github/OTGW-firmware
1
Fork 0
mirror of https://github.com/rvdbreemen/OTGW-firmware synced 2024-11-16 04:33:49 +01:00
Code Releases Activity
f901303adb
OTGW-firmware/OTGW-Core.h
Robert van den Breemen f901303adb update version to 0.8.4
2021-05-02 17:56:14 +02:00

519 lines
29 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
***************************************************************************
** Program : Header file: OTGW-Core.h
** Version : v0.8.4
**
** Copyright (c) 2021 Robert van den Breemen
** Borrowed from OpenTherm library from:
** https://github.com/jpraus/arduino-opentherm
**
** TERMS OF USE: MIT License. See bottom of file.
***************************************************************************
*/
#ifndef OTGWCore_h
#define OTGWCore_h
// OTGW Serial 2 network port
// #include <TelnetStream.h> // https://github.com/jandrassy/TelnetStream/commit/1294a9ee5cc9b1f7e51005091e351d60c8cddecf
#define OTGW_SERIAL_PORT 25238 // changed the port to original default of OTmonitor
TelnetStreamClass OTGWstream(OTGW_SERIAL_PORT);
//Depends on the library
#define OTGW_COMMAND_TOPIC "command"
typedef struct {
uint16_t Statusflags = 0; // flag8 / flag8 Master and Slave Status flags.
float TSet = 0.0; // f8.8 Control setpoint ie CH water temperature setpoint (°C)
uint16_t MasterConfigMemberIDcode = 0; // flag8 / u8 Master Configuration Flags / Master MemberID Code
uint16_t SlaveConfigMemberIDcode = 0; // flag8 / u8 Slave Configuration Flags / Slave MemberID Code
uint16_t Command = 0; // u8 / u8 Remote Command
uint16_t ASFflags = 0; // / OEM-fault-code flag8 / u8 Application-specific fault flags and OEM fault code
uint16_t RBPflags = 0; // flag8 / flag8 Remote boiler parameter transfer-enable & read/write flags
float CoolingControl = 0.0 ; // f8.8 Cooling control signal (%)
float TsetCH2 = 0.0 ; // f8.8 Control setpoint for 2e CH circuit (°C)
float TrOverride = 0.0 ; // f8.8 Remote override room setpoint
uint16_t TSP = 0; // u8 / u8 Number of Transparent-Slave-Parameters supported by slave
uint16_t TSPindexTSPvalue = 0; // u8 / u8 Index number / Value of referred-to transparent slave parameter.
uint16_t FHBsize = 0; // u8 / u8 Size of Fault-History-Buffer supported by slave
uint16_t FHBindexFHBvalue = 0; // u8 / u8 Index number / Value of referred-to fault-history buffer entry.
float MaxRelModLevelSetting = 0.0 ; // f8.8 Maximum relative modulation level setting (%)
uint16_t MaxCapacityMinModLevel = 0; // u8 / u8 Maximum boiler capacity (kW) / Minimum boiler modulation level(%)
float TrSet = 0.0 ; // f8.8 Room Setpoint (°C)
float RelModLevel = 0.0 ; // f8.8 Relative Modulation Level (%)
float CHPressure = 0.0 ; // f8.8 Water pressure in CH circuit (bar)
float DHWFlowRate = 0.0 ; // f8.8 Water flow rate in DHW circuit. (litres/minute)
uint16_t DayTime = 0; // special / u8 Day of Week and Time of Day
uint16_t Date = 0; // u8 / u8 Calendar date
uint16_t Year = 0; // u16 Calendar year
float TrSetCH2 = 0.0 ; // f8.8 Room Setpoint for 2nd CH circuit (°C)
float Tr = 0.0 ; // f8.8 Room temperature (°C)
float Tboiler = 0.0 ; // f8.8 Boiler flow water temperature (°C)
float Tdhw = 0.0 ; // f8.8 DHW temperature (°C)
float Toutside = 0.0 ; // f8.8 Outside temperature (°C)
float Tret = 0.0 ; // f8.8 Return water temperature (°C)
float Tsolarstorage = 0.0 ; // f8.8 Solar storage temperature (°C)
int16_t Tsolarcollector = 0.0 ; // s16 Solar collector temperature (°C)
float TflowCH2 = 0.0 ; // f8.8 Flow water temperature CH2 circuit (°C)
float Tdhw2 = 0.0 ; // f8.8 Domestic hot water temperature 2 (°C)
int16_t Texhaust = 0; // s16 Boiler exhaust temperature (°C)
