr.c
SOURCES-$(RADIO) += stream/stream_radio.c
SOURCES-$(RADIO_CAPTURE) += stream/audio_in.c
stream: rename cache2.c to cache.c I never found cache1.c (whatever it was named, if it ever existed). cache2.h will be deleted later, so don't go through the trouble of renaming it.
2013-06-06 20:33:02 +02:00
SOURCES-$(STREAM_CACHE) += stream/cache.c
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
SOURCES-$(TV) += stream/stream_tv.c stream/tv.c \
stream/frequencies.c stream/tvi_dummy.c
SOURCES-$(TV_V4L2) += stream/tvi_v4l2.c stream/audio_in.c
SOURCES-$(VCD) += stream/stream_vcd.c
SOURCES-$(DUMMY_OSD) += sub/osd_dummy.c
SOURCES-$(LIBASS_OSD) += sub/osd_libass.c
SOURCES-$(ALSA) += audio/out/ao_alsa.c
SOURCES-$(CACA) += video/out/vo_caca.c
vo/ao: SDL 1.2+ audio driver, SDL 2.0+ accelerated video driver This mainly serves as a fallback for platforms where nothing better is available; also as a debugging help. Both the audio and video driver are not first class - the audio driver lacks delay detection, and the video driver only supports a single YUV color space. Configure options: --disable-sdl2 to disable SDL 2.0+ detection, --disable-sdl to disable SDL 1.2+ detection. Both options need to be specified to turn off SDL support entirely.
2012-12-28 08:07:14 +01:00
SOURCES-$(SDL) += audio/out/ao_sdl.c
SOURCES-$(SDL2) += video/out/vo_sdl.c
core: add a spsc ringbuffer implementation Currently every single AO was implementing it's own ringbuffer, many times with slightly different semantics. This is an attempt to fix the problem. I stole some good ideas from ao_portaudio's ringbuffer and went from there. The main difference is this one stores wpos and rpos which are absolute positions in an "infinite" buffer. To find the actual position for writing / reading just apply modulo size. The producer only modifies wpos while the consumer only modifies rpos. This makes it pretty easy to reason about and make the operations thread safe by using barriers (thread safety is guaranteed only in the Single-Producer/Single- Consumer case). Also adapted ao_coreaudio to use this ringbuffer.
2013-05-23 21:23:32 +02:00
SOURCES-$(COREAUDIO) += audio/out/ao_coreaudio.c
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
SOURCES-$(COREVIDEO) += video/out/vo_corevideo.m
SOURCES-$(DIRECT3D) += video/out/vo_direct3d.c \
video/out/w32_common.c
SOURCES-$(DSOUND) += audio/out/ao_dsound.c
ao_wasapi0: add new wasapi event mode ao
2013-06-13 15:15:39 +02:00
SOURCES-$(WASAPI0) += audio/out/ao_wasapi0.c
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
SOURCES-$(GL) += video/out/gl_common.c video/out/gl_osd.c \
vo_opengl: split into multiple files, convert to new option API gl_video.c contains all rendering code, gl_lcms.c the .icc loader and creation of 3D LUT (and all LittleCMS specific code). vo_opengl.c is reduced to interfacing between the various parts.
2013-03-01 21:19:20 +01:00
video/out/vo_opengl.c video/out/gl_lcms.c \
gl_video: improve dithering Use a different algorithm to generate the dithering matrix. This looks much better than the previous ordered dither matrix with its cross-hatch artifacts. The matrix generation algorithm as well as its implementation was contributed by Wessel Dankers aka Fruit. The code in dither.c is his implementation, reformatted and with static global variables removed by me. The new matrix is uploaded as float texture - before this commit, it was a normal integer fixed point matrix. This means dithering will be disabled on systems without float textures. The size of the dithering matrix can be configured, as the matrix is generated at runtime. The generation of the matrix can take rather long, and is already unacceptable with size 8. The default is at 6, which takes about 100 ms on a Core2 Duo system with dither.c compiled at -O2, which I consider just about acceptable. The old ordered dithering is still available and can be selected by putting the dither=ordered sub-option. The ordered dither matrix generation code was moved to dither.c. This function was originally written by Uoti Urpala.
2013-05-26 01:48:39 +02:00
video/out/gl_video.c video/out/dither.c \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
video/out/vo_opengl_old.c \
video/out/pnm_loader.c
SOURCES-$(ENCODING) += video/out/vo_lavc.c audio/out/ao_lavc.c \
core/encode_lavc.c
gl_common: split into platform specific files Do this instead of stuffing all x11/cocoa/win32/wayland specific code into gl_common.c. The cocoa specific parts could probably go directly into cocoa_common.m, possibly same with wayland. Also redo how the list of backends is managed. Get rid of the GLTYPE_ constants. Instead of having a big switch() on GLTYPE_, each backend entry has a function pointer to setup the MPGLContext callback (e.g. mpgl_set_backend_x11()).
2013-03-01 15:55:08 +01:00
SOURCES-$(GL_WIN32) += video/out/w32_common.c video/out/gl_w32.c
SOURCES-$(GL_X11) += video/out/x11_common.c video/out/gl_x11.c
SOURCES-$(GL_COCOA) += video/out/gl_cocoa.c
SOURCES-$(GL_WAYLAND) += video/out/wayland_common.c \
video/out/gl_wayland.c
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
SOURCES-$(JACK) += audio/out/ao_jack.c
SOURCES-$(JOYSTICK) += core/input/joystick.c
core: rename mplayer.h and quvi.c mplayer.h used to be used for much more stuff, but all what is left are quvi related definitions. Rename quvi.c as well to make its purpose clearer.
2013-06-27 18:20:59 +02:00
SOURCES-$(LIBQUVI) += core/resolve_quvi.c
core: add libquvi 0.9 support This adds support for libquvi 0.9.x, and these features: - start time (part of youtube URL) - youtube subtitles - alternative source switching ('l' and 'L' keys) - youtube playlists Note that libquvi 0.9 is still in development. Although this seems to be API stable now, it looks like there will be a 1.0 release, which is supposed to be the next stable release and the actual successor of libquvi 0.4.x.
2013-06-27 18:21:07 +02:00
SOURCES-$(LIBQUVI9) += core/resolve_quvi9.c
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
SOURCES-$(LIRC) += core/input/lirc.c
SOURCES-$(OPENAL) += audio/out/ao_openal.c
SOURCES-$(OSS) += audio/out/ao_oss.c
SOURCES-$(PULSE) += audio/out/ao_pulse.c
SOURCES-$(PORTAUDIO) += audio/out/ao_portaudio.c
SOURCES-$(RSOUND) += audio/out/ao_rsound.c
SOURCES-$(VDPAU) += video/out/vo_vdpau.c
SOURCES-$(X11) += video/out/vo_x11.c video/out/x11_common.c
SOURCES-$(XV) += video/out/vo_xv.c
vf_lavfi: add libavfilter bridge Requires recent FFmpeg/Libav git versions. Earlier versions will not be supported, as the API is different. (A libavfilter version that uses AVFrame instead of AVFilterBuffer is needed.) Note that this is sort of useless, because the option parser prevents you from making use of the full libavfilter graph syntax. This has to be fixed later. Most of the filter creation code (half of the config() function) has been taken from avplay.c. This code is not based on MPlayer's vf_lavfi. The MPlayer code doesn't compile as it hasn't been updated through multiple libavfilter API changes, making it completely useless as a starting point.
