I picked up working on this integration because I wanted to make sure the new Bluetooth stack had a good test case to work out issues and did not generate unexpected breaking changes.
Since I do not use switchbot in production, I usually cannot help solve problems beyond the Bluetooth stack that is visible to HA.
While I am still happy to do code reviews here, the Bluetooth stack has matured to the point where watching for issues here is no longer helpful to maintaining the stack as the signal to noise ratio is too high
* ipma: remove abmantis from codeowners
I am not currently maintaining this integration.
* Run hassfest
* Try again
---------
Co-authored-by: Franck Nijhof <git@frenck.dev>
* Add wake component
* Add wake support to Wyoming
* Add helper function to assist_pipeline (not complete)
* Rename wake to wake_word
* Fix platform
* Use send_event and clean up
* Merge wake word into pipeline
* Add wake option to async_pipeline_from_audio_stream
* Add start/end stages to async_pipeline_from_audio_stream
* Add wake timeout
* Remove layer in wake_output
* Use VAD for wake word timeout
* Include audio metadata in wake-start
* Remove unnecessary websocket command
* wake -> wake_word
* Incorporate feedback
* Clean up wake_word tests
* Add wyoming wake word tests
* Add pipeline wake word test
* Add last processed state
* Fix tests
* Add tests for wake word
* More tests for the codebot
* Create Opower integration
* fix tests
* Update config_flow.py
* Update coordinator.py
* Update sensor.py
* Update sensor.py
* Update coordinator.py
* Bump opower==0.0.4
* Ignore errors for "recent" PGE accounts
* Add type for forecasts
* Bump opower to 0.0.5
* Bump opower to 0.0.6
* Bump opower to 0.0.7
* Update requirements_all.txt
* Update requirements_test_all.txt
* Update coordinator
Fix exception caused by https://github.com/home-assistant/core/pull/92095
{} is dict but the function expects a set so change it to set()
* Improve exceptions handling
* Bump opower==0.0.9
* Bump opower to 0.0.10
* Bump opower to 0.0.11
* fix issue when integration hasn't run for 30 days
use last stat time instead of now when fetching recent usage/cost
* Allow username to be changed in reauth
* Don't allow changing username in reauth flow
* Migrate Linn / Openhome integration to SSDP config flow
* moved device initialisation into __init__
* wait for user step before adding openhome entities
* add CONFIG_SCHEMA
* cover confirmation step in config flow test
* Address comments
---------
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Implemented Renson integration
* - renamed component to a better name
- Made cleaner code by splitting up files into different one
- Fixed issues regarding getting data from library
- Added service.yaml file
* Added Renson services
* cleanup translations
* added config_flow tests
* changed config_flow, removed all services
* use SensorEntityDescription + introduced new binarySensor
* fixed config_flow test
* renamed renson_endura_delta to renson
* refactored sensors and implemented binary_sensor
* Changed some sensors to non measurement and added entity_registery_enabled_default for config sensors
* Enabled binary_sensor
* changed import to new renamed module
* Merge files into correct files + cleaned some code
* Change use of EntityDescription
* Update codeowners
* Fixed lint issues
* Fix sensor
* Create test.yml
* Update test.yml
* add github action tests
* Format json files
* Remove deprecated code
* Update homeassistant/components/renson/binary_sensor.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Use Coordinqte in Sensor
* Migrated binary sensor to use coordinate
* Removed firmwareSensor
* Add entity_catogory to binary_sensor
* Add services
* Revert "Add services"
This reverts commit 028760d8d8.
