* modbus: bumb pymodbus version to 2.3.0
pymodbus version 1.5.2 did not support asyncio, and in general
the async handling have been improved a lot in version 2.3.0.
updated core/requirement*txt
* updated core/CODEOWNERS
committing result of 'python3 -m script.hassfest'.
* modbus: change core connection to async
change setup() --> async_setup and update() --> async_update()
Use async_setup_platform() to complete the async connection to core.
listen for EVENT_HOMEASSISTANT_START happens in async_setup()
so it needs to be async_listen.
But listen for EVENT_HOMEASSISTANT_STOP happens in start_modbus()
which is a sync. function so it continues to be listen().
* modbus: move setup of pymodbus into modbushub
setup of pymodbus is logically connected to the class modbushub,
therefore move it into the class.
Delay construction of pymodbus client until event
EVENT_HOMEASSISTANT_START arrives.
* modbus: use pymodbus async library
convert pymodbus calls to refer to the async library.
Remark: connect() is no longer needed, it is done when constructing
the client. There are also automatic reconnect.
* modbus: use async update for read/write
Use async functions for read/write from pymodbus.
change thread.Lock() to asyncio.Lock()
* Modbus: patch for slow tcp equipment
When connecting, via Modbus-TCP, so some equipment (like the
huawei sun2000 inverter), they need time to prepare the protocol.
Solution is to add a asyncio.sleep(x) after the connect() and before
sending the first message.
Add optional parameter "delay" to Modbus configuration.
Default is 0, which means do not execute asyncio.sleep().
* Modbus: silence pylint false positive
pylint does not accept that a class construction __new__
can return a tuple.
* Modbus: move constants to const.py
Create const.py with constants only used in
the modbus integration.
Duplicate entries are removed, but NOT any entry that would
lead to a configuration change.
Some entries were the same but with different names, in this
case renaming is done.
Also correct the tests.
* Modbus: move connection error handling to ModbusHub
Connection error handling depends on the hub, not the
entity, therefore it is logical to have the handling in
ModbusHub.
All pymodbus call are added to 2 generic functions (read/write)
in order not to duplicate the error handling code.
Added property "available" to signal if the hub is connected.
* Modbus: CI cleanup
Solve CI problems.
* Modbus: remove close of client
close() no longer exist in the pymodbus library, use
del client instead.
* Modbus: correct review comments
Adjust code based on review comments.
* Modbus: remove twister dependency
Pymodbus in asyncio mode do not use twister but still throws a
warning if twister is not installed, this warning goes into
homeassistant.log and can thus cause confusion among users.
However installing twister just to avoid the warning is not
the best solution, therefore removing dependency on twister.
* Modbus: review, remove comments.
remove commented out code.
* Plum Lightpad - glowIntensity is represented as a float/percentage
Calculate brightness from the glowIntensity instead of the glowIntensity from brightness.
* Renamed `_glowIntensity` to `_glow_intensity`
* Added Rounding, converting to an int, min and max boxing
* Added codeowners to the Plum Lightpad manifest.json
* Config flow for elkm1
* As entity ids can now be changed, the “alarm_control_panel”
attribute “changed_by_entity_id” is now “changed_by_keypad”
and will show the name of the Elk keypad instead of the entity id.
* An auto configure mode has been introduced which avoids the
need to setup the complex include and exclude filters. This
functionality still exists when configuring from yaml for power
users who want more control over which entities elkm1 generates.
* restore _has_all_unique_prefixes
* preserve legacy behavior of creating alarm_control_panels that have no linked keypads when auto_configure is False
* unroll loop
* Add integration for Schluter
New integration for Schluter DITRA-HEAT thermostats. Interacts with Schluter API via py-schluter to implement climate platform.