2013-03-11 00:16:34 +01:00
SOURCES-$(VF_LAVFI) += video/filter/vf_lavfi.c
af_lavfi: add libavfilter bridge Mostly copied from vf_lavfi. The parts that could be shared are minor, because most code is about setting up audio and video, which are too different. This won't work with Libav. I used ffplay.c as guide, and noticed too late that their setup methods are incompatible with Libav's. Trying to make it work with both would be too much effort. The configure test for av_opt_set_int_list() should disable af_lavfi gracefully when compiling with Libav. Due to option parser chaos, you currently can't have a "," as part of the filter graph string - not even with quoting or escaping. This will probably be fixed later. The audio filter chain is not PTS aware. So we have to do some hacks to make up a fake PTS, and we have to map the output PTS back to the filter chain's method of tracking PTS changes and buffering, by adjusting af->delay.
2013-05-23 15:11:57 +02:00
SOURCES-$(AF_LAVFI) += audio/filter/af_lavfi.c
vf_lavfi: add libavfilter bridge Requires recent FFmpeg/Libav git versions. Earlier versions will not be supported, as the API is different. (A libavfilter version that uses AVFrame instead of AVFilterBuffer is needed.) Note that this is sort of useless, because the option parser prevents you from making use of the full libavfilter graph syntax. This has to be fixed later. Most of the filter creation code (half of the config() function) has been taken from avplay.c. This code is not based on MPlayer's vf_lavfi. The MPlayer code doesn't compile as it hasn't been updated through multiple libavfilter API changes, making it completely useless as a starting point.
2013-03-11 00:16:34 +01:00
video: make use of libavcodec refcounting Now lavc_dr1.c is not used anymore if libavcodec is recent enough.
2013-03-09 20:50:06 +01:00
ifeq ($(HAVE_AVUTIL_REFCOUNTING),no)
SOURCES-yes += video/decode/lavc_dr1.c
endif
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
build: change vf_dlopen test Didn't work on Windows. Apparently, WIN32 is not set in the Makefile.
2013-07-12 18:33:39 +02:00
SOURCES-$(DLOPEN) += video/filter/vf_dlopen.c
configure: add libdl detection to ladspa, vf_dlopen
2013-07-09 09:28:05 +02:00
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
SOURCES = talloc.c \
audio: add some setters for mp_audio, and require filters to use them mp_audio has some redundant fields. Setters like mp_audio_set_format() initialize these properly. Also move the mp_audio struct to a the file audio.c. We can remove a mysterious line of code from af.c: in.format |= af_bits2fmt(in.bps * 8); I'm not sure if this was ever actually needed, or if it was some kind of "make it work" quick-fix that works against the way things were supposed to work. All filters etc. now set the format correctly, so if there ever was a need for this code, it's definitely gone.
2013-04-05 19:47:51 +02:00
audio/audio.c \
audio: add channel map API Unused, will be used in the following commits. Let chmap.h define the number of maximum channels, because that is most convenient.
2013-04-05 15:25:09 +02:00
audio/chmap.c \
audio: add channel map selection function The point is selecting a minimal fallback. The AOs will call this through the AO API, so it will be possible to add options affecting the general channel layout selection. It provides the following mechanism to AOs: - forcing the correct channel order - downmixing to stereo if no layout is available - allow 5.1 <-> 5.1(side) fallback - handling "unknown" channel layouts This is quite weak and lots of code/complexity for little gain. All AOs already made sure the channel order was correct, and the fallback is of little value, and could perhaps be done in the frontend instead, like stereo downmixing with --channels=2 is handled. But I'm not really sure how this stuff should _really_ work, and the new code will hopefully provides enough flexibility to make radical changes to channel layout negotiation easier.
2013-05-09 15:12:16 +02:00
audio/chmap_sel.c \
ad_lavc: use fmt-conversion to map sample formats
2012-11-03 14:06:53 +01:00
audio/fmt-conversion.c \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
audio/format.c \
audio/mixer.c \
audio/reorder_ch.c \
audio/decode/ad.c \
audio/decode/ad_lavc.c \
audio/decode/ad_spdif.c \
audio/decode/dec_audio.c \
audio/filter/af.c \
audio/filter/af_center.c \
audio/filter/af_channels.c \
audio/filter/af_delay.c \
audio/filter/af_dummy.c \
audio/filter/af_equalizer.c \
audio/filter/af_extrastereo.c \
audio/filters: add af_force Its main purpose is for testing in case channel layout stuff breaks, in particular in connection with old audio filters.
2013-05-09 12:09:23 +02:00
audio/filter/af_force.c \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
audio/filter/af_format.c \
audio/filter/af_hrtf.c \
audio/filter/af_karaoke.c \
audio/filter/af_lavcac3enc.c \
af_lavrresample: add new resampling filter to replace the old ones Remove `af_resample` and `af_lavcresample`. The former is a mess while the latter uses an API that was long deprecated in libavcodec and is now removed. `af_lavrresample` rougly has the same features and structure of `af_lavcresample`. libswresample fallback by wm4.
2013-03-09 09:30:26 +01:00
audio/filter/af_lavrresample.c \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
audio/filter/af_pan.c \
audio/filter/af_scaletempo.c \
audio/filter/af_sinesuppress.c \
audio/filter/af_sub.c \
audio/filter/af_surround.c \
audio/filter/af_sweep.c \
audio/filter/af_tools.c \
Rename af_volnorm to af_drc The previous name of this filter was misleading, because it doesn’t actually normalize volume levels. What it does is closer to performing low-quality dynamic range compression, hence it is now called af_drc.
2013-02-12 09:53:33 +01:00
audio/filter/af_drc.c \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
audio/filter/af_volume.c \
audio/filter/filter.c \
audio/filter/window.c \
audio/out/ao.c \
audio/out/ao_null.c \
audio/out/ao_pcm.c \
core/asxparser.c \
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
core/av_common.c \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
core/av_log.c \
core/av_opts.c \
core/bstr.c \
sub: add subtitle charset conversion This code was once part of subreader.c, then traveled to libass, and now made its way back to the fork of the fork of the original code, MPlayer. It works pretty much the same as subreader.c, except that we have to concatenate some packets to do auto-detection. This is rather annoying, but for all we know the actual source file could be a binary format. Unlike subreader.c, the iconv context is reopened on each packet. This is simpler, and with respect to multibyte encodings, more robust. Reopening is probably not a very fast, but I suspect subtitle charset conversion is not an operation that happens often or has to be fast. Also, this auto-detection is disabled for microdvd - this is the only format we know that has binary data in its packets, but is actually decoded to text. FFmpeg doesn't really allow us to solve this properly, because a) the input packets can be binary, and b) the output will be checked whether it's UTF-8, and if it's not, the output is thrown away and an error message is printed. We could just recode the decoded subtitles before sd_ass if it weren't for that.
2013-06-23 22:15:04 +02:00
core/charset_conv.c \
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
core/codecs.c \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
core/command.c \
core/cpudetect.c \
core/m_config.c \
core/m_option.c \
core/m_property.c \
core/m_struct.c \
core/mp_common.c \
core/mp_msg.c \
core: add a spsc ringbuffer implementation Currently every single AO was implementing it's own ringbuffer, many times with slightly different semantics. This is an attempt to fix the problem. I stole some good ideas from ao_portaudio's ringbuffer and went from there. The main difference is this one stores wpos and rpos which are absolute positions in an "infinite" buffer. To find the actual position for writing / reading just apply modulo size. The producer only modifies wpos while the consumer only modifies rpos. This makes it pretty easy to reason about and make the operations thread safe by using barriers (thread safety is guaranteed only in the Single-Producer/Single- Consumer case). Also adapted ao_coreaudio to use this ringbuffer.
