mirror of https://github.com/bitcoin/bitcoin
Merge #12331: Docs: Properly alphabetize output of CLI --help option.
d3e467520f Properly alphabetize output of CLI --help option. (murrayn)
Pull request description:
The --help output of bitcoind, bitcoin-cli, bitcoin-tx, qt/bitcoin-qt, et al. is only about 90% alphabetized by option, which is kind of sloppy and occasionally misleading. This change (mostly) organizes the output alphabetically.
Tree-SHA512: 3029900dbe99f03397c1cbdb5e4ac09a13bc99bafe73c6855097206e4cdd9ad70d0b5cedb5e1e520005c3e9ef1c4cd32bb9d8c98ce6918d8434fec8bf06e56c8This commit is contained in:
MarcoFalke
commit
d32528e733
|
|
@ -40,15 +40,15 @@ std::string HelpMessageCli()
|
|||
strUsage += HelpMessageOpt("-getinfo", _("Get general information from the remote server. Note that unlike server-side RPC calls, the results of -getinfo is the result of multiple non-atomic requests. Some entries in the result may represent results from different states (e.g. wallet balance may be as of a different block from the chain state reported)"));
|
||||
AppendParamsHelpMessages(strUsage);
|
||||
strUsage += HelpMessageOpt("-named", strprintf(_("Pass named instead of positional arguments (default: %s)"), DEFAULT_NAMED));
|
||||
strUsage += HelpMessageOpt("-rpcconnect=<ip>", strprintf(_("Send commands to node running on <ip> (default: %s)"), DEFAULT_RPCCONNECT));
|
||||
strUsage += HelpMessageOpt("-rpcport=<port>", strprintf(_("Connect to JSON-RPC on <port> (default: %u or testnet: %u)"), defaultBaseParams->RPCPort(), testnetBaseParams->RPCPort()));
|
||||
strUsage += HelpMessageOpt("-rpcwait", _("Wait for RPC server to start"));
|
||||
strUsage += HelpMessageOpt("-rpcuser=<user>", _("Username for JSON-RPC connections"));
|
||||
strUsage += HelpMessageOpt("-rpcpassword=<pw>", _("Password for JSON-RPC connections"));
|
||||
strUsage += HelpMessageOpt("-rpcclienttimeout=<n>", strprintf(_("Timeout in seconds during HTTP requests, or 0 for no timeout. (default: %d)"), DEFAULT_HTTP_CLIENT_TIMEOUT));
|
||||
strUsage += HelpMessageOpt("-stdinrpcpass", strprintf(_("Read RPC password from standard input as a single line. When combined with -stdin, the first line from standard input is used for the RPC password.")));
|
||||
strUsage += HelpMessageOpt("-stdin", _("Read extra arguments from standard input, one per line until EOF/Ctrl-D (recommended for sensitive information such as passphrases). When combined with -stdinrpcpass, the first line from standard input is used for the RPC password."));
|
||||
strUsage += HelpMessageOpt("-rpcconnect=<ip>", strprintf(_("Send commands to node running on <ip> (default: %s)"), DEFAULT_RPCCONNECT));
|
||||
strUsage += HelpMessageOpt("-rpcpassword=<pw>", _("Password for JSON-RPC connections"));
|
||||
strUsage += HelpMessageOpt("-rpcport=<port>", strprintf(_("Connect to JSON-RPC on <port> (default: %u or testnet: %u)"), defaultBaseParams->RPCPort(), testnetBaseParams->RPCPort()));
|
||||
strUsage += HelpMessageOpt("-rpcuser=<user>", _("Username for JSON-RPC connections"));
|
||||
strUsage += HelpMessageOpt("-rpcwait", _("Wait for RPC server to start"));
|
||||
strUsage += HelpMessageOpt("-rpcwallet=<walletname>", _("Send RPC for non-default wallet on RPC server (argument is wallet filename in bitcoind directory, required if bitcoind/-Qt runs with multiple wallets)"));
|
||||
strUsage += HelpMessageOpt("-stdin", _("Read extra arguments from standard input, one per line until EOF/Ctrl-D (recommended for sensitive information such as passphrases). When combined with -stdinrpcpass, the first line from standard input is used for the RPC password."));
