mpv/common/av_common.c

418 lines
13 KiB
C
Raw Permalink Normal View History

core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
/*
* This file is part of mpv.
*
Relicense some non-MPlayer source files to LGPL 2.1 or later This covers source files which were added in mplayer2 and mpv times only, and where all code is covered by LGPL relicensing agreements. There are probably more files to which this applies, but I'm being conservative here. A file named ao_sdl.c exists in MPlayer too, but the mpv one is a complete rewrite, and was added some time after the original ao_sdl.c was removed. The same applies to vo_sdl.c, for which the SDL2 API is radically different in addition (MPlayer supports SDL 1.2 only). common.c contains only code written by me. But common.h is a strange case: although it originally was named mp_common.h and exists in MPlayer too, by now it contains only definitions written by uau and me. The exceptions are the CONTROL_ defines - thus not changing the license of common.h yet. codec_tags.c contained once large tables generated from MPlayer's codecs.conf, but all of these tables were removed. From demux_playlist.c I'm removing a code fragment from someone who was not asked; this probably could be done later (see commit 15dccc37). misc.c is a bit complicated to reason about (it was split off mplayer.c and thus contains random functions out of this file), but actually all functions have been added post-MPlayer. Except get_relative_time(), which was written by uau, but looks similar to 3 different versions of something similar in each of the Unix/win32/OSX timer source files. I'm not sure what that means in regards to copyright, so I've just moved it into another still-GPL source file for now. screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but they're all gone.
2016-01-19 18:36:06 +01:00
* mpv is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
*
* mpv is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
Relicense some non-MPlayer source files to LGPL 2.1 or later This covers source files which were added in mplayer2 and mpv times only, and where all code is covered by LGPL relicensing agreements. There are probably more files to which this applies, but I'm being conservative here. A file named ao_sdl.c exists in MPlayer too, but the mpv one is a complete rewrite, and was added some time after the original ao_sdl.c was removed. The same applies to vo_sdl.c, for which the SDL2 API is radically different in addition (MPlayer supports SDL 1.2 only). common.c contains only code written by me. But common.h is a strange case: although it originally was named mp_common.h and exists in MPlayer too, by now it contains only definitions written by uau and me. The exceptions are the CONTROL_ defines - thus not changing the license of common.h yet. codec_tags.c contained once large tables generated from MPlayer's codecs.conf, but all of these tables were removed. From demux_playlist.c I'm removing a code fragment from someone who was not asked; this probably could be done later (see commit 15dccc37). misc.c is a bit complicated to reason about (it was split off mplayer.c and thus contains random functions out of this file), but actually all functions have been added post-MPlayer. Except get_relative_time(), which was written by uau, but looks similar to 3 different versions of something similar in each of the Unix/win32/OSX timer source files. I'm not sure what that means in regards to copyright, so I've just moved it into another still-GPL source file for now. screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but they're all gone.
2016-01-19 18:36:06 +01:00
* GNU Lesser General Public License for more details.
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
*
Relicense some non-MPlayer source files to LGPL 2.1 or later This covers source files which were added in mplayer2 and mpv times only, and where all code is covered by LGPL relicensing agreements. There are probably more files to which this applies, but I'm being conservative here. A file named ao_sdl.c exists in MPlayer too, but the mpv one is a complete rewrite, and was added some time after the original ao_sdl.c was removed. The same applies to vo_sdl.c, for which the SDL2 API is radically different in addition (MPlayer supports SDL 1.2 only). common.c contains only code written by me. But common.h is a strange case: although it originally was named mp_common.h and exists in MPlayer too, by now it contains only definitions written by uau and me. The exceptions are the CONTROL_ defines - thus not changing the license of common.h yet. codec_tags.c contained once large tables generated from MPlayer's codecs.conf, but all of these tables were removed. From demux_playlist.c I'm removing a code fragment from someone who was not asked; this probably could be done later (see commit 15dccc37). misc.c is a bit complicated to reason about (it was split off mplayer.c and thus contains random functions out of this file), but actually all functions have been added post-MPlayer. Except get_relative_time(), which was written by uau, but looks similar to 3 different versions of something similar in each of the Unix/win32/OSX timer source files. I'm not sure what that means in regards to copyright, so I've just moved it into another still-GPL source file for now. screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but they're all gone.
