* bump python-bsblan version to 0.5.8
* add static_state
this holds values that only needs retrieving once in a while
* update diagnostics json with the right info
* Bump aiotractive, start handling authorzation errors when reading events
* Bump aiotractive, start handling authorzation errors when reading events
* Properly handle unauthorized errors
* Update homeassistant/components/tractive/__init__.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Use await when unsibscribing after auth error
* Update homeassistant/components/tractive/__init__.py
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Offload platform specific bluetooth code to bluetooth-adapters
* adjust
* fix some more patch targets
* more test fixes
* almost there
* may not be setup yet
* more fixes
* fixes
* fix test
* fix merge
* Addition of battery level sensor. Correction of pylint errors
* Review improvement for typing
* Review improvement for typing
* Correction following review
* Use HERE API v8
Signed-off-by: Kevin Stillhammer <kevin.stillhammer@gmail.com>
* Add migration
Signed-off-by: Kevin Stillhammer <kevin.stillhammer@gmail.com>
* Catch correct voluptuous error
Signed-off-by: Kevin Stillhammer <kevin.stillhammer@gmail.com>
* Use list comprehension for transit values
* Add migration alternative
Signed-off-by: Kevin Stillhammer <kevin.stillhammer@gmail.com>
* Implemented RestoreEntity
Merged commit conflict
* removed accidental change
* Update homeassistant/components/dynalite/dynalitebase.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* added tests for the state
* added tests for switch state
* moved to ATTR_x and STATE_x instead of strings
some fixes to test_cover
* moved blind to DEVICE_CLASS_BLIND
* used correct constant instead of deprecated
* Implemented RestoreEntity
* removed accidental change
* added tests for the state
* added tests for switch state
* moved to ATTR_x and STATE_x instead of strings
some fixes to test_cover
* fixed isort issue from merge
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Bump gcal_sync to 4.0.1
This reverts test chagnes from PR #81562 that were actually incorrect given
the calendar "get" API returns less information that the "CalendarList" api.
* Initial support for modbus
* Complete test coverage of config flow
* Bump to 1.1.0 with corrected numbers
* Handle missing mapping for reset-alarm
* Fixup type checks after library bump
* Adjust coil number
* Move word_swap to nibegw
* Adjust to 1.1.2 with fixes
* Add series property
* Add S series models
* Correct test for invalid host
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* Move some things into library
* Adjust strings somewhat
* Correct black
* Correct test after validation change
Co-authored-by: J. Nick Koston <nick@koston.org>
* Added initial files for air-Q integration
* Allow FIXME comments in pylint (temporary)
Also reintroduce --ignore-missing-annotations=y
* Set up air-q entry to connect to aioairq's API (initial attempt)
Also add necessary constants
* Implement a class for sensors and its update logic
Very early stage, WIP
* Zeroconf and authentication are working
* Complete the bare-bone minimal working version
Specifically, make AirQSensor update its values.
* Handle invalid authentication gracefully
* Handle ClientConnectionError gracefully
* Add field hint for the login form
The key in the schema, which defines the form in
`ConfigFlow.async_show_form` is looked up in both `airq/strings/json`
and `airq/translations/en.json`. I am still not 100% sure how this
lookup is performed. WIP
* Minor cleanups
* Extend sensor list to all supported by SensorDeviceClass
Also manage warming up sensors
* aioairq is published to PyPI and mentioned in requirements
* Reordered constants and list content alphabetically
As required by style guides. Also turned SENSOR_TYPES to a list
* Updated file docstrings for a dev unfamiliar w/homeassistant like myself
* Adding a bit of logging for the integration setup process
* Expose scan interval & smoothing flag
Also streamline test_authentication in config_flow.
* Fix a type annotation mistake
* Use as many constants from homeassistant.const as possible
My only concern is using CONST_IP_ADDRESS = "ip_address" for smth which
stands for both IP address and mDNS...
* Temporarily rollback ConfigFlow.async_step_configure and use defaults
TODO: implement OptionFlowHandler instead
* Define custom Coordinator, w subset of airq config
The latter is then accessed from entity / sensor constructors to define
correct DeviceInfo
* Provide translations to de & fr + minor changes to en
* Provide translations to ru + a minor en changes
* Make translation a little more helpful and polite
* Fix devicename and entry title
* Remove stale commented out code
* Test config_flow
At this point two helper functions which interact with the external
library are not tested
* Clean up unrelated and meant as temporary changes
* Clean up unnecessary comments meant for internal use
* Move fetching config to a dedicated async coordinator method
As opposed to it being a potentially poorly justified step in
async_setup_entry
* Remove zeroconf support since it is not yet ready
* Remove translations other than en
* Remove unnecessary comments, manifest.json entries, and constants
* Improve exception handling
- `_LOGGER` uses `debug` and not `error` levels.