|
||||
strUsage += HelpMessageOpt("-stdinrpcpass", strprintf(_("Read RPC password from standard input as a single line. When combined with -stdin, the first line from standard input is used for the RPC password.")));
|
||||
|
||||
return strUsage;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -77,18 +77,18 @@ static int AppInitRawTx(int argc, char* argv[])
|
|||
strUsage += HelpMessageOpt("in=TXID:VOUT(:SEQUENCE_NUMBER)", _("Add input to TX"));
|
||||
strUsage += HelpMessageOpt("locktime=N", _("Set TX lock time to N"));
|
||||
strUsage += HelpMessageOpt("nversion=N", _("Set TX version to N"));
|
||||
strUsage += HelpMessageOpt("replaceable(=N)", _("Set RBF opt-in sequence number for input N (if not provided, opt-in all available inputs)"));
|
||||
strUsage += HelpMessageOpt("outaddr=VALUE:ADDRESS", _("Add address-based output to TX"));
|
||||
strUsage += HelpMessageOpt("outpubkey=VALUE:PUBKEY[:FLAGS]", _("Add pay-to-pubkey output to TX") + ". " +
|
||||
_("Optionally add the \"W\" flag to produce a pay-to-witness-pubkey-hash output") + ". " +
|
||||
_("Optionally add the \"S\" flag to wrap the output in a pay-to-script-hash."));
|
||||
strUsage += HelpMessageOpt("outdata=[VALUE:]DATA", _("Add data-based output to TX"));
|
||||
strUsage += HelpMessageOpt("outscript=VALUE:SCRIPT[:FLAGS]", _("Add raw script output to TX") + ". " +
|
||||
_("Optionally add the \"W\" flag to produce a pay-to-witness-script-hash output") + ". " +
|
||||
_("Optionally add the \"S\" flag to wrap the output in a pay-to-script-hash."));
|
||||
strUsage += HelpMessageOpt("outmultisig=VALUE:REQUIRED:PUBKEYS:PUBKEY1:PUBKEY2:....[:FLAGS]", _("Add Pay To n-of-m Multi-sig output to TX. n = REQUIRED, m = PUBKEYS") + ". " +
|
||||
_("Optionally add the \"W\" flag to produce a pay-to-witness-script-hash output") + ". " +
|
||||
_("Optionally add the \"S\" flag to wrap the output in a pay-to-script-hash."));
|
||||
strUsage += HelpMessageOpt("outpubkey=VALUE:PUBKEY[:FLAGS]", _("Add pay-to-pubkey output to TX") + ". " +
|
||||
_("Optionally add the \"W\" flag to produce a pay-to-witness-pubkey-hash output") + ". " +
|
||||
_("Optionally add the \"S\" flag to wrap the output in a pay-to-script-hash."));
|
||||
strUsage += HelpMessageOpt("outscript=VALUE:SCRIPT[:FLAGS]", _("Add raw script output to TX") + ". " +
|
||||
_("Optionally add the \"W\" flag to produce a pay-to-witness-script-hash output") + ". " +
|
||||
_("Optionally add the \"S\" flag to wrap the output in a pay-to-script-hash."));
|
||||
strUsage += HelpMessageOpt("replaceable(=N)", _("Set RBF opt-in sequence number for input N (if not provided, opt-in all available inputs)"));
|
||||
strUsage += HelpMessageOpt("sign=SIGHASH-FLAGS", _("Add zero or more signatures to transaction") + ". " +
|
||||
_("This command requires JSON registers:") +
|
||||
_("prevtxs=JSON object") + ", " +
|
||||
|
|
|
|||
|
|
@ -17,11 +17,11 @@ const std::string CBaseChainParams::REGTEST = "regtest";
|
|||
void AppendParamsHelpMessages(std::string& strUsage, bool debugHelp)
|
||||
{
|
||||
strUsage += HelpMessageGroup(_("Chain selection options:"));
|
||||
strUsage += HelpMessageOpt("-testnet", _("Use the test chain"));
|
||||
if (debugHelp) {
|
||||
strUsage += HelpMessageOpt("-regtest", "Enter regression test mode, which uses a special chain in which blocks can be solved instantly. "
|
||||