uint16_t FanSpeed = 0; // u16 Fan Speed (rpm)
float ElectricalCurrentBurnerFlame = 0.0; // f88 Electrical current through burner flame (µA)
float TRoomCH2= 0.0; // f88 Room Temperature for 2nd CH circuit ("°C)
uint16_t RelativeHumidity = 0; // u8 / u8 Relative Humidity (%)
uint16_t TdhwSetUBTdhwSetLB = 0 ; // s8 / s8 DHW setpoint upper & lower bounds for adjustment (°C)
uint16_t MaxTSetUBMaxTSetLB = 0; // s8 / s8 Max CH water setpoint upper & lower bounds for adjustment (°C)
uint16_t HcratioUBHcratioLB = 0; // s8 / s8 OTC heat curve ratio upper & lower bounds for adjustment
float TdhwSet = 0.0 ; // f8.8 DHW setpoint (°C) (Remote parameter 1)
float MaxTSet = 0.0 ; // f8.8 Max CH water setpoint (°C) (Remote parameters 2)
float Hcratio = 0.0 ; // f8.8 OTC heat curve ratio (°C) (Remote parameter 3)
//RF
uint16_t RFstrengthbatterylevel = 0; // u8/ u8 RF strength and battery level
uint16_t OperatingMode_HC1_HC2_DHW = 0; // u8 / u8 Operating Mode HC1, HC2/ DHW
uint16_t RoomRemoteOverrideFunction = 0; // Function of manual and program changes in master and remote room setpoint
//Electric Producer
uint16_t ElectricityProducerStarts = 0; // u16 Electricity producer starts
uint16_t ElectricityProducerHours = 0; // u16 Electricity producer hours
uint16_t ElectricityProduction = 0; // u16 Electricity production
uint16_t CumulativElectricityProduction = 0; // u16 Cumulativ Electricity production
//Solar Storage
uint16_t SolarStorageMaster = 0;
uint16_t SolarStorageASFflags = 0;
uint16_t SolarStorageSlaveConfigMemberIDcode = 0;
uint16_t SolarStorageVersionType = 0;
uint16_t SolarStorageTSP = 0;
uint16_t SolarStorageTSPindexTSPvalue = 0;
uint16_t SolarStorageFHBsize = 0;
uint16_t SolarStorageFHBindexFHBvalue = 0;
//Ventilation/HeatRecovery Msgids
uint16_t StatusVH = 0;
uint16_t ControlSetpointVH = 0; //should be uint8_t
uint16_t ASFFaultCodeVH = 0;
uint16_t DiagnosticCodeVH = 0;
uint16_t ConfigMemberIDVH = 0;
float OpenthermVersionVH = 0.0;
uint16_t VersionTypeVH = 0;
uint16_t RelativeVentilation = 0;
uint16_t RelativeHumidityExhaustAir = 0;
uint16_t CO2LevelExhaustAir = 0;
float SupplyInletTemperature = 0.0;
float SupplyOutletTemperature = 0.0;
float ExhaustInletTemperature = 0.0;
float ExhaustOutletTemperature = 0.0;
uint16_t ActualExhaustFanSpeed = 0;
uint16_t ActualSupplyFanSpeed = 0;
uint16_t RemoteParameterSettingVH = 0;
uint16_t NominalVentilationValue = 0;
uint16_t TSPNumberVH = 0;
uint16_t TSPEntryVH = 0;
uint16_t FaultBufferSizeVH = 0;
uint16_t FaultBufferEntryVH = 0;
//Statitics
uint16_t BurnerUnsuccessfulStarts = 0;
uint16_t FlameSignalTooLow = 0;
uint16_t RemoteOverrideFunction = 0; // flag8 / - Function of manual and program changes in master and remote room setpoint.
uint16_t OEMDiagnosticCode = 0; // u16 OEM-specific diagnostic/service code
uint16_t BurnerStarts = 0; // u16 Number of starts burner
uint16_t CHPumpStarts = 0; // u16 Number of starts CH pump
uint16_t DHWPumpValveStarts = 0; // u16 Number of starts DHW pump/valve
uint16_t DHWBurnerStarts = 0; // u16 Number of starts burner during DHW mode
uint16_t BurnerOperationHours = 0; // u16 Number of hours that burner is in operation (i.e. flame on)
uint16_t CHPumpOperationHours = 0; // u16 Number of hours that CH pump has been running
uint16_t DHWPumpValveOperationHours = 0; // u16 Number of hours that DHW pump has been running or DHW valve has been opened
uint16_t DHWBurnerOperationHours = 0; // u16 Number of hours that burner is in operation during DHW mode
float OpenThermVersionMaster = 0.0 ; // f8.8 The implemented version of the OpenTherm Protocol Specification in the master.