* Fix for manifest issue on build
Removed unnecessary configurator logic
* Flake8 & ISort issues fixed
* Code review modifications for Schluter integration
- Removed unnecessary strings.json file
- Removed unnecessary DEFAULT_SCAN_INTERVAL from __init__.py
- Removed persistent notification for authentication error in __init__.py
- Removed string casts from log statements in __init__.py
- Removed unnecessary logging of entity creations in climate.py
- Removed unnecessary lookup for hvac_mode in climate.py
* Work started on Update Coordinator
* Further Coordinator work
* Update to DataUpdateCoordinator complete
* Flake8 fix
* Removal of unnecessary SchluterPlatformData
Coordinator also now using SCAN_INTERVAL
* Disable polling, use coordinator listeners
* Isort on climate.py
* Code review modifications
- Hass data stored under domain
- Since platform only likely to be climate, removed array, load explicitly
- Remove unnecessary fan mode implementation
* Switch to HVAC action for showing current heating status
* Isort fix
* HVAC Mode return list, set_hvac_mode function added
* __init__.py modifications from code review
* Climate.py code review modifications
- Device info property removed
- Write state function on set temp failure
- Add "available" property
- Delegate sync function in coordinator update to the executor
* Serial number as unique identifier
- Now using serial number & thermostat dictionary to protect against scenarios where a device is removed and enumerable index is no longer accurate
- Removed async_write_ha_state() from set temp exception, not needed
- Removed unnecessary SCAN_INTERVAL definition
* Linting
* Update homeassistant/components/schluter/climate.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/schluter/climate.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Changed timeout from config, load platform discover to None
* Proposed change for discover info issue
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* some sensors working in homeassistant
* bring up to date
* add codeowner
* update requirements
* overhaul data imports from api & sensor discovery
* remove print statement
* delete requirements_test_all
* add requrements_test_all.txt
* Update homeassistant/components/nextcloud/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Update homeassistant/components/nextcloud/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* describe recursive function
* clarify that dict is returned
* remove requirements from requirements_test_all
* improve and simplify sensor naming
* add basic tests
* restore pre-commit config
* update requirements_test_all
* remove codespell requirement
* update pre-commit-config
* add-back codespell
* rename class variables as suggested by @springstan
* add dev branch to no-commit-to-branch git hook
Because my fork had the same 'dev' branch i wasn't able to push. Going forward I should probably name my branches differently.
* move config logic to __init__.py
* restore .pre-commit-config.yaml
* remove tests
* remove nextcloud test requirement
* remove debugging code
* implement binary sensors
* restore .pre-commit-config.yaml
* bump dependency version
* bump requirements files
* bump nextcloud reqirement to latest
* update possible exceptions, use fstrings
* add list of sensors & fix inconsistency in get_data_points
* use domain for config
* fix guard clause
* repair pre-commit-config
* Remove period from logging
* include url in unique_id
* update requirements_all.txt
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* Config flow for doorbird
* Discoverable via zeroconf
* Fix zeroconf test
* add missing return
* Add a test for legacy over ride url (will go away when refactored to cloud hooks)
* Update homeassistant/components/doorbird/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* without getting the hooks its not so useful
* Update homeassistant/components/doorbird/config_flow.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* fix copy pasta
* remove identifiers since its in connections
* self review fixes
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add support for Lutron Caseta occupancy/vacancy sensors
This follows updates to pylutron-caseta to add support for these
devices. This code works for me as a custom component in Home Assistant
Core with pylutron-caseta 0.6.0 (currently unreleased).
* black formatting
* Update requirements_all.txt
* Apply black formatting
* Resolve some review comments
* serial -> unique_id
* Black formatting
* Resolve linting errors
* Add code owner...
* Fix isort complaint
* Fix remaining isort complaints
* Update codeowners
* Resolve outstanding review comments
* Remove caseta_
* Modernize nuheat for new climate platform
* Home Assistant state now mirrors the
state displayed at mynewheat.com
* Remove off mode as the device does not implement
and setting was not implemented anyways
* Implement missing set_hvac_mode for nuheat
* Now shows as unavailable when offline
* Add a unique id (serial number)
* Fix hvac_mode as it was really implementing hvac_action
* Presets now map to the open api spec
published at https://api.mynuheat.com/swagger/
* ThermostatModel: scheduleMode
* Revert test cleanup as it leaves files behind.
Its going to be more invasive to modernize the tests so
it will have to come in a new pr
* Config flow for nuheat
* codeowners
* Add an import test as well
* remove debug
* Add new integration: pvpc_hourly_pricing
to add a sensor with the current hourly price of electricity in Spain.
Configuration is done by selecting one of the 3 reference tariffs, with
1, 2, or 3 billing periods.
* Features config flow, entity registry, RestoreEntity, options flow
to change tariff, manual yaml config as integration or sensor platform
* Cloud polling sensor with minimal API calls (3/hour at random times)
and smart retry; fully async
* Only 1 state change / hour (only when the price changes)
* At evening, try to download published tomorrow prices, to always store
prices info for a window of [3, 27] hours in the future.