"This is intended for regression testing tools and app development.");
|
||||
}
|
||||
strUsage += HelpMessageOpt("-testnet", _("Use the test chain"));
|
||||
}
|
||||
|
||||
/**
|
||||
|
|
|
|||
40
src/init.cpp
40
src/init.cpp
|
|
@ -331,10 +331,11 @@ std::string HelpMessage(HelpMessageMode mode)
|
|||
strUsage += HelpMessageOpt("-?", _("Print this help message and exit"));
|
||||
strUsage += HelpMessageOpt("-version", _("Print version and exit"));
|
||||
strUsage += HelpMessageOpt("-alertnotify=<cmd>", _("Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)"));
|
||||
strUsage +=HelpMessageOpt("-assumevalid=<hex>", strprintf(_("If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: %s, testnet: %s)"), defaultChainParams->GetConsensus().defaultAssumeValid.GetHex(), testnetChainParams->GetConsensus().defaultAssumeValid.GetHex()));
|
||||
strUsage += HelpMessageOpt("-blocknotify=<cmd>", _("Execute command when the best block changes (%s in cmd is replaced by block hash)"));
|
||||
strUsage += HelpMessageOpt("-blockreconstructionextratxn=<n>", strprintf(_("Extra transactions to keep in memory for compact block reconstructions (default: %u)"), DEFAULT_BLOCK_RECONSTRUCTION_EXTRA_TXN));
|
||||
if (showDebug)
|
||||
strUsage += HelpMessageOpt("-blocksonly", strprintf(_("Whether to operate in a blocks only mode (default: %u)"), DEFAULT_BLOCKSONLY));
|
||||
strUsage +=HelpMessageOpt("-assumevalid=<hex>", strprintf(_("If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: %s, testnet: %s)"), defaultChainParams->GetConsensus().defaultAssumeValid.GetHex(), testnetChainParams->GetConsensus().defaultAssumeValid.GetHex()));
|
||||
strUsage += HelpMessageOpt("-conf=<file>", strprintf(_("Specify configuration file (default: %s)"), BITCOIN_CONF_FILENAME));
|
||||
if (mode == HMM_BITCOIND)
|
||||
{
|
||||
|
|
@ -347,28 +348,27 @@ std::string HelpMessage(HelpMessageMode mode)
|
|||
strUsage += HelpMessageOpt("-dbbatchsize", strprintf("Maximum database write batch size in bytes (default: %u)", nDefaultDbBatchSize));
|
||||
}
|
||||
strUsage += HelpMessageOpt("-dbcache=<n>", strprintf(_("Set database cache size in megabytes (%d to %d, default: %d)"), nMinDbCache, nMaxDbCache, nDefaultDbCache));
|
||||
strUsage += HelpMessageOpt("-debuglogfile=<file>", strprintf(_("Specify location of debug log file: this can be an absolute path or a path relative to the data directory (default: %s)"), DEFAULT_DEBUGLOGFILE));
|
||||
if (showDebug)
|
||||
strUsage += HelpMessageOpt("-feefilter", strprintf("Tell other nodes to filter invs to us by our mempool min fee (default: %u)", DEFAULT_FEEFILTER));
|
||||
strUsage += HelpMessageOpt("-loadblock=<file>", _("Imports blocks from external blk000??.dat file on startup"));
|
||||
strUsage += HelpMessageOpt("-debuglogfile=<file>", strprintf(_("Specify location of debug log file: this can be an absolute path or a path relative to the data directory (default: %s)"), DEFAULT_DEBUGLOGFILE));
|
||||
strUsage += HelpMessageOpt("-maxorphantx=<n>", strprintf(_("Keep at most <n> unconnectable transactions in memory (default: %u)"), DEFAULT_MAX_ORPHAN_TRANSACTIONS));
|
||||
strUsage += HelpMessageOpt("-maxmempool=<n>", strprintf(_("Keep the transaction memory pool below <n> megabytes (default: %u)"), DEFAULT_MAX_MEMPOOL_SIZE));
|
||||
strUsage += HelpMessageOpt("-maxorphantx=<n>", strprintf(_("Keep at most <n> unconnectable transactions in memory (default: %u)"), DEFAULT_MAX_ORPHAN_TRANSACTIONS));
|
||||