float OpenThermVersionSlave = 0.0 ; // f8.8 The implemented version of the OpenTherm Protocol Specification in the slave.
uint16_t MasterVersion = 0; // u8 / u8 Master product version number and type
uint16_t SlaveVersion = 0; // u8 / u8 Slave product version number and type
//Rehmea
uint16_t RemehadFdUcodes = 0; // u16 Remeha dF-/dU-codes
uint16_t RemehaServicemessage = 0; // u16 Remeha Servicemessage
uint16_t RemehaDetectionConnectedSCU =0; // u16 Remeha detection connected SCU’s
//errors
uint16_t error01 = 0;
uint16_t error02 = 0;
uint16_t error03 = 0;
uint16_t error04 = 0;
} OTdataStruct;
static OTdataStruct OTdataObject;
enum OpenThermResponseStatus {
OT_NONE,
OT_SUCCESS,
OT_INVALID,
OT_TIMEOUT
};
enum OpenThermMessageType {
/* Master to Slave */
OT_READ_DATA = B000,
OT_WRITE_DATA = B001,
OT_INVALID_DATA = B010,
OT_RESERVED = B011,
/* Slave to Master */
OT_READ_ACK = B100,
OT_WRITE_ACK = B101,
OT_DATA_INVALID = B110,
OT_UNKNOWN_DATA_ID = B111
};
enum OpenThermMessageID {
OT_Statusflags, // flag8 / flag8 Master and Slave Status flags.
OT_TSet, // f8.8 Control setpoint ie CH water temperature setpoint (°C)
OT_MasterConfigMemberIDcode, // flag8 / u8 Master Configuration Flags / Master MemberID Code
OT_SlaveConfigMemberIDcode, // flag8 / u8 Slave Configuration Flags / Slave MemberID Code
OT_Command, // u8 / u8 Remote Command
OT_ASFflags, // / OEM-fault-code flag8 / u8 Application-specific fault flags and OEM fault code
OT_RBPflags, // flag8 / flag8 Remote boiler parameter transfer-enable & read/write flags
OT_CoolingControl, // f8.8 Cooling control signal (%)
OT_TsetCH2, // f8.8 Control setpoint for 2e CH circuit (°C)
OT_TrOverride, // f8.8 Remote override room setpoint
OT_TSP, // u8 / u8 Number of Transparent-Slave-Parameters supported by slave
OT_TSPindexTSPvalue, // u8 / u8 Index number / Value of referred-to transparent slave parameter.
OT_FHBsize, // u8 / u8 Size of Fault-History-Buffer supported by slave
OT_FHBindexFHBvalue, // u8 / u8 Index number / Value of referred-to fault-history buffer entry.
OT_MaxRelModLevelSetting, // f8.8 Maximum relative modulation level setting (%)
OT_MaxCapacityMinModLevel, // u8 / u8 Maximum boiler capacity (kW) / Minimum boiler modulation level(%)
OT_TrSet, // f8.8 Room Setpoint (°C)
OT_RelModLevel, // f8.8 Relative Modulation Level (%)
OT_CHPressure, // f8.8 Water pressure in CH circuit (bar)
OT_DHWFlowRate, // f8.8 Water flow rate in DHW circuit. (litres/minute)
OT_DayTime, // special / u8 Day of Week and Time of Day
OT_Date, // u8 / u8 Calendar date
OT_Year, // u16 Calendar year
OT_TrSetCH2, // f8.8 Room Setpoint for 2nd CH circuit (°C)
OT_Tr, // f8.8 Room temperature (°C)
OT_Tboiler, // f8.8 Boiler flow water temperature (°C)
OT_Tdhw, // f8.8 DHW temperature (°C)
OT_Toutside, // f8.8 Outside temperature (°C)
OT_Tret, // f8.8 Return water temperature (°C)
OT_Tsolarstorage, // f8.8 Solar storage temperature (°C)
OT_Tsolarcollector, // s16 Solar collector temperature (°C)
OT_TflowCH2, // f8.8 Flow water temperature CH2 circuit (°C)
OT_Tdhw2, // f8.8 Domestic hot water temperature 2 (°C)
OT_Texhaust, // s16 Boiler exhaust temperature (°C)
OT_FanSpeed = 35, // u16 Fan Speed (rpm)
OT_ElectricalCurrentBurnerFlame, // f88 Electrical current through burner flame (µA)
OT_TRoomCH2, // f88 Room Temperature for 2nd CH circuit ("°C)
OT_RelativeHumidity, // u8 / u8 Relative Humidity (%)
OT_TdhwSetUBTdhwSetLB = 48, // s8 / s8 DHW setpoint upper & lower bounds for adjustment (°C)
OT_MaxTSetUBMaxTSetLB, // s8 / s8 Max CH water setpoint upper & lower bounds for adjustment (°C)
OT_HcratioUBHcratioLB, // s8 / s8 OTC heat curve ratio upper & lower bounds for adjustment
OT_TdhwSet = 56, // f8.8 DHW setpoint (°C) (Remote parameter 1)