* Include useful state attributes to program automations to be run
at best electric prices.
* Add spanish and english translations.
* Requires `xmltodict` to parse official xml file with hourly prices
for each day.
* Update requirements and add to codeowners
* Avoid passing in hass as a parameter to the entity
Instead, create time change listeners in async_added_to_hass and
call async_generate_entity_id before async_add_entities
* Fix lint issues
* Add tests for config & options flow
* Add tests for manual yaml config
with entity definition as integration and also as a sensor platform
* Fix placement of PLATFORM_SCHEMA and update generated config_flows
* Store prices internally linked to UTC timestamps
- to deal with days with DST changes
- and work with different local timezones
* Add availability to sensor
to 'expire' the sensor if there is no connection available
and current hour is not in the stored prices.
Also, turn off logging and retrying if prices can't be downloaded
repeatedly, by flagging `data_source_available` as False, so there is no
log-flood mess.
* Add more tests
- to cover behavior in DST changes and complete coverage of sensor logic
- to cover abort config flow
* fix linter
* Better handling of sensor availability and minor enhancements
- Emmit 1 error if data source is marked as unavailable
(after some retries), and be silent until cloud access is recovered,
then emmit 1 warning.
- Follow standard of camel_case keys in attributes
* Mock aiosession to not access real API, store fixture data
- Store a set of daily xml files to test sensor logic for all situations
- Mock time and session to run tests with stored API responses
- Add availability test to simulate a lost + recovery of cloud access,
checking that logging is reasonable: 1 error to flag the continued
disconnection + 1 warning in recovery.
* Change API endpoint to retrieve JSON data
and remove xmltodict from reqs.
It seems that this endpoint is more reliable than the XML.
* Adapt tests to new API endpoint
* Translate tariff labels to plain English
and sync the default timeout value for all ways of configuration.
* Relax logging levels to meet silver requirements
- 1 warning when becoming unavailable, another warning when recovered.
- Warnings for unexpected TimeoutError or ClientError
- Move the rest to debug level, leaving info for HA internals
Also reduce number of API calls from 3 to 2 calls/hour.
* Fix requirements
* Mod tests to work with timezone Atlantic/Canary
and fix state attributes for timezones != reference, by using 3 price
prefixes: 'price_last_day_XXh', 'price_next_day_XXh' and 'price_XXh',
all generated with local time (backend timezone)
* Try to fix CI tests
* Externalize pvpc data and simplify sensor.py
* add new `aiopvpc` to requirements
* Remove data parsing and price logic from here
* Replace some constant properties with class variables
* Simplify tests for pvpc_hourly_pricing
* Fix updater for options flow
* Updater always reloads
* `tariff` value comes 1st from entry.options, 2nd from entry.data
* Fix lint
* Bump aiopvpc
* Remove options flow and platform setup
- Remove PLATFORM_SCHEMA and async_setup_platform
- Generate config_entry.unique_id with tariff instead of entity_id, in flow step.
- Remove TariffSelectorConfigFlow
- Adapt tests to maintain full coverage
* Fix docstring on test
and rename SENSOR_SCHEMA to SINGLE_SENSOR_SCHEMA to avoid confusion
* Remove timeout manual config, fix entry.options usage, simplify unique_id
* Simplify tests
- No need for a test_setup now, as platform setup is removed and integration
setup is already used in `test_availability`
- Simplified `_process_time_step`: only one async_fire(EVENT_TIME_CHANGED)/hour
* Fix possible duplicated update
when source is not available.
* Do not access State last_changed for log messages
* Do not update until entity is added to hass
and call to async_update after 1st download or when recovering access, so
async_write_ha_state is not called twice on those.