2013-05-23 21:23:32 +02:00
core/mp_ring.c \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
core/mplayer.c \
core: make options.c compile standalone This also removes the split between "mplayer" and "common" opts (common opts used to be shared between mencoder and mplayer).
2013-06-07 22:57:00 +02:00
core/options.c \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
core/parser-cfg.c \
core/parser-mpcmd.c \
core/path.c \
core/playlist.c \
core/playlist_parser.c \
core/screenshot.c \
core/subopt-helper.c \
core/version.c \
core/input/input.c \
core/timeline/tl_edl.c \
core/timeline/tl_matroska.c \
core/timeline/tl_cue.c \
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
demux/codec_tags.c \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
demux/demux.c \
demux/demux_edl.c \
demux/demux_cue.c \
demux/demux_lavf.c \
demux/demux_mf.c \
demux/demux_mkv.c \
Move/rename subreader.c
2013-06-21 00:26:05 +02:00
demux/demux_subreader.c \
demux_rawvideo/demux_rawaudio: move both demuxers to demux_raw.c This allows them to share some trivial code. Both demuxers are still separate from user perspective.
2013-07-12 22:52:10 +02:00
demux/demux_raw.c \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
demux/ebml.c \
demux/mf.c \
osdep/io.c \
timer: refactor, add 64 bit timer function Make OS specific timer code export a mp_raw_time_us() function, and add generic implementations of GetTimer()/GetTimerMS() using this function. New mpv code is supposed to call mp_time_us() in situations where precision is absolutely needed, or mp_time_s() otherwise. Make it so that mp_time_us() will return a value near program start. We don't set it to 0 though to avoid confusion with relative vs. absolute time. Instead, pick an arbitrary offset. Move the test program in timer-darwin.c to timer.c, and modify it to work with the generic timer functions.
2013-05-17 19:54:37 +02:00
osdep/numcores.c \
osdep/timer.c \
Remove internal network support This commit removes the "old" networking code in favor of libavformat's code. The code was still used for mp_http, udp, ftp, cddb. http has been mapped to libavformat's http support since approximately 6 months ago. udp and ftp have support in ffmpeg (though ftp was added only last month). cddb support is removed with this commit - it's probably not important and rarely used if at all, so we don't care about it.
2013-07-07 19:40:14 +02:00
stream/cookies.c \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
stream/stream.c \
demux_lavf: add support for libavdevice libavdevice supports various "special" video and audio inputs, such as screen-capture or libavfilter filter graphs. libavdevice inputs are implemented as demuxers. They don't use the custom stream callbacks (in AVFormatContext.pb). Instead, input parameters are passed as filename. This means the mpv stream layer has to be disabled. Do this by adding the pseudo stream handler avdevice://, whose only purpose is passing the filename to demux_lavf, without actually doing anything. Change the logic how the filename is passed to libavformat. Remove handling of the filename from demux_open_lavf() and move it to lavf_check_file(). (This also fixes a possible bug when skipping the "lavf://" prefix.) libavdevice now can be invoked by specifying demuxer and args as in: mpv avdevice://demuxer:args The args are passed as filename to libavformat. When using libavdevice demuxers, their actual meaning is highly implementation specific. They don't refer to actual filenames. Note: libavdevice is disabled by default. There is one problem: libavdevice pulls in libavfilter, which in turn causes symbol clashes with mpv internals. The problem is that libavfilter includes a mplayer filter bridge, which is used to interface with a set of nearly unmodified mplayer filters copied into libavfilter. This filter bridge uses the same symbol names as mplayer/mpv's filter chain, which results in symbol clashes at link-time. This can be prevented by building ffmpeg with --disable-filter=mp, but unfortunately this is not the default. This means linking to libavdevice (which in turn forces linking with libavfilter by default) must be disabled. We try doing this by compiling a test file that defines one of the clashing symbols (vf_mpi_clear). To enable libavdevice input, ffmpeg should be built with the options: --disable-filter=mp and mpv with: --enable-libavdevice Originally, I tried to auto-detect it. But the resulting complications in configure did't seem worth the trouble.
2012-11-30 18:41:04 +01:00
stream/stream_avdevice.c \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
stream/stream_file.c \
stream/stream_lavf.c \
stream: redo memory streams Make memory streams actual streams. This causes fewer weird corner cases and actually allows using demuxers with them.
2013-06-27 17:21:46 +02:00
stream/stream_memory.c \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
stream/stream_mf.c \
stream/stream_null.c \
sub/dec_sub.c \
sub/draw_bmp.c \
sub/find_subfiles.c \
sub/img_convert.c \
sub/sd_lavc.c \
sub: make use of libavcodec subtitle converters This allows using some formats that were not supported until now, like WebVTT. We still prefer the internal subtitle reader (subreader.c), because 1. Libav, and 2. random things which we probably want to keep, such as control over formatting, codepage stuff, or various mysterious postprecessing done in that code.
2013-06-01 19:54:31 +02:00
sub/sd_lavc_conv.c \
sub: add hack for Libav SRT demuxer Before this commit, SRT demuxing and display actually happened to work on Libav. But it was using the libavcodec srt converter (which is essentially unmaintained in Libav), and timing postprocessing didn't work. For some background explanations see sd_lavf_srt.c.
2013-06-24 02:06:55 +02:00
sub/sd_lavf_srt.c \
sub: split subassconvert.c into sd_microdvd.c and sd_srt.c
2013-06-01 19:50:46 +02:00
sub/sd_microdvd.c \
sub: basic subtitle converters Add a basic infrastructure for subtitle converters. These converters work sort-of like decoders, except that they produce packets instead of subtitle bitmaps. They are put in front of actual decoders. Start with sd_movtext. 4 lines of code are blown up to a 55 lines file, but fortunately this is not going to be that bad for the following converters.
2013-06-01 19:44:55 +02:00
sub/sd_movtext.c \
sub: add sd_spu.c to wrap spudec, cleanup mplayer.c This unifies the subtitle rendering path. Now all subtitle rendering goes through sd_ass.c/sd_lavc.c/sd_spu.c. Before that commit, the spudec.h functions were used directly in mplayer.c, which introduced many special cases. Add sd_spu.c, which is just a small wrapper connecting the new subtitle render API with the dusty old vobsub decoder in spudec.c. One detail that changes is that we always pass the palette as extra data, instead of passing the libdvdread palette as pointer to spudec directly. This is a bit roundabout, but actually makes the code simpler and more elegant: the difference between DVD and non-DVD dvdsubs is reduced. Ideally, we would just delete spudec.c and use libavcodec's DVD sub decoder. However, DVD playback with demux_mpg produces packets incompatible to lavc. There are incompatibilities the other way around as well: packets from libavformat's vobsub demuxer are incompatible to spudec.c. So we define a new subtitle codec name for demux_mpg subs, "dvd_subtitle_mpg", which only sd_spu can decode. There is actually code in spudec.c to "assemble" fragments into complete packets, but using the whole spudec.c is easier than trying to move this code into demux_mpg to fix subtitle packets. As additional complication, Libav 9.x can't decode DVD subs correctly, so use sd_spu in that case as well.