OT_MaxTSet, // f8.8 Max CH water setpoint (°C) (Remote parameters 2)
OT_Hcratio, // f8.8 OTC heat curve ratio (°C) (Remote parameter 3)
OT_StatusVH = 70, // flag8 / flag8 Status Ventilation/Heat recovery
OT_ControlSetpointVH, // u8 Control setpoint V/H
OT_ASFFaultCodeVH, // flag8 / u8 Aplication Specific Fault Flags/Code V/H
OT_DiagnosticCodeVH, // u16 Diagnostic Code V/H
OT_ConfigMemberIDVH, // flag8 / u8 Config/Member ID V/H
OT_OpenthermVersionVH, // f8.8 OpenTherm Version V/H
OT_VersionTypeVH, // u8 / u8 Version & Type V/H
OT_RelativeVentilation, // u8 Relative Ventilation (%)
OT_RelativeHumidityExhaustAir, // u8 / u8 Relative Humidity (%)
OT_CO2LevelExhaustAir, // u16 CO2 Level (ppm)
OT_SupplyInletTemperature, // f8.8 Supply Inlet Temperature (°C)
OT_SupplyOutletTemperature, // f8.8 Supply Outlet Temperature(°C)
OT_ExhaustInletTemperature, // f8.8 Exhaust Inlet Temperature (°C)
OT_ExhaustOutletTemperature, // f8.8 Exhaust Outlet Temperature (°C)
OT_ActualExhaustFanSpeed, // u16 Actual Exhaust Fan Speed (rpm)
OT_ActualSupplyFanSpeed, // u16 Actual Supply Fan Speed (rpm)
OT_RemoteParameterSettingVH, // flag8 / flag8 Remote Parameter Setting V/H
OT_NominalVentilationValue, // u8 Nominal Ventilation Value
OT_TSPNumberVH, // u8 / u8 TSP Number V/H
OT_TSPEntryVH, // u8 / u8 TSP Entry V/H
OT_FaultBufferSizeVH, // u8 / u8 Fault Buffer Size V/H
OT_FaultBufferEntryVH, // u8 / u8 Fault Buffer Entry V/H
OT_RFstrengthbatterylevel=98, // u8 / u8 RF strength and battery level
OT_OperatingMode_HC1_HC2_DHW, // u8 / u8 Operating Mode HC1, HC2/ DHW
OT_RemoteOverrideFunction, // flag8 / - Function of manual and program changes in master and remote room setpoint.
OT_SolarStorageMaster, // flag8 / flag8 Solar Storage Master flags.
OT_SolarStorageASFflags, // flag8 / u8 / Solar Storage OEM-fault-code flag8 / u8 Application-specific fault flags and OEM fault code
OT_SolarStorageSlaveConfigMemberIDcode, // flag8 / u8 Solar Storage Master Configuration Flags / Master MemberID Code
OT_SolarStorageVersionType, // u8 / u8 / Solar Storage product version number and type
OT_SolarStorageTSP, // u8 / u8 / Solar Storage Number of Transparent-Slave-Parameters supported
OT_SolarStorageTSPindexTSPvalue, // u8 / u8 / Solar Storage Index number / Value of referred-to transparent slave parameter
OT_SolarStorageFHBsize, // u8 /u8 / Solar Storage Size of Fault-History-Buffer supported by slave
OT_SolarStorageFHBindexFHBvalue, // u8 /u8 / Solar Storage Index number / Value of referred-to fault-history buffer entry
OT_ElectricityProducerStarts, // u16 Electricity producer starts
OT_ElectricityProducerHours, //u16 Electricity producer hours
OT_ElectricityProduction, //u16 Electricity production
OT_CumulativElectricityProduction, // u16 Cumulativ Electricity production
OT_BurnerUnsuccessfulStarts, // u16 Number of Un-successful burner starts
OT_FlameSignalTooLow, //u16 Number of times flame signal too low
OT_OEMDiagnosticCode, // u16 OEM-specific diagnostic/service code
OT_BurnerStarts, // u16 Number of starts burner
OT_CHPumpStarts, // u16 Number of starts CH pump
OT_DHWPumpValveStarts, // u16 Number of starts DHW pump/valve
OT_DHWBurnerStarts, // u16 Number of starts burner during DHW mode
OT_BurnerOperationHours, // u16 Number of hours that burner is in operation (i.e. flame on)
OT_CHPumpOperationHours, // u16 Number of hours that CH pump has been running
OT_DHWPumpValveOperationHours, // u16 Number of hours that DHW pump has been running or DHW valve has been opened
OT_DHWBurnerOperationHours, // u16 Number of hours that burner is in operation during DHW mode
OT_OpenThermVersionMaster, // f8.8 The implemented version of the OpenTherm Protocol Specification in the master.
