* Add switch platform to Fritz
* Fix tests
* Pylint
* Small fix
* Bump fritzprofiles to fix log level and identifier
* Fix different WiFi networks with same name
* Changed exposed attributes
* Moved to extra_state
* Remove redundant lambda
* Add missing wait
* Removed identifiers
* Update homeassistant/components/fritz/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/fritz/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add mapping dict
* Device Profile disabled by default
* Heavy cleanup
* Tweak
* Bug fix
* Update homeassistant/components/fritz/switch.py
Co-authored-by: Aaron David Schneider <aaron.schneider@nbi.ku.dk>
* Fix port forward switching + small log improvement
* Cleanup from old approach
* Handle port mapping hot removal (from device)
* Minor fixes
* Typying
* Removed lambda call
* Last missing strict typing
* Split get entities
* Func rename
* Move FritzBoxBaseSwitch to switch.py
* Removed lambda
* Update homeassistant/components/fritz/common.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/fritz/common.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/fritz/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/fritz/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/fritz/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/fritz/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Fixes after applying comments
* Remvoed redundant try block
* Removed broad-except
* Optimized async/sync switch
* Update homeassistant/components/fritz/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/fritz/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/fritz/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Address remaining comments
* Optimize return list
* More optimization for return lists
* Some missing strict typing
* Redundant typing
* Update homeassistant/components/fritz/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Wrong if
* Introduce const for profile status
* Update homeassistant/components/fritz/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/fritz/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Fix mypy
* Switch back to get_local_ip()
* Address latest comments
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: Aaron David Schneider <aaron.schneider@nbi.ku.dk>
* Initial commit for new musiccast integration
* Add zone support
* Get/set volume level
* Remove volume step
* Create custom MusicCastData type
* Create MusicCastDevice
* Fix await
* Add power and mute control
* Implement all basic media_player parts
* Support input switching
* Add duration/position support
* Add advanced tuner functions
* Basic media browser
* Add layer in media browser to see all available list_infos
* Added join/unjoin services and group informations. Known issue: You can not link zone 2 to main at the moment (WIP)
* Many fixes to make multiple zones and grouping work. Next step: implement error handling and remove debugging information
* WIP: Added Multizone Support and allows clients to directly jump from one group to another. Known issue: If a server tries to join a group as client, he has to close his group first. Sometimes the device that was a server previously jumps out of the group directly after joining.
* Updated group management to make it wait for the updated group information before performing the next actions - Timeouts after 1 second, then polls the distribution data. If the data are still not updated, there will be one retry before an Exception is thrown. Extended the state attributes for clients to make them return group details from their servers (leads to inactive group management buttons for the client). Added documentation and restructured the code.
* Make the service handle function name for group specific service calls unique
* Added service descriptions for set_sleep_timer, set_alarm, recall_netusb_preset, store_netusb_preset
* Added data entries for alarm specific values and a netusb preset list. Implemented fetching function for clock and netusb presets.
* Registered and implemented services for set_sleep_timer, set_alarm, recall_netusb_preset, store_netusb_preset. The set_alarm service works with a special mediaplayer alarm lovelace card, I am currently working on.
The NetUSB Presets are also available using the media browser. Maybe we could also add the Tuner presets in the future for both setting up the alarm and recalling them via service and media browser.
* Removed some debug prints
* Moved MusicCast Integration to the aiomusiccast library. This library supports media browsers with multiple pages. Added ssdp support for the discovery
* Minor fix in the group management and tidied up a bit
* Updated manifest of yamaha musiccast
* Update library
* Minor fix in the media browser. get_distribution_num does not have to be async, so it has been changed. Adjusted the client join function to turn on the client before joining a group - the musiccast app does so, so hopefully this fixes the rare errors when adding a turned off client to a group. Some reformating and by hooks fixed most of the requirements of the hooks. Known exception from this: mypy throws an error for line 116.
* Removed some old out commented code. Fixed some error handling, when the user enters a non reachable or non yamaha host in the manual setup. Fixed linting/styling errors. Implemented tests to bring the coverage for the config flow to 100%.
* Fixed linting/styling errors. Return a DeviceInfo object instead of a dict.
* Fixed linting/styling errors. Added a new error type to the translations.
* In the yamaha API the system_id is equal to the serial number in the DLNA description. Due to that it was possible to configure a device twice, because the serial number from the yamaha API was different. This issue was fixed.
* Updated tests and added a test for adding a device manually, which is already present in the system
* Remove print statements
* Fix sleep timer service call
* Fix yamllint error
* Shrink PR down to just new library + config flow with discovery
* Add __init__.py to .coveragerc
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Franck Nijhof <git@frenck.dev>
* Implement suggestions from code review
* Improve identifiers and connections, remove event loop parameter
* Add coordinator back
* Better exception handling
* Fix unique id in ssdp step
* Remove abc.ABC from MusicCasteDeviceEntity
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/yamaha_musiccast/config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Replace the repeat mode mapping from mc to ha by a generic solution
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* add coordinator to the super call of the mediaplayer
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* add the coordinator to the init function of the MusicCastEntity
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Pass the coordinator from the MusicCastEntity init function to the CoordinatorEntity init function
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* merged _handle_config_flow into async_step_user
* reformated the exception handling of the user step. In the case that the device already exists, the AbortFlow will be raised.