* update requirements of Renson integration
* Add services and fan
* Fixed some issue + fixed PR comments
* Cleanup code
* Go back 2 years ago to the bare minimum for PR approval
* Refactored code and added a lot of device classes to the entities
* Fix some bugs
* Add unique Id and some device class
* Show the level value for CURRENT_LEVEL_FIELD instead of the raw data
* Remove FILTER_PRESET_FIELD for now
* Make the _attr_unique_id unique
* Changed Renson tests
* Moved Renson hass data into @dataclass
* Changed test + added files to .coveragerc
* Add device_class=SensorDeviceClass.Duration
* Fix syntax
---------
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add discovergy integration
* Capitalize measurement type as it is in uppercase
* Some logging and typing
* Add all-time total production power and check if meter has value before adding it
* Add tests for Discovergy and changing therefor library import
* Disable phase-specific sensor per default, set user_input as default for schema and implement some other suggestions form code review
* Removing translation, fixing import and some more review implementation
* Fixing CI issues
* Check if acces token keys are in dict the correct way
* Implement suggestions after code review
* Correcting property function
* Change state class to STATE_CLASS_TOTAL_INCREASING
* Add reauth workflow for Discovergy
* Bump pydiscovergy
* Implement code review
* Remove _meter from __init__
* Bump pydiscovergy & minor changes
* Add gas meter support
* bump pydiscovergy & error handling
* Add myself to CODEOWNERS for test directory
* Resorting CODEOWNERS
* Implement diagnostics and reduce API use
* Make homeassistant imports absolute
* Exclude diagnostics.py from coverage report
* Add sensors with different keys
* Reformatting files
* Use new naming style
* Refactoring and moving to basic auth for API authentication
* Remove device name form entity name
* Add integration type to discovergy and implement new unit of measurement
* Add system health to discovergy integration
* Use right array key when using an alternative_key & using UnitOfElectricPotential.VOLT
* Add options for precision and update interval to Discovergy
* Remove precision config option and let it handle HA
* Rename precision attribute and remove translation file
* Some formatting tweaks
* Some more tests
* Move sensor names to strings.json
* Redacting title and unique_id as it contains user email address
* Add Dremel 3D Printer integration
* remove validators requirement
* ruff
* uno mas
* uno mas
* uno mas
* uno mas
---------
Co-authored-by: Franck Nijhof <git@frenck.dev>
Co-authored-by: Tom Harris <tomharris@harrisnj.net>
* Move constant values to separate file
* Move constant values to separate file
* Add config flow to lastfm
* Add tests
* Add config flow to lastfm
* Add tests
* Add tests
* Add tests
* Add extra form for main user and autofill with friends
* Add extra form for main user and autofill with friends
* Add extra form for main user and autofill with friends
* Add extra form for main user and autofill with friends
* Add OptionsFlow
* Add tests
* Fix feedback
* Fix feedback
* Fix feedback
* Fix feedback
* Fix test
* Apply suggestions from code review
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update config_flow.py
* Update config_flow.py
* Update config_flow.py
* Update homeassistant/components/lastfm/config_flow.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Add tests
* Cleanup
* Update config_flow.py
* Update config_flow.py
* Update config_flow.py
* Fix test
* Fix feedback
* Codeowner lastfm
* Fix feedback
* Fix feedback
* Parametrize errors
* Parametrize errors
* Parametrize errors
* Finish tests
---------
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Add new preset to Tado to enable geofencing mode
Add new 'auto' preset mode to enable Tado to be set to auto geofencing
mode. The existing ‘home’ and ‘away’ presets switched Tado into manual
geofencing mode and there was no way to restore it to auto mode.
Note 1: Since preset modes (home, away and auto) apply to the Tado home
holistically, irrespective of the Tado climate entity used to select
the preset, three new sensors have been added to display the state of
the Tado home
Note 2: Auto mode is only supported if the Auto Assist skill is enabled
in the owner's Tado home. Various checks have been added to ensure the
Tado supports auto geofencing and if it is not supported, the preset is
not listed in the preset modes available
* Update codeowners in manifest.json
* Update main codeowners file for Tado component
* Added new integration to support Electra Smart (HVAC)
* fixes + option to set scan interval
* renamed the module to electrasmart and added unittests
* added non tested files to .coveragerc
* changed the usage from UpdateCoordinator to each entity updates it self
* small fixes
* increased pypi package version, increased polling timeout to 60 seconds, improved error handling
* PARALLEL_UPDATE=1 to prevent multi access to the API
* code improvements
* aligned with the new HA APIs
* fixes
* fixes
* more
* fixes
* more
* more
* handled re-atuh flow
* fixed test
* removed hvac action
* added shabat mode
* tests: 100% coverage
* ran hassfest
* Update homeassistant/components/electrasmart/manifest.json
Co-authored-by: Shay Levy <levyshay1@gmail.com>
* Update homeassistant/components/electrasmart/manifest.json
Co-authored-by: Shay Levy <levyshay1@gmail.com>
* Update homeassistant/components/electrasmart/manifest.json
Co-authored-by: Shay Levy <levyshay1@gmail.com>
* Update homeassistant/components/electrasmart/climate.py
Co-authored-by: Shay Levy <levyshay1@gmail.com>
* address Shay's comments
* address Shay's comments
* address more comments
---------
Co-authored-by: Shay Levy <levyshay1@gmail.com>
* Copy openai_conversation to google_generative_ai_conversation
This is to improve diff of the next commit with the actual implementation.
Commands used:
cp -r homeassistant/components/openai_conversation/ homeassistant/components/google_generative_ai_conversation/
cp -r tests/components/openai_conversation/ tests/components/google_generative_ai_conversation/
find homeassistant/components/google_generative_ai_conversation/ tests/components/google_generative_ai_conversation/ -type f | xargs sed -i \
-e 's@openai_conversation@google_generative_ai_conversation@g' \
-e 's@OpenAI Conversation@Google Generative AI Conversation@g' \
-e 's@balloob@tronikos@g'
* Add google_generative_ai_conversation to Google brand
* Google Generative AI Conversation
* Sync recent openai changes
* handle empty responses
* init setup of Anova Sous Vide
* bump anova-wifi to 0.2.4
* Removed yaml support
* Bump to anova-wifi 0.2.5
* Added support for adding sous vide while offline
* Added basic test for sensor
* added better tests for sensors and init
* expanded code coverage
* Decreased timedelta to lowest functioning value.