OT_OpenThermVersionSlave, // f8.8 The implemented version of the OpenTherm Protocol Specification in the slave.
OT_MasterVersion, // u8 / u8 Master product version number and type
OT_SlaveVersion, // u8 / u8 Slave product version number and type
OT_RemehadFdUcodes, // u8 / u8 Remeha dF-/dU-codes
OT_RemehaServicemessage, // u8 / u8 Remeha Servicemessage
OT_RemehaDetectionConnectedSCU, // u8 / u8 Remeha detection connected SCU’s
};
enum OTtype_t { ot_f88, ot_s16, ot_s8s8, ot_u16, ot_u8u8, ot_flag8, ot_flag8flag8, ot_special, ot_flag8u8, ot_u8, ot_undef};
enum OTmsgcmd_t { OT_READ, OT_WRITE, OT_RW, OT_UNDEF };
struct OTlookup_t
{
int id;
OTmsgcmd_t msg;
OTtype_t type;
char* label;
char* friendlyname;
char* unit;
};
OTlookup_t OTmap[] = {
{ 0, OT_READ , ot_flag8flag8, "Status", "Master and Slave status", "" },
{ 1, OT_WRITE , ot_f88, "TSet", "Control setpoint", "°C" },
{ 2, OT_WRITE , ot_flag8u8, "MasterConfigMemberIDcode", "Master Config / Member ID", "" },
{ 3, OT_READ , ot_flag8u8, "SlaveConfigMemberIDcode", "Slave Config / Member ID", "" },
{ 4, OT_RW , ot_u8u8, "Command", "Command-Code", "" },
{ 5, OT_READ , ot_flag8u8, "ASFflags", "Application-specific fault", "" },
{ 6, OT_READ , ot_flag8u8, "RBPflags", "Remote-parameter flags", "" },
{ 7, OT_WRITE , ot_f88, "CoolingControl", "Cooling control signal", "%" },
{ 8, OT_WRITE , ot_f88, "TsetCH2", "Control setpoint for 2e CH circuit", "°C" },
{ 9, OT_READ , ot_f88, "TrOverride", "Remote override room setpoint", "" },
{ 10, OT_READ , ot_u8u8, "TSP", "Number of Transparent-Slave-Parameters supported by slave", "" },
{ 11, OT_RW , ot_u8u8, "TSPindexTSPvalue", "Index number / Value of referred-to transparent slave parameter", "" },
{ 12, OT_READ , ot_u8u8, "FHBsize", "Size of Fault-History-Buffer supported by slave", "" },
{ 13, OT_READ , ot_u8u8, "FHBindexFHBvalue", "Index number / Value of referred-to fault-history buffer entry", "" },
{ 14, OT_WRITE , ot_f88, "MaxRelModLevelSetting", "Maximum relative modulation level setting", "%" },
{ 15, OT_READ , ot_u8u8, "MaxCapacityMinModLevell", "Maximum boiler capacity (kW) / Minimum boiler modulation level(%)", "kW/%" },
{ 16, OT_WRITE , ot_f88, "TrSet", "Room Setpoint", "°C" },
{ 17, OT_READ , ot_f88, "RelModLevel", "Relative Modulation Level", "%" },
{ 18, OT_READ , ot_f88, "CHPressure", "Water pressure in CH circuit", "bar" },
{ 19, OT_READ , ot_f88, "DHWFlowRate", "Water flow rate in DHW circuit", "l/m" },
{ 20, OT_RW , ot_special, "DayTime", "Day of Week and Time of Day", "" },
{ 21, OT_RW , ot_u8u8, "Date", "Calendar date ", "" },
{ 22, OT_RW , ot_u16, "Year", "Calendar year", "" },
{ 23, OT_WRITE , ot_f88, "TrSetCH2", "Room Setpoint for 2nd CH circuit", "°C" },
{ 24, OT_WRITE , ot_f88, "Tr", "Room Temperature", "°C" },
{ 25, OT_READ , ot_f88, "Tboiler", "Boiler flow water temperature", "°C" },
{ 26, OT_READ , ot_f88, "Tdhw", "DHW temperature", "°C" },
{ 27, OT_READ , ot_f88, "Toutside", "Outside temperature", "°C" },
{ 28, OT_READ , ot_f88, "Tret", "Return water temperature", "°C" },
{ 29, OT_READ , ot_f88, "Tsolarstorage", "Solar storage temperature", "°C" },
{ 30, OT_READ , ot_s16, "Tsolarcollector", "Solar collector temperature", "°C" },
{ 31, OT_READ , ot_f88, "TflowCH2", "Flow water temperature CH2 circuit", "°C" },