- Drop `ClientConnect` and catch `aiohttop.ClientConnectError` directly
- Drop `Exception` as it is not expected from `aioairq` (remove the
corresponding test too)
* Drop strings for obsolete errors and steps
Specifically, `unknown` error isn't caught any more. `configure` step
has also been removed.
* Refactor en.json to be consistent with strings.json
* Move target_route from a coordinator argument to a constant
At this point a user cannot configure the target_route route, thus it
does not make sense to expose it half-heartedly in
`AirQCoordinator.__init__`, since it cannot be accessed.
* Fix an async call in `AirQCoordinator.async_setup_entry`
* Refactor underlying aioairq API
- Use `homeassistant.helpers.aiohttp.async_get_clientsession` and pass a
single persistent session to `aioariq.AirQ.__init__`
- `aioairq.AirQ.fetch_device_info` now returns a `DeviceInfo` object heavily
inspired and almost compatible with `homeassistant.helpers.entity.DeviceInfo`.
Make heavier use of this object and define a single `DeviceInfo` in the
`AirQCoordinator` (instead of recreating the same object for each sensor
of the device in `sensor.AirQSensor`)
- Drop two helper functions in `config_flow.py` and operate on `aioariq.AirQ`
methods directly
* Fix the version of aioairq
* Add 15 more sensors + icons
* Remove cnt* & TypPS, change units of health & performance
* Add 12 more sensors
* Add a missing icon
* Gracefully handle device not being available on setup
If the device and the host are not on the same WiFi,
ServerTimeoutError is raised, which is caught by
ClientConnectionError.
If the device is powered off, ClientConnectionError is expected.
In both cases, ConfigEntryNotReady is raised, as prescribed by the docs.
Newer version of aioairq times-out far quicker than the default 5 mins.
* Rename two sensors
* Validate provided IP address / mDNS
aioairq now raises InvalidInput if provided IP / mDNS does not seem
valid. Handle this exception correctly
* Apply suggestions from code review
Clean up the comments and rename the logger
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
* Only fetch device info during the first refresh
- Fetched info is stored in AirQCoordinator.device_info.
- In `AirQSensor.native_value` only multiply by the factor if
the sensor reading is not None
- Fix the tests for ConfigFlow for aioairq==0.2.3. Specifically
make the dummy data pass the new validation step upstream
+ add a test which fails it
* Drop custom device classes for now
* Apply suggestions from code review
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
* Only fetch device info during ConfigFlow.async_step_user
Store the result obtained by `airq.fetch_device_info` it in
`config_entry.data`. Pass the entire config entry to `AirQCoordinator`
and build the entire `homeassistant.helpers.entity.DeviceInfo` in the
`AirQCoordinator.__init__`. This makes
`AirQCoordinator._async_fetch_device_info` and overloaded
`AirQCoordinator._async_config_entry_first_refresh` obsolete.
Bump aioairq version.
Turn update_interval from `AirQCoordinator.__init__` argument into a
contestant.
* Custom entity description exposing a hook to modify sensor value
Use a `AirQEntityDescription` with a callable `value_fn` which allows to
change the sensor value retrieved from the device. Note that the
callable does not handle data retrieval itself (even from
`coordinator.data`). Instead it is purely a hook to transform obtained
value.
* Avoid duplicated use of unique_id
Device info is fetched during the `ConfigFlow.async_user_step`.
`unique_id` is taken from the device info and is **not** stored
in `config_entry.data`. Subsequently `config_entry.unique_id` is
used instead.
* Drop unnecessary try-except
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
* Clarify the use of value_transform_fn
* Refactor the use of lambdas in AirQEntityDescription
Now it is the job of the callable under `value` to get the sensor
reading from the coordinator's data. Factoring this functionality into a
callback decouples the key of the description from the key of dict,
returned by the API, so `AirQEntityDescription` no longer requires its key
to be set to smth clearly internal (e.g. `nh3_MR100`).
* Use a callback to update native_value
Since all `native_value`s are updated synchronously, it can as well be
done in a callback for better state consistency (right?)
* Revert the description keys to match data keys
Must match given the current way of identifying available sensors. On a
broader scale, they must match to be able to relate the descriptions to
sensors, unless a separate lookup table is maintained.
* Reduce number of loops when adding sensors
Filtering warming up sensors and non-sensor keys can be combined with
adding entities.
* Remove obsolete imports
* Update integrations.json
* Add integration_type
Integration supports multiple devices => hub
Co-authored-by: dl2080 <daniel.lehmann@runbox.com>
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
Co-authored-by: Daniel Lehmann <43613560+dl2080@users.noreply.github.com>
Co-authored-by: Martin Selbmann <job@martin-selbmann.de>
J. Nick Koston