* Updating my username
* migrate to async_forward_entry_setups
* applying pr recommended changes
* bump anova-wifi to 0.2.7
* Improvements to hopefully get this review ready
* formatting changes
* clean ups for pr review
* remove unneeded unique id check.
* bump ao anova_wifi 0.3.0
* rename device_id to device_unique_id
* renamed to 'anova'
* added unique_id to MockConfigEntry
* removed leftover anova sous vides
* added device id to strings
* added error for incorrect device id
* add has_entity_name
* added attr name for tests
* added authentication functionality
* bump to 0.4.3
* split entity into its own class/object
* pulling firmware version out of async_setup
Co-authored-by: J. Nick Koston <nick@koston.org>
* addressed pr changes
* fixed pytest
* added anova data model
* removed unneeded time change
* add logging in package
* rework step_user
* Update homeassistant/components/anova/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Removed lower from attr unique id
Co-authored-by: J. Nick Koston <nick@koston.org>
* Removed unneeded member variables in sensor
Co-authored-by: J. Nick Koston <nick@koston.org>
* removed repeated subclass attr
Co-authored-by: J. Nick Koston <nick@koston.org>
* simplify update_failed test
* created descriptionentity
* bump to 0.6.1 limit ws connect
* add translation for sensor entities
* version bump - support pro model
* add anova to strict typing
* fixed sensor not getting datas type
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* Check for new devices in init
* style changes
* return false instead of config entry not ready
* move serialize_device_list to utils
* move repeating device check into api
* moved unneeded code out of try except
* fixed tests to get 100% cov
* Update homeassistant/components/anova/strings.json
Co-authored-by: J. Nick Koston <nick@koston.org>
---------
Co-authored-by: J. Nick Koston <nick@koston.org>
* init roborock commit
* init commit of roborock
* removed some non-vacuum related code
* removed some non-needed constants
* removed translations
* removed options flow
* removed manual control
* remove password login
* removed go-to
* removed unneeded function and improved device_stat
* removed utils as it is unused
* typing changes in vacuum.py
* fixed test patch paths
* removed unneeded records
* removing unneeded code in tests
* remove password from strings
* removed maps in code
* changed const, reworked functions
* remove menu
* fixed tests
* 100% code coverage config_flow
* small changes
* removed unneeded patch
* bump to 0.1.7
* removed services
* removed extra functions and mop
* add () to configEntryNotReady
* moved coordinator into seperate file
* update roborock testing
* removed stale options code
* normalize username for unique id
* removed unneeded variables
* fixed linter problems
* removed stale comment
* additional pr changes
* simplify config_flow
* fix config flow test
* Apply suggestions from code review
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* First pass at resolving PR comments
* reworked config flow
* moving vacuum attr
* attempt to clean up conflig flow more
* update package and use offline functionality
* Fixed errors and fan bug
* rework model and some other small changes
* bump version
* used default factory
* moved some client creation into coord
* fixed patch
* Update homeassistant/components/roborock/coordinator.py
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* moved async functions into gather
* reworked gathers
* removed random line
* error catch if networking doesn't exist or timeout
* bump to 0.6.5
* fixed mocked data reference url
* change checking if we have no network information
Co-authored-by: Allen Porter <allen.porter@gmail.com>
---------
Co-authored-by: Allen Porter <allen.porter@gmail.com>
Co-authored-by: Allen Porter <allen@thebends.org>
* Media playback working
* Working on OPUS audio
* Before rollback
* Fix is_end
* First working pipeline
* Clean up
* Remove asserts
* Send HA version in SDP
* Use async_pipeline_from_audio_stream
* Use config flow with allowed IP
* Satisfy ruff
* Remove use of regex for SIP IP
* Use voip-utils
* Fix imports
* Add Pipeline to __all__
* Fix voice assistant tests
* Basic VoIP test
* Run hassfest
* Generate requirements
* Bump voip utils (missing requirement)
* Allow tts_options to be passed in to pipeline run
* Add config flow tests
* Update test snapshots
* More tests
* Remove get_extra_info
* Appeasing the codebot
* Android TV Remote integration
* Add diagnostics
* Remove test pem files from when api was not mocked
* Address review comments
* Remove hass.data call in test
* Store the certificate and key in /config/.storage
* update comments
* Update homeassistant/components/androidtv_remote/__init__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* import callback
* use async_generate_cert_if_missing
---------
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Initial commit
* Add websocket test tool
* Small tweak
* Tiny cleanup
* Make pipeline work with frontend branch
* Add some more info to start event
* Fixes
* First voice assistant tests
* Remove run_task
* Clean up for PR
* Add config_flow.py
* Remove CLI tool
* Simplify by removing stt/tts for now
* Clean up and fix tests
* More clean up and API changes
* Add quality_scale
* Remove data from run-finish
* Use StrEnum backport
---------
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
J. Nick Koston