* minor changes
* Rename method to select current price and make it a callback
* Add a config flow for myq
* Discovered by homekit
* Fix gates being treated as garage doors
* Offline devices now show as unavailable
* Homekit flow
* strip out icon
* return -> raise
* Merge nexia
* Restore original work
* Merge cleanups
* config flow
* Add config flow
* Add missing files
* Fix import of old yaml config
* More cleanups from self review
* Additional self review
* Update homeassistant/components/nexia/services.yaml
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* fix io in event loop
* Update homeassistant/components/nexia/climate.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* avoid using ternary statements if they span multiple
* Cleanup strings and remove unneeded attributes
* more cleanup
* more cleanup of yaml
* remove coordinator boiler plate
* nuke services for now for the inital pr, add back later
* remove copy pasta
* this can be reduced more
* Update homeassistant/components/nexia/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* review
* comments
* Update homeassistant/components/nexia/climate.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/climate.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/nexia/climate.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* more review adjustments
* nuke unused constants
* Update homeassistant/components/nexia/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* map states
* add update
* zone id is unique
* Fix humidfy check
* target_humidity should be a property instead of in attributes
* remove aux heat as its already there
Co-authored-by: Ryan Nazaretian <ryannazaretian@gmail.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Config flow for harmony
* Fixes unique ids when using XMPP
Co-authored-by: Bram Kragten <mail@bramkragten.nl>
* Find the unique id for the config flow
* move shutdown to init
* Add test for ssdp (still failing)
* Fix ssdp test
* Add harmony to MIGRATED_SERVICE_HANDLERS (this is a breaking change)
* more cleanups
* use unique id for the config file
Co-authored-by: Bram Kragten <mail@bramkragten.nl>
* set alarmdecoder code_arm_required to False
* rm unnecessary f strings
* add code_arm_required config option
* add self as codeowner :-)
* add self as codeowner the right way
* Catch asyncio.TimeoutError, show a proper message instead
* Throttle updates to max once per 30s
* Change code owner
* Fix CODEOWNERS + linting
* Warn on connection timeout
* Do not fail when a user has a controller with shared access on their account
* Add config flow for rachio
Also discoverable via homekit
* Update homeassistant/components/rachio/switch.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Split setting the default run time to an options flow
Ensue the run time coming from yaml gets imported into the option flow
Only get the schedule once at setup instead of each zone (was hitting rate limits)
Add the config entry id to the end of the webhook so there is a unique hook per config entry
Breakout the slew of exceptions rachiopy can throw into RachioAPIExceptions
Remove the base url override as an option for the config flow
Switch identifer for device_info to serial number
Add connections to device_info (mac address)
* rename to make pylint happy
* Fix import of custom_url
* claim rachio
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add config flow to Freebox
* Add manufacturer in device_tracker info
* Add device_info to sensor + switch
* Add device_info: connections
* Add config_flow test + update .coveragerc
* Typing
* Add device_type icon
* Remove one error log
* Fix pylint
* Add myself as CODEOWNER
* Handle sync in one place
* Separate the Freebox[Router/Device/Sensor] from __init__.py
* Add link step to config flow
* Make temperature sensors auto-discovered
* Use device activity instead of reachablility for device_tracker
* Store token file in .storage
Depending on host if list of Freebox integration on the future without breaking change
* Remove IP sensors + add Freebox router as a device with attrs : IPs, conection type, uptime, version & serial
* Add sensor should_poll=False
* Test typing
* Handle devices with no name
* None is the default for data
* Fix comment
* Use config_entry.unique_id
* Add async_unload_entry with asyncio
* Add and use bunch of data size and rate related constants (#31781)
* Review
* Remove useless "already_configured" error string
* Review : merge 2 device & 2 sensor classes
* Entities from platforms
* Fix unload + add device after setup + clean loggers
* async_add_entities True
* Review
* Use pathlib + refactor get_api
* device_tracker set + tests with CoroutineMock()
* Removing active & reachable from tracker attrs
* Review
* Fix pipeline
* typing
* typing
* typing
* Raise ConfigEntryNotReady when HttpRequestError at setup
* Review
* Multiple Freebox s
* Review: store sensors in router
* Freebox: a sensor story
* Add griddy integration
* Griddy is a wholesale power provider in Texas
* Supports all four load zones in Texas
* Provides real time power price which is useful for automations to handle demand response
* Update homeassistant/components/griddy/sensor.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/griddy/config_flow.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Add ability request updated via entity update service.
* Improve error message about already configured
* Remove DEVICE_CLASS_POWER since we do not have a device class for cost
* remove setdefault that was left from previous refactor
* More detail on data naming
* Bump translation for testing
* git add the config flow tests
* s/PlatformNotReady/ConfigEntryNotReady/
* Review items
* git add the other missing file
* Patch griddypower
* reduce
* adjust target
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Breakout tado zone code into a single place
* Resolve various incorrect states and add tests for known tado zone states
* Fix home and away presets
* Upgrade to PyTado 0.4.0 which improves http performance and fixes setting fan speed.