strUsage += HelpMessageOpt("-mempoolexpiry=<n>", strprintf(_("Do not keep transactions in the mempool longer than <n> hours (default: %u)"), DEFAULT_MEMPOOL_EXPIRY));
|
||||
if (showDebug) {
|
||||
strUsage += HelpMessageOpt("-minimumchainwork=<hex>", strprintf("Minimum work assumed to exist on a valid chain in hex (default: %s, testnet: %s)", defaultChainParams->GetConsensus().nMinimumChainWork.GetHex(), testnetChainParams->GetConsensus().nMinimumChainWork.GetHex()));
|
||||
}
|
||||
strUsage += HelpMessageOpt("-persistmempool", strprintf(_("Whether to save the mempool on shutdown and load on restart (default: %u)"), DEFAULT_PERSIST_MEMPOOL));
|
||||
strUsage += HelpMessageOpt("-blockreconstructionextratxn=<n>", strprintf(_("Extra transactions to keep in memory for compact block reconstructions (default: %u)"), DEFAULT_BLOCK_RECONSTRUCTION_EXTRA_TXN));
|
||||
strUsage += HelpMessageOpt("-par=<n>", strprintf(_("Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d)"),
|
||||
-GetNumCores(), MAX_SCRIPTCHECK_THREADS, DEFAULT_SCRIPTCHECK_THREADS));
|
||||
strUsage += HelpMessageOpt("-persistmempool", strprintf(_("Whether to save the mempool on shutdown and load on restart (default: %u)"), DEFAULT_PERSIST_MEMPOOL));
|
||||
#ifndef WIN32
|
||||
strUsage += HelpMessageOpt("-pid=<file>", strprintf(_("Specify pid file (default: %s)"), BITCOIN_PID_FILENAME));
|
||||
#endif
|
||||
strUsage += HelpMessageOpt("-prune=<n>", strprintf(_("Reduce storage requirements by enabling pruning (deleting) of old blocks. This allows the pruneblockchain RPC to be called to delete specific blocks, and enables automatic pruning of old blocks if a target size in MiB is provided. This mode is incompatible with -txindex and -rescan. "
|
||||
"Warning: Reverting this setting requires re-downloading the entire blockchain. "
|
||||
"(default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >%u = automatically prune block files to stay under the specified target size in MiB)"), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024));
|
||||
strUsage += HelpMessageOpt("-reindex-chainstate", _("Rebuild chain state from the currently indexed blocks"));
|
||||
strUsage += HelpMessageOpt("-reindex", _("Rebuild chain state and block index from the blk*.dat files on disk"));
|
||||
strUsage += HelpMessageOpt("-reindex-chainstate", _("Rebuild chain state from the currently indexed blocks"));
|
||||
#ifndef WIN32
|
||||
strUsage += HelpMessageOpt("-sysperms", _("Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality)"));
|
||||
#endif
|
||||
|
|
@ -391,10 +391,11 @@ std::string HelpMessage(HelpMessageMode mode)
|
|||
strUsage += HelpMessageOpt("-maxreceivebuffer=<n>", strprintf(_("Maximum per-connection receive buffer, <n>*1000 bytes (default: %u)"), DEFAULT_MAXRECEIVEBUFFER));
|
||||
strUsage += HelpMessageOpt("-maxsendbuffer=<n>", strprintf(_("Maximum per-connection send buffer, <n>*1000 bytes (default: %u)"), DEFAULT_MAXSENDBUFFER));
|
||||
strUsage += HelpMessageOpt("-maxtimeadjustment", strprintf(_("Maximum allowed median peer time offset adjustment. Local perspective of time may be influenced by peers forward or backward by this amount. (default: %u seconds)"), DEFAULT_MAX_TIME_ADJUSTMENT));
|
||||
strUsage += HelpMessageOpt("-maxuploadtarget=<n>", strprintf(_("Tries to keep outbound traffic under the given target (in MiB per 24h), 0 = no limit (default: %d)"), DEFAULT_MAX_UPLOAD_TARGET));
|
||||
strUsage += HelpMessageOpt("-onion=<ip:port>", strprintf(_("Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s)"), "-proxy"));
|
||||