2016-01-19 18:36:06 +01:00
* You should have received a copy of the GNU Lesser General Public
* License along with mpv. If not, see <http://www.gnu.org/licenses/>.
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
*/
#include <assert.h>
#include <math.h>
#include <limits.h>
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
2013-02-14 14:02:47 +01:00
#include <libavutil/common.h>
#include <libavutil/log.h>
#include <libavutil/dict.h>
#include <libavutil/opt.h>
#include <libavutil/error.h>
#include <libavutil/cpu.h>
#include <libavcodec/avcodec.h>
#include <libavformat/avformat.h>
2013-02-14 14:02:47 +01:00
#include "config.h"
#include "audio/chmap_avchannel.h"
#include "common/common.h"
#include "common/msg.h"
#include "demux/packet.h"
#include "demux/stheader.h"
#include "misc/bstr.h"
#include "video/fmt-conversion.h"
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
#include "av_common.h"
#include "codecs.h"
enum AVMediaType mp_to_av_stream_type(int type)
{
switch (type) {
case STREAM_VIDEO: return AVMEDIA_TYPE_VIDEO;
case STREAM_AUDIO: return AVMEDIA_TYPE_AUDIO;
case STREAM_SUB: return AVMEDIA_TYPE_SUBTITLE;
default: return AVMEDIA_TYPE_UNKNOWN;
}
}
AVCodecParameters *mp_codec_params_to_av(const struct mp_codec_params *c)
{
AVCodecParameters *avp = avcodec_parameters_alloc();
if (!avp)
return NULL;
// If we have lavf demuxer params, they overwrite by definition any others.
if (c->lav_codecpar) {
if (avcodec_parameters_copy(avp, c->lav_codecpar) < 0)
goto error;
return avp;
}
avp->codec_type = mp_to_av_stream_type(c->type);
avp->codec_id = mp_codec_to_av_codec_id(c->codec);
avp->codec_tag = c->codec_tag;
if (c->extradata_size) {
uint8_t *extradata = c->extradata;
int size = c->extradata_size;
if (avp->codec_id == AV_CODEC_ID_FLAC) {
// ffmpeg expects FLAC extradata to be just the STREAMINFO,
// so grab only that (and assume it'll be the first block)
if (size >= 8 && !memcmp(c->extradata, "fLaC", 4)) {
extradata += 8;
size = MPMIN(34, size - 8); // FLAC_STREAMINFO_SIZE
}
}
avp->extradata = av_mallocz(size + AV_INPUT_BUFFER_PADDING_SIZE);
if (!avp->extradata)
goto error;
avp->extradata_size = size;
memcpy(avp->extradata, extradata, size);
}
avp->bits_per_coded_sample = c->bits_per_coded_sample;
// Video only
avp->width = c->disp_w;
avp->height = c->disp_h;
// Audio only
avp->sample_rate = c->samplerate;
avp->bit_rate = c->bitrate;
avp->block_align = c->block_align;
#if !HAVE_AV_CHANNEL_LAYOUT
avp->channels = c->channels.num;
if (!mp_chmap_is_unknown(&c->channels))
avp->channel_layout = mp_chmap_to_lavc(&c->channels);
#else
mp_chmap_to_av_layout(&avp->ch_layout, &c->channels);
#endif
return avp;
error:
avcodec_parameters_free(&avp);
return NULL;
}
// Set avctx codec headers for decoding. Returns <0 on failure.