* Write state instead of calling for an update
* adjust codeowners
* Add tests for michael's tado and fix heatingPower.value
* Guards are much cleaner
* Adjust per review
* Remove hass passing
* Emoncms API provides a Unit
The EmonCMS API has been amended to include a 'unit' as part of it's payload. By using this information, all the sensors can be created without the need for individual sensors to be setup by type.
The change is backward compatible so if a unit type has been specified in the configuration, this will be used by default.
If no unit is pecified either by the Home Assistant configuration, or the Emoncms API, then the default of W will be used as before.
* Update sensor.py
Check the 'unit' key is in the API call. Older systems may not have that key in the payload.
* Modified approach with new configuration item
* Removed new config item
Removed the configuration item. The integration attempts to get the unit from the API.
If this fails *or* the unit key of the API is blank, either the specified unit, or the default will be used.
If approved, documentation will be updated.
* Update homeassistant/components/emoncms/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Update homeassistant/components/emoncms/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Apply suggestions from code review
* Apply suggestions from code review v2
* Update homeassistant/components/emoncms/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Update sensor.py
Update `config_unit`
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* Add edl21 component for SML-based smart meters
* edl21: Remove unused variable
* [edl21] Add 1 minute throttle to the sensor
* Update homeassistant/components/edl21/manifest.json
Fix documentation URL
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* edl21: Move imports to top
* edl21: Remove special case for STATE_UNKNOWN, which replicated default behavior
* edl21: Implement blacklist for and warn about unhandled OBIS values
* edl21: Make blacklist global
* edl21: Add filter to issues URL
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* edl21: Rename device to entity
* edl21: Don't schedule async_add_entities
* edl21: Use dispatcher, implement own throttling mechanism
* edl21: Simplify keeping track of known obis
* edl21: Use whitelist for state attributes
* edl21: Remove dispatcher on shutdown
* edl21: Convert state attributes to snakecase
* edl21: Annotate handle_telegram with @callback
* edl21: Call async_write_ha_state instead of schedule_update_ha_state
Co-authored-by: David Straub <straub@protonmail.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Initial version
Parse configuration, but return a fixed value
* Add basic functionality
Request real data from the server
Currently the prices are not getting updated, but the petrol station
data is real
* Update values regularly
The tankerkoenig values get updated regularly with real data.
* Move base functionality for the sensor to a base class
And move that to an own file, so that it can be inherited
* Reduce calls to tankerkoenig api
Use a master/slave concept for sensors; one master gets the data and
updates it into the slaves.
* Update requirements files
* Update all gas stations at once
* Remove tests directory
Currently there are no tests for the integration; will be added in
a future commit.
* Fix slaves not being updated
Let the base class regularly poll, so that slaves are also updated
* Refactor entity creation
Create an auxiliary method to add a station to the entity list,
in preparation to allowing extra stations.
* Add possibility to manually add stations
Add a new configuration option "stations" to manually add extra stations
* Fix style issues
Make the code more pythonic
* Remove redundant code
Implement suggestions from the code review
* Change to platform component
Remove the master/slave concept, in favor of a platform with dummy sensors.
The platform takes care of contacting the server and fetching updates
atomically, and updating the data on the sensors.
* Rename ATTR_STATE
Rename the attribute to "IS_OPEN", to avoid confusion with the sensor state.
* Minor updates
Combine two consecutive error logs into a single one.
Update the sensor's icon
* Separate address into different fields
* Style updates
Use "[]" syntax instead of ".get()" for required parameters
Use warning log level for not available fuel types
* Implement review comments
Fix style issues
Improve error messages
Remove redundant options
* Refactor using DataUpdateCoordinator
Use the new DataUpdateCoordinator to fetch the global data from
the API, instead of implementing an own method.
Also fix comments from the PR
* Implement PR comments
Implement suggestions to improve code readability and keep the Home Assistant style.
Also separate fetching data to an async thread
* Add Avri waste collection sensor
* Apply black formatting
* Update manifest
* Add requirements
* Add sensor to coverage
* Update import order
* Bump dependency to include todays pickup
* Bump avri version in requirements_all.txt
* Code review comments
* Reduce scan interval to 4 hours
This makes sure that no matter what happens, in
the morning the correct dates have been pulled
without the old ones lingering for too long.
