* Update Tesla to use DataUpdateCoordinator
* Update Tesla to use DataUpdateCoordinator
* Fix linting errors
* Apply suggestions from code review
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Address requested changes
* Apply suggestions from code review
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Fix lint errors
* Remove controller from hass.data
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Fix webhook registration
* Only load camera platform with valid scope
* Add initial data handler and netatmo base class
* Update camera to use data handler
* Update init
* Parallelize API calls
* Remove cruft
* Minor tweaks
* Refactor data handler
* Update climate to use data handler
* Fix pylint error
* Fix climate update not getting fresh data
* Update climate data
* update to pyatmo 4.0.0
* Refactor for pyatmo 4.0.0
* Exclude from coverage until tests are written
* Fix typo
* Reduce parallel calls
* Add heating request attr
* Async get_entities
* Undo parallel updates
* Fix camera issue
* Introduce individual scan interval per device class
* Some cleanup
* Add basic webhook support for climate to improve responsiveness
* Replace ClimateDevice by ClimateEntity
* Add support for turning camera on/off
* Update camera state upon webhook events
* Guard data class registration with lock
* Capture errors
* Add light platform
* Add dis-/connect handling
* Fix set schedule service
* Remove extra calls
* Add service to set person(s) home/away
* Add service descriptions
* Improve service descriptions
* Use LightEntity instead of Light
* Add guard if no data is retrieved
* Make services entity based
* Only raise platform not ready if there is a NOC
* Register webhook even during runtime
* Fix turning off event
* Fix linter error
* Fix linter error
* Exclude light platform from coverage
* Change log level
* Refactor public weather sensor to use data handler
* Prevent too short coordinates
* Ignore modules without _id
* Code cleanup
* Fix test
* Exit early if no home data is retrieved
* Prevent discovery if already active
* Add services to (un-)register webhook
* Fix tests
* Not actually a coroutine
* Move methods to base class
* Address pylint comment
* Address pylint complaints
* Address comments
* Address more comments
* Add docstring
* Use single instance allowed
* Extract method
* Remove cruft
* Write state directly
* Fix test
* Add file to coverage
* Move nested function
* Move nested function
* Update docstring
* Clean up code
* Fix webhook bug
* Clean up listeners
* Use deque
* Clean up prints
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Rename data_class variable
* Break when match
* Extract method
* Extract methods
* Rename variable
* Improve comment
* Some refinements
* Extra
* Extract method
* Simplify code
* Improve reability
* Code simplification
* Simplify code
* Simplify code
* Code cleanup
* Fix import
* Clean up
* Clean up magic strings
* Replace data_class_name with CAMERA_DATA_CLASS_NAME
* Replace data_class_name with CAMERA_DATA_CLASS_NAME
* Replace data_class_name with HOMEDATA_DATA_CLASS_NAME
* Replace data_class_name in public weather sensor
* Clean up
* Remove deprecated config options
* Schedule immediate update on camera reconnect
* Use UUID to clearly identify public weather areas
* Use subscription mode
* Move clean up of temporary data classes
* Delay data class removal
* Fix linter complaints
* Adjust test
* Only setup lights if webhook are registered
* Prevent crash with old config entries
* Don't cache home ids
* Remove stale code
* Fix coordinates if entered mixed up by the user
* Move nested function
* Add test case for swapped coordinates
* Only wait for discovery entries
* Only use what I need
* Bring stuff closer to where it's used
* Auto clean up setup data classes
* Code cleanup
* Remove unneccessary lock
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update tests/components/netatmo/test_config_flow.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Clean up dead code
* Fix formating
* Extend coverage
* Extend coverage
Co-authored-by: J. Nick Koston <nick@koston.org>
* Bump the numato-gpio dependency
This relaxes the pyserial dependency to >=3.1.1 as requested by the
project with respect to the upcoming, stricter pip resolver.
* Update numato-gpio due to deprecation of class BinarySensorDevice
* Add new python library
* Update requirements
* Remove old libs
* config flow with client.search_places
* WIP: UI config + weather OK
* WIP: sensors
* WIP: add pressure to weather + available to sensor
* WIP: coordinator next_rain + alert
* Make import step working
* migrate to meteofrance-api v0.0.3
* Create coordinator for rain only if data available in API
* Fix avoid creation of rain sensor when not available.
* Add options flow for forecast mode
* Fix import config causing bug with UI
* Add alert sensor
* Add coastal alerts when available (#5)
* Use meteofrance-api feature branch on Github
* Update unit of next_rain sensor
* Test different type of attibutes
* Typo for attribute
* Next rain sensor device class as timestamp
* Better design for rain entity attributes
* use master branch for meteofrance-api
* time displayed in the HA server timezone.
* fix bug when next_rain_date_locale is None
* Add precipitation and cloud cover sensors
* Add variable to avoid repeating computing
* Apply suggestions from code review
Co-authored-by: Quentame <polletquentin74@me.com>
* Attributes names in const.
* Cleaning
* Cleaning: use current_forecast and today_forecast
* Write state to HA after fetch
* Refactor, Log messages and bug fix. (#6)
* Add messages in log
* Refactor using 'current_forecast'.
* Use % string format with _LOGGER
* Remove inconsistent path
* Secure timestamp value and get current day forecast
* new unique_id
* Change Log message to debug
* Log messages improvement
* Don't try to create weather alert sensor if not in covered zone.
* convert wind speed in km/h
* Better list of city in config_flow
* Manage initial CONF_MODE as None
* Review correction
* Review coorections
* unique id correction
* Migrate from previous config
* Make config name detailed
* Fix weather alert sensor unload (#7)
* Unload weather alert platform
* Revert "Unload weather alert platform"
This reverts commit 95259fdee84f30a5be915eb1fbb2e19fcddc97e4.
* second try in async_unload_entry
* Make it work
* isort modification
* remove weather alert logic in sensor.py
* Refactor to avoid too long code lines
Co-authored-by: Quentin POLLET <polletquentin74@me.com>
* Update config tests to Meteo-France (#18)
* Update meteo_france exception name
* Update MeteoFranceClient name used in tests
* Update 'test_user'
* Make test_user works
* Add test test_user_list
* Make test_import works
* Quick & Dirty fix on exception managment. WIP
* allow to catch MeteoFranceClient() exceptions
* remove test_abort_if_already_setup_district
* bump meteofrance-api version
* We do not need to test Exception in flow yet
* Remove unused data
* Change client1 fixture name
* Change client2 fixture name
* Finish cities step
* Test import with multiple choice
* refactor places
* Add option flow test
Co-authored-by: Quentin POLLET <polletquentin74@me.com>
* Fix errors due to missing data in the API (#22)
* fix case where probability_forecast it not in API
* Workaround for probabilty_forecast data null value
* Fix weather alert sensor added when shouldn't
* Add a partlycloudy and cloudy value options in condition map
* Enable snow chance entity
* fix from review
* remove summary
* Other fix from PR review
* WIP: error if no results in city search
* Add test for config_flow when no result in search
* Lint fix
* generate en.json
* Update homeassistant/components/meteo_france/__init__.py
* Update homeassistant/components/meteo_france/__init__.py
* Update homeassistant/components/meteo_france/__init__.py
* Update homeassistant/components/meteo_france/sensor.py
* Update homeassistant/components/meteo_france/__init__.py
* Update homeassistant/components/meteo_france/__init__.py
* string: city input --> city field
Co-authored-by: Quentin POLLET <polletquentin74@me.com>
bsmappee