2013-04-29 01:13:22 +02:00
sub/sd_spu.c \
sub: split subassconvert.c into sd_microdvd.c and sd_srt.c
2013-06-01 19:50:46 +02:00
sub/sd_srt.c \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
sub/spudec.c \
sub/sub.c \
video/csputils.c \
video/fmt-conversion.c \
video/image_writer.c \
video/img_format.c \
video/mp_image.c \
mp_image_pool: add pool to avoid frequent image reallocations Refcounting will conceptually allocate and free images all the time when using the filter chain. Add a pool that makes these reallocations cheap. This only affects the image data, not mp_image structs and similar small allocations. Small allocations are always fast with reasonable memory managers, while large image data will trigger mmap/munmap calls each time.
2012-12-12 23:55:34 +01:00
video/mp_image_pool.c \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
video/sws_utils.c \
video/decode/dec_video.c \
video/decode/vd.c \
video/decode/vd_lavc.c \
video/filter/vf.c \
video/filter/pullup.c \
video/filter/vf_crop.c \
video/filter/vf_delogo.c \
video/filter/vf_divtc.c \
video/filter/vf_down3dright.c \
video/filter/vf_dsize.c \
video/filter: rename vf_eq2 to vf_eq vf_eq was deleted earlier, which makes the name vf_eq2 even more awkward.
2012-11-15 15:16:12 +01:00
video/filter/vf_eq.c \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
video/filter/vf_expand.c \
video/filter/vf_flip.c \
video/filter/vf_format.c \
video/filter/vf_gradfun.c \
video/filter/vf_hqdn3d.c \
video/filter/vf_ilpack.c \
video/filter/vf_mirror.c \
video/filter/vf_noformat.c \
video/filter/vf_noise.c \
video/filter/vf_phase.c \
video/filter/vf_pullup.c \
video/filter/vf_rotate.c \
video/filter/vf_scale.c \
video/filter/vf_screenshot.c \
video/filter/vf_softpulldown.c \
video/filter/vf_stereo3d.c \
video/filter/vf_sub.c \
video/filter/vf_swapuv.c \
video/filter/vf_unsharp.c \
video/filter/vf_vo.c \
video/filter/vf_yadif.c \
video/out/bitmap_packer.c \
video/out/aspect.c \
video/out/filter_kernels.c \
video/out/vo.c \
video/out/vo_null.c \
video/out/vo_image.c \
osdep/$(GETCH) \
osdep/$(TIMER) \
$(SOURCES-yes)
OBJECTS += $(addsuffix .o, $(basename $(SOURCES)))
OBJECTS-$(PE_EXECUTABLE) += osdep/mpv-rc.o
OBJECTS += $(OBJECTS-yes)
DEP_FILES = $(patsubst %.S,%.d,$(patsubst %.cpp,%.d,$(patsubst %.c,%.d,$(SOURCES:.m=.d) $(SOURCES:.m=.d))))
build: build manpage by default if rst2man is detected Add building the manpage to the all target (which is also the default target). This fixes the behavior that "make install" tried to build the manpage if it wasn't built yet. Add rst2man detection to configure, and disable rst2man usage in the all and install targets if it hasn't been found. You can still build or install the man page manually (by using the install-mpv-man target), but the all and install targets won't attempt to use rst2man. Additionally, building/installing the manpage by default can be explicitly inhibited using the --disable-manpage configure option. It's possible to avoid rst2man by using "make mpv install-no-man" as well.
2012-11-14 00:43:55 +01:00
ALL_TARGETS += mpv$(EXESUF)
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
Makefile: don't strip by default, add install-strip targets Now "make install" will never strip the binary. "make install-strip" always will. The behavior of --enable-debug is unchanged, other than having no influence anymore on the install targets.
2012-11-14 13:06:00 +01:00
INSTALL_BIN += install-mpv
INSTALL_BIN_STRIP += install-mpv-strip
INSTALL_MAN =
build: build manpage by default if rst2man is detected Add building the manpage to the all target (which is also the default target). This fixes the behavior that "make install" tried to build the manpage if it wasn't built yet. Add rst2man detection to configure, and disable rst2man usage in the all and install targets if it hasn't been found. You can still build or install the man page manually (by using the install-mpv-man target), but the all and install targets won't attempt to use rst2man. Additionally, building/installing the manpage by default can be explicitly inhibited using the --disable-manpage configure option. It's possible to avoid rst2man by using "make mpv install-no-man" as well.
2012-11-14 00:43:55 +01:00
ifeq ($(BUILD_MAN),yes)
Makefile: don't strip by default, add install-strip targets Now "make install" will never strip the binary. "make install-strip" always will. The behavior of --enable-debug is unchanged, other than having no influence anymore on the install targets.
2012-11-14 13:06:00 +01:00
INSTALL_MAN += install-mpv-man
ALL_TARGETS += DOCS/man/en/mpv.1
build: build manpage by default if rst2man is detected Add building the manpage to the all target (which is also the default target). This fixes the behavior that "make install" tried to build the manpage if it wasn't built yet. Add rst2man detection to configure, and disable rst2man usage in the all and install targets if it hasn't been found. You can still build or install the man page manually (by using the install-mpv-man target), but the all and install targets won't attempt to use rst2man. Additionally, building/installing the manpage by default can be explicitly inhibited using the --disable-manpage configure option. It's possible to avoid rst2man by using "make mpv install-no-man" as well.
2012-11-14 00:43:55 +01:00
endif
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Merge now redundant clean and distclean rules into the top-level Makefile. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26583 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-04-28 19:54:14 +02:00
DIRS = . \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
audio \
audio/decode \
audio/filter \
audio/out \
core \
core/input \
core/timeline \
demux \
Merge osdep/Makefile into the top-level Makefile, thus getting rid of recursive make in the osdep/ subdirectory. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26352 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-04-08 20:25:30 +02:00
osdep \
Merge stream/Makefile into top-level Makefile. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26515 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-04-24 15:38:12 +02:00
stream \
subtitles: add framework for subtitle decoders Add a framework for subtitle decoder modules that work more like audio/video decoders do, and change libass rendering of demuxed subtitles to use the new framework. The old subtitle code is messy, with details specific to handling particular subtitle types spread over high-level code. This should make it easier to clean things up and fix some bugs/limitations.