int mp_set_avctx_codec_headers(AVCodecContext *avctx, const struct mp_codec_params *c)
{
enum AVMediaType codec_type = avctx->codec_type;
enum AVCodecID codec_id = avctx->codec_id;
AVCodecParameters *avp = mp_codec_params_to_av(c);
if (!avp)
return -1;
int r = avcodec_parameters_to_context(avctx, avp) < 0 ? -1 : 0;
avcodec_parameters_free(&avp);
if (avctx->codec_type != AVMEDIA_TYPE_UNKNOWN)
avctx->codec_type = codec_type;
if (avctx->codec_id != AV_CODEC_ID_NONE)
avctx->codec_id = codec_id;
return r;
}
// Pick a "good" timebase, which will be used to convert double timestamps
// back to fractions for passing them through libavcodec.
AVRational mp_get_codec_timebase(const struct mp_codec_params *c)
{
AVRational tb = {c->native_tb_num, c->native_tb_den};
if (tb.num < 1 || tb.den < 1) {
if (c->reliable_fps)
tb = av_inv_q(av_d2q(c->fps, 1000000));
if (tb.num < 1 || tb.den < 1)
tb = AV_TIME_BASE_Q;
}
// If the timebase is too coarse, raise its precision, or small adjustments
// to timestamps done between decoder and demuxer could be lost.
int64_t den = tb.den;
if (av_q2d(tb) > 0.001) {
int64_t scaling_num = tb.num * INT64_C(1000);
int64_t scaling_den = tb.den;
den *= (scaling_num + scaling_den - 1) / scaling_den;
}
av_reduce(&tb.num, &tb.den, tb.num, den, INT_MAX);
if (tb.num < 1 || tb.den < 1)
tb = AV_TIME_BASE_Q;
return tb;
}
static AVRational get_def_tb(AVRational *tb)
{
return tb && tb->num > 0 && tb->den > 0 ? *tb : AV_TIME_BASE_Q;
}
// Convert the mpv style timestamp (seconds as double) to a libavcodec style
// timestamp (integer units in a given timebase).
int64_t mp_pts_to_av(double mp_pts, AVRational *tb)
{
AVRational b = get_def_tb(tb);
return mp_pts == MP_NOPTS_VALUE ? AV_NOPTS_VALUE : llrint(mp_pts / av_q2d(b));
}
// Inverse of mp_pts_to_av(). (The timebases must be exactly the same.)
double mp_pts_from_av(int64_t av_pts, AVRational *tb)
{
AVRational b = get_def_tb(tb);
return av_pts == AV_NOPTS_VALUE ? MP_NOPTS_VALUE : av_pts * av_q2d(b);
}
// Set dst from mpkt. Note that dst is not refcountable.
// mpkt can be NULL to generate empty packets (used to flush delayed data).
// Sets pts/dts using mp_pts_to_av(ts, tb). (Be aware of the implications.)
// Set duration field only if tb is set.
void mp_set_av_packet(AVPacket *dst, struct demux_packet *mpkt, AVRational *tb)
{
ffmpeg: update to handle deprecation of `av_init_packet` This has been a long standing annoyance - ffmpeg is removing sizeof(AVPacket) from the API which means you cannot stack-allocate AVPacket anymore. However, that is something we take advantage of because we use short-lived AVPackets to bridge from native mpv packets in our main decoding paths. We don't think that switching these to `av_packet_alloc` is desirable, given the cost of heap allocation, so this change takes a different approach - allocating a single packet in the relevant context and reusing it over and over. That's fairly straight-forward, with the main caveat being that re-initialising the packet is unintuitive. There is no function that does exactly what we need (what `av_init_packet` did). The closest is `av_packet_unref`, which additionally frees buffers and side-data. However, we don't copy those things - we just assign them in from our own packet, so we have to explicitly clear the pointers before calling `av_packet_unref`. But at least we can make a wrapper function for that. The weirdest part of the change is the handling of the vtt subtitle conversion. This requires two packets, so I had to pre-allocate two in the context struct. That sounds excessive, but if allocating the primary packet is too expensive, then allocating the secondary one for vtt subtitles must also be too expensive. This change is not conditional as heap allocated AVPackets were available for years and years before the deprecation.