* Better logging
* Made scan interval a timedelta
* Fix import order
* Update homeassistant/components/avri/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Update homeassistant/components/avri/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Use filter instead of break statement
* Use positive int for house number extension
* Switch voluptuous types for house number and house number extension
* Update homeassistant/components/avri/sensor.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Implement `available`
* Bump avri api
* Code review comments
* Replace `postcode` with `zip_code`
* Update logic for `available`
* Remove variable for delimiter
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* hookid : isort fix
* New platform: Ezviz
* updated CODEOWNERS for ezviz
* proper test requirements
* resolved conflict
* regenerated requirements
* removed stale comments, only one call to add_entities, removed unnecessary attributes
* setup is sync, not async. Removed stale comments
* Compatible with pyezviz 0.1.4
* pyezviz 0.1.4 is now requiredf
* Added PTZ + switch management
* added services.yaml
* proper requirement
* PTZ working in async mode
* Now updates the entity
* Compatible with pyezviz 0.1.5.1
* Fixed switch ir service registering
* now requires pyezviz 0.1.5.2
* now requires pyezviz 0.1.5.2
* Revert "regenerated requirements"
This reverts commit 848b317cf9.
* Rollbacked to a simpler version
* snake_case names everywhere, logging sanatizing, voluptuous proper check
* pyezviz 0.1.5, reworked the PR so that it's intelligible
* no need for services.yaml for now
* proper voluptuous validation
* Removed stale code, use proper conf variable, describe attributes
* regenerated requirements
* stale
* removed status from attributes, since we use it for available we don't need it here then.
* Fixed log message
* Initial implementation of Vilfo router integration.
This commit is a combination of several commits, with commit messages in bullet form below.
* Added additional files to Vilfo integration.
* Added generated files.
* Fixed alphabetic order in generated config_flows.
* Continued implementation of config flow for Vilfo integration.
* Continued work on config_flow for Vilfo.
* Updated requirements in manifest for Vilfo Router integration.
* Some strings added to Vilfo Router integration.
* Vilfo Router integration updated with sensor support.
* Code style cleanup.
* Additional cleanup of config flow.
* Added additional UI strings for Vilfo Router
* Updated tests of config flow and fixed formatting
* Updated requirement upon vilfo-api-client.
* Sensor refactoring including support for icons
* Code style changes for Vilfo Router integration
* Code cleanup
* Fixed linting issues in Vilfo Router integration
* Fixed import order in test for Vilfo integration.
* Updates to Vilfo Router integration based on feedback
Based on the feedback received, updates have been made to the Vilfo Router integration.
A couple of the points mentioned have not been addressed yet, since the appropriate action has not yet been determined. These are:
* https://github.com/home-assistant/home-assistant/pull/31177#discussion_r371124477
* https://github.com/home-assistant/home-assistant/pull/31177#discussion_r371202896
This commit consists of:
* Removed unused folder/submodule
* Fixes to __init__
* Fixes to config_flow
* Fixes to const
* Refactored sensors and applied fixes
* Fix issue with wrong exception type in config flow
* Updated tests for Vilfo integration config_flow
* Updated dependency upon vilfo-api-client to improve testability
* Import order fixes in test
* Use constants instead of strings in tests
* Updated the VilfoRouterData class to only use the hostname as unique_id when it is the default one (admin.vilfo.com).
* Refactored based on feedback during review.
* Changes to constant names,
* Blocking IO separated to executor job,
* Data for uptime sensor changed from being computed to being a timestamp,
* Started refactoring uptime sensor in terms of naming and unit.
* Updated constants for boot time (previously uptime) sensor.
* Refactored test of Vilfo config flow to avoid patching code under test.
* UI naming fixes and better exception handling.
* Removed unused exception class.
* Various changes to Vilfo Router integration.
* Removed unit of measurement for boot time sensor,
* Added support for a sensor not having a unit,
* Updated the config_flow to handle when the integration is already configured,
* Updated tests to avoid mocking the code under test and also to cover the aforementioned changes.
* Exception handling in Vilfo Router config flow refactored to be more readable.
* Refactored constant usage, fixed sensor availability and fix API client library doing I/O in async context.