strUsage += HelpMessageOpt("-onlynet=<net>", _("Only connect to nodes in network <net> (ipv4, ipv6 or onion)"));
|
||||
strUsage += HelpMessageOpt("-permitbaremultisig", strprintf(_("Relay non-P2SH multisig (default: %u)"), DEFAULT_PERMIT_BAREMULTISIG));
|
||||
strUsage += HelpMessageOpt("-peerbloomfilters", strprintf(_("Support filtering of blocks and transaction with bloom filters (default: %u)"), DEFAULT_PEERBLOOMFILTERS));
|
||||
strUsage += HelpMessageOpt("-permitbaremultisig", strprintf(_("Relay non-P2SH multisig (default: %u)"), DEFAULT_PERMIT_BAREMULTISIG));
|
||||
strUsage += HelpMessageOpt("-port=<port>", strprintf(_("Listen for connections on <port> (default: %u or testnet: %u)"), defaultChainParams->GetDefaultPort(), testnetChainParams->GetDefaultPort()));
|
||||
strUsage += HelpMessageOpt("-proxy=<ip:port>", _("Connect through SOCKS5 proxy"));
|
||||
strUsage += HelpMessageOpt("-proxyrandomize", strprintf(_("Randomize credentials for every proxy connection. This enables Tor stream isolation (default: %u)"), DEFAULT_PROXYRANDOMIZE));
|
||||
|
|
@ -412,7 +413,6 @@ std::string HelpMessage(HelpMessageMode mode)
|
|||
strUsage += HelpMessageOpt("-whitebind=<addr>", _("Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6"));
|
||||
strUsage += HelpMessageOpt("-whitelist=<IP address or network>", _("Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple times.") +
|
||||
" " + _("Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway"));
|
||||
strUsage += HelpMessageOpt("-maxuploadtarget=<n>", strprintf(_("Tries to keep outbound traffic under the given target (in MiB per 24h), 0 = no limit (default: %d)"), DEFAULT_MAX_UPLOAD_TARGET));
|
||||
|
||||
#ifdef ENABLE_WALLET
|
||||
strUsage += GetWalletHelpString(showDebug);
|
||||
|
|
@ -427,7 +427,6 @@ std::string HelpMessage(HelpMessageMode mode)
|
|||
#endif
|
||||
|
||||
strUsage += HelpMessageGroup(_("Debugging/Testing options:"));
|
||||
strUsage += HelpMessageOpt("-uacomment=<cmt>", _("Append comment to the user agent string"));
|
||||
if (showDebug)
|
||||
{
|
||||
strUsage += HelpMessageOpt("-checkblocks=<n>", strprintf(_("How many blocks to check at startup (default: %u, 0 = all)"), DEFAULT_CHECKBLOCKS));
|
||||
|
|
@ -464,12 +463,13 @@ std::string HelpMessage(HelpMessageMode mode)
|
|||
}
|
||||
strUsage += HelpMessageOpt("-maxtxfee=<amt>", strprintf(_("Maximum total fees (in %s) to use in a single wallet transaction or raw transaction; setting this too low may abort large transactions (default: %s)"),
|
||||
CURRENCY_UNIT, FormatMoney(DEFAULT_TRANSACTION_MAXFEE)));
|
||||
strUsage += HelpMessageOpt("-printtoconsole", _("Send trace/debug info to console instead of debug.log file"));
|
||||
if (showDebug)
|
||||
{
|
||||
strUsage += HelpMessageOpt("-printpriority", strprintf("Log transaction fee per kB when mining blocks (default: %u)", DEFAULT_PRINTPRIORITY));
|
||||
}
|
||||
strUsage += HelpMessageOpt("-printtoconsole", _("Send trace/debug info to console instead of debug.log file"));
|
||||
strUsage += HelpMessageOpt("-shrinkdebugfile", _("Shrink debug.log file on client startup (default: 1 when no -debug)"));
|
||||
strUsage += HelpMessageOpt("-uacomment=<cmt>", _("Append comment to the user agent string"));
|
||||
|
||||
AppendParamsHelpMessages(strUsage, showDebug);
|
||||
|
||||
|
|
@ -485,32 +485,32 @@ std::string HelpMessage(HelpMessageMode mode)
|
|||
strUsage += HelpMessageOpt("-mempoolreplacement", strprintf(_("Enable transaction replacement in the memory pool (default: %u)"), DEFAULT_ENABLE_REPLACEMENT));