2022-11-29 20:15:16 +01:00
dst->side_data = NULL;
dst->side_data_elems = 0;
dst->buf = NULL;
av_packet_unref(dst);
dst->data = mpkt ? mpkt->buffer : NULL;
dst->size = mpkt ? mpkt->len : 0;
/* Some codecs (ZeroCodec, some cases of PNG) may want keyframe info
* from demuxer. */
if (mpkt && mpkt->keyframe)
dst->flags |= AV_PKT_FLAG_KEY;
if (mpkt && mpkt->avpacket) {
dst->side_data = mpkt->avpacket->side_data;
dst->side_data_elems = mpkt->avpacket->side_data_elems;
if (dst->data == mpkt->avpacket->data)
dst->buf = mpkt->avpacket->buf;
dst->flags |= mpkt->avpacket->flags;
}
if (mpkt && tb && tb->num > 0 && tb->den > 0)
dst->duration = mpkt->duration / av_q2d(*tb);
dst->pts = mp_pts_to_av(mpkt ? mpkt->pts : MP_NOPTS_VALUE, tb);
dst->dts = mp_pts_to_av(mpkt ? mpkt->dts : MP_NOPTS_VALUE, tb);
}
void mp_set_avcodec_threads(struct mp_log *l, AVCodecContext *avctx, int threads)
{
if (threads == 0) {
threads = av_cpu_count();
if (threads < 1) {
mp_warn(l, "Could not determine thread count to use, defaulting to 1.\n");
threads = 1;
} else {
mp_verbose(l, "Detected %d logical cores.\n", threads);
if (threads > 1)
threads += 1; // extra thread for better load balancing
}
// Apparently some libavcodec versions have or had trouble with more
// than 16 threads, and/or print a warning when using > 16.
threads = MPMIN(threads, 16);
}
mp_verbose(l, "Requesting %d threads for decoding.\n", threads);
avctx->thread_count = threads;
}
static void add_codecs(struct mp_decoder_list *list, enum AVMediaType type,
bool decoders)
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
{
void *iter = NULL;
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
for (;;) {
const AVCodec *cur = av_codec_iterate(&iter);
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
if (!cur)
break;
if (av_codec_is_decoder(cur) == decoders &&
(type == AVMEDIA_TYPE_UNKNOWN || cur->type == type))
{
mp_add_decoder(list, mp_codec_from_av_codec_id(cur->id),
2013-04-04 14:11:07 +02:00
cur->name, cur->long_name);
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
}
}
}
void mp_add_lavc_decoders(struct mp_decoder_list *list, enum AVMediaType type)
{
add_codecs(list, type, true);
}
// (Abuses the decoder list data structures.)
