dn42/wiki
1
Fork 0
mirror of https://git.dn42.dev/wiki/wiki.git synced 2025-02-28 22:13:02 +01:00
Code Releases Activity

Updated Quagga (markdown)

Browse Source
This commit is contained in:
siska 2015-06-23 13:09:04 +02:00
parent 1ad7591808
commit a325289f4f
1 changed files with 37 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

37
howto/Quagga.md
View File

@ -20,6 +20,43 @@ To connect to bgpd use:
Which provides an interactive interface.
In this interface the following commands can be used:
The following text use this placeholders:
- `<AS>` your Autonomous System Number (only the digits)
- `<GATEWAY_IP>` your gateway ip (the internal dn42 ip address you use on the host, where dn42 is running)
- `<SUBNET>` your registered dn42 subnet, which you allocated on [nixnodes](https://io.nixnodes.net/)
- `<PEER_IP>` dn42 ip of your peer who is connected with you using your favorite vpn/tunnel protocol (openvpn, ipsec, tinc, ...)
- `<INTERFACE>` Interface which is used to connect to the peer, in case of openvpn it is the tun device
- `<PEER_AS>` Autonomous System Number of your peer (only the digits)
## Configure a new ipv6 peering
In your interactive vtysh session type the following:
```
vtysh> configure terminal
vtysh> router bgp <AS>
vtysh> neighbor <PEER_IP> remote-as <PEER_AS>
vtysh> neighbor <PEER_IP> peer-group dn
vtysh> neighbor <PEER_IP> interface <INTERFACE>
vtysh> no neighbor <PEER_IP> activate
vtysh> exit
vtysh> address-family ipv6
vtysh> neighbor <PEER_IP> activate
vtysh> neighbor <PEER_IP> soft-reconfiguration inbound
vtysh> exit
```
## Configure a new ipv4 peering
```
vtysh> configure terminal
vtysh> router bgp <AS>
vtysh> neighbor <PEER_IP> remote-as <PEER_AS>
vtysh> neighbor <PEER_IP> peer-group dn
vtysh> neighbor <PEER_IP> interface <INTERFACE>
vtysh> exit
```
# show bpg session status