* Updated signature with hass first
* Update call to constructor with changed order of arguments
* Refresh the august access token
when needed.
Currently august will stop working when the token
expires about every six month.
This resolves issue #23788
* Make refresh_access_token_if_needed private since we do not want additional callers
* Add init
* fix unique_id computation for switches
* update konnected component to use async, config entries, registries. Pro board support and tests
* clean up formatting comments from PR
* use standard interfaces in tests
* migrate config flow to use options
* address latest pr feedback
* format for import as part of config schema validation
* address pr feedback
* lint fix
* simplify check based on pr feedback
* clarify default schema validation
* fix other schema checks
* fix translations
Co-authored-by: Nate Clark <nate@nateclark.com>
* Initial commit
* ran hassfest and gen_requirements_all scripts
* fixes per request from Paulus Schoutsen
* ran gen_requirements_all
* updated library version - removed some debug leftover
* get_requirements again...
* added documentation URL
* ran isort
* changed storage in hass.data[DOMAIN] to use entry_id instead of host
* adopted unit tests to latest fix
* Update const.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add MELCloud integration
* Provides a climate and sensor platforms. Multiple platforms on one go
is not the best option, but it does not make sense to remove them and
commit them later either.
* Email and access token are stored to the ConfigEntry. The token can be
updated by adding the integration again with the same email address. The
config flow is aborted and the update is performed on the background.
* Run isort
* Fix pylint errors
* Run black
* Increase coverage
* Update pymelcloud dependency
* Add HVAC_MODE_OFF emulation
* Remove print
* Update pymelcloud to enable device type filtering
* Collapse except blocks and chain ClientNotReadys
* Add preliminary documentation URL
* Use list comp for creating model info
Filters out empty model names form units.
* f-string galore
Dropped 'HVAC' from AtaDevice name template.
* Delegate fan mode mapping to pymelcloud
* Fix type annotation
* Access AtaDevice through self._device
* Prefer list comprehension
* Update pymelcloud to leverage device type grouping
The updated backend lib returns devices in a dict grouped by the device
type. The devices do not necessarily need to be in a single list and
this way isinstance is not required to extract devices by type.
* Remove DOMAIN presence check
This does not seem to make much sense after all.
* Fix async_setup_entry
Entry setup used half-baked naming from few experimentations back.
The naming conventiens were unified to match the platforms.
A redundant noneness check was also removed after evaluating the
possible return values from the backend lib.
* Simplify empty model name check
* Improve config validation
* Use config_validation strings.
* Add CONF_EMAIL to config schema. The value is not strictly required
when configuring through configuration.yaml, but having it there makes
things more consistent.
* Use dict[key] to access required properties.
* Add DOMAIN in config check back to async_setup. This is required if an
integration is configured throught config_flow.
* Remove unused manifest properties
* Remove redundant ClimateDevice property override
* Add __init__.py to coverage exclusion
* Use CONF_USERNAME instead of CONF_EMAIL
* Use asyncio.gather instead of asyncio.wait
* Misc fixes
* any -> Any
* Better names for dict iterations
* Proper dict access with mandatory/known keys
* Remove unused 'name' argument
* Remove unnecessary platform info from unique_ids
* Remove redundant methods from climate platform
* Remove redundant default value from dict get
* Update ConfigFlow sub-classing
* Define sensors in a dict instead of a list
* Use _abort_if_unique_id_configured to update token
* Fix them tests
* Remove current state guards
* Fix that gather call
* Implement sensor definitions without str manipulation
* Use relative intra-package imports
* Update homeassistant/components/melcloud/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add Minecraft Server integration
* Add unit test for config flow
* Fixed some review findings and increased unit test coverage
* Fixed docstrings of new test cases
* Removed unnecessary debug log messages
* Added unique IDs and device infos and removed duplicate name validation
* Attempt to fix unit test on CI
* Return state OFF instead of UNAVAILABLE in case connection to server drops
* Added property decorator to server properties, even less debug messages, improved sensor dispatcher connection and other review findings fixed
* Moved special property handling to sensors, fixed name confusion in sensor entity, switch to HA const for scan_interval, simplified building players list string
* Improved periodic update, speeded up unit tests
* Added type hints, added callback decorator to entity update callback, added const.py to unit test exclusions