void mp_add_lavc_encoders(struct mp_decoder_list *list)
{
add_codecs(list, AVMEDIA_TYPE_UNKNOWN, false);
}
char **mp_get_lavf_demuxers(void)
{
char **list = NULL;
void *iter = NULL;
int num = 0;
for (;;) {
const AVInputFormat *cur = av_demuxer_iterate(&iter);
if (!cur)
break;
MP_TARRAY_APPEND(NULL, list, num, talloc_strdup(NULL, cur->name));
}
MP_TARRAY_APPEND(NULL, list, num, NULL);
return list;
}
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
int mp_codec_to_av_codec_id(const char *codec)
{
int id = AV_CODEC_ID_NONE;
if (codec) {
const AVCodecDescriptor *desc = avcodec_descriptor_get_by_name(codec);
if (desc)
id = desc->id;
if (id == AV_CODEC_ID_NONE) {
const AVCodec *avcodec = avcodec_find_decoder_by_name(codec);
if (avcodec)
id = avcodec->id;
}
}
return id;
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
}
const char *mp_codec_from_av_codec_id(int codec_id)
{
const char *name = NULL;
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
const AVCodecDescriptor *desc = avcodec_descriptor_get(codec_id);
if (desc)
name = desc->name;
if (!name) {
const AVCodec *avcodec = avcodec_find_decoder(codec_id);
if (avcodec)
name = avcodec->name;
}
return name;
core: redo how codecs are mapped, remove codecs.conf Use codec names instead of FourCCs to identify codecs. Rewrite how codecs are selected and initialized. Now each decoder exports a list of decoders (and the codec it supports) via add_decoders(). The order matters, and the first decoder for a given decoder is preferred over the other decoders. E.g. all ad_mpg123 decoders are preferred over ad_lavc, because it comes first in the mpcodecs_ad_drivers array. Likewise, decoders within ad_lavc that are enumerated first by libavcodec (using av_codec_next()) are preferred. (This is actually critical to select h264 software decoding by default instead of vdpau. libavcodec and ffmpeg/avconv use the same method to select decoders by default, so we hope this is sane.) The codec names follow libavcodec's codec names as defined by AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders have names different from the canonical codec name. The AVCodecDescriptor API is relatively new, so we need a compatibility layer for older libavcodec versions for codec names that are referenced internally, and which are different from the decoder name. (Add a configure check for that, because checking versions is getting way too messy.) demux/codec_tags.c is generated from the former codecs.conf (minus "special" decoders like vdpau, and excluding the mappings that are the same as the mappings libavformat's exported RIFF tables). It contains all the mappings from FourCCs to codec name. This is needed for demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the codec as determined by libavformat, while the other demuxers have to do this on their own, using the mp_set_audio/video_codec_from_tag() functions. Note that the sh_audio/video->format members don't uniquely identify the codec anymore, and sh->codec takes over this role. Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which provide cover the functionality of the removed switched. Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure container/video combinations (e.g. the sample Film_200_zygo_pro.mov) are played flipped. ffplay/avplay doesn't handle this properly either, so we don't care and blame ffmeg/libav instead.
2013-02-09 15:15:19 +01:00
}
bool mp_codec_is_lossless(const char *codec)
{
const AVCodecDescriptor *desc =
avcodec_descriptor_get(mp_codec_to_av_codec_id(codec));
return desc && (desc->props & AV_CODEC_PROP_LOSSLESS);
}
// kv is in the format as by OPT_KEYVALUELIST(): kv[0]=key0, kv[1]=val0, ...
// Copy them to the dict.
void mp_set_avdict(AVDictionary **dict, char **kv)
{
for (int n = 0; kv && kv[n * 2]; n++)
av_dict_set(dict, kv[n * 2 + 0], kv[n * 2 + 1], 0);
}
// For use with libav* APIs that take AVDictionaries of options.
// Print options remaining in the dict as unset.
void mp_avdict_print_unset(struct mp_log *log, int msgl, AVDictionary *dict)
{
AVDictionaryEntry *t = NULL;
while ((t = av_dict_get(dict, "", t, AV_DICT_IGNORE_SUFFIX)))
mp_msg(log, msgl, "Could not set AVOption %s='%s'\n", t->key, t->value);
}
// If the name starts with "@", try to interpret it as a number, and set *name
// to the name of the n-th parameter.
static void resolve_positional_arg(void *avobj, char **name)
{
if (!*name || (*name)[0] != '@' || !avobj)
return;
char *end = NULL;
int pos = strtol(*name + 1, &end, 10);
if (!end || *end)
return;
const AVOption *opt = NULL;
int offset = -1;
while (1) {
opt = av_opt_next(avobj, opt);
if (!opt)
return;
// This is what libavfilter's parser does to skip aliases.
if (opt->offset != offset && opt->type != AV_OPT_TYPE_CONST)
pos--;
if (pos < 0) {
*name = (char *)opt->name;
return;
}
offset = opt->offset;
}
}
// kv is in the format as by OPT_KEYVALUELIST(): kv[0]=key0, kv[1]=val0, ...