* Removed model from the config entry. It was neither set nor used anymore.
* Fixed the test for the config flow.
* Use async_write_ha_state instead of schedule_update_ha_state.
* Add default value for the system ID gotten in the user step
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/yamaha_musiccast/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Added a fixture to avoid IO in the test_user_input_device_not_found test
* Use absolute imprt to import data_entry_flow.
* Use local vars for host and serial_number in async_step_user.
* Remove ip_address and zone_id properties.
* Use device id for the unique ID of an entity instead of the macs
* Removed entry_id from the MusicCastEntity init function.
* Updated strings and English translation.
* don't set the coordinator in the mediaplayer init.
* Implemented legacy configuration.yaml support for existing configurations.
* Added tests for the newly added config flow step.
* Use device_id as identifier
* Fix an accidentally relative import
* Fix pylint warnings
* use logger.error instead of logger.exception in the import step.
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Use CONF_HOST instead of 'host'
* Only support the import from configuration.yaml if no config entries are setup for musiccast. If there are already config entries in HA and none of them is a representation of a config given in configuration.yaml (e.g. config added after the first import), an error will be logged.
* Update homeassistant/components/yamaha_musiccast/media_player.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Readded PLATFORM_SCHEMA for configuration.yaml
* Raise an exception for all services, which are only supported for specific sources.
* Bump aiomusiccast to 0.6 to support asyncio sockets
Co-authored-by: Michael Harbarth <michael.harbarth@gmx.de>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Franck Nijhof <git@frenck.dev>
* Add Ecobee humidifier device_info and unique_id
Ecobee humidifier entity was not connected to the thermostat device.
This change will ensure the entitiy is properly connected.
This change also fills out the ecobee-data.json fixutre data a bit
to address failures in the test setup.
* Add Ecobee humidifier device_info and unique_id
Adjust test fixture data to increase pytest coverage
Clean up indenting in ecobee-data.json
* Add Ecobee humidifier device_info and unique_id
Update exception case in device_info to not
be included in codecov tests. This case has
been tested locally.
* Add Ecobee humidifier device_info and unique_id
Address pylint issue
* Add Ecobee humidifier device_info and unique_id
Remove no cover pragma and add ecobee humidifier.py to
.coveragerc
* add support for binary_sensor
* added default enabled for binary sensors
* fixed coverage and a import deleted
* disable pylint for line
* Apply suggestions from code review
* split binary sensor and used more attr fields
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* initial commit of SIA integration
* translations
* moved reactions to file, typed everything
* fixed no-else-return 3 times
* refactored config and fix coverage of test
* fix requirements_test
* elimated another platform
* forgot some mentions of sensor
* updated config flow steps, fixed restore and small edits
* fixed pylint
* updated config_flow with better schema, small fixes from review
* final comment and small legibility enhancements
* small fix for pylint
* fixed init
* fixes for botched rebase
* fixed port string
* updated common strings
* rebuild component with eventbus
* fixed pylint and tests
* updates based on review by @bdraco
* updates based on new version of package and reviews
* small updates with latest package
* added raise from
* deleted async_setup from test
* fixed tests
* removed unused code from addititional account step
* fixed typo in strings
* clarification and update to update_data func
* added iot_class to manifest
* fixed entity and unique id setup
* small fix in tests
* improved unique_id semantics and load/unload functions
* added typing in order to fix mypy
* further fixes for typing
* final fixes for mypy
* adding None return types
* fix hub DR identifier
* rebased, added DeviceInfo
* rewrite to clean up and make it easier to read
* replaced functions with format for id and name
* renamed tracker remover small fix in state.setter
* improved readibility of state.setter
* no more state.setter and small updates
* mypy fix
* fixed and improved config flow
* added fixtures to test and other cleaner test code
* removed timeband from config, will reintro in a options flow
* removed timeband from tests
* added options flow for zones and timestamps
* removed type ignore
* replaced mapping with collections.abc
* Growatt Server Config flow
* Use reference strings
Co-authored-by: SNoof85 <snoof85@gmail.com>
* Remove configuration.yaml import logic
* Removed import test
* Re-added PLATFORM_SCHEMA validation
* Import yaml from old yaml configuration
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Feedback
* Use Executor for IO only
* Fix imports
* update requirements
* Fix flake8
* Run every section of fetching devices in single executor
* Config flow feedback
* Clean up
* Fix plan step
* Fix config flow test
* Remove duplicate test
* Test import step
* Test already configured entry