* Changed state sensor to binary sensor, removed empty unit test file, added constants for icons and units
* Let HA handle unknown state, check for None in description and players list sensor
* Removed periods at end of log messages, removed constant for default host
* Updated requirements_test_pre_commit.txt, fixed codespell findings
* Use localhost as default host
* Removed passing hass to entities, moved log message from init, moved host lower to vol, use proper patch library, patch library instead of own code
* Replaced server properties with global instance attributes, removed config option scan_interval, switch back to async_track_time_interval
* Removed description and players list sensors, added players list as state attributes to online players sensor, raise OSError instead of deprecated IOError, other minor review findings fixed
* Use MAC address for unique_id in case of an IP address as host, added getmac to manifest.json, added invalid_ip to strings.json, added new test cases for changes in config_flow, replace all IOError's with OSError, other review findings fixed
* Removed double assignment
* Call get_mac_address async safe
* Handle unavailable and unknown states to reach silver quality scale, added quality scale to manifest.json
* initial version of gdacs integration
* updated translations
* generated files
* added abbreviation
* bumped library version
* small feed entry attribute fixes
* add unit tests
* need to use original mdi name
* bumped library version
* improved entity name for earthquakes
* round vulnerability number
* typo
* support for categories
* testing support for categories
* tie longitude and latitude together
* validating categories
* simplifying setup
* passing domain as parameter
* simplified test setup
* moved test code
* simplified test code
* removed superfluous code
* changed approach to unique identifier
* changed code structure
* simplified unit system handling
* made schema a constant
* comment added
* simplifying code
* added message if location already configured
* removed unnecessary code
* simplified test code
* avoid mocking __init__
* pylint
* simplified code
* fetch categories from integration library
* setting PARALLEL_UPDATES
* setting PARALLEL_UPDATES to zero/unlimited
* added quality scale
* Add salt component
* Update files from development checklist
* Use warning log level when data cannot be retrieved
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Remove empty fields from manifest.json
* Remove default arguments for host and username
* Bump saltbox library version
* Refactor and improve error handling
* Dev checklist
* Fix linting errors
* Check for None and return empty list
* Log on debug level instead of info
* More compact None checks
* Remove redundant None check
* Return None on exception but store as empty list
* More compact syntax
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* Bump skybellpy to 0.4.0
* Bump skybellpy to 0.4.0 in requirements_all.txt
* Added extra states for STATE_ALARM_TRIGGERED to allow users to know if
it is a burglar or fire or carbon monoxide so automations can take
appropriate actions. Updated TotalConnect component to handle these new
states.
* Fix const import
* Fix const import
* Fix const imports
* Bump total-connect-client to 0.26.
* Catch details of alarm trigger in state attributes.
Also bumps total_connect_client to 0.27.
* Change state_attributes() to device_state_attributes()
* Move totalconnect component toward being a multi-platform integration. Bump total_connect_client to 0.28.
* add missing total-connect alarm state mappings
* Made recommended changes of MartinHjelmare at
https://github.com/home-assistant/home-assistant/pull/24427
* Update __init__.py
* Updates per MartinHjelmare comments
* flake8/pydocstyle fixes
* removed . at end of log message
* added blank line between logging and voluptuous
* more fixes
* Adding totalconnect zones as HA binary_sensors
* fix manifest.json
* flake8/pydocstyle fixes. Added codeowner.
* Update formatting per @springstan guidance.
* Fixed pylint
* Add zone ID to log message for easier troubleshooting
* Account for bypassed zones in update()
* More status handling fixes.
* Fixed flake8 error
* Another attempt at black/isort fixes.
* Bump total-connect-client to 0.50. Simplify code using new functions in
total-connect-client package instead of importing constants. Run black
and isort.
* Fix manifest file
* Another manifest fix
* one more manifest fix
* more manifest changes.
* sync up
* fix indent
* one more pylint fix
* Hopefully the last pylint fix
* make variable names understandable
* create and fill dict in one step
* Fix name and attributes
* rename to logical variable in alarm_control_panel
* Remove location_name from alarm_control_panel attributes since it is
already the name of the alarm.
* Multiple fixes to improve code per @springstan suggestions
* Update homeassistant/components/totalconnect/binary_sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Multiple changes per @MartinHjelmare review
* simplify alarm adding
* Fix binary_sensor.py is_on
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