|
||||
strUsage += HelpMessageOpt("-minrelaytxfee=<amt>", strprintf(_("Fees (in %s/kB) smaller than this are considered zero fee for relaying, mining and transaction creation (default: %s)"),
|
||||
CURRENCY_UNIT, FormatMoney(DEFAULT_MIN_RELAY_TX_FEE)));
|
||||
strUsage += HelpMessageOpt("-whitelistrelay", strprintf(_("Accept relayed transactions received from whitelisted peers even when not relaying transactions (default: %d)"), DEFAULT_WHITELISTRELAY));
|
||||
strUsage += HelpMessageOpt("-whitelistforcerelay", strprintf(_("Force relay of transactions from whitelisted peers even if they violate local relay policy (default: %d)"), DEFAULT_WHITELISTFORCERELAY));
|
||||
strUsage += HelpMessageOpt("-whitelistrelay", strprintf(_("Accept relayed transactions received from whitelisted peers even when not relaying transactions (default: %d)"), DEFAULT_WHITELISTRELAY));
|
||||
|
||||
strUsage += HelpMessageGroup(_("Block creation options:"));
|
||||
strUsage += HelpMessageOpt("-blockmaxweight=<n>", strprintf(_("Set maximum BIP141 block weight (default: %d)"), DEFAULT_BLOCK_MAX_WEIGHT));
|
||||
strUsage += HelpMessageOpt("-blockmaxsize=<n>", _("Set maximum BIP141 block weight to this * 4. Deprecated, use blockmaxweight"));
|
||||
strUsage += HelpMessageOpt("-blockmaxweight=<n>", strprintf(_("Set maximum BIP141 block weight (default: %d)"), DEFAULT_BLOCK_MAX_WEIGHT));
|
||||
strUsage += HelpMessageOpt("-blockmintxfee=<amt>", strprintf(_("Set lowest fee rate (in %s/kB) for transactions to be included in block creation. (default: %s)"), CURRENCY_UNIT, FormatMoney(DEFAULT_BLOCK_MIN_TX_FEE)));
|
||||
if (showDebug)
|
||||
strUsage += HelpMessageOpt("-blockversion=<n>", "Override block version to test forking scenarios");
|
||||
|
||||
strUsage += HelpMessageGroup(_("RPC server options:"));
|
||||
strUsage += HelpMessageOpt("-server", _("Accept command line and JSON-RPC commands"));
|
||||
strUsage += HelpMessageOpt("-rest", strprintf(_("Accept public REST requests (default: %u)"), DEFAULT_REST_ENABLE));
|
||||
strUsage += HelpMessageOpt("-rpcallowip=<ip>", _("Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times"));
|
||||
strUsage += HelpMessageOpt("-rpcauth=<userpw>", _("Username and hashed password for JSON-RPC connections. The field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A canonical python script is included in share/rpcuser. The client then connects normally using the rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This option can be specified multiple times"));
|
||||
strUsage += HelpMessageOpt("-rpcbind=<addr>[:port]", _("Bind to given address to listen for JSON-RPC connections. This option is ignored unless -rpcallowip is also passed. Port is optional and overrides -rpcport. Use [host]:port notation for IPv6. This option can be specified multiple times (default: 127.0.0.1 and ::1 i.e., localhost, or if -rpcallowip has been specified, 0.0.0.0 and :: i.e., all addresses)"));
|
||||
strUsage += HelpMessageOpt("-rpccookiefile=<loc>", _("Location of the auth cookie (default: data dir)"));
|
||||
strUsage += HelpMessageOpt("-rpcuser=<user>", _("Username for JSON-RPC connections"));
|
||||
strUsage += HelpMessageOpt("-rpcpassword=<pw>", _("Password for JSON-RPC connections"));
|
||||
strUsage += HelpMessageOpt("-rpcauth=<userpw>", _("Username and hashed password for JSON-RPC connections. The field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A canonical python script is included in share/rpcuser. The client then connects normally using the rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This option can be specified multiple times"));