2011-01-16 19:03:08 +01:00
sub \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
video \
video/decode \
video/filter \
video/out
some makefile cleanup git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@7475 b3059339-0415-0410-9bf9-f77b7e298cf2
2002-09-22 15:04:19 +02:00
Group some variable declarations together in sensible places. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@27204 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-07-05 11:07:24 +02:00
Introduce ADDSUFFIXES function and use it to simplify the ADD_ALL_DIRS and ADD_ALL_EXESUFS functions. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@29202 b3059339-0415-0410-9bf9-f77b7e298cf2
2009-04-20 02:18:59 +02:00
ADDSUFFIXES = $(foreach suf,$(1),$(addsuffix $(suf),$(2)))
ADD_ALL_DIRS = $(call ADDSUFFIXES,$(1),$(DIRS))
ADD_ALL_EXESUFS = $(1) $(call ADDSUFFIXES,$(EXESUFS_ALL),$(1))
cosmetics: Move ADD_ALL_* functions to a more sensible place. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@29201 b3059339-0415-0410-9bf9-f77b7e298cf2
2009-04-20 02:16:53 +02:00
Makefile: show brief build output by default
2011-06-30 23:18:52 +02:00
###### brief build output #######
ifndef V
$(eval override CC = @printf "CC\t$$@\n"; $(CC))
$(eval override RM = @$(RM))
endif
Add some comment headings to divide the Makefile into logical chapters. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26708 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-05-09 19:51:44 +02:00
###### generic rules #######
build: build manpage by default if rst2man is detected Add building the manpage to the all target (which is also the default target). This fixes the behavior that "make install" tried to build the manpage if it wasn't built yet. Add rst2man detection to configure, and disable rst2man usage in the all and install targets if it hasn't been found. You can still build or install the man page manually (by using the install-mpv-man target), but the all and install targets won't attempt to use rst2man. Additionally, building/installing the manpage by default can be explicitly inhibited using the --disable-manpage configure option. It's possible to avoid rst2man by using "make mpv install-no-man" as well.
2012-11-14 00:43:55 +01:00
all: $(ALL_TARGETS)
some makefile cleanup git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@7475 b3059339-0415-0410-9bf9-f77b7e298cf2
2002-09-22 15:04:19 +02:00
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
%.1: %.rst
configure: detect rst2man binary name
2012-11-02 14:37:02 +01:00
$(RST2MAN) $< $@
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
Disable old-style implicit rules to fix MinGW/Cygwin compilation (mplayer-rc.o can not be generated). TO be improved or removed if/when someone figures out the issue. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30725 b3059339-0415-0410-9bf9-f77b7e298cf2
2010-02-24 00:33:10 +01:00
%.o: %.S
configure: Separate dependency flags from general CFLAGS Before, there was an unfortunate interaction with 'make checkheaders': Compiling a .h file would generate a .d dependency information file for that .h file as a sideeffect of compilation. Unfortunately this would clobber the .d files of the .c files with the same basename, resulting in broken dependency information when running plain make. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31614 b3059339-0415-0410-9bf9-f77b7e298cf2
2010-07-02 01:18:16 +02:00
$(CC) $(DEPFLAGS) $(CFLAGS) -c -o $@ $<
Disable old-style implicit rules to fix MinGW/Cygwin compilation (mplayer-rc.o can not be generated). TO be improved or removed if/when someone figures out the issue. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30725 b3059339-0415-0410-9bf9-f77b7e298cf2
2010-02-24 00:33:10 +01:00
Makefile, common.mak: Create .d files when creating corresponding .o The separate .d file creation logic has caused various problems, most notably cases where 'make' exits without doing anybut but without giving any error either. Change the Makefile so that .d files are always created or updated when the corresponding .o file is. This avoids the problems of current .d file generation and still gives correct dependencies. The common.mak change does the same for the libswscale build. However it does not affect the directories under ffmpeg/ because those use ffmpeg/common.mak. The MPlayer common.mak can be copied over the ffmpeg/common.mak file to make the fix apply to the FFmpeg directories too. This is not done automatically because the FFmpeg file is under version control and changing it could cause problems.
2008-12-06 03:41:45 +01:00
%.o: %.c
configure: Separate dependency flags from general CFLAGS Before, there was an unfortunate interaction with 'make checkheaders': Compiling a .h file would generate a .d dependency information file for that .h file as a sideeffect of compilation. Unfortunately this would clobber the .d files of the .c files with the same basename, resulting in broken dependency information when running plain make. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31614 b3059339-0415-0410-9bf9-f77b7e298cf2
2010-07-02 01:18:16 +02:00
$(CC) $(DEPFLAGS) $(CFLAGS) -c -o $@ $<
Merge mpcommon.mak into Makefile. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26595 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-04-29 10:53:08 +02:00
Makefile, common.mak: Create .d files when creating corresponding .o The separate .d file creation logic has caused various problems, most notably cases where 'make' exits without doing anybut but without giving any error either. Change the Makefile so that .d files are always created or updated when the corresponding .o file is. This avoids the problems of current .d file generation and still gives correct dependencies. The common.mak change does the same for the libswscale build. However it does not affect the directories under ffmpeg/ because those use ffmpeg/common.mak. The MPlayer common.mak can be copied over the ffmpeg/common.mak file to make the fix apply to the FFmpeg directories too. This is not done automatically because the FFmpeg file is under version control and changing it could cause problems.
2008-12-06 03:41:45 +01:00
%.o: %.cpp
configure: Separate dependency flags from general CFLAGS Before, there was an unfortunate interaction with 'make checkheaders': Compiling a .h file would generate a .d dependency information file for that .h file as a sideeffect of compilation. Unfortunately this would clobber the .d files of the .c files with the same basename, resulting in broken dependency information when running plain make. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31614 b3059339-0415-0410-9bf9-f77b7e298cf2
2010-07-02 01:18:16 +02:00
$(CC) $(DEPFLAGS) $(CXXFLAGS) -c -o $@ $<
Merge mpcommon.mak into Makefile. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26595 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-04-29 10:53:08 +02:00
Makefile, common.mak: Create .d files when creating corresponding .o The separate .d file creation logic has caused various problems, most notably cases where 'make' exits without doing anybut but without giving any error either. Change the Makefile so that .d files are always created or updated when the corresponding .o file is. This avoids the problems of current .d file generation and still gives correct dependencies. The common.mak change does the same for the libswscale build. However it does not affect the directories under ffmpeg/ because those use ffmpeg/common.mak. The MPlayer common.mak can be copied over the ffmpeg/common.mak file to make the fix apply to the FFmpeg directories too. This is not done automatically because the FFmpeg file is under version control and changing it could cause problems.
2008-12-06 03:41:45 +01:00
%.o: %.m
configure: Separate dependency flags from general CFLAGS Before, there was an unfortunate interaction with 'make checkheaders': Compiling a .h file would generate a .d dependency information file for that .h file as a sideeffect of compilation. Unfortunately this would clobber the .d files of the .c files with the same basename, resulting in broken dependency information when running plain make. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31614 b3059339-0415-0410-9bf9-f77b7e298cf2
2010-07-02 01:18:16 +02:00
$(CC) $(DEPFLAGS) $(CFLAGS) -c -o $@ $<
Disable old-style implicit rules to fix MinGW/Cygwin compilation (mplayer-rc.o can not be generated). TO be improved or removed if/when someone figures out the issue. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30725 b3059339-0415-0410-9bf9-f77b7e298cf2
2010-02-24 00:33:10 +01:00
Add a generic rule for .rc files and use it. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@27219 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-07-06 15:26:30 +02:00
%-rc.o: %.rc
$(WINDRES) -I. $< $@
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
mpv$(EXESUF): $(OBJECTS)
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
mpv$(EXESUF):
Get rid of COMMON_LDFLAGS variable. It was a pointless indirection. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@29784 b3059339-0415-0410-9bf9-f77b7e298cf2
2009-10-19 11:56:18 +02:00
$(CC) -o $@ $^ $(EXTRALIBS)
cosmetics: Sort things into alphabetical order in various places. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@27431 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-08-07 14:35:34 +02:00
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
core/input/input.c: core/input/input_conf.h
core/input/input_conf.h: TOOLS/file2string.pl etc/input.conf
input: replace internal key binds with included etc/input.conf The internal array of default key bindings is removed. Include the file etc/input.conf at compile time (using the file2header tool), and parse the default binds from etc/input.conf at startup time. This lowers maintainance overhead, and makes sure the default bindings and etc/input.conf don't deviate. Commit f30bf73bf22ed0542 already made sure etc/input.conf matches the default bindings, so this commit shouldn't change anything user-visible.