{ 32, OT_READ , ot_f88, "Tdhw2", "Domestic hot water temperature 2", "°C" },
{ 33, OT_READ , ot_s16, "Texhaust", "Boiler exhaust temperature", "°C" },
{ 34, OT_UNDEF , ot_undef, "", "", "" },
{ 35, OT_READ , ot_u16, "FanSpeed", "fan speed", "rpm" },
{ 36, OT_READ , ot_f88, "ElectricalCurrentBurnerFlame", "Electrical current through burner flame", "µA" },
{ 37, OT_READ , ot_f88, "TRoomCH2", "Room temperature for 2nd CH circuit", "°C" },
{ 38, OT_READ , ot_u8u8, "RelativeHumidity", "Relative Humidity", "%" },
{ 39, OT_UNDEF , ot_undef, "", "", "" },
{ 40, OT_UNDEF , ot_undef, "", "", "" },
{ 41, OT_UNDEF , ot_undef, "", "", "" },
{ 42, OT_UNDEF , ot_undef, "", "", "" },
{ 43, OT_UNDEF , ot_undef, "", "", "" },
{ 44, OT_UNDEF , ot_undef, "", "", "" },
{ 45, OT_UNDEF , ot_undef, "", "", "" },
{ 46, OT_UNDEF , ot_undef, "", "", "" },
{ 47, OT_UNDEF , ot_undef, "", "", "" },
{ 48, OT_READ , ot_s8s8, "TdhwSetUBTdhwSetLB", "DHW setpoint upper & lower bounds for adjustment", "°C" },
{ 49, OT_READ , ot_s8s8, "MaxTSetUBMaxTSetLB", "Max CH water setpoint upper & lower bounds for adjustment", "°C" },
{ 50, OT_READ , ot_s8s8, "HcratioUBHcratioLB", "OTC heat curve ratio upper & lower bounds for adjustment", "" },
{ 51, OT_UNDEF , ot_undef, "", "", "" },
{ 52, OT_UNDEF , ot_undef, "", "", "" },
{ 53, OT_UNDEF , ot_undef, "", "", "" },
{ 54, OT_UNDEF , ot_undef, "", "", "" },
{ 55, OT_UNDEF , ot_undef, "", "", "" },
{ 56, OT_RW , ot_f88, "TdhwSet", "DHW setpoint", "°C" },
{ 57, OT_RW , ot_f88, "MaxTSet", "MaxCH water setpoint", "°C" },
{ 58, OT_RW , ot_f88, "Hcratio", "OTC heat curve ratio", "°C" },
{ 59, OT_UNDEF , ot_undef, "", "", "" },
{ 60, OT_UNDEF , ot_undef, "", "", "" },
{ 61, OT_UNDEF , ot_undef, "", "", "" },
{ 62, OT_UNDEF , ot_undef, "", "", "" },
{ 63, OT_UNDEF , ot_undef, "", "", "" },
{ 64, OT_UNDEF , ot_undef, "", "", "" },
{ 65, OT_UNDEF , ot_undef, "", "", "" },
{ 66, OT_UNDEF , ot_undef, "", "", "" },
{ 67, OT_UNDEF , ot_undef, "", "", "" },
{ 68, OT_UNDEF , ot_undef, "", "", "" },
{ 69, OT_UNDEF , ot_undef, "", "", "" },
{ 70, OT_READ , ot_flag8flag8, "StatusVH", "Status Ventilation/Heat recovery", "" },
{ 71, OT_WRITE , ot_u8, "ControlSetpointVH", "Control setpoint V/H", "" },
{ 72, OT_READ , ot_flag8u8, "ASFFaultCodeVH", "Application-specific Fault Flags/Code V/H", "" },
{ 73, OT_READ , ot_u16, "DiagnosticCodeVH", "Diagnostic Code V/H", "" },
{ 74, OT_READ , ot_flag8u8, "ConfigMemberIDVH", "Config/Member ID V/H", "" },
{ 75, OT_READ , ot_f88, "OpenthermVersionVH", "OpenTherm Version V/H", "" },
{ 76, OT_READ , ot_u8u8, "VersionTypeVH", "Version & Type V/H", "" },
{ 77, OT_READ , ot_u8, "RelativeVentilation", "Relative Ventilation", "%" },
{ 78, OT_RW , ot_u8u8, "RelativeHumidityExhaustAir", "Relative Humidity Exaust Air", "%" },
{ 79, OT_RW , ot_u16, "CO2LevelExhaustAir", "CO2 Level Exhaust Air", "ppm" },
{ 80, OT_READ , ot_f88, "SupplyInletTemperature", "Supply Inlet Temperature", "°C" },
{ 81, OT_READ , ot_f88, "SupplyOutletTemperature", "Supply Outlet Temperature", "°C" },
{ 82, OT_READ , ot_f88, "ExhaustInletTemperature", "Exhaust Inlet Temperature", "°C" },
{ 83, OT_READ , ot_f88, "ExhaustOutletTemperature", "Exhaust Outlet Temperature", "°C" },
{ 84, OT_READ , ot_u16, "ActualExhaustFanSpeed", "Actual Exhaust Fan Speed", "rpm" },