|
||||
strUsage += HelpMessageOpt("-rpcport=<port>", strprintf(_("Listen for JSON-RPC connections on <port> (default: %u or testnet: %u)"), defaultBaseParams->RPCPort(), testnetBaseParams->RPCPort()));
|
||||
strUsage += HelpMessageOpt("-rpcallowip=<ip>", _("Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times"));
|
||||
strUsage += HelpMessageOpt("-rpcserialversion", strprintf(_("Sets the serialization of raw transaction or block hex returned in non-verbose mode, non-segwit(0) or segwit(1) (default: %d)"), DEFAULT_RPC_SERIALIZE_VERSION));
|
||||
strUsage += HelpMessageOpt("-rpcthreads=<n>", strprintf(_("Set the number of threads to service RPC calls (default: %d)"), DEFAULT_HTTP_THREADS));
|
||||
if (showDebug) {
|
||||
strUsage += HelpMessageOpt("-rpcworkqueue=<n>", strprintf("Set the depth of the work queue to service RPC calls (default: %d)", DEFAULT_HTTP_WORKQUEUE));
|
||||
if (showDebug)
|
||||
strUsage += HelpMessageOpt("-rpcservertimeout=<n>", strprintf("Timeout during HTTP requests (default: %d)", DEFAULT_HTTP_SERVER_TIMEOUT));
|
||||
}
|
||||
strUsage += HelpMessageOpt("-rpcthreads=<n>", strprintf(_("Set the number of threads to service RPC calls (default: %d)"), DEFAULT_HTTP_THREADS));
|
||||
strUsage += HelpMessageOpt("-rpcuser=<user>", _("Username for JSON-RPC connections"));
|
||||
if (showDebug)
|
||||
strUsage += HelpMessageOpt("-rpcworkqueue=<n>", strprintf("Set the depth of the work queue to service RPC calls (default: %d)", DEFAULT_HTTP_WORKQUEUE));
|
||||
strUsage += HelpMessageOpt("-server", _("Accept command line and JSON-RPC commands"));
|
||||
|
||||
return strUsage;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -86,9 +86,9 @@ HelpMessageDialog::HelpMessageDialog(QWidget *parent, bool about) :
|
|||
strUsage += HelpMessageOpt("-choosedatadir", strprintf(tr("Choose data directory on startup (default: %u)").toStdString(), DEFAULT_CHOOSE_DATADIR));
|
||||
strUsage += HelpMessageOpt("-lang=<lang>", tr("Set language, for example \"de_DE\" (default: system locale)").toStdString());
|
||||
strUsage += HelpMessageOpt("-min", tr("Start minimized").toStdString());
|
||||
strUsage += HelpMessageOpt("-resetguisettings", tr("Reset all settings changed in the GUI").toStdString());
|
||||
strUsage += HelpMessageOpt("-rootcertificates=<file>", tr("Set SSL root certificates for payment request (default: -system-)").toStdString());
|
||||
strUsage += HelpMessageOpt("-splash", strprintf(tr("Show splash screen on startup (default: %u)").toStdString(), DEFAULT_SPLASHSCREEN));
|
||||
strUsage += HelpMessageOpt("-resetguisettings", tr("Reset all settings changed in the GUI").toStdString());
|
||||
if (showDebug) {
|
||||
strUsage += HelpMessageOpt("-uiplatform", strprintf("Select platform to customize UI for (one of windows, macosx, other; default: %s)", BitcoinGUI::DEFAULT_UIPLATFORM));
|
||||
}
|
||||
|
|
|
|||
|
|
@ -19,12 +19,12 @@ std::string GetWalletHelpString(bool showDebug)
|
|||
strUsage += HelpMessageOpt("-addresstype", strprintf("What type of addresses to use (\"legacy\", \"p2sh-segwit\", or \"bech32\", default: \"%s\")", FormatOutputType(OUTPUT_TYPE_DEFAULT)));
|
||||
strUsage += HelpMessageOpt("-changetype", "What type of change to use (\"legacy\", \"p2sh-segwit\", or \"bech32\"). Default is same as -addresstype, except when -addresstype=p2sh-segwit a native segwit output is used when sending to a native segwit address)");