2012-08-01 22:52:28 +02:00
./$^ >$@
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
video/out/vo_vdpau.c: video/out/vdpau_template.c
video/out/vdpau_template.c: TOOLS/vdpau_functions.pl
build: use python3 to generate some files previously in git Some files used during build are generated with Python scripts in TOOLS/. Before, the generated files were included in the git tree. Start creating them at build time. This introduces a build-dependency on python3. The files in question are: libvo/vdpau_template.c libmpdemux/ebml_types.h libmpdemux/ebml_defs.c
2012-07-02 01:09:03 +02:00
./$< > $@
demux_mkv: support V_UNCOMPRESSED video tracks Tested with a sample generated by: ffmpeg -i in.mkv -an -vcodec rawvideo out.mkv Also add proper dependencies for the Matroska Perl stuff in Makefile.
2013-01-24 16:57:21 +01:00
MKVLIB_DEPS = TOOLS/lib/Parse/Matroska.pm \
TOOLS/lib/Parse/Matroska/Definitions.pm \
TOOLS/lib/Parse/Matroska/Element.pm \
TOOLS/lib/Parse/Matroska/Reader.pm \
TOOLS/lib/Parse/Matroska/Utils.pm \
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
demux/ebml.c demux/demux_mkv.c: demux/ebml_types.h
demux_mkv: support V_UNCOMPRESSED video tracks Tested with a sample generated by: ffmpeg -i in.mkv -an -vcodec rawvideo out.mkv Also add proper dependencies for the Matroska Perl stuff in Makefile.
2013-01-24 16:57:21 +01:00
demux/ebml_types.h: TOOLS/matroska.pl $(MKVLIB_DEPS)
build: use python3 to generate some files previously in git Some files used during build are generated with Python scripts in TOOLS/. Before, the generated files were included in the git tree. Start creating them at build time. This introduces a build-dependency on python3. The files in question are: libvo/vdpau_template.c libmpdemux/ebml_types.h libmpdemux/ebml_defs.c
2012-07-02 01:09:03 +02:00
./$< --generate-header > $@
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
demux/ebml.c: demux/ebml_defs.c
demux_mkv: support V_UNCOMPRESSED video tracks Tested with a sample generated by: ffmpeg -i in.mkv -an -vcodec rawvideo out.mkv Also add proper dependencies for the Matroska Perl stuff in Makefile.
2013-01-24 16:57:21 +01:00
demux/ebml_defs.c: TOOLS/matroska.pl $(MKVLIB_DEPS)
build: use python3 to generate some files previously in git Some files used during build are generated with Python scripts in TOOLS/. Before, the generated files were included in the git tree. Start creating them at build time. This introduces a build-dependency on python3. The files in question are: libvo/vdpau_template.c libmpdemux/ebml_types.h libmpdemux/ebml_defs.c
2012-07-02 01:09:03 +02:00
./$< --generate-definitions > $@
Fallback to builtin (generated from etc/codecs.conf at compile time) codecs.conf if no ext configfile found. Based on patch by Sidik Isani <lksi@cfht.hawaii.edu> git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@8468 b3059339-0415-0410-9bf9-f77b7e298cf2
2002-12-16 00:45:19 +01:00
vo_opengl: split into multiple files, convert to new option API gl_video.c contains all rendering code, gl_lcms.c the .icc loader and creation of 3D LUT (and all LittleCMS specific code). vo_opengl.c is reduced to interfacing between the various parts.
2013-03-01 21:19:20 +01:00
video/out/gl_video.c: video/out/gl_video_shaders.h
video/out/gl_video_shaders.h: TOOLS/file2string.pl video/out/gl_video_shaders.glsl
build: remove bin_to_header.py and use TOOLS/file2string.py instead TOOLS/file2string.py was recently added upstream, so bin_to_header.py is not needed anymore. Also fix vo_gl3.c, since file2string.py works slightly different from my script.
2012-07-28 17:31:55 +02:00
./$^ >$@
libvo: add vo_gl3 This new vo is heavily based on vo_gl.c. It provides better scale filters, dithering, and optional color management with LittleCMS2. It requires OpenGL 3. Many features are enabled by default, so it will be slower than vo_gl. However, it can be tuned to behave almost as vo_gl.
2012-03-31 01:13:38 +02:00
osd: osd_font.h -> osd_font.pfb osd_font.pfb is an actual font file extracted from osd_font.h. file2string.py is used to turn it back into a header during the build process.
2012-07-28 23:03:19 +02:00
sub/osd_libass.c: sub/osd_font.h
osd: convert OSD font to OpenType The old OSD font was a PostScript Type 1 font. Convert it to OpenType to work around a fontconfig bug [1]. OpenType is a more modern format, and the font file is quite a bit smaller, so this is actually a nice change. The conversion was done by opening the font with fontforge and saving it as OpenType (CFF). fontforge showed a warning when doing this: The font contains errors. Self Intersecting Bad Private Dictionary These seem to be harmless. [1] https://bugs.freedesktop.org/show_bug.cgi?id=63922
2013-04-27 17:56:47 +02:00
sub/osd_font.h: TOOLS/file2string.pl sub/osd_font.otf
osd: osd_font.h -> osd_font.pfb osd_font.pfb is an actual font file extracted from osd_font.h. file2string.py is used to turn it back into a header during the build process.
2012-07-28 23:03:19 +02:00
./$^ >$@
cosmetics: Move some stuff around for more logical grouping. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26707 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-05-09 19:47:19 +02:00
# ./configure must be rerun if it changed
config.mak: configure
@echo "############################################################"
@echo "####### Please run ./configure again - it's changed! #######"
@echo "############################################################"
build: change version number generation Force Makefile to always run version.sh to potentially regenerate version.h. Drop compiler version and 'git-' prefix from version number. Match only git tags starting 'v'+number when generating version number; leave the 'v' out from the result.
2011-02-19 18:01:07 +01:00
version.h .version: version.sh
./$<
# Force version.sh to run to potentially regenerate version.h
-include .version
cosmetics: Move version.h/help_mp.h generation rules to a better place. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26594 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-04-29 10:35:58 +02:00
Makefile: Add missing '$' to EXESUF variable in binary build rule. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31401 b3059339-0415-0410-9bf9-f77b7e298cf2
2010-06-14 13:16:30 +02:00
%$(EXESUF): %.c
Makefile: Add a command to the binary build rule. This allows running the 'tests' and 'tools' targets again. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31402 b3059339-0415-0410-9bf9-f77b7e298cf2
2010-06-14 13:24:55 +02:00
$(CC) $(CFLAGS) -o $@ $^
Simplify tool generation rules with a pattern rule. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@27193 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-07-04 16:35:44 +02:00
Makefile: Move header compilation rules to the bottom of the rules list git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32042 b3059339-0415-0410-9bf9-f77b7e298cf2
2010-09-04 02:20:08 +02:00
Add some comment headings to divide the Makefile into logical chapters. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26708 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-05-09 19:51:44 +02:00
###### dependency declarations / specific CFLAGS ######
Clean up codec-cfg and friends handling. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@19056 b3059339-0415-0410-9bf9-f77b7e298cf2
2006-07-13 03:20:14 +02:00
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
core/version.c osdep/mpv-rc.o: version.h
Merge osdep/Makefile into the top-level Makefile, thus getting rid of recursive make in the osdep/ subdirectory. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26352 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-04-08 20:25:30 +02:00
build: fix compilation on Windows (manifest files)
2012-10-20 16:45:05 +02:00
osdep/mpv-rc.o: osdep/mpv.exe.manifest
Windows support: add a manifest file Add a manifest file to disable file and registry "virtualization" on Windows. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31630 b3059339-0415-0410-9bf9-f77b7e298cf2
2010-07-04 09:13:18 +02:00
Makefile: add mpv.rst dependencies Using a really dumb rule declaration.