{ 85, OT_READ , ot_u16, "ActualSupplyFanSpeed", "Actual Supply Fan Speed", "rpm" },
{ 86, OT_READ , ot_flag8flag8, "RemoteParameterSettingVH", "Remote Parameter Setting V/H", "" },
{ 87, OT_RW , ot_u8, "NominalVentilationValue", "Nominal Ventilation Value", "" },
{ 88, OT_READ , ot_u8u8, "TSPNumberVH", "TSP Number V/H", "" },
{ 89, OT_RW , ot_u8u8, "TSPEntryVH", "TSP Entry V/H", "" },
{ 90, OT_READ , ot_u8u8, "FaultBufferSizeVH", "Fault Buffer Size V/H", "" },
{ 91, OT_READ , ot_u8u8, "FaultBufferEntryVH", "Fault Buffer Entry V/H", "" },
{ 92, OT_UNDEF , ot_undef, "", "", "" },
{ 93, OT_UNDEF , ot_undef, "", "", "" },
{ 94, OT_UNDEF , ot_undef, "", "", "" },
{ 95, OT_UNDEF , ot_undef, "", "", "" },
{ 96, OT_UNDEF , ot_undef, "", "", "" },
{ 97, OT_UNDEF , ot_undef, "", "", "" },
{ 98, OT_READ , ot_u8u8, "RFstrengthbatterylevel", "RF strength and battery level", "" },
{ 99, OT_READ , ot_u8u8, "OperatingMode_HC1_HC2_DHW", "Operating Mode HC1, HC2/ DHW", "" },
{ 100, OT_READ , ot_flag8, "RoomRemoteOverrideFunction", "Function of manual and program changes in master and remote room setpoint.", "" },
{ 101, OT_READ , ot_flag8flag8, "SolarStorageMaster", "Solar Storage Master mode", "" },
{ 102, OT_READ , ot_flag8u8, "SolarStorageASFflags", "Solar Storage Application-specific flags and OEM fault", "" },
{ 103, OT_READ , ot_flag8u8, "SolarStorageSlaveConfigMemberIDcode", "Solar Storage Slave Config / Member ID", "" },
{ 104, OT_READ , ot_u8u8, "SolarStorageVersionType", "Solar Storage product version number and type", "" },
{ 105, OT_READ , ot_u8u8, "SolarStorageTSP", "Solar Storage Number of Transparent-Slave-Parameters supported", "" },
{ 106, OT_RW , ot_u8u8, "SolarStorageTSPindexTSPvalue", "Solar Storage Index number / Value of referred-to transparent slave parameter", "" },
{ 107, OT_READ , ot_u8u8, "SolarStorageFHBsize", "Solar Storage Size of Fault-History-Buffer supported by slave", "" },
{ 108, OT_READ , ot_u8u8, "SolarStorageFHBindexFHBvalue", "Solar Storage Index number / Value of referred-to fault-history buffer entry", "" },
{ 109, OT_READ , ot_u16, "ElectricityProducerStarts", "Electricity producer starts", "" },
{ 110, OT_READ , ot_u16, "ElectricityProducerHours", "Electricity producer hours", "" },
{ 111, OT_READ , ot_u16, "ElectricityProduction", "Electricity production", "" },
{ 112, OT_READ , ot_u16, "CumulativElectricityProduction", "Cumulativ Electricity production", "" },
{ 113, OT_RW , ot_u16, "BurnerUnsuccessfulStarts", "Nr of un-successful burner starts", "" },
{ 114, OT_RW , ot_u16, "FlameSignalTooLow", "Nr of times flame signal was too low", "" },
{ 115, OT_READ , ot_u16, "OEMDiagnosticCode", "OEM-specific diagnostic/service code", "" },
{ 116, OT_RW , ot_u16, "BurnerStarts", "Nr of starts burner", "" },
{ 117, OT_RW , ot_u16, "CHPumpStarts", "Nr of starts CH pump", "" },
{ 118, OT_RW , ot_u16, "DHWPumpValveStarts", "Nr of starts DHW pump/valve", "" },
{ 119, OT_RW , ot_u16, "DHWBurnerStarts", "Nr of starts burner during DHW mode", "" },
{ 120, OT_RW , ot_u16, "BurnerOperationHours", "Nr of hours that burner is in operation (i.e. flame on)", "" },
{ 121, OT_RW , ot_u16, "CHPumpOperationHours", "Nr of hours that CH pump has been running", "" },