// Set these options on given avobj (using av_opt_set..., meaning avobj must
// point to a struct that has AVClass as first member).
// Options which fail to set (error or not found) are printed to log.
// Returns: >=0 success, <0 failed to set an option
int mp_set_avopts(struct mp_log *log, void *avobj, char **kv)
{
return mp_set_avopts_pos(log, avobj, avobj, kv);
}
// Like mp_set_avopts(), but the posargs argument is used to resolve positional
// arguments. If posargs==NULL, positional args are disabled.
int mp_set_avopts_pos(struct mp_log *log, void *avobj, void *posargs, char **kv)
{
int success = 0;
for (int n = 0; kv && kv[n * 2]; n++) {
char *k = kv[n * 2 + 0];
char *v = kv[n * 2 + 1];
resolve_positional_arg(posargs, &k);
int r = av_opt_set(avobj, k, v, AV_OPT_SEARCH_CHILDREN);
if (r == AVERROR_OPTION_NOT_FOUND) {
mp_err(log, "AVOption '%s' not found.\n", k);
success = -1;
} else if (r < 0) {
char errstr[80];
av_strerror(r, errstr, sizeof(errstr));
mp_err(log, "Could not set AVOption %s='%s' (%s)\n", k, v, errstr);
success = -1;
}
}
return success;
}
ffmpeg: update to handle deprecation of `av_init_packet` This has been a long standing annoyance - ffmpeg is removing sizeof(AVPacket) from the API which means you cannot stack-allocate AVPacket anymore. However, that is something we take advantage of because we use short-lived AVPackets to bridge from native mpv packets in our main decoding paths. We don't think that switching these to `av_packet_alloc` is desirable, given the cost of heap allocation, so this change takes a different approach - allocating a single packet in the relevant context and reusing it over and over. That's fairly straight-forward, with the main caveat being that re-initialising the packet is unintuitive. There is no function that does exactly what we need (what `av_init_packet` did). The closest is `av_packet_unref`, which additionally frees buffers and side-data. However, we don't copy those things - we just assign them in from our own packet, so we have to explicitly clear the pointers before calling `av_packet_unref`. But at least we can make a wrapper function for that. The weirdest part of the change is the handling of the vtt subtitle conversion. This requires two packets, so I had to pre-allocate two in the context struct. That sounds excessive, but if allocating the primary packet is too expensive, then allocating the secondary one for vtt subtitles must also be too expensive. This change is not conditional as heap allocated AVPackets were available for years and years before the deprecation.
2022-11-29 20:15:16 +01:00
/**
* Must be used to free an AVPacket that was used with mp_set_av_packet().
*
* We have a particular pattern where we "borrow" buffers and set them
* into an AVPacket to pass data to ffmpeg without extra copies.
* This applies to buf and side_data, so this function clears them before
* freeing.
*/
void mp_free_av_packet(AVPacket **pkt)
{
if (*pkt) {
(*pkt)->side_data = NULL;
(*pkt)->side_data_elems = 0;
(*pkt)->buf = NULL;
}
av_packet_free(pkt);
}
void mp_codec_info_from_av(const AVCodecContext *avctx, struct mp_codec_params *c)
{
c->codec_profile = av_get_profile_name(avctx->codec, avctx->profile);
if (!c->codec_profile)
c->codec_profile = avcodec_profile_name(avctx->codec_id, avctx->profile);
c->codec = avctx->codec_descriptor->name;
c->codec_desc = avctx->codec_descriptor->long_name;
c->decoder = avctx->codec->name;
c->decoder_desc = avctx->codec->long_name;
}