2012-11-14 00:08:25 +01:00
DOCS/man/en/mpv.1: DOCS/man/en/af.rst \
DOCS/man/en/ao.rst \
DOCS/man/en/changes.rst \
DOCS/man/en/encode.rst \
DOCS/man/en/input.rst \
DOCS/man/en/options.rst \
DOCS/man/en/vf.rst \
DOCS/man/en/vo.rst
Merge liba52/Makefile into top-level Makefile. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26554 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-04-27 13:46:56 +02:00
Update comment heading. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26895 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-05-27 13:31:57 +02:00
###### installation / clean / generic rules #######
Merge mp3lib/Makefile into top-level Makefile. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26555 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-04-28 00:53:18 +02:00
Makefile: don't strip by default, add install-strip targets Now "make install" will never strip the binary. "make install-strip" always will. The behavior of --enable-debug is unchanged, other than having no influence anymore on the install targets.
2012-11-14 13:06:00 +01:00
install: $(INSTALL_BIN) $(INSTALL_MAN)
install-no-man: $(INSTALL_BIN)
install-strip: $(INSTALL_BIN_STRIP) $(INSTALL_MAN)
install-strip-no-man: $(INSTALL_BIN_STRIP)
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
cosmetics: Reorder install targets. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22072 b3059339-0415-0410-9bf9-f77b7e298cf2
2007-01-30 12:02:19 +01:00
install-dirs:
Makefile: Don't use "install -d" on existing directories Makefile used "install -d" on directories like "/usr/local/bin". Because the install program always tries to set permissions this command causes an installation failure if the directory exists and is writable but you cannot change its permissions (default configuration for group staff on Debian for example). So avoid running such commands on existing directories.
2008-12-06 02:57:08 +01:00
if test ! -d $(BINDIR) ; then $(INSTALL) -d $(BINDIR) ; fi
Replace ifeq structure in the install target by a set of dependent targets. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22070 b3059339-0415-0410-9bf9-f77b7e298cf2
2007-01-30 12:00:54 +01:00
install-mplayer and install-mencoder targets should depend on install-dirs. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26823 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-05-18 19:16:43 +02:00
install-%: %$(EXESUF) install-dirs
Makefile: don't strip by default, add install-strip targets Now "make install" will never strip the binary. "make install-strip" always will. The behavior of --enable-debug is unchanged, other than having no influence anymore on the install targets.
2012-11-14 13:06:00 +01:00
$(INSTALL) -m 755 $< $(BINDIR)
install-%-strip: %$(EXESUF) install-dirs
$(INSTALL) -m 755 -s $< $(BINDIR)
Replace ifeq structure in the install target by a set of dependent targets. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22070 b3059339-0415-0410-9bf9-f77b7e298cf2
2007-01-30 12:00:54 +01:00
build: remove doc/locale language auto-detection, simplify This removes the rather complicated configure and Makefile parts related to auto-detecting available languages for manpages and locales. We don't have non-English manpages or any locales, so this is pointless. It didn't even work: configure --language=all created an invalid config.mak that would cause "make install" to fail. Remove installation of locales. There are no translations at all which could be installed. Should there ever be someone who is interested in adding translations, this can be added back in a simpler way. Rename the --enable-translation configure option to --enable-gettext. This is what this option really does: enable gettext() use. This may be interesting for people who want to experiment with localizing mpv, but is entirely useless for normal use. Remove detection of the binary codecs directory in configure.
2012-11-13 23:41:38 +01:00
install-mpv-man: install-mpv-man-en
cosmetics: Sort things into alphabetical order in various places. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@27431 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-08-07 14:35:34 +02:00
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
install-mpv-man-en: DOCS/man/en/mpv.1
Makefile: Don't use "install -d" on existing directories Makefile used "install -d" on directories like "/usr/local/bin". Because the install program always tries to set permissions this command causes an installation failure if the directory exists and is writable but you cannot change its permissions (default configuration for group staff on Debian for example). So avoid running such commands on existing directories.
2008-12-06 02:57:08 +01:00
if test ! -d $(MANDIR)/man1 ; then $(INSTALL) -d $(MANDIR)/man1 ; fi
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
$(INSTALL) -m 644 DOCS/man/en/mpv.1 $(MANDIR)/man1/
Replace hackish shell loops for man page installation with make constructs. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26820 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-05-18 19:05:16 +02:00
Add uninstall target, patch by Clemens Wächter <clemenswaechter@yahoo.com> git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@2386 b3059339-0415-0410-9bf9-f77b7e298cf2
2001-10-23 00:46:38 +02:00
uninstall:
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
$(RM) $(BINDIR)/mpv$(EXESUF)
$(RM) $(MANDIR)/man1/mpv.1
build: remove doc/locale language auto-detection, simplify This removes the rather complicated configure and Makefile parts related to auto-detecting available languages for manpages and locales. We don't have non-English manpages or any locales, so this is pointless. It didn't even work: configure --language=all created an invalid config.mak that would cause "make install" to fail. Remove installation of locales. There are no translations at all which could be installed. Should there ever be someone who is interested in adding translations, this can be added back in a simpler way. Rename the --enable-translation configure option to --enable-gettext. This is what this option really does: enable gettext() use. This may be interesting for people who want to experiment with localizing mpv, but is entirely useless for normal use. Remove detection of the binary codecs directory in configure.
2012-11-13 23:41:38 +01:00
$(RM) $(MANDIR)/en/man1/mpv.1
Add uninstall target, patch by Clemens Wächter <clemenswaechter@yahoo.com> git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@2386 b3059339-0415-0410-9bf9-f77b7e298cf2
2001-10-23 00:46:38 +02:00
Remove tools on distclean, not on clean. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26622 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-04-30 19:54:02 +02:00
clean:
Makefile: delete .d files in "clean" target too Previously, .d files were only deleted by "distclean" target. I see no reason why they should be kept by "clean". Delete them in that target too.