{ 122, OT_RW , ot_u16, "DHWPumpValveOperationHours", "Nr of hours that DHW pump has been running or DHW valve has been opened ", "" },
{ 123, OT_RW , ot_u16, "DHWBurnerOperationHours", "Nr of hours that burner is in operation during DHW mode", "" },
{ 124, OT_READ , ot_f88, "OpenThermVersionMaster", "Master Version OpenTherm Protocol Specification", "" },
{ 125, OT_READ , ot_f88, "OpenThermVersionSlave", "Slave Version OpenTherm Protocol Specification", "" },
{ 126, OT_READ , ot_u8u8, "MasterVersion", "Master product version number and type", "" },
{ 127, OT_READ , ot_u8u8, "SlaveVersion", "Slave product version number and type", "" },
{ 128, OT_UNDEF , ot_undef, "", "", "" },
{ 129, OT_UNDEF , ot_undef, "", "", "" },
{ 130, OT_UNDEF , ot_undef, "", "", "" },
{ 131, OT_RW , ot_u8u8, "RemehadFdUcodes", "Remeha dF-/dU-codes", "" },
{ 132, OT_READ , ot_u8u8, "RemehaServicemessage", "Remeha Servicemessage", "" },
{ 133, OT_READ , ot_u8u8, "RemehaDetectionConnectedSCU", "Remeha detection connected SCU’s", "" },
// all data ids are not defined above are resevered for future use
};
#define OT_MSGID_MAX 133
time_t msglastupdated[255] = {0}; //all msg, even if they are unknown
struct OT_cmd_t { // see all possible commands for PIC here: https://otgw.tclcode.com/firmware.html
char cmd[15];
int cmdlen;
int retrycnt;
time_t due;
};
#define CMDQUEUE_MAX 20
struct OT_cmd_t cmdqueue[CMDQUEUE_MAX];
static int cmdptr = 0;
enum OpenThermStatus {
OT_NOT_INITIALIZED,
OT_READY,
OT_DELAY,
OT_REQUEST_SENDING,
OT_RESPONSE_WAITING,
OT_RESPONSE_START_BIT,
OT_RESPONSE_RECEIVING,
OT_RESPONSE_READY,
OT_RESPONSE_INVALID
};
/**
* Structure to hold Opentherm data packet content.
* Use f88(), u16() or s16() functions to get appropriate value of data packet accoridng to id of message.
*/
/**
* Structure to hold Opentherm data packet content.
* Use f88(), u16() or s16() functions to get appropriate value of data packet according to id of message.
*/
struct OpenthermData {
byte type;
byte id;
byte valueHB;
byte valueLB;
/**
* @return float representation of data packet value
*/
float f88();
/**
* @param float number to set as value of this data packet
*/
void f88(float value);
/**
* @return unsigned 16b integer representation of data packet value
*/
uint16_t u16();
/**
* @param unsigned 16b integer number to set as value of this data packet
*/
void u16(uint16_t value);
/**
* @return signed 16b integer representation of data packet value
*/
int16_t s16();
/**
* @param signed 16b integer number to set as value of this data packet
*/
void s16(int16_t value);
};
#endif
/***************************************************************************
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to permit
* persons to whom the Software is furnished to do so, subject to the
* following conditions:
*
* The above copyright notice and this permission notice shall be included
* in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
* IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
* CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT
* OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR
* THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
***************************************************************************/
View Git Blame Copy Permalink