* Clean up tests
* Add asserts
* Mock out entry setup
* Add warning if set up via yaml
Co-authored-by: SNoof85 <snoof85@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Scaffold the integration
* Add config flow data schema
* Handle configuration errors
* Get folder states
* Support https
* Fix translations
* Listen to syncthing events in a separate thread
* Bump syncthing
* Automatically reconnect to the syncthing server
* Renames
* Improve loading and unloading
* Update folder states from events
* Refactoring, handle FolderPaused event
* Dynamic folder icons
* Refactoring
* Mark folders as unavailable when senrver is unavailable
* Update folder satus when server is available
* Raise PlatformNotReady
* Implement additional polling
* Stop polling when the server is not available
* Minor fixes
* Remove logging
* Check name uniqueness
* Refactoring
* Minor refactorings
* Bump python-syncthing
* Migrate to aiosyncthing
* Minor fixes
* Update .coveragerc
* Set quality scale
* Bump aiosyncthing, properly handle invalid token
* Fix logging
* Fix logging
* Use CONF_VERIFY_SSL from homeassistant.const
* Bump aiosyncthing. Add Syncthing device
* Fix device name
* Bump aiosyncthing
* Bump aiosyncthing
* Extract SyncthingClient
* Add folder to device_state_attributes
* Do not pass the loop
* Cover config_flow.py
* Move self.async_create_entry outside of the try block
* Raise ConfigEntryNotReady if syncthing server is not reachable
* Fix already configured error message
* Change default name to Syncthing
* Bump aiosyncthing
* Fix formatting
* Fix formatting
* Fix tests
* Fix typo, use lis comprehension
* Fix typo, remove unused CONFIG_SCHEMA
* Bump aiosyncthing
* Remove periods from log messages W0001
* Fix tests
* Black, isort
* Remove empty items from manifest.json
* Fix variable naming
* Remove async_setup
* Use SensorEntity
* Use asyncio.create_task instead of self._hass.loop.create_task
* Do not pass hass to FolderSensor initializer
* Rename device_state_attributes to extra_state_attributes
* Use callbacks
* Simplify tests
* Refactor _listen()
* Use url for the title
* Use the url instead of the name to identify the config entry
* Explicitly set sensor attributes, extract _filter_state
* Use server url instead of name in device_info
* Use server url instead of name in logs
* User server id as a device identifier
* Use URL instead of name to identify config entry
* Use shortened server id instead of name to build entity name and unique id
* Do not use CONF_NAME
* Cleanup unused strings
* Cleanup unused strings
* Add IOT class
* Scaffold the integration
* Add config flow data schema
* Handle configuration errors
* Get folder states
* Support https
* Fix translations
* Listen to syncthing events in a separate thread
* Bump syncthing
* Automatically reconnect to the syncthing server
* Renames
* Improve loading and unloading
* Update folder states from events
* Refactoring, handle FolderPaused event
* Dynamic folder icons
* Refactoring
* Mark folders as unavailable when senrver is unavailable
* Update folder satus when server is available
* Raise PlatformNotReady
* Implement additional polling
* Stop polling when the server is not available
* Minor fixes
* Remove logging
* Check name uniqueness
* Refactoring
* Minor refactorings
* Bump python-syncthing
* Migrate to aiosyncthing
* Minor fixes
* Update .coveragerc
* Set quality scale
* Bump aiosyncthing, properly handle invalid token
* Fix logging
* Fix logging
* Use CONF_VERIFY_SSL from homeassistant.const
* Bump aiosyncthing. Add Syncthing device
* Fix device name
* Bump aiosyncthing
* Bump aiosyncthing
* Extract SyncthingClient
* Add folder to device_state_attributes
* Do not pass the loop
* Cover config_flow.py
* Move self.async_create_entry outside of the try block
* Raise ConfigEntryNotReady if syncthing server is not reachable
* Fix already configured error message
* Change default name to Syncthing
* Bump aiosyncthing
* Fix formatting
* Fix formatting
* Fix tests
* Fix typo, use lis comprehension
* Fix typo, remove unused CONFIG_SCHEMA
* Bump aiosyncthing
* Remove periods from log messages W0001
* Fix tests
* Black, isort
* Remove empty items from manifest.json
* Fix variable naming
* Remove async_setup
* Use SensorEntity
* Use asyncio.create_task instead of self._hass.loop.create_task
* Do not pass hass to FolderSensor initializer
* Rename device_state_attributes to extra_state_attributes
* Use callbacks
* Simplify tests
* Refactor _listen()
* Use url for the title
* Use the url instead of the name to identify the config entry
* Explicitly set sensor attributes, extract _filter_state
* Use server url instead of name in device_info
* Use server url instead of name in logs
* User server id as a device identifier
* Use URL instead of name to identify config entry
* Use shortened server id instead of name to build entity name and unique id
* Do not use CONF_NAME
* Cleanup unused strings
* Cleanup unused strings
* Add IOT class
* Apply suggestions from code review
* Clean up
* Fix dict comprehension
* Clean sensor
* Use the server ID as a config entry unique ID
* Remove the AlreadyConfigured exception
* Clean up old error string
* Format json
* Convert sensor attributes to snake case
* Force CI
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
J. Nick Koston