2012-07-14 06:32:57 +02:00
-$(RM) $(call ADD_ALL_DIRS,/*.o /*.d /*.a /*.ho /*~)
manpage: merge new manpage About a year ago, ubitux converted most of the old manpage from the hard to maintain nroff format to reStructuredText. This was not merged back into the master repository immediately. The argument was that the new manpage still required work to be done. However, progress was very slow. Even worse: the old manpage wasn't updated, because it was scheduled for deletion, and updating it would have meant useless work. Now the situation is that the new manpage still isn't finished, and the old manpage is grossly out of sync with the player. This is not helpful for users. Additionally, keeping the new manpage in a separate branch, while the normal development repository for code had the old manpage, was very inconvenient, because you couldn't just update the documentation in the same commit as the code. Even though the new manpage isn't finished yet, merging it now seems to be the best course of action. Squash-merge the manpage development branch [1], revision e89f5dd3f2, which branches from the mplayer2 master branch after revision 159102e0cb. Committers: * Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.) * Uoti Urpala <uau@mplayer2.org> (Many updates.) * Myself (Minor edits.) Most text of the manpage has been directly taken from the old manpage, because this is a conversion, not a complete rewrite. [1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
2012-08-02 21:37:33 +02:00
-$(RM) $(call ADD_ALL_DIRS,/*.o /*.a /*.ho /*~)
Rename to "mpv" This changes the name of this project to mpv. Most user-visible mentions of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the default config file location are changed as well. The new default config file location is: ~/.mpv/ Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI, which has been removed from mplayer2 ages ago. We don't have a logo, and the MS Windows resource files sort-of require one, so leave etc/mplayer.ico/.xpm as-is. Remove the debian and rpm packaging scripts. These contained outdated dependencies and likely were more harmful than useful. (Patches which add working and well-tested packaging are welcome.)
2012-10-11 02:04:08 +02:00
-$(RM) $(call ADD_ALL_EXESUFS,mpv)
build: remove doc/locale language auto-detection, simplify This removes the rather complicated configure and Makefile parts related to auto-detecting available languages for manpages and locales. We don't have non-English manpages or any locales, so this is pointless. It didn't even work: configure --language=all created an invalid config.mak that would cause "make install" to fail. Remove installation of locales. There are no translations at all which could be installed. Should there ever be someone who is interested in adding translations, this can be added back in a simpler way. Rename the --enable-translation configure option to --enable-gettext. This is what this option really does: enable gettext() use. This may be interesting for people who want to experiment with localizing mpv, but is entirely useless for normal use. Remove detection of the binary codecs directory in configure.
2012-11-13 23:41:38 +01:00
-$(RM) DOCS/man/en/mpv.1
Makefile: move commands from distclean to clean and add missing files There is no reason why generated source files shouldn't be part of the clean target, as opposed to distclean. On the contrary, having them in distclean only looks dangerous when trying to deal with broken dependency rules. Move them to clean, except config.h (which would require configure to be run again). Also, some recently added generated files were missing from the clean targets.
2012-08-01 23:21:55 +02:00
-$(RM) version.h
Rename directories, move files (step 2 of 2) Finish renaming directories and moving files. Adjust all include statements to make the previous commit compile. The two commits are separate, because git is bad at tracking renames and content changes at the same time. Also take this as an opportunity to remove the separation between "common" and "mplayer" sources in the Makefile. ("common" used to be shared between mplayer and mencoder.)
2012-11-09 01:06:43 +01:00
-$(RM) core/input/input_conf.h
-$(RM) video/out/vdpau_template.c
-$(RM) demux/ebml_types.h demux/ebml_defs.c
vo_opengl: split into multiple files, convert to new option API gl_video.c contains all rendering code, gl_lcms.c the .icc loader and creation of 3D LUT (and all LittleCMS specific code). vo_opengl.c is reduced to interfacing between the various parts.
2013-03-01 21:19:20 +01:00
-$(RM) video/out/gl_video_shaders.h
Makefile: move commands from distclean to clean and add missing files There is no reason why generated source files shouldn't be part of the clean target, as opposed to distclean. On the contrary, having them in distclean only looks dangerous when trying to deal with broken dependency rules. Move them to clean, except config.h (which would require configure to be run again). Also, some recently added generated files were missing from the clean targets.
2012-08-01 23:21:55 +02:00
-$(RM) sub/osd_font.h
'make clean' now recurses through subdirectories as expected, 'make dirclean' can be used to clean just the toplevel directory. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@19298 b3059339-0415-0410-9bf9-f77b7e298cf2
2006-08-03 19:31:30 +02:00
Remove QTX tests Whatever.
2012-07-28 18:32:26 +02:00
distclean: clean
Makefile: move commands from distclean to clean and add missing files There is no reason why generated source files shouldn't be part of the clean target, as opposed to distclean. On the contrary, having them in distclean only looks dangerous when trying to deal with broken dependency rules. Move them to clean, except config.h (which would require configure to be run again). Also, some recently added generated files were missing from the clean targets.
2012-08-01 23:21:55 +02:00
-$(RM) config.log config.mak config.h TAGS tags
Initial revision git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@2 b3059339-0415-0410-9bf9-f77b7e298cf2
2001-02-24 21:28:24 +01:00
allow generation of ctags and etags git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@25661 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-01-10 19:40:26 +01:00
TAGS:
Makefile: use $(RM) builtin
2011-06-30 22:12:48 +02:00
$(RM) $@; find . -name '*.[chS]' -o -name '*.asm' | xargs etags -a
allow generation of ctags and etags git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@25661 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-01-10 19:40:26 +01:00
tags:
Makefile: use $(RM) builtin
2011-06-30 22:12:48 +02:00
$(RM) $@; find . -name '*.[chS]' -o -name '*.asm' | xargs ctags -a
allow generation of ctags and etags git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@25661 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-01-10 19:40:26 +01:00
TOOLS: add script for osx bundle generation Add a make task and python script to create a Mac OS X Application Bundle to be used when compiling with the --enable-macosx-finder and --enable-macosx-bundle configure flags. The main svg icon was created by me and heavily inspired by Apple's iTunes and AppStore icon designs. We are still looking for something better. For the audio, movie and subtitles icons I added the main logo to MPlayer OSX Extended icons. Use with `make osxbundle` after running configure and make.
2012-08-13 12:08:22 +02:00
osxbundle:
@TOOLS/osxbundle.py mpv
make: add osxbundle-skip-deps This adds a way to generate a Mac OS X application bundle without the bundled dependencies. fixes #57
2013-04-08 21:44:46 +02:00
osxbundle-skip-deps:
@TOOLS/osxbundle.py --skip-deps mpv
Makefile: Rename DEPS variable to DEP_FILES git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32320 b3059339-0415-0410-9bf9-f77b7e298cf2
2010-09-20 14:07:56 +02:00
-include $(DEP_FILES)
Explicitly include dependency information in top-level Makefile. The inclusion is skipped in mpcommon.mak. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26522 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-04-24 23:58:45 +02:00
TOOLS: remove checktree.sh Nice idea, but essentially useless. Unmaintained even in mplayer-svn. Remove broken remains of the checkheaders target too.
2012-11-13 23:52:08 +01:00
.PHONY: all *install* *clean .version
Makefile: Move and comment the .SUFFIXES rule git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31528 b3059339-0415-0410-9bf9-f77b7e298cf2
2010-06-22 15:15:34 +02:00
# Disable suffix rules. Most of the builtin rules are suffix rules,
# so this saves some time on slow systems.
.SUFFIXES:
Makefile: enable .DELETE_ON_ERROR special target msgfmt creates the output file even if there was a fatal error. Thus make would stop because of the error return, but the output file would be left on disk and running make again would continue building other files. Enable the .DELETE_ON_ERROR special target to automatically delete target files changed by failing commands. This affects all rules; I think it is the correct behavior for all existing rules.
2010-11-03 23:50:44 +01:00
# If a command returns failure but changed its target file, delete the
# (presumably malformed) file. Otherwise the file would be considered to
# be up to date if make is restarted.
.DELETE_ON_ERROR:
Copy Permalink