|
||||
strUsage += HelpMessageOpt("-disablewallet", _("Do not load the wallet and disable wallet RPC calls"));
|
||||
strUsage += HelpMessageOpt("-keypool=<n>", strprintf(_("Set key pool size to <n> (default: %u)"), DEFAULT_KEYPOOL_SIZE));
|
||||
strUsage += HelpMessageOpt("-fallbackfee=<amt>", strprintf(_("A fee rate (in %s/kB) that will be used when fee estimation has insufficient data (default: %s)"),
|
||||
CURRENCY_UNIT, FormatMoney(DEFAULT_FALLBACK_FEE)));
|
||||
strUsage += HelpMessageOpt("-discardfee=<amt>", strprintf(_("The fee rate (in %s/kB) that indicates your tolerance for discarding change by adding it to the fee (default: %s). "
|
||||
"Note: An output is discarded if it is dust at this rate, but we will always discard up to the dust relay fee and a discard fee above that is limited by the fee estimate for the longest target"),
|
||||
CURRENCY_UNIT, FormatMoney(DEFAULT_DISCARD_FEE)));
|
||||
strUsage += HelpMessageOpt("-fallbackfee=<amt>", strprintf(_("A fee rate (in %s/kB) that will be used when fee estimation has insufficient data (default: %s)"),
|
||||
CURRENCY_UNIT, FormatMoney(DEFAULT_FALLBACK_FEE)));
|
||||
strUsage += HelpMessageOpt("-keypool=<n>", strprintf(_("Set key pool size to <n> (default: %u)"), DEFAULT_KEYPOOL_SIZE));
|
||||
strUsage += HelpMessageOpt("-mintxfee=<amt>", strprintf(_("Fees (in %s/kB) smaller than this are considered zero fee for transaction creation (default: %s)"),
|
||||
CURRENCY_UNIT, FormatMoney(DEFAULT_TRANSACTION_MINFEE)));
|
||||
strUsage += HelpMessageOpt("-paytxfee=<amt>", strprintf(_("Fee (in %s/kB) to add to transactions you send (default: %s)"),
|
||||
|
|
@ -33,12 +33,12 @@ std::string GetWalletHelpString(bool showDebug)
|
|||
strUsage += HelpMessageOpt("-salvagewallet", _("Attempt to recover private keys from a corrupt wallet on startup"));
|
||||
strUsage += HelpMessageOpt("-spendzeroconfchange", strprintf(_("Spend unconfirmed change when sending transactions (default: %u)"), DEFAULT_SPEND_ZEROCONF_CHANGE));
|
||||
strUsage += HelpMessageOpt("-txconfirmtarget=<n>", strprintf(_("If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: %u)"), DEFAULT_TX_CONFIRM_TARGET));
|
||||
strUsage += HelpMessageOpt("-walletrbf", strprintf(_("Send transactions with full-RBF opt-in enabled (RPC only, default: %u)"), DEFAULT_WALLET_RBF));
|
||||
strUsage += HelpMessageOpt("-upgradewallet", _("Upgrade wallet to latest format on startup"));
|
||||
strUsage += HelpMessageOpt("-wallet=<file>", _("Specify wallet file (within data directory)") + " " + strprintf(_("(default: %s)"), DEFAULT_WALLET_DAT));
|
||||
strUsage += HelpMessageOpt("-walletbroadcast", _("Make the wallet broadcast transactions") + " " + strprintf(_("(default: %u)"), DEFAULT_WALLETBROADCAST));
|
||||
strUsage += HelpMessageOpt("-walletdir=<dir>", _("Specify directory to hold wallets (default: <datadir>/wallets if it exists, otherwise <datadir>)"));
|
||||
strUsage += HelpMessageOpt("-walletnotify=<cmd>", _("Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)"));
|
||||
strUsage += HelpMessageOpt("-walletrbf", strprintf(_("Send transactions with full-RBF opt-in enabled (RPC only, default: %u)"), DEFAULT_WALLET_RBF));
|
||||
strUsage += HelpMessageOpt("-zapwallettxes=<mode>", _("Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup") +
|
||||
" " + _("(1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data)"));
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue